Objective: To analyze the epidemiological characteristics of pulmonary tuberculosis (PTB) among college students in Yangzhou from 2020 to 2024, so as to provide a scientific basis for developing prevention and control strategies. Methods: An epidemiological investigation was conducted among 162 college students with PTB, and 7 134 of their contacts were screened. Data were obtained from the tuberculosis information management system and on campus screening records. Using descriptive epidemiological methods, trends in incidence, seasonal distribution, and bacteriological characteristics were analyzed. Results: From 2020 to 2024, the annual average incidence of pulmonary tuberculosis among college students in Yangzhou was 29.42 per 100 000, showing an overall fluctuating downward trend ( χ 2=12.36, P <0.01). Cases were mainly concentrated in summer and autumn, with the highest proportion in autumn (41.36%, 67/162), followed by summer (23.46%, 38/162). The proportion of etiologically positive cases increased from 37.21% in 2020 to 71.43% in 2024; among positive cases, the proportion of latent tuberculosis infection (LTBI) decreased from 66.67% (10/15) to 26.67% (4/15). The etiological positive rate was higher in females than in males ( χ 2= 11.76 , P <0.01). Comparison of screening methods showed that among index cases, the LTBI detection rate of the recombinant Mycobacterium tuberculosis fusion protein skin test (C-TST) was higher than that of the tuberculin skin test (TST), but the difference was not statistically significant ( χ 2=0.65, P =0.42); among close contacts, the detection rate of TST was higher than that of C-TST (15.1%,10.1%; χ 2=5.23, P <0.05). Conclusion From 2020 to 2024, the annual average incidence of pulmonary tuberculosis among college students in Yangzhou showed an overall fluctuating downward trend, with differences in TB infection screening methods and gender.

To address the growing challenge of an increasing number of elderly lung cancer patients amidst China's aging population and to fill the gap in quality control standards for surgical treatment in this special population, this study aimed to develop a standardized surgical evaluation system for elderly lung cancer patients tailored to China's national conditions. The system was established through a literature review, integrated the pathophysiological characteristics of elderly patients, and was constructed following review, feedback, and revision by experts from multiple thoracic surgery centers. Employing a 100-point scoring system, it comprises three primary domains: physical infrastructure and geriatric adaptability foundational conditions (10 points); management level and perioperative care models (20 points); and technical proficiency and clinical outcomes (70 points). The system places a strong emphasis on geriatric adaptability, proposing specific, quantifiable indicators for age-friendly facility modifications, control of elderly-specific complications, multidisciplinary collaboration, and standardized perioperative management. It provides a convenient and measurable assessment tool for quality control in the surgical treatment of elderly lung cancer in China, which is expected to promote the standardization and homogenization of diagnosis and treatment.

ObjectiveTo investigate the current status of ethical sensitivity among clinical nursing interns in the context of artificial intelligence （AI） and analyze its influencing factors. MethodsAdopting mixed research methods and convenience sampling， a total of 237 nursing interns from a tertiary A hospital in Xi’an were selected as research subjects. Data were collected using a general information questionnaire and the Nursing Students’ Ethical Sensitivity Scale， and semi-structured interviews were conducted with 8 nursing interns. ResultsThe total score of ethical sensitivity among nursing interns was （33.98±6.32）， which was at a moderate level. Multiple linear regression analysis revealed that academic degree （undergraduate： β=0.147， P<0.05； postgraduate： β=0.139， P<0.05）， affinity for the nursing profession （β=0.118， P<0.05）， whether they had taken nursing ethics courses （β=-0.124， P<0.05）， and familiarity with artificial intelligence （β=-0.159，P<0.05） were influencing factors of ethical sensitivity among nursing interns. Four themes were extracted from semi-structured interviews， namely， the incomplete mastery of nursing ethics-related knowledge among nursing interns， weakened ethical sensitivity in the AI teaching scenario of nursing interns， insufficient professional identity affecting the development of nursing interns’ ethical sensitivity， and technological dependence leading to the lack of humanistic care among nursing interns. ConclusionEthical sensitivity of nursing interns represents a moderate level， primarily influenced by educational background， degree of fondness for the nursing profession， learning experience of nursing ethics courses， and familiarity with AI. Nursing educators and clinical administrators urgently need to establish a sustainable school-hospital collaborative model of nursing ethics education， attach importance to the cultivation of ethical awareness and value guidance for nursing interns， and strengthen the intensity and depth of nursing ethics education among nursing interns， thereby improving their level of ethical sensitivity in the context of AI.

Objective Jejunal interposition is an important option for restoring gastrointestinal continuity in patients with complex esophageal cancer in whom the stomach is unavailable for reconstruction due to previous gastrectomy, tumor involvement, failed gastric conduit, or other constraints. Although the jejunum offers a caliber similar to the esophagus, a rich blood supply, and preserved peristaltic function, anatomical variations in mesenteric length and vascular arcades render long-segment and high-level reconstruction susceptible to excessive tension, mesenteric torsion, venous congestion, and inadequate distal perfusion. This consensus aims to provide standardized recommendations for the application of jejunal interposition in this specific patient population. Methods This consensus was developed in accordance with the WHO Handbook for Guideline Development and Chinese national guideline development standards, with reference to the Appraisal of Guidelines for Research & Evaluation Ⅱ(AGREE Ⅱ), Reporting Items for Practice Guidelines in Healthcare (RIGHT), and Scientific, Transparent and Applicable Rankings (STAR) checklists. The project was registered on the international practice guidelines registry platform (PREPARE-2026CN1384). The working group systematically searched Chinese and English evidence addressing 12 clinical questions. Evidence was graded using the Oxford Centre for Evidence-Based Medicine (OCEBM) 2009 system, with structured appraisal of risk of bias, inconsistency, indirectness, and imprecision. Recommendations were formulated through two rounds of Delphi surveys and a face-to-face consensus meeting, with an agreement threshold of ≥75%. Results The consensus generated 12 recommendations covering indications, selection between jejunum and colon, preoperative assessment, surgical approach and reconstruction route, pedicled jejunal interposition (PJI), supercharged pedicled jejunal interposition (SPJ), indocyanine green (ICG) perfusion assessment, perioperative nutrition, management of anastomotic leakage, long-term follow-up, and special treatment scenarios. Given that the available direct evidence is predominantly derived from single-center retrospective cohorts and case series, recommendations extrapolated from general esophagectomy or other gastrointestinal surgical evidence are deliberately phrased with caution. Conclusion Jejunal interposition is a safe and effective approach for digestive tract reconstruction in patients with complex esophageal cancer in whom the stomach is unavailable. This consensus emphasizes that clinical decision-making should be individualized based on the patient's prior treatment history, reconstruction height, vascular anatomy, technical availability, and institutional experience in the Chinese context.

Laparoscopic subtotal cholecystectomy (LSC) has been a safe and viable alternative to conversion to laparotomy in cases of severe cholecystitis. The objective of this study is to determine the utility of intraoperative choledochoscopy in LSC for the exploration of the gallbladder, cyst duct, and subsequent stone clearance of the cystic duct in cases of severe cholecystitis. A total of 72 patients diagnosed with severe cholecystitis received choledochoscopy-assisted laparoscopic subtotal cholecystectomy (CALSC). A choledochoscopy was performed to explore the gallbladder cavity and/or cystic duct, and to extract stones using a range of techniques. The clinical records, including the operative records and outcomes, were subjected to analysis. No LSC was converted to open surgery, and no bile duct or vascular injuries were sustained. All stones within the cystic duct were removed by a combination of techniques, including high-frequency needle knife electrotomy, basket, and electrohydraulic lithotripsy. A follow-up examination revealed the absence of residual bile duct stones, with the exception of one common bile duct stone, which was extracted via endoscopic retrograde cholangiopancreatography. In certain special cases, CALSC may prove to be an efficacious treatment for the management of severe cholecystitis. This technique allows for optimal comprehension of the situation within the gallbladder cavity and cystic duct, facilitating the removal of stones from the cystic duct and reducing the residue of the non-functional gallbladder remnant.

The plants of the genus Caragana Fabr. are desert plants of the Leguminosae family, which are widely used in traditional ethnomedicine, with the effects of nourishing Yin and nourishing blood, dispelling wind and removing dampness, clearing heat and detoxifying toxins. The anti-inflammatory effect of Caragana Fabr. has attracted much attention, the research on the related mechanism has made some progress, but it lacks systematic collation. By summarising the anti-inflammatory effects of the active ingredients of Caragana Fabr., the authors found that they have good anti-inflammatory activities on different inflammatory cell models in vitro, and have good improvement effects on rheumatoid arthritis, colitis, complex nephritis, and acute lung injury and other disease models. The anti-inflammatory effects of the active components of this genus mainly include the reduction of the levels of a variety of pro-inflammatory factors, and the signalling pathways involved mainly include TLR4/NF-κB, TLR4/MAPK, TLR4/NF-κB/IRF3, JAK/STAT-1, ERK/STAT-1 and so on. Therefore, the paper mainly reviews the research progress on the anti-inflammatory effects and mechanisms of the Caragana Fabr. plants and their active components according to disease types, with a view to providing reference for the in-depth study of their anti-inflammatory activities and the development of new products with related functions.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.