Objective To analyze the factors influencing occupational health literacy (OHL), work-related musculoskeletal disorders (WMSDs), and occupational stress in medical staff, and to investigate the potential associations between OHL and WMSDs as well as occupational stress. Methods A total of 880 medical staff members from 18 medical institutions were selected as the study subjects using a probability proportional method. Data on OHL, WMSDs, and occupational stress were investigated using the National Key Populations Occupational Health Literacy Surveillance Individual Questionnaire (including the Musculoskeletal Disorders Questionnaire and the Core Occupational Stress Scale), and the influencing factors and potential relationships were analyzed. Results The OHL level was 63.1%, the prevalence of WMSDs was 88.1%, and the detection rate of occupational stress was 24.0% in the study subjects. Multivariable logistic regression analysis showed that female medical staff had lower OHL levels than males (P<0.05). Medical staff with higher education levels and those working in higher-level medical institutions had higher OHL levels (all P<0.05). Medical staff working >40-<49 hours per week and those working ≥49 hours per week had higher OHL levels than those working ≤40 hours per week (all P<0.01). Medical staff with higher education levels or longer working hours had a higher risk of WMSDs (all P<0.05). Medical staff with lower monthly personal income, longer weekly working hours, and lower OHL levels had a higher risk of occupational stress (all P<0.05), and those working night shifts had a higher risk of occupational stress than those who did not (P<0.01). Conclusion The study participants had a relatively high level of OHL, a high prevalence of WMSDs, and a low detection rate of occupational stress. It is recommended that medical institutions effectively implement occupational health promotion and support measures to improve the OHL level of medical staff, to reduce the risk of WMSDs and occupational stress.

ObjectiveTo enhance the genetic diagnostic yield for fetal short femur length （FL） and to evaluate the integration of whole exome sequencing （WES） with chromosomal abnormality detection in prenatal diagnosis. MethodsA total of 27 mid-to-late trimester fetuses diagnosed with short FL ［FL < 5th percentile for gestational age or < -2 SD （Standard Deviation）］ at the Prenatal Diagnosis And Medical Genetics Center，Shenshan Medical Center，Memorial Hospital of Sun Yat-Sen University between November 2023 and May 2025 were included. Amniotic fluid or umbilical cord blood samples were collected and subjected to chromosomal karyotyping （19cases）， chromosomal microarray analysis （CMA） or low-coverage whole genome copy number variation（CNV-Seq） （27 cases）， and trio-based whole exome sequencing （trio-WES） （27 cases）. The pathogenicity of genetic variants were interpreted according to the American College of Medical Genetics and Genomics （ACMG） guidelines. ResultsTwenty-six genomic variants were detected in 17 of the 26 fetuses， including numerical chromosomal abnormalities （mosaic type）， copy number variations （CNVs）， single nucleotide variants （SNVs） and insertions-deletions （INDELs）. Genomic variants detected in 11 cases could explain the short femur phenotype.The overall diagnostic rate was 11/27， with pathogenic/likely pathogenic variants explaining 9 cases and variants of uncertain significance （VUS） accounting for 1 cases. In addition Chromosomal karyotype analysis revealed chromosome mosaicism explaining 1 case. The diagnostic rate of CNV detection （CMA/CNV-seq） was 2/27， while WES achieved a diagnostic rate of 10/27， with an incremental yield of 8/27 in cases with negative or inconclusive CNV results. Pathogenic mutations involved genes such as FGFR3， SHOX， DUOX2， CLCN5， and HBA1/HBA2. ConclusionTrio-WES significantly improves the genetic diagnostic rate for fetal short femur length， particularly in cases where chromosomal analysis fails to identify a cause. Karyotyping remains valuable for detecting low-level mosaicism in large-scale chromosomal abnormalities， thereby complementing WES and CNV detection. A stepwise or parallel genetic testing strategy is recommended in prenatal diagnosis to optimize diagnostic efficiency and support clinical decision-making.

Objective To explore the association between long working hours, anxiety symptoms, and insomnia symptoms among footwear industry workers, and to examine the mediating effect of anxiety symptoms between long working hours and insomnia symptoms. Methods A total of 710 workers from 15 footwear manufacturing enterprises in Guangdong Province were selected as study subjects using a stratified random sampling method. Long working hours, anxiety symptoms, and insomnia symptoms among the workers were assessed using the National Key Population Occupational Health Literacy Monitoring Questionnaire, the Chinese version of the Generalized Anxiety Disorder Self-Rating Scale, and the Self-Rating Sleep Questionnaire. Binary logistic regression was applied to analyze the associations of long working hours and anxiety symptoms with insomnia symptoms, and a mediation effect model was used to examine the mediating role of anxiety symptoms. Results The workers with long working hours accounted for 69.6% of participants. The detection rates of anxiety symptoms and insomnia symptoms were 17.0% and 20.7% in these workers, respectively. Binary logistic regression analysis showed that both long working hours and anxiety symptoms were influencing factors for insomnia symptoms (both P<0.01). Mediation analysis indicated that long working hours had a direct effect on insomnia symptoms, accounting for 67.9% of the total effect. Anxietysymptoms played a partial mediating role between long working hours and insomnia symptoms, with an effect value of 0.18 (95% confidence interval 0.07-0.30, P<0.01), accounting for 32.1% of the total effect. Conclusion Both long working hours and anxiety symptoms are influencing factors for insomnia symptoms among the footwear industry workers, and anxiety symptoms partially mediate the impact of long working hours on insomnia symptoms.

Objective To analyze the current status of occupational health literacy (OHL) among front-line workers in the metal products industry and to explore its influencing factors. Methods A total of 5 193 front-line workers from the metal products industry in 14 prefecture-level cities in Guangdong Province were selected as the research subjects by the stratified cluster random sampling method. The Occupational Health Literacy Questionnaire of National Key Populations was used to assess their OHL levels. To analyze the influencing factors of OHL, binary logistic regression analysis was conducted. Results The overall OHL level among the participants was 40.0% (2 079/5 193). The result of binary logistic regression analysis showed that workers with lower educational level, lower average monthly personal income, and smaller enterprise size had lower OHL levels (all P<0.01). In addition, workers in foreign-funded enterprises had higher OHL levels than those in private enterprises (P<0.01). Conclusion There remains considerable room for improvement in OHL among front-line workers in the metal products industry. Priority focus is to improve OHL among workers with lower education and income levels, as well as those employed in private and micro- or small-sized enterprises.

Objective:To investigate the level of occupational health literacy (OHL) among workers in the electronic manufacturing industry, analyze the influencing factors, and provide a scientific basis for occupational health promotion work.Methods:From July to September 2022, a stratified cluster random sampling method was adopted, and 870 workers from 20 large, medium, small and micro electronic manufacturing enterprises in Guangdong Province were selected as the research subjects. The OHL level of workers was investigated by using the "Personal Questionnaire for Monitoring and Surveying Occupational Health Literacy of National Key Populations", and the influencing factors were analyzed by binary logistic regression.Results:The OHL level of workers in electronic manufacturing industry was 36.09% (314/870). The OHL levels in the four dimensions of occupational health legal knowledge, basic knowledge of occupational health protection, healthy work methods and behaviors, and basic skills of occupational health protection were 39.08% (340/870), 78.97% (687/870), 56.55% (492/870), and 22.41% (195/870), respectively. logistic regression analysis showed that junior high school, senior high school/vocational high school/technical secondary school education, and average monthly income of 5000-6999 yuan and ≥7000 yuan were protective factors for high OHL levels among workers ( P<0.05) . Conclusion:The OHL level of workers in the electronic manufacturing industry is relatively low, and the promotion and intervention of OHL should be actively carried out to effectively improve the health literacy level of workers, focusing on workers with low education and low income.

Objective:To investigate the level of occupational health literacy (OHL) among workers in the electronic manufacturing industry, analyze the influencing factors, and provide a scientific basis for occupational health promotion work.Methods:From July to September 2022, a stratified cluster random sampling method was adopted, and 870 workers from 20 large, medium, small and micro electronic manufacturing enterprises in Guangdong Province were selected as the research subjects. The OHL level of workers was investigated by using the "Personal Questionnaire for Monitoring and Surveying Occupational Health Literacy of National Key Populations", and the influencing factors were analyzed by binary logistic regression.Results:The OHL level of workers in electronic manufacturing industry was 36.09% (314/870). The OHL levels in the four dimensions of occupational health legal knowledge, basic knowledge of occupational health protection, healthy work methods and behaviors, and basic skills of occupational health protection were 39.08% (340/870), 78.97% (687/870), 56.55% (492/870), and 22.41% (195/870), respectively. logistic regression analysis showed that junior high school, senior high school/vocational high school/technical secondary school education, and average monthly income of 5000-6999 yuan and ≥7000 yuan were protective factors for high OHL levels among workers ( P<0.05) . Conclusion:The OHL level of workers in the electronic manufacturing industry is relatively low, and the promotion and intervention of OHL should be actively carried out to effectively improve the health literacy level of workers, focusing on workers with low education and low income.

ObjectiveTo explore the effect of occupational stress on work-related musculoskeletal disorders (WMSDs) in electronics manufacturing workers. Methods A total of 392 front-line workers in two electronic manufacturing enterprises in Guangdong Province were selected as the research subjects using the judgment sampling method. The prevalence of WMSDs and the level of occupational stress of the research subjects were investigated using the Musculoskeletal Disorders Questionnaire and the Core Occupational Stress Scale. Results The total WMSDs detection rate was 39.5%, and the multi-site WMSDs detection rate was 30.6%. The detection rate of occupational stress was 14.8%. The total WMSDs detection rate and multi-site WMSDs detection rate in the occupational stress group were higher than those in the non-occupational stress group (65.5% vs 35.0%, 56.9% vs 26.0%, both P<0.01). Binary logistic regression analysis result showed that the risk of WMSDs in the occupational stress group was higher than that in the non-occupational stress group after adjusting the effect of confounding factors such as age, gender, job type and work days per week (P<0.01). Conclusion The occupational stress may increase the risk of WMSDs in electronics manufacturing workers. Reducing the level of occupational stress among workers in electronic manufacturing enterprises is beneficial for reducing the risk of WMSDs.

Objective:To investigate the value of fetal heart quantification (fetal HQ) in assessing ventricular function of fetuses with small-for-gestational-age (SGA) and fetal growth restriction (FGR).Methods:A total of 152 singleton pregnancies with estimated fetal weight (EFW) or abdominal circumference less than the 10th percentile in the Third Affiliated Hospital of Zhengzhou University were prospectively selected from August 2022 to September 2023, where fetal EFW or abdominal circumference were in the 3rd to 9th percentile with normal Doppler findings were classified as the SGA group ( n=79), and the rest as the FGR group ( n=73). In the same period, 161 cases of normal single fetuses were matched as the control group.Based on the gestational week in which FGR occurred, the FGR group were categorized into the early-onset group (<32 weeks, n=46) and the late-onset group (≥32 weeks, n=27), and fetuses in the FGR group with absent end-diastolic velocity of the umbilical artery were defined as severe FGR ( n=11), and the rest as mild FGR ( n=62). Fetal ventricular fractional area change (FAC), global longitudinal strain (GLS), longitudinal fractional shortening (LFS) and 24-segment fractional shortening (FS) were obtained by fetal HQ. The cardiac systolic function between groups were compared, the correlations between each parameter and gestational week were analyzed, the inter-observer and intra-observer repeatability tests were performed. Results:Compared with the control group, ventricular FAC, LFS, and GLS were lower in the SGA and the FGR group, right ventricular FS of segments 9-24 were reduced in the SGA group, and left ventricular FS of segments 10-19, 21-24 and right ventricular FS of segments 18-24 were reduced in the FGR group, the differences were statistically significant (all P<0.05). Left ventricular GLS, LFS and right ventricular FAC, GLS, LFS, FS of segments 1-14 were lower in the severe FGR group than in the mild FGR group, the differences were statistically significant (all P<0.05). The values of left ventricular GLS and LFS were higher in the early-onset FGR group than in the late-onset FGR group, the differences were statistically significant (all P<0.05). The ROC showed that the ventricular systolic function parameters predicted adverse perinatal outcomes with an AUC>0.6 (all P<0.05). Left ventricular GLS and right ventricular partial-segments FS were no correlations with gestational week in the FGR group (-0.3< rs<0.3, all P<0.05). There was no correlation between the parameters and gestational week in the SGA group (all P>0.05). The inter-observer and intra-observer intraclass correlation coefficients (ICC) were >0.75, with good reproducibility. Conclusions:Fetal HQ can quantitatively assess the changes of ventricular function in SGA and FGR fetuses, and the ventricular overall, longitudinal and localized contractile function in SGA and FGR fetuses are reduced, and abnormal ventricular systolic function is associated with adverse perinatal outcomes.

{L-End}Objective To establish the norm of Core Occupational Stress Scale (COSS) for electronic manufacturing industry workers in China. {L-End}Methods A total of 3 049 workers from five electronic manufacturing enterprises in four prefecture-level cities concentrated distribution of the electronics manufacturing industry in China were selected as research subjects using a stratified sampling method. COSS was used to investigate occupational stress levels, and the mean norm, percentile norm and threshold norms were established. {L-End}Results The average score of COSS for the electronic manufacturing industry workers in China was (43.5±7.4) points, and the average scores of social support, organization and reward, demand and effort, and autonomy dimensions were (9.5±3.1), (15.1±3.9), (13.1±3.0), and (5.7±2.0) points, respectively. A total score of 0.0-<47.0 points was determined as no occupational stress, 47.0-<51.0 points as mild occupational stress, 51.0-≤54.0 points as moderate occupational stress, and >54.0 points as severe occupational stress. {L-End}Conclusion The norm of COSS for workers in China's electronics manufacturing industry has been established, which can provide a reference for the evaluation and intervention of their occupational stress levels.

Objective To analyze result of the external quality assessment for laboratories of toxicological pathology diagnosis in organizations in China. Methods A total of 86 organizations that participated in the 2020-2021 external quality assessment in laboratory of toxicological pathology diagnosis (hereinafter referred to as "reference units") were selected as research subjects using convenient sampling method, and the assessment results were analyzed. Results The median of total score was 92, and the 0-100 percentiles were 64-100 in these 86 reference units. Among these reference units, 76 were rated as excellent, 10 as qualified, with the excellent and the qualified rate of 88.4% and 11.6%, respectively. No reference unit was rated as unqualified. The rates of excellence of the reference units in public health institutions, pharmaceutical research institutions, drug safety evaluation centers and testing companies were 95.7%, 84.2%, 85.7% and 86.7%, and the qualified rates were 4.3%, 15.8%, 14.3% and 13.3%, respectively. The distribution of excellence and qualification among the four types of reference units showed no statistical difference (P>0.05). The distribution of sample scores according to the three grades of poor, good, and excellent were 4.9%, 20.7%, and 74.5% in public health institutions, 8.6%, 23.7%, and 67.8% in pharmaceutical research institutions, 12.5%, 25.0%, and 62.5% in drug safety evaluation centers, and 5.4%, 17.5%, and 77.1% in testing companies. The proportion of excellence unit in public health institutions was higher than that in pharmaceutical research institutions (P<0.05). Conclusion The overall toxicological pathology diagnostic capabilities in China are good, and various types of reference units demonstrate comparable technical capabilities. However, there is a need for standardization of diagnostic terminology.