OBJECTIVES: To study the clinical effect of the L-shape technique combined with concentrated growth factor on the horizontal bone defects of maxillary anterior teeth. METHODS: Twenty-five implants from 25 patients who underwent single maxillary anterior tooth implantation with simultaneous bone grafting were selected as the study subjects. Based on the bone grafting techniques, the patients were divided into a test group (L-shaped technique with guided bone regeneration combined with concentrated growth factor, 11 cases) and a control group (traditional guided bone regeneration combined with concentrated growth factor, 14 cases). The early discomfort and wound healing conditions in the two groups at two weeks after surgery were compared. The horizontal bone thickness, vertical bone thickness, and grayscale values in the augmentation area were measured immediately postsurgery and six months after surgery. Implant stability, hard tissue resorption within six months, and grayscale values were compared between the two groups. RESULTS: Differences in early discomfort, wound healing, implant stability, and grayscale values between the two groups were not statistically significant (P>0.05). Vertical bone thickness in the test group was significantly better than that in the control group at six months after surgery (P<0.05). The variation in horizontal bone thickness in the test group was significantly higher than that in the control group (P<0.05). CONCLUSIONS The application of the L-shape technique with concentrated growth factor for horizontal bone defects in the anterior maxillary area yielded satisfactory short-term results in terms of bone augmentation, early discomfort, wound healing, and implant stability at six months after surgery.
Humans ; Maxilla/diagnostic imaging* ; Intercellular Signaling Peptides and Proteins/therapeutic use* ; Wound Healing ; Bone Transplantation/methods* ; Dental Implantation, Endosseous/methods* ; Bone Regeneration ; Male ; Female ; Adult ; Dental Implants, Single-Tooth ; Middle Aged

OBJECTIVES: This study aims to investigate factors influencing dental arch development in patients aged 0-6 years with cleft palate after Sommerlad-Furlow (SF) palatoplasty. METHODS: A total of 183 patients who underwent primary SF repair for cleft lip and palate before 18 months of age were included. Follow-ups were conducted at different ages, and digital dental casts of the maxillary dental arch were obtained using 3-matic Research 12.0 software. The length and width of the dental arch and palate were measured to explore developmental changes in the maxillary dental arch of the patients after the procedure. The study also investigated the influence of gender, age, cleft palate type, and relaxation incision on maxillary dental arch development. RESULTS: After SF, maxillary dental arch measurements showed statistically significant differences between children aged 0-2 years and those aged 3-6 years (P<0.05). However, no statistically significant differences were observed among different age groups within the 3-6 years range. Statistically significant differences were detected between males and females, with males having greater width of the posterior dental arch and palate (P=0.001) and shorter length of the anterior dental arch and entire dental arch (P<0.05). The unilateral cleft lip and palate group had shorter dental arch length (P<0.01) and wider posterior palate (P<0.01) than the cleft palate only group. Maxillary dental arch measurements had no statistically significant differences between groups with or without a relaxing incision. CONCLUSIONS Gender and age influence the width of the maxillary dental arch in children aged 0-6 years after SF, while age and cleft palate type affect dental arch length.
Humans ; Child, Preschool ; Male ; Cleft Palate/surgery* ; Female ; Child ; Infant ; Dental Arch/growth & development* ; Maxilla/growth & development* ; Cleft Lip/surgery* ; Age Factors ; Sex Factors ; Palate/surgery* ; Infant, Newborn

This report presents a case of a 9-year-old child with a complicated crown-root fracture of the maxillary central incisor, accompanied with a root fracture. The treatment strategy was minimally invasive, focusing on vital pulp preservation, root fracture recovery, and crown restoration. The fractured crown was reattached using resin short posts to enhance retention, resulting in aesthetic and functional restoration of the anterior teeth. A 2-year follow-up revealed favorable clinical and radiographic outcomes.
Humans ; Child ; Tooth Fractures/therapy* ; Tooth Root/injuries* ; Incisor/injuries* ; Tooth Crown/injuries* ; Post and Core Technique ; Dental Restoration, Permanent/methods* ; Maxilla

Dental trauma is one of the relatively common emergencies in clinical dental practice, with a high incidence rate, and the maxillary central incisors are the most frequently affected. This article reports a case of a 17-year-old female patient who suffered traumatic complete avulsion of teeth 11 and 21, with tooth 21 lost after avulsion. The prognosis for replantation was poor due to the absence of the buccal alveolar bone wall of tooth 11. Therefore, tooth 11 was treated with extracorporeal root canal therapy and then replanted into the alveolar socket of tooth 21, which had better conditions, followed by elastic splint fixation. After 20 months of follow-up observation, the affected tooth maintained a stable functional position, with no periapical inflammation or ankylosis observed. Subsequently, delayed implant restoration at the site of tooth 11 was performed, ultimately achieving a favorable treatment outcome. This case may provide new insights and references for future clinical practices in tooth replantation.
Humans ; Female ; Tooth Replantation/methods* ; Incisor/injuries* ; Adolescent ; Tooth Avulsion/therapy* ; Maxilla ; Root Canal Therapy

OBJECTIVES: This study aimed to analyze the correlations and proportional relationships between maxillary anterior teeth (MAT) and facial measurements in Han Chinese individuals with the most attractive smiles, as evaluated by dental professionals. METHODS: Ten dentists with more than 5 years of clinical experience from different professional directions in a tertiary stomatological hospital were selected to evaluate the smile attractiveness of volunteers by visual analogue scale (VAS). Eighty-eight Han volunteers with the most attractive smile were selected. The perceived width of the MAT, the dimensions (height and width) of the maxillary central incisors (MCI), and the facial dimensions (intercanthal distance, interzygomatic distance, interalar distance, facial height and lower facial height) of the volunteers were measured on the frontal photos of the smile, digital oral model, and 3D face model. Pearson correlation analysis was performed to analyze linear correlations, and regression analysis was carried out to explore the proportional relationships. Reliability analysis using the intraclass correlation coefficient verified the stability of these proportional relationships. In addition, the correlations between MAT perceived width and the proportional relationships of (MCI) height to width ratio, with facial dimensions were explored and their reliability was verified. RESULTS: In Han Chinese individuals with the most attractive smiles, as evaluated by dental professionals, the Pearson correlation coefficients among MAT perceived widths were 0.813, 0.389, and 0.560. A proportional relationship existed between the lateral incisor and central incisor, and the ratio was 0.729. No significant correlations were found between MCI and the inner canthal distance, zygomatic distance, interalar distance, facial height, or the lower one-third facial height except for a negative correlation (r=-0.357) between MCI height and facial height in males and a positive correlation (r=0.249) between MCI width and interalar width when genders were combined. CONCLUSIONS Correlations exist among MAT perceived widths in Han Chinese individuals with the most attractive smiles, as evaluated by dental professionals. Partial correlations are observed between MCI height and width and facial measurements. The perceived width of the lateral incisor can serve as a reference indicator for predicting the perceived width of the central incisor, providing a reference for the aesthetic restoration of MAT in the Han ethnicity population.
Adult ; Female ; Humans ; Male ; China ; Esthetics, Dental ; Face/anatomy & histology* ; Incisor/anatomy & histology* ; Maxilla/anatomy & histology* ; Smiling ; East Asian People

OBJECTIVES: To compare the clinical effects of concentrated growth factor (CGF) membrane and Bio-Gide ^® collagen membrane, combined with Bio-Oss ^® sticky bone respectively in alveolar ridge preservation (ARP) of maxillary anterior teeth. METHODS: Thirty patients who needed alveolar ridge preservation after maxillary anterior tooth extraction were selected and randomly assigned to the Bio-Gide group and the CGF group. In both groups, the extraction sockets were tightly filled with the Bio-Oss^® sticky bone. In the Bio-Gide group used Bio-Gide^® collagen membrane to cover the upper edge of the Bio-Oss^® sticky bone and closed the wound. The CGF group, the CGF membrane was covered on the upper edge of the Bio-Oss^® sticky bone and the wound was closed. The soft tissue wound healing status at 10 days after ARP, the changes in alveolar ridge height and width immediately after ARP and at 6 months after ARP, and the doctor-patient satisfaction at 6 months after ARP were compared and evaluated between the two groups. RESULTS: At 6 months after ARP, there was no statistically significant difference in the changes of alveolar bone width and height between the two groups (P>0.05). However, the CGF group showed better performance in soft tissue healing after ARP and doctor-patient satisfaction, and the differences were statistically significant (P<0.05). CONCLUSIONS Compared with the Bio-Gide^® collagen membrane, the combined application of CGF membrane and Bio-Oss^® sticky bone can lead to better soft tissue healing after ARP of maxillary anterior teeth and higher doctor-patient satisfaction, showing obvious advantages in ARP of maxillary anterior teeth.
Humans ; Maxilla/surgery* ; Tooth Extraction ; Alveolar Process/surgery* ; Membranes, Artificial ; Alveolar Ridge Augmentation/methods* ; Intercellular Signaling Peptides and Proteins/therapeutic use* ; Minerals/therapeutic use* ; Collagen ; Wound Healing ; Tooth Socket/surgery* ; Bone Substitutes/therapeutic use* ; Male ; Female ; Middle Aged ; Alveolar Bone Loss/prevention & control* ; Adult

OBJECTIVES: Color doppler flow imaging (CDFI) and cone-beam computed tomography (CBCT) were utilized to evaluate changes in mucosal vascular parameters and the osteogenic effects following guided bone regeneration (GBR) in the maxillary anterior region using trapezoidal or modified triangular flaps. METHODS: Patients undergoing single maxillary anterior dental implant surgery with GBR were randomly allocated into two groups: a trapezoidal flap group and a modified triangular flap group. After GBR surgery, the mucosal vascular parameters at the surgical site were assessed at various time intervals (preoperative, 2 h, 1 and 3 days, and 1, 2, and 4 weeks postoperative) using CDFI. In addition, the effects of bone augmentation were evaluated through the analysis of CBCT images obtained preoperatively, 2 h, and 6 months postoperative. RESULTS: The buccal mucosa in the edentulous area had a lower blood flow rate than the corresponding tooth in the same jaw, and the difference was statistically significant (P<0.001). The mucosal blood flow rate in the surgical area increased compared with that in the preoperative period. The peak flow rate was recorded at 2 weeks postoperatively and then decreased to levels comparable to those of the reference tooth. A statistically significant difference was observed between the two groups (P<0.05). The buccal alveolar ridge width of the implant platform was reduced by (1.3±0.9) mm in the trapezoidal flap group and (0.9±0.7) mm in the modified triangular flap group, respectively, at 6 months postoperatively, compared with 2 h postoperative. The buccal alveolar ridge width of the 5 mm from the implant platform was reduced by (0.9±0.6) mm and (0.3±0.6) mm, respectively. The buccal alveolar ridge width of the 10 mm from the implant platform was reduced by (0.6±0.8) mm and (0.2±0.6) mm, respectively. The height of the alveolar ridge was reduced by (1.9±1.4 ) mm and (1.4±1.3) mm. The change in graft volume was (136±78 ) mm³ and (114±85) mm³. However, the differences between the two groups were not statistically significant (P>0.05). CONCLUSIONS When a tooth is missing, blood flow to the buccal mucosa on the side of the missing tooth is reduced. The modified triangular flap group demonstrated superior microcirculation of blood flow in the operative area after GBR of the maxillary anterior teeth. Trapezoidal and modified triangular flaps achieved the anticipated bone augmentation during bone augmentation surgery in the maxillary anterior region, with no considerable effect on the changes in alveolar bone size parameters.
Humans ; Surgical Flaps/blood supply* ; Bone Regeneration ; Mouth Mucosa/blood supply* ; Cone-Beam Computed Tomography ; Osteogenesis ; Maxilla/surgery* ; Male ; Female ; Guided Tissue Regeneration, Periodontal/methods*

Tooth resorption is the degradation of dental hard tissue due to the continuous action of odontoclasts. External cervical resorption refers to the cervical resorption of a tooth due to destruction and/or defects of the periodontal ligament or subepithelial cementum. In this paper, we report a case of maxillary central incisor with external cervical resorption after dental trauma and orthodontic treatment. The resorption site and morphology of the affected tooth were thoroughly analyzed by cone beam computed tomography prior to the operation. Dental operating microscope and layered external repair with composite resin and bioceramics ensured a perfect restoration of the resorption, and the vital pulp was preserved. The 6-year follow-up indicated a favorable treatment effect.
Humans ; Composite Resins ; Cone-Beam Computed Tomography ; Incisor/surgery* ; Maxilla ; Microsurgery/methods* ; Tooth Resorption/etiology*

Dental trauma is a common oral condition in children. For single-type trauma to young permanent teeth, timely treatment often results in a high survival rate for both the teeth and the pulp. However, in cases of complex dental trauma or when supernumerary teeth are impacted near the apex of the injured tooth, the prognosis is less predictable. This article reports a case of root fracture in an immature maxillary permanent central incisor combined with impacted supernumerary tooth in the apical region. After supernumerary tooth extraction and pulp revascularization therapy, the case demonstrated a good treatment outcome over a nearly 10-year follow-up period.
Child ; Humans ; Incisor/injuries* ; Maxilla ; Tooth Extraction ; Tooth Fractures/complications* ; Tooth Root/injuries* ; Tooth, Impacted/surgery* ; Tooth, Supernumerary/surgery*

OBJECTIVE: To compare the aesthetic effects of anterior maxilla clockwise rotation combined with segmental Le Fort Ⅰ osteotomy and whole maxilla clockwise rotation on improving paranasal concavity in patients with Class Ⅲ maxillofacial deformity. METHODS: A non-randomized controlled trial was designed, and 21 patients diagnosed with skeletal Class Ⅲ maxillofacial deformity were included. In the study, 11 patients in the test group were treated by segmental Le Fort Ⅰ osteotomy combined with anterior maxilla clockwise rotation, and 10 patients in the control group were treated by whole maxilla clockwise rotation. The CBCT and 3D photography of preoperative (T0), 2 weeks postoperative (T1), and 6 months postoperative (T2) were collected respectively, and the three-dimensional cephalometry was carried out. The differences of specific parameters between the two groups were compared by independent sample t-test, including saggital displacement of the cheek mass point (CK) and subalare point (SA), nasolabial angle, occlusal plane angle and labial inclination angle of the upper incisor. RESULTS: There were no significant differences of the parameters on T0 between the two groups. The average sagittal displacement of the upper incisors of the test group was (-0.71±1.67) mm and smaller than that of control group [(2.26±1.68) mm], t=-4.052, P < 0.05. The average angle of the occlusal plane clockwise rotation of the test group was 1.46°±2.38° and smaller than that of the control group (4.31°±1.83°), t=-3.047, P < 0.05. The angle of anterior maxilla clockwise rotation was 11.73°±2.81° during the surgery. The average saggital displacement of the paranasal soft tissue landmarks of the test group from T0 to T2 was larger than that of the control group [CK point, (4.96±1.18) mm vs. (2.01± 1.50) mm, P < 0.05;SA point, (5.19±1.17) mm vs. (2.69±1.45) mm, P < 0.05]. The labial inclination angle of the upper incisor of the test group was 112.15°±5.40° in T2 and significantly smaller than that of the control group (122.38°±8.83°), t=-3.237, P < 0.05. The nasolabial angle of the test group was 106.54°±12.82° in T2 and significantly larger than that of the control group (93.90°±12.46°), t=2.288, P < 0.05. CONCLUSION Compared with whole maxilla clockwise rotation, anterior maxilla clockwise rotation combined with segmental Le Fort Ⅰ osteotomy can increase the saggital displacement of the paranasal soft tissue, correct labial inclination of the upper incisors and the acute naso-labial angle and better improve the paranasal aesthetic defects in patients with Class Ⅲ maxillofacial deformity with less changing on the saggital orientation of the upper incisors and the occlusal plane angle.
Humans ; Maxilla/surgery* ; Female ; Male ; Osteotomy, Le Fort/methods* ; Malocclusion, Angle Class III/surgery* ; Adult ; Cephalometry ; Young Adult ; Rotation ; Adolescent