Vertebral refracture following percutaneous vertebral augmentation (PVA) is commonly seen in elderly patients with osteoporotic thoracolumbar compression fractures (OTLCF). It can lead to recurrent pain, loss of vertebral height, progression of kyphosis, and even neurological dysfunction, significantly impairing patients′ quality of life. Current diagnosis and treatment face multiple challenges, including high misdiagnosis rate, difficulty in choosing between surgical and non-surgical treatment options, lack of standardized surgical protocols, interference from intralesional bone cement during procedures, inadequate stability of internal fixation in osteoporotic bone, and suboptimal compliance of anti-osteoporotic therapy. Establishing a standardized diagnostic and therapeutic framework is urgently needed. To standardize the management process and improve outcomes for vertebral refractures after PVA in elderly OTLCF patients, Spinal Trauma Group of the Orthopedic Branch of Chinese Medical Doctor Association organized experts in the field to develop Guideline for the diagnosis and treatment of vertebral refracture after percutaneous vertebral augmentation in elderly patients with osteoporotic thoracolumbar compression fractures ( version 2025), based on current literature and clinical experience, and adhering to principles of scientific rigor and clinical applicability. A total of 11 recommendations were proposed, encompassing diagnosis, treatment, and rehabilitation of vertebral refracture after PVA in elderly patients with OTLCF, aiming to provide a foundation for a standardized management.

OBJECTIVE: We aimed to investigate the patterns of fasting blood glucose (FBG) trajectories and analyze the relationship between various occupational hazard factors and FBG trajectories in male steelworkers. METHODS: The study cohort included 3,728 workers who met the selection criteria for the Tanggang Occupational Cohort (TGOC) between 2017 and 2022. A group-based trajectory model was used to identify the FBG trajectories. Environmental risk scores (ERS) were constructed using regression coefficients from the occupational hazard model as weights. Univariate and multivariate logistic regression analyses were performed to explore the effects of occupational hazard factors using the ERS on FBG trajectories. RESULTS: FBG trajectories were categorized into three groups. An association was observed between high temperature, noise exposure, and FBG trajectory ( P < 0.05). Using the first quartile group of ERS1 as a reference, the fourth quartile group of ERS1 had an increased risk of medium and high FBG by 1.90 and 2.21 times, respectively (odds ratio [ OR] = 1.90, 95% confidence interval [ CI]: 1.17-3.10; OR = 2.21, 95% CI: 1.09-4.45). CONCLUSION An association was observed between occupational hazards based on ERS and FBG trajectories. The risk of FBG trajectory levels increase with an increase in ERS.
Humans ; Male ; Adult ; Blood Glucose/analysis* ; China ; Prospective Studies ; Occupational Exposure/adverse effects* ; Risk Factors ; Middle Aged ; Steel ; Fasting/blood* ; Metal Workers ; East Asian People

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Vertebral refracture following percutaneous vertebral augmentation (PVA) is commonly seen in elderly patients with osteoporotic thoracolumbar compression fractures (OTLCF). It can lead to recurrent pain, loss of vertebral height, progression of kyphosis, and even neurological dysfunction, significantly impairing patients′ quality of life. Current diagnosis and treatment face multiple challenges, including high misdiagnosis rate, difficulty in choosing between surgical and non-surgical treatment options, lack of standardized surgical protocols, interference from intralesional bone cement during procedures, inadequate stability of internal fixation in osteoporotic bone, and suboptimal compliance of anti-osteoporotic therapy. Establishing a standardized diagnostic and therapeutic framework is urgently needed. To standardize the management process and improve outcomes for vertebral refractures after PVA in elderly OTLCF patients, Spinal Trauma Group of the Orthopedic Branch of Chinese Medical Doctor Association organized experts in the field to develop Guideline for the diagnosis and treatment of vertebral refracture after percutaneous vertebral augmentation in elderly patients with osteoporotic thoracolumbar compression fractures ( version 2025), based on current literature and clinical experience, and adhering to principles of scientific rigor and clinical applicability. A total of 11 recommendations were proposed, encompassing diagnosis, treatment, and rehabilitation of vertebral refracture after PVA in elderly patients with OTLCF, aiming to provide a foundation for a standardized management.

Objective To observe the value of deep learning model for automatically segmenting prostate on large-field T2WI based on integrated 68Ga-prostate specific membrane antigen(PSMA)PET/MRI.Methods Ninety male patients with prostate tumors who underwent 68Ga-PSMA PET/MRI were retrospectively enrolled and divided into training set(n=72)and validation set(n=18)at the ratio of 4∶1.Models were established based on 3D SegResNet and 3D Unet deep learning neural networks,respectively.Taken physicians'manual segmentation results as reference standards,the performances of models for segmenting the peripheral zone(PZ)and central zone(CZ)+transition zone(TZ)of prostate on large-field T2WI were evaluated.Results In both training and validation sets,the Dice similarity coefficient(DSC)of 3D SegResNet deep learning model for segmenting prostate on T 2WI were both higher than that of 3D Unet model(both P＜0.05),the 95％Hausdorff distance(HD95)of SegR esNet deep learning model for segmenting prostate CZ+TZ was lower than that of 3D Unet model(both P＜0.05),while DSC and HD95 of these 2 models for segmenting prostate CZ+TZ were superior to PZ(all P＜0.05).Conclusion 3D SegResNet deep learning model could be used to automatically segment prostate on large-field T2WI based on integrated 68Ga-PSMA PET/MRI.

OBJECTIVE To study material basis of Xianglian Pill(XLP)in vivo and in vitro using UPLC-Q-TOF-MS/MS technique,and to qualitatively analyze the main components of Xianglian Pill as well as the prototypical components and metabolites that were absorbed into the blood.METHODS A Thermo Accucore C18 column(2.1 mm×100 mm,2.6 μm)was used with 0.1%formic acid in water(A)-acetonitrile(B)as the mobile phase in a gradient elution mode,the column temperature was 40℃,and the flow rate was 0.4 mL·min-1 with the injection volume of 4 μL.The mass spectrometry information was collected by using the electros-pray ionization(ESI)ion source in the positive-negative ion scan mode.RESULTS By analyzing the precise relative molecular mass,retention times,secondary fragments and other mass spectrometry information of the components,and comparing them with the mass spectrometry information of the corresponding control products and relevant literature information,a total of 75 chemical compo-nents were finally identified in the extract of Xianglian Pill,including alkaloids,sesquiterpenoids,flavonoids,limonins and organic acids.In addition,16 prototypical components and 15 metabolites were identified in the plasma of the mice after the administration of the drug.Most of the prototypical components found in the plasma were alkaloids,and the metabolic pathways of these components in vivo were mainly hydroxylation,demethylation,reduction,hydrolysis,hydrogenation and glucuronidation.CONCLUSION The method can be used for the rapid identification of the external and internal components of Xianglian Pill,and its analytical results lay the foundation for further basic research on the pharmacological substances.