ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

A 71-year-old male presented with esophageal cancer and severe aortic valve regurgitation. Treatment strategies for such patients are controversial. Considering the risks of cardiopulmonary bypass and potential esophageal cancer metastasis, we successfully performed transcatheter aortic valve implantation and minimally invasive three-incision thoracolaparoscopy combined with radical resection of esophageal cancer (McKeown) simultaneously in the elderly patient who did not require neoadjuvant treatment. This dual minimally invasive procedure took 6 hours and the patient recovered smoothly without any surgical complications.

ObjectiveTo explore the mechanism by which the ethanol extract of Epimedium brevicornu （EEBM） intervenes in mesenchymal adipose-derived stem cells （ADSCs） to delay aging in castrated rats. MethodsForty-five 3-month-old SPF female SD rats were ovariectomized and randomly divided into model group， ADSCs treatment group， and ADSCs groups treated with low， medium， and high concentrations of EEBM （1， 50， 100 μg·L^-1）， referred to as the AE low， medium， and high concentration groups， with 9 rats in each group. After tail vein injection of 200 μL of the corresponding stem cell suspension， aging-related indicators including cyclin-dependent kinase inhibitor （p21）， tumor suppressor gene （p53）， interleukin-6 （IL-6）， interleukin-8 （IL-8）， superoxide dismutase （SOD）， malondialdehyde （MDA）， B-cell lymphoma-2 （Bcl-2）， Bcl-2-associated X protein （Bax）， cysteine-aspartic acid protease-3 （Caspase-3）， and lipofuscin were measured using enzyme-linked immunosorbent assay （ELISA） and Western blot. ResultsCompared with the model group， the IL-6 content in the AE low， medium， and high concentration groups was significantly decreased （P<0.05）. Lipofuscin， MDA， and IL-8 levels in the ADSCs treatment group and AE low， medium， and high concentration groups were significantly reduced （P<0.01）， while SOD content was significantly increased （P<0.05， P<0.01）. Compared with the ADSCs treatment group， lipofuscin and IL-8 levels in the AE low， medium， and high concentration groups were significantly reduced （P<0.05， P<0.01）. The MDA content was significantly decreased in the AE medium concentration group （P<0.01）. Compared with the model group， protein levels of p21， p53， Bax， and Caspase-3 in the ADSCs treatment group and AE low， medium， and high concentration groups were significantly reduced （P<0.05， P<0.01）， while the Bcl-2 protein level was significantly increased （P<0.01）. Compared with the ADSCs treatment group， protein levels of p21， p53， Bax， and Caspase-3 in the AE low， medium， and high concentration groups were significantly reduced （P<0.05， P<0.01）， and the Bcl-2 protein level in the AE low concentration group was significantly increased （P<0.01）. ConclusionThe results of this experiment show that EEBM-treated ADSCs or ADSCs may delay aging in castrated rats by inhibiting cell apoptosis， reducing cell cycle inhibitors and pro-inflammatory factors， enhancing antioxidant capacity， and reducing oxidative reactions. Moreover， EEBM-treated ADSCs demonstrate stronger anti-aging effects than ADSCs alone. This study provides experimental evidence supporting the clinical use of EEBM to intervene in ADSCs and delay aging.

Atopic dermatitis （AD） is a common pruritic and chronic inflammatory dermatosis in clinical practice and is one of the diseases responding specifically to traditional Chinese medicine （TCM）. With the launch of biological agents and small molecule drugs and the development and implementation of guidelines of diagnosis and treatment， clinical pathways of treatment of moderate to severe AD， and consensus on the whole-process management of AD， the clinical efficacy of moderate to severe AD has been significantly improved. However， there are still many unmet clinical needs that require more effective methods to meet. In response to the Opinions of the CPC Central Committee and the State Council on Facilitating the Inheritance， Innovation， and Development of Traditional Chinese Medicine and the spirit of the National Conference on TCM， the China Association of Chinese Medicine organized more than 20 experts in TCM dermatology， Western medicine dermatology， interdisciplinary fields， and industries to discuss the difficulties and advantages of TCM in the treatment of AD. TCM treatment for AD can not only improve rash and relieve itching but also solve many concomitant syndromes. The abundant external treatment methods of TCM have advantages for different special populations and rash characteristics. The concept of treating disease before its onset in TCM is in line with the chronic disease management mode of prevention and treatment of atopic march and prevention of recurrence. In addition， TCM therapy can reduce the use of topical glucocorticoids and has good safety. Regarding the comorbidity of AD， equal emphasis on TCM and Western medicine and multidisciplinary joint treatment should be advocated to achieve maximum benefit for patients. The exchange of TCM and Western medicine has clarified the positioning and advantages of TCM intervention in AD， providing guidance for clinical and scientific research.

Objective To compare clinical efficacy of robot-assisted(RA)and remote sensing navigation alignment(RSNA)system-assisted total knee arthroplasty(TKA).Methods From March 2023 to June 2023,60 patients who underwent the first unilateral TKA due to severe knee osteoarthritis(KOA)were admitted and divided into RSNA group and RA group according to different treatment methods,with 30 patients in each group.There were 5 males and 25 females in RSNA group,aged from 56 to 81 years old with an average of(66.33±7.16)years old;body mass index(BM1)ranged from 19.87 to 38.54 kg·m-2 with an average of(28.40±6.18)kg·m-2;the courses of disease ranged from 5 to 36 months with an average of(18.20±8.98)months;RSNA system was used to assist the positioning of osteotomy.There were 7 males and 23 females in RA group,aged from 55 to 82 years old with an average of(67.83±8.61)years old;BMI ranged from 19.67 to 37.25 kg·m-2 with an aver-age of(28.01±4.89)kg·m-2;the courses of disease ranged from 3 to 33 months with an average of(17.93±9.20)months;RA was performed.Operation time,incision length,latent blood loss at 2 weeks after operation and incidence of lower extremity thrombosis were compared between two groups.Hip-knee ankle angle(HKAA),HKAA deviation,lateral distal femoral angle(LDFA),medial proximal tibial angle(MPTA)and posterior tibial slope(PTS)were compared between two groups;Western Ontario McMaster Universities Osteoarthritis Index(WOMAC)and Knee Society score(KSS)were used to evaluate functional recovery before operation,3 and 6 months after operation.Results The operation was performed successfully in both groups,and there were no serious complications such as vascular and nerve injury during operation.The wound healed well at stage Ⅰafter operation,and the follow-up time was 6 months.The operation time,latent blood loss at 2 weeks after operation and inci-sion length in RSNA group were(94.35±5.75)min,(130.54±17.53)mland(14.73±2.14)cm,respectively;while(102.57±6.88)min,(146.33±19.47)ml and(16.78±2.32)cm in RA group,respectively.RSNA group was better than RA group(P＜0.05).No deep vein thrombosis occurred in both groups at 2 weeks after operation,5 patients occurred intermuscular vein throm-bosisin in RSNA group and 8 patients in RA group,the difference was not statistically significant(P＞0.05).In RSNA group,HKAA,LDFA and MPTA were(173.00±5.54)°,(86.96±3.45)°,(82.79±3.35)° before operation,and(178.34±1.85)°,(89.92±0.42)°,(89.84±0.73)° at 1 week after operation,respectively.In RA group,HKAA,LDFA and MPTA were(173.31±6.48)°,(87.15±3.40)° and(82.99±3.05)° before operation,and(178.52±1.79)°,(90.03±0.39)° and(90.15±0.47)° at 1 week after operation,respectively.HKAA,LDFA and MPTA were significantly improved in both groups at 1 week after oper-ation(P＜0.05).There were no significant difference in HKAA,LDFA,MPTA and PTS between two groups before operation and 1 week after operation(P＞0.05).There was no significant difference in deviation distribution of HKAA at 1 week after op-eration(x2=2.61 1,P=0.456).There were no significant difference in WOMAC and KSS between two groups before operation,3 and 6 months after operation(P＞0.05),and postoperative WOMAC and KSS at 3 and 6 months between two groups were im-proved compared with those before operation(P＜0.05).Conclusion Both RA and RSNA system assisted TKA could obtain ac-curate osteotomy,RA has higher surgical accuracy,RSNA system assisted operation has less trauma,and operation is simpler.

Objective To explore clinical accuracy of remote sensing navigation alignment(RSNA)system in total knee arthroplasty(TKA)and its influence on postoperative clinical efficacy.Methods From May 2021 to May 2022,60 knee os-teoarthritis(KOA)patients with Kellgren-Lawrence(K-L)grade Ⅲ to Ⅳ treated by unilateral primary TKA were selected and divided into RSNA group and traditional operation group according to treatment methods,and 30 patients in each group.There were 6 males and 24 females in RSNA group,aged from 55 to 86 years old with an average of(68.06±8.23)years old;body mass index(BMI)ranged from 22.15 to 34.58 kg·m-2 with an average of(28.20±3.01)kg·m-2;the courses of disease ranged from 2 to 60 months with an average of(18.80±14.80)months;13 patients with grade Ⅲ and 17 patients with grade Ⅳaccording to K-L grading.In traditional operation group,there were 8 males and 22 females,aged from 57 to 85 years old with an average of(67.26±6.32)years old;BMI ranged from 23.94 to 34.55 kg·m-2 with an average of(27.49±2.32)kg·m-2;the courses of disease ranged from 3 to 60 months with an average of(21.30±16.44)months;14 patients with grade Ⅲ and 16 pa-tients with grade Ⅳ according to K-L grading.Western Ontario and McMaster Universities(WOMAC)osteoarthritis index and Knee Society score(KSS)were used to evaluate functional recovery of patients.Hip-knee-ankle angle(HKAA),distal femoral valgus angle(FVA)and distal fermoral flexion angle(DFFA)were measured before operation.HKAA and HKAA deviation angle were measured at 1 week after operation,and defective rate of lower limb force line,femur prosthesis valgus angle(FP-VA)and femoral prosthesis flexion angle(FPFA),respectively,were calculated.Results There were no serious complications such as vascular and nerve injury during operation,and wound healed at stage Ⅰ.Both groups were followed up for 6 months.There were no significant difference in WOMAC index,KSS,HKAA,FVA and DFFA between two groups before operation(P＞0.05).The force line defect rate,HKAA,HKAA deviation angle,FPVA deviation angle and FPFA of RSNA group were 6.7％,(178.74±1.56)°,(1.25±1.56)°,(1.84±0.16)° and(4.85±2.46)°,respectively;while in traditional operation group were 20％,(176.73±3.46)°,(3.27±3.46)°,(2.44±0.26)°,(6.60±1.86)°;the difference between two groups were statistically sig-nificant(P＜0.05).There were no significant difference in WOMAC index and KSS between two groups at 3 and 6 months after operation(P＞0.05).Conclusion RSNA system could reduce defective rate of lower limb force line,FPVA deviation angle and FPFA after TKA,which is more accurate and easy to operate than traditional intramedullary localization surgery while ensuring postoperative efficacy.

Objective To explore the effect of cardiac shock wave therapy(CSWT)on ST deviation of electrocardiogram and myocardial perfusion imaging in coronary artery disease(CAD)patients.Methods CAD patients who received CSWT in Cardiology Department of Beijing Hospital from December 2016 to August 2022 were enrolled.Three months of CSWT were conducted with a total of 9 times shock wave treatment.Clinical data,myocardial perfusion imaging data and stress electrocardiogram data were collected.Myocardial perfusion score,electrocardiographic data were compared before and after CSWT.Results A total of 55 patients were finally enrolled.There were 43 male and 12 female patients with an average age of(67.45±8.96)years old.ST deviation on 12 leads of electrocardiogram did not show significant difference before and after CSWT.Myocardial perfusion imaging showed global stress perfusion score(P=0.031)and reverse perfusion score(P=0.024).Global rest ischemia score reduced after CSWT(P=0.034).Target stress perfusion score(P=0.002),target reverse perfusion score(P=0.002),target reverse ischemic area(P=0.001)were improved after CSWT.Conclusions CSWT may not influence ST deviation of electrocardiogram,but may improve myocardial ischemia in CAD patients,