The evaluation of blood compatibility of biomaterials is crucial for ensuring the clinical safety of implantable medical devices. To address the limitations of traditional testing methods in real-time monitoring and electrical property analysis, this study developed a portable electrical impedance tomography (EIT) system. The system uses a 16-electrode design, operates within a frequency range of 1 to 500 kHz, achieves a signal to noise ratio (SNR) of 69.54 dB at 50 kHz, and has a data collection speed of 20 frames per second. Experimental results show that the EIT system developed in this study is highly consistent with a microplate reader ( R ²=0.97) in detecting the hemolytic behavior of industrial-grade titanium (TA3) and titanium alloy-titanium 6 aluminum 4 vanadium (TC4) in anticoagulated bovine blood. Additionally, with the support of a multimodal image fusion Gauss-Newton one-step iterative algorithm, the system can accurately locate and monitor in real-time the dynamic changes in blood permeation and coagulation caused by TC4 in vivo. In conclusion, the EIT system developed in this study provides a new and effective method for evaluating the blood compatibility of biomaterials.
Electric Impedance ; Animals ; Tomography/instrumentation* ; Biocompatible Materials ; Materials Testing/instrumentation* ; Cattle ; Titanium ; Alloys ; Prostheses and Implants

In maxillofacial surgery, there is a significant need for the design and fabrication of porous scaffolds with customizable bionic structures and mechanical properties suitable for bone tissue engineering. In this paper, we characterize the porous Ti6Al4V implant, which is one of the most promising and attractive biomedical applications due to the similarity of its modulus to human bones. We describe the mechanical properties of this implant, which we suggest is capable of providing important biological functions for bone tissue regeneration. We characterize a novel bionic design and fabrication process for porous implants. A design concept of "reducing dimensions and designing layer by layer" was used to construct layered slice and rod-connected mesh structure (LSRCMS) implants. Porous LSRCMS implants with different parameters and porosities were fabricated by selective laser melting (SLM). Printed samples were evaluated by microstructure characterization, specific mechanical properties were analyzed by mechanical tests, and finite element analysis was used to digitally calculate the stress characteristics of the LSRCMS under loading forces. Our results show that the samples fabricated by SLM had good structure printing quality with reasonable pore sizes. The porosity, pore size, and strut thickness of manufactured samples ranged from (60.95± 0.27)% to (81.23±0.32)%, (480±28) to (685±31) μm, and (263±28) to (265±28) μm, respectively. The compression results show that the Young's modulus and the yield strength ranged from (2.23±0.03) to (6.36±0.06) GPa and (21.36±0.42) to (122.85±3.85) MPa, respectively. We also show that the Young's modulus and yield strength of the LSRCMS samples can be predicted by the Gibson-Ashby model. Further, we prove the structural stability of our novel design by finite element analysis. Our results illustrate that our novel SLM-fabricated porous Ti6Al4V scaffolds based on an LSRCMS are a promising material for bone implants, and are potentially applicable to the field of bone defect repair.
Alloys ; Bionics ; Bone Substitutes/chemistry* ; Bone and Bones/pathology* ; Compressive Strength ; Elastic Modulus ; Finite Element Analysis ; Humans ; Lasers ; Materials Testing ; Maxillofacial Prosthesis Implantation ; Porosity ; Pressure ; Printing, Three-Dimensional ; Prostheses and Implants ; Prosthesis Design ; Stress, Mechanical ; Surgery, Oral/instrumentation* ; Tissue Engineering/methods* ; Titanium/chemistry*

Arthroscopy ; adverse effects ; instrumentation ; methods ; Diagnostic Equipment ; adverse effects ; microbiology ; Disinfection ; methods ; Equipment Failure ; Humans ; Materials Testing ; methods ; Orthopedic Equipment ; adverse effects ; microbiology ; Postoperative Complications ; etiology ; prevention & control

OBJECTIVE: To compare the effects of autoclave on surface microstructure and cyclic fatigue resistance of K3XF and K3. METHODS: Forty-eight size 25, 0.06 taper 25 mm-long K3XF or K3 were randomly divided into 4 groups (n=12). The instruments from group 1 were not autoclaved, and the groups 2 to 4 underwent autoclave for 10 cycles, 20 cycles, and 30 cycles, respectively. The surface microstructure of two instruments randomly selected from each group was observed using scanning electron microscope (SEM). The remaining 10 instruments were submitted to the cyclic fatigue test by using a simulated metal root canal with curvature of 60° and radius 3.5 mm. The time till fracture was recorded, the number of cyclic fatigue (NCF) calculated, the fragment length evaluated, and the topographic features were analyzed using SEM. The data were analyzed using the two-way ANOVA analysis by SAS 9.3 software at a significance level of P<0.05. RESULTS: SEM observation identified rough features on the surface of K3XF with micropores existing evenly. K3 was characterized by machining grooves, which located specifically in the flute, leaving a smooth cutting edge. After autoclave, SEM observation indicated that the micropores in the surface of K3XF became larger and more, whereas the machining grooves in the surface of K3 were squeezed, out of shape and flaking. As far as the NCF was concerned, new K3XF was 210±59, and no significant difference was found after 10, 20, and 30 cycles of autoclave for K3XF, values being 178±37, 208±48, and 227±43, respectively (P>0.05). For K3, the new one was 145±38, and no significant difference in NCF was demonstrated after 10 and 20 cycles of autoclave, with the values of 128±43 and 124±46, respectively (P>0.05). However, after 30 cycles of autoclave of K3, significant increase to 216±38 was identified (P<0.05). Topographic features demonstrated typical cyclic fatigue for all the groups. CONCLUSION The surface roughness of K3XF was increased after autoclave, while the cyclic resistance remained stable after up to 30 cycles.
Dental Alloys ; Dental Instruments ; Disinfection ; Equipment Failure ; Hot Temperature ; Materials Testing ; Nickel ; Root Canal Preparation/instrumentation* ; Titanium

OBJECTIVEThe objective of this study was to investigate the aspiratory resistance, filtration penetration and their influence factors of N95 filtering-facepiece respirators used widely in China.

METHODSThe total of 6 brands and 21 models of N95 filtering-facepiece respirators which are certified and big sales on the market. The aspiratory resistance and filtration efficiency filter penetration were measured while air pump ran from 10 L/min to 100 L/min using differential pressure gauge and the PortaCount, respectively.

RESULTSThe filtration penetrations for 2 of the 21 models were lower than 95%, and the qualified rate for all models was 90.47%. The filtration penetrations gradually decreased when ventilation flow of air pump increased. The negative correlation was observed between filtration penetration and ventilation flow (r(2) = 0.711, P < 0.05). The resistances of all 21 models of N95 respirators met the requirements of the national standard. The aspiratory resistance started to elevate with the increasing of ventilation flow, and a positive correlation between both (r(2) = 0.878, P < 0.05). Significant differences of filtration penetration and aspiratory resistance were observed among between different brands (P < 0.05) although no differences of filtration penetration existed among different models of one brand (P > 0.05). But the differences of the aspiratory resistance among different models of one brand were statistically significant (P < 0.05).

CONCLUSIONThe aspiratory resistances of all N95 filtering-facepiece respirators used in this study met the requirements of the national standard. And the qualified ratio of filtration penetration of all models was higher than 90%. The influencing factors of aspiratory resistance included materials, size and ventilation flow. And influencing factors for filtration penetration were materials and ventilation flow.

Air Pollutants, Occupational ; China ; Equipment Design ; Filtration ; instrumentation ; Masks ; standards ; Materials Testing ; Respiratory Protective Devices ; standards

The aim of this study was to evaluate the effect of controlled intraoral grinding and polishing on the roughness of full-contour zirconia compared to classical veneered zirconia. Thirty bar-shaped zirconia specimens were fabricated and divided into two groups (n=15). Fifteen specimens (group 1) were glazed and 15 specimens (group 2) were veneered with feldspathic ceramic and then glazed. Prior to grinding, maximum roughness depth (Rmax) values were measured using a profilometer, 5 times per specimen. Simulated clinical grinding and polishing were performed on the specimens under water coolant for 15 s and 2 N pressure. For grinding, NTI diamonds burs with grain sizes of 20 µm, 10 µm, and 7.5 µm were used sequentially. The ground surfaces were polished using NTI kits with coarse, medium and fine polishers. After each step, Rmax values were determined. Differences between groups were examined using one-way analysis of variance (ANOVA). The roughness of group 1 was significantly lower than that of group 2. The roughness increased significantly after coarse grinding in both groups. The results after glazing were similar to those obtained after fine grinding for non-veneered zirconia. However, fine-ground veneered zirconia had significantly higher roughness than venerred, glazed zirconia. No significant difference was found between fine-polished and glazed zirconia, but after the fine polishing of veneered zirconia, the roughness was significantly higher than after glazing. It can be concluded that for full-contour zirconia, fewer defects and lower roughness values resulted after grinding and polishing compared to veneered zirconia. After polishing zirconia, lower roughness values were achieved compared to glazing; more interesting was that the grinding of glazed zirconia using the NTI three-step system could deliver smooth surfaces comparable to untreated glazed zirconia surfaces.
Aluminum Silicates ; chemistry ; Ceramics ; chemistry ; Crowns ; Dental Materials ; chemistry ; Dental Polishing ; instrumentation ; methods ; Dental Prosthesis Design ; Dental Veneers ; Diamond ; chemistry ; Humans ; Materials Testing ; Microscopy, Electron, Scanning ; Particle Size ; Potassium Compounds ; chemistry ; Pressure ; Surface Properties ; Time Factors ; Water ; chemistry ; Yttrium ; chemistry ; Zirconium ; chemistry

In this study, we evaluate the influence of post surface pre-treatments on the bond strength of four different cements to glass fiber posts. Eighty extracted human maxillary central incisors and canines were endodontically treated and standardized post spaces were prepared. Four post pre-treatments were tested: (i) no pre-treatment (NS, control), (ii) sandblasting (SA), (iii) silanization (SI) and (iv) sandblasting followed by silanization (SS). Per pre-treatment, four dual-cure resin cements were used for luting posts: DMG LUXACORE Smartmix Dual, Multilink Automix, RelyX Unicem and Panavia F2.0. All the specimens were subjected to micro push-out test. Two-way analysis of variance and Tukey post hoc tests were performed (α=0.05) to analyze the data. Bond strength was significantly affected by the type of resin cement, and bond strengths of RelyX Unicem and Panavia F2.0 to the fiber posts were significantly higher than the other cement groups. Sandblasting significantly increased the bond strength of DMG group to the fiber posts.
Aluminum Oxide ; chemistry ; Composite Resins ; chemistry ; Curing Lights, Dental ; classification ; Cuspid ; pathology ; Dental Bonding ; Dental Etching ; methods ; Dental Materials ; chemistry ; Dental Stress Analysis ; instrumentation ; Glass ; chemistry ; Humans ; Incisor ; pathology ; Materials Testing ; Microscopy, Electron, Scanning ; Polymerization ; Post and Core Technique ; instrumentation ; Resin Cements ; chemistry ; Root Canal Preparation ; methods ; Self-Curing of Dental Resins ; methods ; Silanes ; chemistry ; Stress, Mechanical ; Surface Properties ; Tooth, Nonvital ; therapy

This study evaluated the adhesion of zirconia core ceramics with their corresponding veneering ceramics, having different thermal expansion coefficients (TECs), when zirconia ceramics were coloured at green stage. Zirconia blocks (N=240; 6 mm×7 mm×7 mm) were manufactured from two materials namely, ICE Zirconia (Group 1) and Prettau Zirconia (Group 2). In their green stage, they were randomly divided into two groups. Half of the specimens were coloured with colouring liquid (shade A2). Three different veneering ceramics with different TEC (ICE Ceramic, GC Initial Zr and IPS e.max Ceram) were fired on both coloured and non-coloured zirconia cores. Specimens of high noble alloys (Esteticor Plus) veneered with ceramic (VM 13) (n=16) acted as the control group. Core-veneer interface of the specimens were subjected to shear force in the Universal Testing Machine (0.5 mm⋅min(-1)). Neither the zirconia core material (P=0.318) nor colouring (P=0.188) significantly affected the results (three-way analysis of variance, Tukey's test). But the results were significantly affected by the veneering ceramic (P=0.000). Control group exhibited significantly higher mean bond strength values (45.7±8) MPa than all other tested groups ((27.1±4.1)-(39.7±4.7) and (27.4±5.6)-(35.9±4.7) MPa with and without colouring, respectively) (P<0.001). While in zirconia-veneer test groups, predominantly mixed type of failures were observed with the veneering ceramic covering <1/3 of the substrate surface, in the metal-ceramic group, veneering ceramic was left adhered >1/3 of the metal surface. Colouring zirconia did not impair adhesion of veneering ceramic, but veneering ceramic had a significant influence on the core-veneer adhesion. Metal-ceramic adhesion was more reliable than all zirconia-veneer ceramics tested.
Adhesiveness ; Ceramics ; chemistry ; Color ; Dental Bonding ; Dental Materials ; chemistry ; Dental Porcelain ; chemistry ; Dental Stress Analysis ; instrumentation ; Dental Veneers ; Gold Alloys ; chemistry ; Humans ; Materials Testing ; Metal Ceramic Alloys ; chemistry ; Prosthesis Coloring ; Stress, Mechanical ; Surface Properties ; Thermodynamics ; Yttrium ; chemistry ; Zirconium ; chemistry

OBJECTIVETo investigate necessity of the further processing for adsorptive resin material.

METHODSAccording to GB/ T 16886.4, coagulation tests, haematology tests, in vitro spontaneous platelet-adhesion test and complement activation tests were conducted respectively to assess the in vitro blood compatibility of adsorptive resin material.

RESULTSIn comparison with polypropylene, he adsorptive resin material appears to be a very slight activator to the endogenous blood coagulation system, it can inhibited the exogenous blood coagulation system very significantly (P < 0.01), it can adhere to fibrinogen, red blood cells, reticulocytes very significantly (P < 0.01), and platelet significantly (P < 0.05). The adsorptive resin material is also revealed to be a very significant activator (P < 0.01) to the complement system.

CONCLUSIONSThe in vitro blood compatibility assessment witnesses that it is very necessary for the adsorptive resin material to go through the certain special processing(such as the surface modification and the microencapsulation technology, etc) before its application to human being.

Biocompatible Materials ; Hemoperfusion ; instrumentation ; Humans ; Materials Testing ; Resins, Synthetic

To investigate whether masticatory fatigue affects the fracture resistance and pattern of lower premolars restored with quartz-fiber post-core and full crown, 44 single rooted lower premolars recently extracted from orthodontic patients were divided into two groups of 22 each. The crowns of all teeth were removed and endodontically treated and then restored with quartz-fiber post-core and full crown. Twenty-two teeth in one group were selected randomly and circularly loaded at 45° to the long axis of the teeth of 127.4 N at a 6 Hz frequency, and the other group was not delivered to cyclic loading and considered as control. Subsequently, all teeth in two groups were continually loaded to fail at 45° to the long axis of the teeth at a crosshead speed of 1 mm⋅min(-1). The mean destructive force values were (733.88±254.99) and (869.14±280.26) N for the experimental and the control group, respectively, and no statistically significant differences were found between two groups (P>0.05). Bevel fracture and horizontal fracture in the neck of root were the major fracture mode of the specimens. Under the circumstances of this study, it seems that cyclic loading does not affect the fracture strength and pattern of the quartz-fiber post-core-crown complex.
Acid Etching, Dental ; methods ; Adult ; Bicuspid ; Bite Force ; Chromium Alloys ; chemistry ; Crowns ; Dental Prosthesis Design ; Dental Restoration Failure ; Dental Stress Analysis ; instrumentation ; Humans ; Materials Testing ; Methacrylates ; chemistry ; Phosphoric Acids ; chemistry ; Post and Core Technique ; instrumentation ; Quartz ; chemistry ; Resin Cements ; chemistry ; Stress, Mechanical ; Tooth Fractures ; physiopathology ; Tooth Root ; injuries ; Tooth, Nonvital ; rehabilitation