OBJECTIVES: This study investigate the clinical and imaging features of Ewing sarcoma (ES) of the jaw. METHODS: Eight cases of pathologically diagnosed ES of the jaw from January 2010 to June 2022 were included in the study. Clinical and radiological features were retrospectively analyzed. RESULTS: Among the eight cases, the mean age at onset was 29.4 years, and the male to female ratio was 7∶1. The predilecting site was the posterior part of mandible, accounting for 75% of the cases. The lesions often exhibited early numbness of the lower lip and lymphadenopathy. The main radiographic manifestation of mandibular lesions was ill-defined radiolucency, mixed with fibrous or brush-like tumor matrix, and soft tissue mass. The maxillary ES lesions mainly presented as lytic bone destruction accompanied by adjacent soft tissue mass. Periosteal ossification was rarely seen. CONCLUSIONS The clinical and imaging characteristics of ES in the jaw are helpful for its diagnosis.
Male ; Humans ; Female ; Sarcoma, Ewing/pathology* ; Retrospective Studies ; Radiography ; Mandible/pathology* ; Lip ; Bone Neoplasms

OBJECTIVES: This study aimed to establish a new treatment of the mandibular second molars with external root resorption caused by impacted teeth to preserve the affected teeth and their vital pulps. METHODS: For mandibular second molars clinically diagnosed as external root resorption caused by impacted teeth, debridement and removal of the root at the resorption site via micro-apical surgery and direct capping of the pulp with bioactive material on the surface of the root amputation via vital pulp therapy were performed immediately after the impacted teeth were extracted. RESULTS: The external root resorption of the affected tooth was ceased. It was asymptomatic with intact crown, normal pulp, periapical alveolar bone reconstruction, normal periodontal ligament, continuous bone sclerosis, and no periapical translucency in radiographic examination at the 1-year postoperative follow-up, thus showing good prognosis. CONCLUSIONS Simultaneous combination of micro-apical surgery and vital pulp therapy after extraction of impacted teeth could successfully preserve mandibular second molars with ERR caused by impacted teeth and their vital pulps.
Humans ; Tooth, Impacted/surgery* ; Molar ; Mandible ; Dental Pulp ; Root Canal Therapy ; Root Resorption/etiology* ; Tooth Extraction

OBJECTIVES: The aim of this study was to compare the anterior and posterior occlusal plane characteristics of patients with different temporomandibular joint osseous statuses. METHODS: A total of 306 patients with initial cone beam CT (CBCT) and cephalograms were included. They were divided into three groups on the basis of their temporomandibular joint osseous status: bilateral normal (BN) group, indeterminate for osteoarthrosis (I) group, and osteoarthrosis (OA) group. The anterior and posterior occlusal planes (AOP and POP) of the different groups were compared. Then, the regression equation was established after adjusting for confounding factors, and a correlation analysis between the occlusion planes and other parameters was performed. RESULTS: SNA, SNB, FMA, SN-MP, Ar-Go, and S-Go were correlated with the occlusal planes. Relative to the BN and I groups, the FH-OP of the OA group increased by 1.67° on the average, FH-POP increased by 1.42° on the average, and FH-AOP increased by 2.05° on the average. CONCLUSIONS The occlusal planes were steeper in the patients with temporomandibular osteoarthrosis than in the patients without it, and the mandible rotated downward and backward. The height of the mandibular ramus, the mandibular body length, and the posterior face height were small. In clinical practice, attention should be given to the potential risk of temporomandibular joint osteoarthrosis in such patients. In addition, SNB, FMA, SN-MP, Ar-Go, S-Go, and occlusal planes had moderate correlations.
Humans ; Dental Occlusion ; Cephalometry ; Mandible ; Temporomandibular Joint Disorders/diagnostic imaging* ; Temporomandibular Joint/diagnostic imaging* ; Osteoarthritis/diagnostic imaging* ; Mandibular Condyle

OBJECTIVES: This study aimed to conduct a meta-analysis of the efficacy of mandibular advance clear alig-ners with traditional functional appliances as the control group. METHODS: PubMed, Web of Science, Embase, Cochrane Library, China Biomedical Abstracts Database, China Knowledge Network Database, Wanfang Database, and Weipu Database were used in this study. The two groups of researchers screened the literature and extracted data based on the inclusion and exclusion criteria established by PICOS entries, and used the ROBINS-I scale for quality evaluation. Revman 5.4 and Stata 17.0 software were used for meta-analysis. RESULTS: Nine clinical controlled trials were included in this study with a total sample size of 283 cases. No significant difference was found in SNA, SNB, ANB, Go-Pog, U1-SN, Overjet, and other aspects between the invisible group and the traditional group in the treatment of skeletal class Ⅱ ma-locclusion patients; there was a 0.90° difference in mandibular plane angle between the two groups; the growth of the mandibular ramus (Co-Go) in the traditional group was 1.10 mm more than that in the invisible group; the lip inclination of the lower teeth in the invisible group was better controlled, 1.94° less than that in the control group. CONCLUSIONS The invisible group can better control the lip inclination of the mandibular anterior teeth when guiding the mandible. Furthermore, the mandibular plane angle (MP-SN) can remain unchanged, but the growth of the mandibular ramus is not as good as the traditional group, and auxiliary measures should be taken to improve it in clinical practice.
Humans ; Malocclusion, Angle Class II/therapy* ; Mandibular Advancement ; Orthodontics, Corrective ; Orthodontic Appliances, Functional ; Mandible ; Orthodontic Appliances, Removable ; Cephalometry

Occlusal plane (OP) is one of the essential factors affecting craniofacial morphology and function. The OP not only assists in diagnosing malocclusion but also serves as an important reference for making treatment plans. Patients with different types of malocclusions have different forms of OP. Compared with patients with standard skeletal facial type, the occlusal plane of patients with skeletal class Ⅱ and high angle is steeper, while that of patients with skeletal class Ⅲ and low angle is more even. In orthodontic treatment, adjusting and controlling the OP can promote the normal growth and development of the mandible in most patients with malocclusion during the early stage of growth, while causing favorable rotation of the mandible in some adults with mild-to-moderate malocclusion. For moderate-to-severe malocclusion, the OP rotation by orthodontic-orthognathic treatment can achieve better long-term stability. This article reviews the evolution of the definition of OP and its implications for diagnosing and the guiding treatment of malocclusion.
Adult ; Humans ; Dental Occlusion ; Maxilla ; Cephalometry ; Malocclusion/therapy* ; Mandible

Chewing-side preference is one of the risk factors for temporomandibular disorders (TMD), and people with chewing-side preference is more prone to have short and displaced condyles, increased articular eminence inclination and glenoid fossa depth. The proportion of TMD patients with chewing-side preference is often higher than that of the normal subjects. Clinical studies have shown a strong correlation between chewing-side preference and TMD symptoms and signs; and animal studies have shown that chewing-side preference can affect the growth, development, damage and repair of the mandible. After long-term unilateral mastication, changes in the stress within the joint cause the imbalance of temporomandibular joint (TMJ) structural reconstruction, the transformation and even destruction of the fiber structure of masticatory muscle, resulting in uncoordinated movement of bilateral muscles. The joint neurogenic diseases caused by the increase of neuropeptide substance P and calcitonin-gene-related-peptide (CGRP) released locally by TMJ may be the mechanism of TMD. This article reviews the research progress of the influence of chewing-side preference on the structure of TMJ, the relationship between chewing-side preference and TMD, and the related mechanisms.
Humans ; Mastication/physiology* ; Temporomandibular Joint/physiology* ; Temporomandibular Joint Disorders/etiology* ; Mandible/physiology*

Objective: To establish a comprehensive diagnostic classification model of lateral cephalograms based on artificial intelligence (AI) to provide reference for orthodontic diagnosis. Methods: A total of 2 894 lateral cephalograms were collected in Department of Orthodontics, Capital Medical University School of Stomatology from January 2015 to December 2021 to construct a data set, including 1 351 males and 1 543 females with a mean age of (26.4± 7.4) years. Firstly, 2 orthodontists (with 5 and 8 years of orthodontic experience, respectively) performed manual annotation and calculated measurement for primary classification, and then 2 senior orthodontists (with more than 20 years of orthodontic experience) verified the 8 diagnostic classifications including skeletal and dental indices. The data were randomly divided into training, validation, and test sets in the ratio of 7∶2∶1. The open source DenseNet121 was used to construct the model. The performance of the model was evaluated by classification accuracy, precision rate, sensitivity, specificity and area under the curve (AUC). Visualization of model regions of interest through class activation heatmaps. Results: The automatic classification model of lateral cephalograms was successfully established. It took 0.012 s on average to make 8 diagnoses on a lateral cephalogram. The accuracy of 5 classifications was 80%-90%, including sagittal and vertical skeletal facial pattern, mandibular growth, inclination of upper incisors, and protrusion of lower incisors. The acuracy rate of 3 classifications was 70%-80%, including maxillary growth, inclination of lower incisors and protrusion of upper incisors. The average AUC of each classification was ≥0.90. The class activation heat map of successfully classified lateral cephalograms showed that the AI model activation regions were distributed in the relevant structural regions. Conclusions: In this study, an automatic classification model for lateral cephalograms was established based on the DenseNet121 to achieve rapid classification of eight commonly used clinical diagnostic items.
Male ; Female ; Humans ; Young Adult ; Adult ; Artificial Intelligence ; Deep Learning ; Cephalometry ; Maxilla ; Mandible/diagnostic imaging*

OBJECTIVE: To evaluate the decompensation effectiveness and alveolar bone remodeling of mandibular anterior teeth after preoperative orthodontic treatment in high-angle patients with skeletal class Ⅱ malocclusion using lateral cephalogram and cone-beam computed tomography (CBCT). METHODS: Thirty high-angle patients with skeletal class Ⅱ malocclusion who had received preoperative orthodontic treatment and orthognathic surgery in Peking University School and Hospital of Stomatology between Ja-nuary 2017 and August 2022 and had taken lateral cephalogram and CBCT before and after preoperative orthodontic treatment were selected. Items were measured with lateral cephalogram including: The lower central incisor (L1)-Frankfort plane angle (L1-FH), the L1-mandibular plane angle (L1-MP), the L1-nasion-supramental angle (L1-NB) and the vertical distance from the incisal edge of lower central incisor to NB line (L1-NB distance), etc. The incidence of dehiscence/fenestration and the length of dehiscence at labial side (d-La) and lingual side (d-Li) were measured using CBCT. Pearson correlation analysis was used to evaluate the correlation between the changes of d-Li of L1 and age, duration of preoperative orthodontic treatment and the cephalometric measurements before preoperative orthodontic treatment to screen out risk factors affecting the periodontal risk of preoperative orthodontic treatment in high-angle patients with skeletal class Ⅱ malocclusions. RESULTS: After preoperative orthodontic treatment, L1-FH, L1-MP, L1-NB and L1-NB distances changed by 11.56°±5.62°, -11.13°±5.53°, -11.57°±5.43° and (-4.99±1.89) mm, respectively, and the differences were all statistically significant (P < 0.05). Among the 180 measured mandibular anterior teeth, 45 cases with labial dehiscence/fenestration before preoperative orthodontic treatment (T0) had no longer labial dehiscence/fenestration after preope-rative orthodontic treatment (T1); 142 cases without lingual dehiscence/fenestration at T0 had lingual dehiscence/fenestration at T1. After preoperative orthodontic treatment, the d-La of lower lateral incisors (L2), lower canines (L3) and lower anterior teeth (L1+L2+L3) decreased by (0.95±2.22) mm, (1.20±3.23) mm and (0.68±2.50) mm, respectively, and the differences were statistically significant (P < 0.05); the d-Li of L1, L2, L3 and L1+L2+L3 increased by (4.43±1.94) mm, (4.53±2.35) mm, (3.19±2.80) mm and (4.05±2.46) mm, respectively, and the differences were statistically significant (P < 0.05). The increase of d-Li of L1 was positively correlated with L1-FH (r=0.373, P=0.042). CONCLUSION This study showed that high-angle patients with skeletal class Ⅱ ma-locclusion could achieve ideal decompensation effect of mandibular anterior teeth after preoperative orthodontic treatment with bilateral mandibular first premolars extracted, but the lingual periodontal risk of mandibular anterior teeth was increased. This risk could be correlated to L1-FH before preoperative orthodontic treatment, which should be paid more attention in the design of orthodontic-orthognathic surgical treatment.
Humans ; Malocclusion, Angle Class III ; Malocclusion, Angle Class II/surgery* ; Facial Bones ; Incisor ; Orthognathic Surgical Procedures ; Cone-Beam Computed Tomography ; Mandible

OBJECTIVE: To explore an efficient and automatic method for determining the anatomical landmarks of three-dimensional(3D) mandibular data, and to preliminarily evaluate the performance of the method. METHODS: The CT data of 40 patients with normal craniofacial morphology were collected (among them, 30 cases were used to establish the 3D mandibular average model, and 10 cases were used as test datasets to validate the performance of this method in determining the mandibular landmarks), and the 3D mandibular data were reconstructed in Mimics software. Among the 40 cases of mandibular data after the 3D reconstruction, 30 cases that were more similar to the mean value of Chinese mandibular features were selected, and the size of the mandibular data of 30 cases was normalized based on the Procrustes analysis algorithm in MATLAB software. Then, in the Geomagic Wrap software, the 3D mandibular average shape model of the above 30 mandibular data was constructed. Through symmetry processing, curvature sampling, index marking and other processing procedures, a 3D mandible structured template with 18 996 semi-landmarks and 19 indexed mandibular anatomical landmarks were constructed. The open source non-rigid registration algorithm program Meshmonk was used to match the 3D mandible template constructed above with the tested patient's 3D mandible data through non-rigid deformation, and 19 anatomical landmark positions of the patient's 3D mandible data were obtained. The accuracy of the research method was evaluated by comparing the distance error of the landmarks manually marked by stomatological experts with the landmarks marked by the method of this research. RESULTS: The method of this study was applied to the data of 10 patients with normal mandibular morphology. The average distance error of 19 landmarks was 1.42 mm, of which the minimum errors were the apex of the coracoid process [right: (1.01±0.44) mm; left: (0.56±0.14) mm] and maximum errors were the anterior edge of the lowest point of anterior ramus [right: (2.52±0.95) mm; left: (2.57±1.10) mm], the average distance error of the midline landmarks was (1.15±0.60) mm, and the average distance error of the bilateral landmarks was (1.51±0.67) mm. CONCLUSION The automatic determination method of 3D mandibular anatomical landmarks based on 3D mandibular average shape model and non-rigid registration algorithm established in this study can effectively improve the efficiency of automatic labeling of 3D mandibular data features. The automatic determination of anatomical landmarks can basically meet the needs of oral clinical applications, and the labeling effect of deformed mandible data needs to be further tested.
Humans ; Imaging, Three-Dimensional/methods* ; Mandible/diagnostic imaging* ; Software ; Algorithms ; Anatomic Landmarks/anatomy & histology*

The mandibular metastatic spread of carcinoma from the thyroid gland is exceedingly rare. Follicular thyroid carcinoma is the second most common type of thyroid carcinoma，accounting for approximately 10% to 15% of all thyroid cancers. The prognosis of FTC is relatively satisfactory. Due to its rich blood transport, it is easy to metastasize hematological, with the main sites of metastasis are bone and lung. However，mandibular metastasis of thyroid follicular carcinoma is rare. We report a case of thyroid follicular carcinoma that metastasized to the ascending ramus of the mandible 21 years after surgery.The operation was successfully completed, and there was no recurrence during postoperative follow-up. Due to the absence of obvious clinical symptoms in the patient, the diagnosis and treatment were challenging. We have provided detailed radiographic and pathological images to facilitate understanding and discussion of the disease.
Humans ; Adenocarcinoma, Follicular/pathology* ; Thyroid Neoplasms/surgery* ; Prognosis ; Mandible