ObjectiveBased on whole-animal mass spectrometry imaging technology， spatial metabolomics was used to characterize in situ the metabolic alteration patterns in the lungs and brain of a rat model of lung heat-induced cough and asthma， as well as after treatment with Xiebai San. MethodsNine Sprague-Dawley （SD） rats were randomly divided into a blank group （physiological saline）， a model group （physiological saline）， and a Xiebai San group （9 g·kg^-1）， with three rats in each group. The model group and the Xiebai San group were both induced using lipopolysaccharide-ovalbumin （LPS-OVA） to establish an asthma rat model. After treatment with Xiebai San， the animals were euthanized on day 21 and rapidly frozen in liquid nitrogen to preserve morphology. Whole-animal tissue sections were prepared using a cryomicrotome， and imaging was performed using the Air-flow-assisted Desorption Electrospray Ionization Mass Spectrometry Imaging （AFADESI-MSI） platform. Based on the corresponding optical images， ion data of metabolites from the lung and brain tissues of each group were extracted. Differential metabolites were analyzed using SIMCA and GraphPad Prism 9.0 software. Metabolites were identified using the HMDB （https：//hmdb.ca/） and LipidMAPS^® （https：//www.lipidmaps.org/） databases， and metabolic changes in the lungs and brain were analyzed. ResultsMass spectrometry imaging showed that， after Xiebai San intervention， components such as neoglycyrrhizin and glycyrrhizin from Glycyrrhizae Radix et Rhizoma， as well as palmitamide from Lycii Cortex， were significantly distributed in the lung and brain tissues of rats. Lung analysis indicated that substances with anti-inflammatory effects， such as citric acid， were significantly decreased （P0.01）， while lipid metabolites such as lysophosphatidylethanolamine （LPE 17：1）， LPE （22：4）， and LPE （19：0） （P0.01） were significantly increased， showing a marked inflammatory response in the model group. After Xiebai San intervention， these conditions were notably improved. Analysis of metabolic changes in brain tissue showed that， compared with the blank group， amino acid and fatty acid metabolic pathways in the model group exhibited restricted alterations. Among them， levels of aspartic acid， glutamic acid， fatty acid （FA 18：5）， hydroxy fatty acids （FAHFA 36：0；O）， FA （6：1；O6）， and LPE （18：1） increased， whereas FA （16：0） and FA （20：4） significantly decreased. Administration of Xiebai San improved these metabolic abnormalities in the brain. Systematic analysis of lung and brain metabolic changes in rats with lung heat-induced cough and asthma showed that antioxidant unsaturated phospholipid substances were significantly decreased in the model group， suggesting oxidative stress and inflammation-related lung-brain axis responses after the onset of lung heat-induced cough and asthma. ConclusionUsing whole-animal mass spectrometry imaging combined with spatial metabolomics revealed the in vivo distribution of Xiebai San constituents， characterized the metabolic alterations in the lungs and brain caused by lung heat-induced cough and asthma， and systematically demonstrated the lung-brain axis inflammatory responses and the regulatory effects of Xiebai San. These findings provide valuable information for the study of Chinese medicine in lung heat-induced cough and asthma.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

ObjectiveBased on whole-animal mass spectrometry imaging technology， spatial metabolomics was used to characterize in situ the metabolic alteration patterns in the lungs and brain of a rat model of lung heat-induced cough and asthma， as well as after treatment with Xiebai San. MethodsNine Sprague-Dawley （SD） rats were randomly divided into a blank group （physiological saline）， a model group （physiological saline）， and a Xiebai San group （9 g·kg^-1）， with three rats in each group. The model group and the Xiebai San group were both induced using lipopolysaccharide-ovalbumin （LPS-OVA） to establish an asthma rat model. After treatment with Xiebai San， the animals were euthanized on day 21 and rapidly frozen in liquid nitrogen to preserve morphology. Whole-animal tissue sections were prepared using a cryomicrotome， and imaging was performed using the Air-flow-assisted Desorption Electrospray Ionization Mass Spectrometry Imaging （AFADESI-MSI） platform. Based on the corresponding optical images， ion data of metabolites from the lung and brain tissues of each group were extracted. Differential metabolites were analyzed using SIMCA and GraphPad Prism 9.0 software. Metabolites were identified using the HMDB （https：//hmdb.ca/） and LipidMAPS^® （https：//www.lipidmaps.org/） databases， and metabolic changes in the lungs and brain were analyzed. ResultsMass spectrometry imaging showed that， after Xiebai San intervention， components such as neoglycyrrhizin and glycyrrhizin from Glycyrrhizae Radix et Rhizoma， as well as palmitamide from Lycii Cortex， were significantly distributed in the lung and brain tissues of rats. Lung analysis indicated that substances with anti-inflammatory effects， such as citric acid， were significantly decreased （P0.01）， while lipid metabolites such as lysophosphatidylethanolamine （LPE 17：1）， LPE （22：4）， and LPE （19：0） （P0.01） were significantly increased， showing a marked inflammatory response in the model group. After Xiebai San intervention， these conditions were notably improved. Analysis of metabolic changes in brain tissue showed that， compared with the blank group， amino acid and fatty acid metabolic pathways in the model group exhibited restricted alterations. Among them， levels of aspartic acid， glutamic acid， fatty acid （FA 18：5）， hydroxy fatty acids （FAHFA 36：0；O）， FA （6：1；O6）， and LPE （18：1） increased， whereas FA （16：0） and FA （20：4） significantly decreased. Administration of Xiebai San improved these metabolic abnormalities in the brain. Systematic analysis of lung and brain metabolic changes in rats with lung heat-induced cough and asthma showed that antioxidant unsaturated phospholipid substances were significantly decreased in the model group， suggesting oxidative stress and inflammation-related lung-brain axis responses after the onset of lung heat-induced cough and asthma. ConclusionUsing whole-animal mass spectrometry imaging combined with spatial metabolomics revealed the in vivo distribution of Xiebai San constituents， characterized the metabolic alterations in the lungs and brain caused by lung heat-induced cough and asthma， and systematically demonstrated the lung-brain axis inflammatory responses and the regulatory effects of Xiebai San. These findings provide valuable information for the study of Chinese medicine in lung heat-induced cough and asthma.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

The Pharmacopeia of the People’s Republic of China 2025 Edition (referred to as the Chinese Pharmacopoeia 2025 Edition, ChP 2025) will be promulgated and implemented. This article introduces the process of development of ChP 2025 Edition (Volume Ⅱ), including the selection, the revision of general notices,the addition and revision of drug monographs, etc., and provides some analysis and examples to illustrate,which can facilitate the readers to understand and implement the ChP 2025 Edition (Volume Ⅱ).

To introduce the general thinking, guidelines, work objectives and elaboration process of the general technical requirements adopted by volume Ⅳ of the Chinese Pharmacopoeia 2025 Edition, and to summarize and figure out the main characteristics on dosage forms, physico-chemical testing, microbial and biological testing, reference standards and guidelines The newly revised general chapters of pharmacopoeia give full play to the normative and guiding role of the Chinese Pharmacopoeia standard, track the frontier dynamics of international drug regulatory science and the elaboration of monographs, expand the application of state-of-the-art technologies, and steadily promote the harmonization and unification with the ICH guidelines； further enhance the overall capacity of TCM quality control, actively implement the 3 R principles on animal experiments, and practice the concept of environmental-friendly； replace and/or reduce the use of toxic and hazardous reagents, strengthen the requirements of drug safety control This paper aims to provide a full-view perspective for the comprehensive, correct understanding and accurate implementation of general technical requirements included in the Chinese Pharmacopoeia 2025 Edition.

BACKGROUND:The treatment of early knee osteoarthritis can be achieved through two knee preservation treatments:Unicondylar knee arthroplasty and high tibial osteotomy.However,further exploration is needed to determine whether there are differences in knee joint recovery between the two knee preservation surgeries at different stages after surgery. OBJECTIVE:To compare the efficacy and related complications of unicondylar knee arthroplasty and high tibial osteotomy in the treatment of varus osteoarthropathy of the knee,and to provide a reference for clinical decision. METHODS:A total of 103 patients with varus osteoarthritis of the knee underwent surgical treatment in the Affiliated Hospital of Nantong University from September 2018 to September 2022 were selected.Among them,86 patients were followed up for more than 1 year.According to different surgical methods,the patients were divided into unicondylar knee arthroplasty group(49 cases)and high tibial osteotomy group(37 cases).Knee function,pain,and line of force correction were evaluated before surgery,4 weeks,3 months,6 months,and 1 year after surgery in both groups.Hospital for special surgery knee score,functional score of Western Ontario and McMaster Universities Osteoarthritis Index,changes of lateral space of the knee joint,range of motion,proprioception(position sense),and postoperative activity recovery speed were evaluated comprehensively. RESULTS AND CONCLUSION:(1)There were no significant differences in preoperative hospital for special surgery knee score,Western Ontario and McMaster Universities Osteoarthritis Index score and lateral knee compartment size between the two groups.(2)The hospital for special surgery knee score of patients undergoing unicondylar knee arthroplasty was better than that of patients undergoing high tibial osteotomy within 4 weeks after surgery(P<0.05).At 3 and 6 months after surgery,compared with the improvement of the two groups,the hospital for special surgery knee score in the unicondylar knee arthroplasty group was lower than that in the high tibial osteotomy group,and the difference was significant(P<0.05).The range of motion flexion value and position perception of patients undergoing high tibial osteotomy were significantly better than those undergoing unicondylar knee arthroplasty 6 months after surgery(P<0.05).(3)The unicondylar knee arthroplasty group was better than the high tibial osteotomy group in terms of the speed of knee movement recovery(P<0.05).(4)However,there was no significant difference between the two groups in the change of hospital for special surgery knee score,range of motion,and the width of lateral knee space during 1-year follow-up.(5)All patients were followed up for more than 1 year,and no adverse complications were found during the follow-up.(6)It is indicated that the short-term effect of knee functional recovery in patients with high tibial osteotomy is better than that in patients with unicondylar knee arthroplasty,but there is no significant difference in medium-and long-term efficacy between the two kinds of surgery for medial knee arthritis.

BACKGROUND:Zinc-based alloy medical implant materials have excellent mechanical properties,complete degradability and good biocompatibility,and are mainly used in orthopedic implants,cardiovascular stents,bile duct stents,tracheal stents,nerve catheters,etc. OBJECTIVE:To review the research progress of biodegradable zinc-based alloys in bone defect repair and prospect the promising research direction and achievements of zinc-based materials. METHODS:After searching PubMed,Web of Science,WanFang Data,and CNKI databases from the establishment of the database to June 2023,various relevant articles on biodegradable zinc-based alloys for bone implant material research were collected.The basic characteristics of biodegradable zinc based alloys were summarized,and the role of zinc-based alloys in promoting bone tissue repair was sorted and summarized.The current research hotspots and shortcomings were discussed. RESULTS AND CONCLUSION:(1)Zinc-based alloys have good biocompatibility.Using zinc-based alloys as the matrix material,with the help of scaffold structure construction technology and coating optimization process,the bone conductivity of zinc-based alloys will be effectively improved,and their degradation products will have efficient bone induction to regulate the gene expression of osteoblasts and osteoclasts,thereby promoting the repair and reconstruction of bone defects.(2)However,in the research on optimizing zinc-based alloys,the coating process is relatively insufficient,and additive loading technology is still lacking.(3)Zinc-based alloys have excellent mechanical and biological properties.Through special processes,their bone conductivity and osteoinductivity can be increased to effectively improve their ability to promote bone repair and reconstruction,and it is expected to further achieve the development of personalized transplant materials.Further research and development are needed to optimize the integration of coating and additive loading technologies into zinc-based alloys.

Objective: To explore the plasma metabonomic characteristics of patients with type 2 diabetes mellitus and turbid toxin accumulation syndrome. Methods: One hundred and three patients with type 2 diabetes mellitus and turbid toxin accumulation syndrome were enrolled from November 2023 to February 2024 in the First Teaching Hospital of Tianjin University of Traditional Chinese Medicine and 54 healthy individuals were recruited. The general data of the two groups were analyzed, and the plasma metabolite content was detected using ultra-high performance liquid chromatography-Orbitrap mass spectrometry. Construct an orthogonal partial least squares discriminant analysis model to screen metabolites with significant intergroup changes. The variable importance in projection≥ 1, |log2FC|>1, and P<0.05 were used as the criteria for the screening of differential metabolites. Annotate differential metabolites using internal databases and the human metabolome database, and perform pathway analysis using MetaboAnalyst website. Results: There was no statistically significant difference in gender and age between the two groups.Seventeen potential differential metabolites were identified. The D-4′-phosphopantothenate, 2, 6-dichloroindophenol, 4-methylphenol, hypoxanthine, 11, 12-epoxyeicosatrienoic acids, oleamide, 3-phenyllactic acid contents were higher in patients with type 2 diabetes mellitus and turbid toxin accumulation syndrome than in healthy individuals(P<0.05); 3-anisic acid, 3-iodo-octadecanoic acid, mebendazole, β-alanine, citric acid, trans-aconitic acid, geranyl diphosphate, lysophosphatidylcholine(18∶2), phosphatidylethanolamine(18∶1), and caprolactam contents were lower in patients with type 2 diabetes mellitus and turbid toxin accumulation syndrome than in healthy individuals(P<0.05). Ten metabolic pathways were identified, including the key metabolic pantothenate and coenzyme A biosynthesis pathways. Conclusion Metabolic differences were observed between patients with type 2 diabetes mellitus and turbid toxin accumulation syndrome and healthy individuals, and the underlying mechanism may involve the pantothenate and coenzyme A biosynthesis pathways, jointly mediated by D-4′-phosphopantothenate and β-alanine.

Immobilized enzyme-based enzyme electrode biosensors, characterized by high sensitivity and efficiency, strong specificity, and compact size, demonstrate broad application prospects in life science research, disease diagnosis and monitoring, etc. Immobilization of enzyme is a critical step in determining the performance (stability, sensitivity, and reproducibility) of the biosensors. Random immobilization (physical adsorption, covalent cross-linking, etc.) can easily bring about problems, such as decreased enzyme activity and relatively unstable immobilization. Whereas, directional immobilization utilizing amino acid residue mutation, affinity peptide fusion, or nucleotide-specific binding to restrict the orientation of the enzymes provides new possibilities to solve the problems caused by random immobilization. In this paper, the principles, advantages and disadvantages and the application progress of enzyme electrode biosensors of different directional immobilization strategies for enzyme molecular sensing elements by specific amino acids (lysine, histidine, cysteine, unnatural amino acid) with functional groups introduced based on site-specific mutation, affinity peptides (gold binding peptides, carbon binding peptides, carbohydrate binding domains) fused through genetic engineering, and specific binding between nucleotides and target enzymes (proteins) were reviewed, and the application fields, advantages and limitations of various immobilized enzyme interface characterization techniques were discussed, hoping to provide theoretical and technical guidance for the creation of high-performance enzyme sensing elements and the manufacture of enzyme electrode sensors.