ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

BACKGROUND:Socket-shield technique can effectively maintain labial soft and hard tissues,but the incidence of postoperative complications such as exposure and displacement of root shield is relatively high.It is speculated that the root shield may be exposed and displaced due to excessive load after long-term function of dental implants. OBJECTIVE:Through three-dimensional finite element analysis,we aim to study the influence of varying root shield thicknesses on the stress distribution,equivalent stress peaks,and displacement in the root shield,periodontal ligaments,implant,and surrounding alveolar bone under normal occlusal loading.We also attempt to analyze the correlation between the thickness of the root shield and occurrence of mechanical events such as root shield exposure,displacement,and fracture. METHODS:Cone-beam CT data of a patient who met the indication standard of socket-shield technique for maxillary central incisor were retrieved from database.Reverse engineering techniques were used to build models of the maxillary bone and root shield,while forward engineering was used to create models for the implant components based on their parameters.Models depicting various root shield thicknesses(0.5,1.0,1.5,and 2.0 mm)were created using Solidworks 2022 software.ANSYS Workbench 2021 software was then used to simulate and analyze the effects of varying root shield thicknesses on stress distribution,equivalent stress peaks,and displacement of the root shields,periodontal ligaments,implants,and surrounding alveolar bone under normal occlusion. RESULTS AND CONCLUSION:(1)In all root shield models,the stress was concentrated on the palatal cervical side,both sides of the edges and the lower edge of the labial side.As the thickness of the root shield increased,the equivalent stress peak and displacement showed a decreasing trend.The 0.5 mm thickness model produced a stress concentration of 176.20 MPa,which exceeded the yield strength(150 MPa)of tooth tissue.(2)The periodontal ligament stress in each group was concentrated in the neck margin and upper region.With the increase of root shield thickness,the equivalent stress peak and displacement of periodontal ligament showed a decreasing trend.(3)Implant stress in all models was concentrated in the neck of the implant and the joint of the implant-repair abutment,and the labial side was more concentrated than the palatal side.With the increase of root shield thickness,the equivalent stress peak of the implant in the model showed an increasing trend.(4)In each group of models,stress of cortical bone concentrated around the neck of the implant and the periphery of the root shield,and the labial side was more concentrated than the palatal side.With the increase of the thickness of the root shield,the equivalent stress peak around the root shield decreased;the peak value of the equivalent stress of the bone around the neck of the implant showed an increasing trend.In the model,the stress of cancellous bone was mainly concentrated around the neck of the lip of the implant,the top of the thread,the root tip and the lower margin of the root shield,and the labial side was more concentrated than the palatal side.With the increase of the thickness of the root shield,the peak value of the equivalent stress of the bone around the root shield in the model showed a decreasing trend.The minimum principal stress of cortical bone in each group of models was concentrated around the neck of the implant,exhibiting a fan-shaped distribution.As the thickness of the root shield increased,the minimum principal stress of cortical bone showed an increasing trend.(5)These results indicate that different thicknesses of the root shield have different biomechanical effects.The root shield with a thickness of 0.5 mm is easy to fracture.For patients with sufficient bone width,the root shield with a thickness of 2.0 mm is an option to reduce the risk of complications such as root shield exposure,fracture,and displacement.Meanwhile,it should be taken into account to protect the periodontal ligament in the preparation process,and rounding treatments ought to be carried out on both sides and the lower edge of the root shield.

Psoriasis is a common chronic inflammatory systemic disease in dermatology. Its high prevalence， recurrence rate， and numerous comorbidities impose a significant physical and mental burden on patients. With the continuous advancement of modern medicine， the emergence of biological agents has improved clinical efficacy， making it possible to overcome psoriasis， in addition to classical treatments. However， in clinical practice， adverse reactions， drug resistance， recurrence rates， and immune drift cannot be ignored. Traditional Chinese medicine （TCM） has a history of thousands of years in treating psoriasis， demonstrating good efficacy， high safety， and a low recurrence rate， but a standardized management system is lacking. Therefore， the 25^th Clinical Diseases Responding Specially to TCM Treatment Series （Psoriasis） Youth Salon， hosted by the Chinese Association of Chinese Medicine and organized by the Youth Committee of the Chinese Association of Chinese Medicine， invited 29 experts and scholars from TCM， Western medicine， and interdisciplinary fields to actively discuss the "Advantages， Challenges， and Clinical Transformation of TCM and Western Medicine in the Diagnosis and Treatment of Psoriasis". The experts at the meeting concluded that the advantages of TCM in the treatment of psoriasis are as follows. Firstly， in the TCM-led treatment plan， TCM's understanding of psoriasis follows the principle of combining the differentiation of disease and syndrome. This approach distinguishes the basic contradiction from the current main contradiction and enables a clear grasp of the dynamic process of psoriasis development. Based on the system of syndrome differentiation and treatment， TCM intervention is applied to address the current main contradiction， and the optimal TCM treatment plan is formulated by combining internal and external treatments. Adhering to the principle of "what is visible outside must be addressed inside"， TCM can prevent and treat psoriasis comorbidities early by differentiating syndrome types. Secondly， in the integrated TCM and Western medicine treatment plan， the combination of both methods not only enhances efficacy but also reduces the adverse reactions of immunosuppressants and biological agents， lowering the recurrence rate. This conference provides a reference for the diagnosis and treatment of psoriasis using TCM and integrated TCM and Western medicine， opening up new ideas for clinical and basic research and guiding future research directions.

To implement the Opinions of the State Council of the Central Committee of the Communist Party of China on Promoting the Inheritance and Innovative Development of Traditional Chinese Medicine， delve into the diseases specifically responding to traditional Chinese medicine （TCM）， and serve the building of advantageous specialties， clinical talent cultivation， national research layout， and academic innovation， the Chinese Association of Chinese Medicine sponsored the salons in multiple fields to discuss the diseases specifically responding to TCM. On August 26， 2023， the 25^th salon on the diseases specifically responding to TCM was held in Shanghai. In view of the advantages of TCM and integrated traditional Chinese and Western medicine in the diagnosis and treatment of psoriasis， Chinese and western medicine experts and interdisciplinary researchers carried out extensive and in-depth discussions and formed specific suggestions and consensus on the diagnosis and treatment of psoriasis with TCM and integrated traditional Chinese and Western medicine. However， there was still a lack of detailed research path. Under the guidance of the Chinese Association of Chinese Medicine， this paper analyzes the problems in the diagnosis and treatment of psoriasis from the occurrence and development of psoriasis. According to the advantages and characteristics of TCM and integrated traditional Chinese and Western medicine in the diagnosis and treatment of psoriasis， this paper puts forward the main points of research layout for psoriasis from the three aspects of psoriasis diagnosis and treatment， comorbidity prevention， and chronic disease management as follows： ① optimization of the syndrome differentiation system for psoriasis， ② optimization of assessment indicators for psoriasis， ③ recurrence mechanisms of psoriasis， ④ construction and research of TCM prevention and treatment of psoriasis recurrence， ⑤ construction of the comorbidity spectrum and TCM theoretical system of psoriasis， ⑥ comorbidity mechanisms of psoriasis. Furthermore， this article proposed the research layout and directions， expected goals and values， and funding priorities. Therefore， on the basis of the series of salons about psoriasis as a disease specifically responding to TCM， this article puts forward the research paradigm of psoriasis， aiming to facilitate the high-quality development of TCM and provide reference for the national research layout， the research and development of new TCM preparations， the selection of research topics， and the formulation of guidelines and consensus.

Aim To investigate the synergistic sensiti-zation effect of saikosaponin D(SSD)combined with temozolomide(TMZ)on glioblastoma cells(GBM)and its molecular mechanism.Methods The sensitiv-ity of RG-2,U251 and LN-428 GBM cell lines to SSD and TMZ was analyzed by CCK-8 method combined with HE staining,and the optimal compatible concen-tration was screened.The effect of HE staining com-bined with Hoechst fluorescence staining on the prolif-eration of GBM cell line was detected by clonal forma-tion experiment.The autophagosome formation of GBM cells was observed by monodansylcadaverine(MDC)staining.The expression and distribution of endoplas-mic reticulum stress-related factors and apoptosis and autophagy proteins were detected by Western blot and ICC.Results The sensitivity order of GBM cells to TMZ was RG-2＞U251＞LN-428.The results of com-bined administration showed the synergistic inhibitory effect of SSD combined with TMZ on proliferation of GBM cell lines,which was confirmed by cell cloning formation experiment.Compared with the TMZ group,Hoechst fluorescence staining showed a significant in-crease in the number of nuclear bright staining in the combined administration group.MDC fluorescence staining showed that there were more dense green parti-cles in the cytoplasm of SSD/TMZ plus group than that of TMZ group.Western blot results showed that com-pared with TMZ group,the expression of ER stress markers GRP78,CHOP,p-PERK and ATF6 signifi-cantly increased in SSD/TMZ group(P＜0.05).The expressions of apoptosis proteins caspase-12,caspase-9,caspase-3,cleaved caspase-3,Bax and autophagy proteins LC3 and Beclin-1 significantly increased(P＜0.05),which were verified by ICC test.Conclusions SSD can cooperate with TMZ to inhibit the prolifera-tion of GBM cells and induce apoptosis and autophagy,and enhance the sensitivity of GBM cells to TMZ by ac-tivating endoplasmic reticulum stress pathway.

Gap junction(GJ),also known as gap junction,is widely found between neurons and glial cells,and can connect neighboring cells and mediate the transmission of electrical sig-nals between neighboring cells.The GJ channel,which exists between neurons and mediates intercellular electrical signaling,is also known as an electrical synapse.Connexins(Cxs)are the molecular basis of GJ,and are expressed to different degrees in different neurons and glial cells.The presence of GJ mediates different functions among neurons and glial cells,which further influences the establishment of various mature neural circuits,re-flecting the importance of GJ in the maintenance of neural cir-cuits.This review summarizes the relationship between GJ and neural circuits in relation to the effects of GJ and different Cxs on neurons and glial cells,providing new research ideas for the treatment of neuropsychiatric disorders.

Objective:To explore the effects of repeated transcranial magnetic stimulation(rTMS)at different stimulating sessions on upper limb motor function and brain functional connectivity in stroke patients,targeting on stimu-late the contralateral premotor cortex(PMC). Method:Sixty patients with upper limb motor dysfunction after ischemic stroke were randomly assigned to 6-week rTMS group,4-week rTMS group,2-week rTMS group or control group,each with 15 participants.Up-per limb Brunnstrom stage,Fugl-Meyer assessment for upper extremity(FMA-UE)and Wolf motor function test(WMFT)were assessed before and after treatment to evaluate behavioral outcomes.The functional connec-tivity was analyzed by resting state functional magnetic resonance imaging(rs-fMRI)with the contralateral PMC as the seed point. Result:After treatment,the FMA-UE and WMFT scores of the 2-week rTMS group were significantly differ-ent from those of the 4-week and 6-week rTMS groups(P＜0.05),but there was no significant difference be-tween the 4-week rTMS group and the 6-week rTMS group(P＞0.05).Functional connectivity analysis using contralateral PMC as a seed point showed that functional connections were enhanced between contralateral PMC and ipsilateral anterior central gyrus,as well as the contralateral middle temporal gyrus and precuneus af-ter rTMS treatment(P＜0.05). Conclusion:The 4-week rTMS group has the best duration-benefit compared with the 2-week rTMS group and the 6-week rTMS group.The probable mechanism was related to that rTMS treatment could reduce the ef-fect of interhemispheric inhibition on motor cortex,and then enhance the cortico-cortical functional connectivi-ty in the contralateral hemisphere effectively,resulting in the recovery of upper limb motor function.

Objective To investigate the distribution and antimicrobial resistance profiles of the common pathogens isolated from urine from 2015 to 2021 in the CHINET Antimicrobial Resistance Surveillance Program.Methods The bacterial strains were isolated from urine and identified routinely in 51 hospitals across China in the CHINET Antimicrobial Resistance Surveillance Program from 2015 to 2021.Antimicrobial susceptibility was determined by Kirby-Bauer method,automatic microbiological analysis system and E-test according to the unified protocol.Results A total of 261 893 nonduplicate strains were isolated from urine specimen from 2015 to 2021,of which gram-positive bacteria accounted for 23.8％(62 219/261 893),and gram-negative bacteria 76.2％(199 674/261 893).The most common species were E.coli(46.7％),E.faecium(10.4％),K.pneumoniae(9.8％),E.faecalis(8.7％),P.mirabilis(3.5％),P.aeruginosa(3.4％),SS.agalactiae(2.6％),and E.cloacae(2.1％).The strains were more frequently isolated from inpatients versus outpatients and emergency patients,from females versus males,and from adults versus children.The prevalence of ESBLs-producing strains in E.coli,K.pneumoniae and P.mirabilis was 53.2％,52.8％and 37.0％,respectively.The prevalence of carbapenem-resistant strains in E.coli,K.pneumoniae,P.aeruginosa and A.baumannii was 1.7％,18.5％,16.4％,and 40.3％,respectively.Lower than 10％of the E.faecalis isolates were resistant to ampicillin,nitrofurantoin,linezolid,vancomycin,teicoplanin and fosfomycin.More than 90％of the E.faecium isolates were ressitant to ampicillin,levofloxacin and erythromycin.The percentage of strains resistant to vancomycin,linezolid or teicoplanin was＜2％.The E.coli,K.pneumoniae,P.aeruginosa and A.baumannii strains isolated from ICU inpatients showed significantly higher resistance rates than the corresponding strains isolated from outpatients and non-ICU inpatients.Conclusions E.coli,Enterococcus and K.pneumoniae are the most common pathogens in urinary tract infection.The bacterial species and antimicrobial resistance of urinary isolates vary with different populations.More attention should be paid to antimicrobial resistance surveillance and reduce the irrational use of antimicrobial agents.

Objective To understand the distribution and changing resistance profiles of clinical isolates of Enterococcus in hospitals across China from 2015 to 2021.Methods Antimicrobial susceptibility testing was conducted for the clinical isolates of Enterococcus according to the unified protocol of CHINET program by automated systems,Kirby-Bauer method,or E-test strip.The results were interpreted according to the Clinical & Laboratory Standards Institute(CLSI)breakpoints in 2021.WHONET 5.6 software was used for statistical analysis.Results A total of 124 565 strains of Enterococcus were isolated during the 7-year period,mainly including Enterococcus faecalis(50.7％)and Enterococcus faecalis(41.5％).The strains were mainly isolated from urinary tract specimens(46.9％±2.6％),and primarily from the patients in the department of internal medicine,surgery and ICU.E.faecium and E.faecalis strains showed low level resistance rate to vancomycin,teicoplanin and linezolid(≤3.6％).The prevalence of vancomycin-resistant E.faecalis and E.faecium was 0.1％and 1.3％,respectively.The prevalence of linezolid-resistant E.faecalis increased from 0.7％in 2015 to 3.4％in 2021,while the prevalence of linezolid-resistant E.faecium was 0.3％.Conclusions The clinical isolates of Enterococcus were still highly susceptible to vancomycin,teicoplanin,and linezolid,evidenced by a low resistance rate.However,the prevalence of linezolid-resistant E.faecalis was increasing during the 7-year period.It is necessary to strengthen antimicrobial resistance surveillance to effectively identify the emergence of antibiotic-resistant bacteria and curb the spread of resistant pathogens.