Objective To evaluate the short-term efficacy of transcatheter aortic valve replacement (TAVR) using Venus A-Plus valve delivery system in patients with severe aortic stenosis. Methods The clinical data of patients undergoing TAVR in our hospital from August 2018 to March 2022 were collected and they were divided into a Venus A-Plus and a Venus A group according to the type of valve delivery system used. The perioperative data of the two groups were compared. Results A total of 121 patients were included, including 70 patients in the Venus A-Plus group [45 males and 25 females with a mean age of (67.81±6.62) years], and 51 patients in the Venus A group [33 males and 18 females with a mean age of (68.25±7.01) years]. All patients underwent TAVR, and the postoperative hemodynamic features (left ventricular ejection fraction, mean cross-valve pressure difference, peak flow rate) were significantly improved (P<0.05). There was no statistical difference in surgical success rate, all-cause mortality, conversion to thorax opening, valve-in-valve placement, moderate or above perivalvular regurgitation, new left bundle branch block or new right bundle branch block between the two groups (P>0.05). Conclusion TAVR with Venus A-Plus valve delivery system in patients with severe aortic stenosis shows comparable efficacy to the first-generation Venus A system and is satisfactory, safe and reliable.

Objective To analyze the short-term clinical outcomes of emergency conversion to surgery during transcatheter aortic valve replacement (TAVR). Methods Clinical data of patients who underwent emergency surgical conversion from TAVR in the Department of Cardiovascular Surgery, the Second Hospital of Hebei Medical University, from 2018 to 2023 were collected. Postoperative follow-up results at 1 month were recorded. Results A total of 253 patients underwent TAVR, of whom 11 (4.3%) required emergency conversion to surgery. Among these 11 patients, 7 were male and 4 were female, with a mean age of (69.55±5.01) years. The primary cause for emergency surgical conversion was valve stent displacement (63.6%), followed by left ventricular perforation/rupture (18.2%) and significant perivalvular regurgitation persisting after a second valve implantation (18.2%). One (9.1%) patient died intraoperatively. Among the 10 surviving patients, postoperative complications included pulmonary infection in 8 patients, severe pneumonia in 7, pleural effusion in 3, liver dysfunction in 8, renal dysfunction in 3, upper gastrointestinal bleeding in 5, cerebrovascular complications in 1, atrial fibrillation in 1, ventricular premature contractions in 1, atrioventricular block in 1, and complete left bundle branch block in 3. At 1-month postoperative follow-up, one additional patient died, yielding a 30-day mortality rate of 18.2% after TAVR emergency surgical conversion. The quality of life improved significantly compared to preoperative status in 9 (81.8%) patients, and no patients were readmitted for cardiovascular diseases. Conclusion The incidence of emergency conversion to surgery during TAVR is low, but the rates of surgical complications and 30-day postoperative mortality are high. Nevertheless, when severe complications occur during TAVR, emergency conversion to surgery can still yield satisfactory short-term clinical outcomes for a majority of these patients.

Objective To investigate the new-onset conduction block after transcatheter aortic valve replacement (TAVR) and summarize the relevant experience. Methods The perioperative data of TAVR patients in the Second Hospital of Hebei Medical University from January 2016 to February 2023 were collected, and the new-onset incidence of conduction block after TAVR was analyzed retrospectively. Results Finally 352 patients were included, including 225 males and 127 females, with an average age of (67.2±5.1) years, among whom 256 patients were treated with Venus-A valves, 69 patients with Vita-Flow valves, and 27 patients with J-Valve valves. There were 38 (10.8%) patients of new-onset postoperative block. There were 6 (1.7%) patients of new-onset postoperative grade Ⅲ atrioventricular block, including 5 (2.0%) patients of Venus-A and 1 (1.4%) patient of Vita-Flow. Conduction function was restored in 2 patients within 14 days after surgery, and failed to be restored in 4 patients, who then received permanent pacemaker implantation in the Department of Cardiology. There were 27 (7.7%) patients of new left bundle branch block after surgery, including 22 (8.6%) patients of Venus-A, 4 (5.8%) patients of Vita-Flow and 1 (3.7%) patient of J-Valve; and conduction function was restored within 7 days after surgery in 23 patients, and 5 (1.4%) patients developed new right bundle branch blocks after surgery including 4 (1.5%) patients of Venus-A and 1 (1.4%) patient of Vita-Flow. Conclusion New-onset conduction block is a common complication after TAVR, and the new-onset rate of left bundle branch block is the highest, followed by the grade Ⅲ atrioventricular block. Mastering reasonable methods and applying appropriate strategies can effectively reduce the new-onset rate of postoperative conduction block and improve the overall success rate of TAVR surgery.

To satisfy the growing healthcare demands of the public, it is essential to develop a public service platform for vaccination. This initiative aligns with national policies, optimizes resource allocation, innovates service models, enhances service efficiency, and reduces service costs. Drawing on relevant national policies and regulatory requirements, as well as the notable achievements and practical experiences gained through the exploration and innovation of vaccination service models across various regions, this paper proposes expert recommendations. It defines the essential components and functional specifications for public service platforms, focusing on public needs such as electronic vaccination record management, appointment management, the promotion of electronic vaccination certificates, vaccination certificate verification for school enrollment, vaccination site navigation, and science communication and public engagement. The recommendations aim to serve as a reference for the development of vaccination public service platforms nationwide.

Proteins are fundamental carriers as the structural elements and biochemically active entities responsible for catalysis, transport, and regulation. These functions are depending on the protein folding into precise three-dimensional structures, interacting with ligands, and conformational changes. This article reviews the recent progress of nanopores in single-molecule protein sensing, involving the identification of polypeptides and proteins, the conformation changes of protein folding, the molecular structure responsible to the pH of solutions, the molecular interactions, and protein sequencing. These studies provide clues to understand life activities and facilitate the early diagnosis of diseases and design of drugs for precise treatment.
Nanopores ; Proteins/chemistry* ; Biosensing Techniques/methods* ; Protein Folding ; Humans

Objective To investigate the correlation between the epidermal growth factor receptor(EGFR)gene polymorphisms and non-small cell lung cancer(NSCLC)in Yunnan Han population.Methods A total of 407 NSCLC patients and 526 healthy controls were included.Five SNPs(rs1050171,rs2072454,rs2227983,rs1140475 and rs2293347)in EGFR were genotyped using TaqMan assay.The association between SNPs and NSCLC,as well as pathological types,were analyzed.Results In dominant mode,rs2072454 C/T-T/T may be a risk factor for NSCLC(P=0.004;OR=1.50,95%CI 1.14～1.96).There was a significant difference in genotype frequency between the SCC group and the control group(P=0.007),but no difference in allele frequency after Bonferroni correction(P>0.01);In the dominant mode,C/T-T/T at this locus relative to C/C was a risk for AC(P=0.002;OR=1.86,95%CI 1.24～2.80).rs1050171 A/A had a significantly higher risk of SCC in recessive mode(P=0.006,OR=2.66,95%CI 1.33～5.33).In dominant mode,rs2227983 A/G-G/G/G was a risk factor for the development of SCC relative to A/A(P=0.007;OR=1.83,95%CI 1.15～2.89).Conclusion The SNPs rs2072454,rs1050171 and rs2227983 in EGFR gene may be associated with the risk of NSCLC development as well as the type of pathology in Yunnan Han population.

Objective To investigate the correlation between single nucleotide polymorphisms(SNPs)of the EGF gene,including rs11569017(A>T),rs2237051(A>G),rs3733625(C>T),and rs4444903(A>G),and the risk of non-small cell lung cancer(NSCLC)in a Han population of Yunnan.Methods A total of 439 patients with NSCLC and 520 healthy controls were recruited in Yunnan Province between January 2022 and December 2023.Genotyping of four SNP loci in the EGF gene was performed using TaqMan probes,followed by analysis of allele,genotype,genetic model,and haplotype distribution frequencies between NSCLC and control groups.Stratified analyses were further conducted based on NSCLC pathological types and clinical stages.Results The rs2237051 locus showed significant differences in allele(P=0.011)and genotype(P=0.042)frequencies between the squamous cell carcinoma(SCC)group and the control group.The frequency of the A allele was lower in the SCC group than in the control group(OR=0.71,95%CI 0.54～1.85),but there was no difference after Bonferroni correction(P>0.0125).Under the log-additive model,the rs2237051-2G/G+A/G genotype was associated with an increased risk of SCC(P=0.01;OR=1.42,95%CI 1.08～1.86).However,the association lost statistical significance after Bonferroni correction(P>0.0125).The haplotype rs11569017-rs2237051-rs3733625-rs4444903 has no difference between the two groups(P>0.0125).The stratified analysis revealed no significant associations between the genetic loci and different disease stages(P>0.0125).Conclusion In the Yunnan Han population,the individuals carrying the rs2237051-A allele of the EGF gene have a significantly lower risk of squamous lung cancer,but further functional experiments are needed to verify the protective mechanism.

Objective To explore the value of 3D printing technology in transcatheter aortic valve replacement(TAVR)for bicuspid aortic stenosis.Methods We retrospectively analyzed the clinical data of patients who underwent TAVR for bicuspid aortic stenosis at the Department of Cardiac Surgery of the Second Hospital of Hebei Medical University between January 2020 and January 2023.Seven-ty patients were divided into 3D printing and non-3D printing groups of 35 each,based on whether or not 3D printing technology was applied,and the perioperative clinical data of the two groups were compared.Results The patients' postoperative symptoms signifi-cantly improved compared with those before the operation,and the left ventricular ejection fraction increased to varying degrees.Compared with the non-3D printing group,the operation time,X-ray irradiation time.and transvalvular time in the 3D printing group were signifi-cantly shortened,and the probabilities of the occurrence of postoperative"flap-to-flap"implantation and conduction block were signifi-cantly reduced,with statistically significant differences(P＜0.05).There was no statistically significant difference(P＞0.05)in the inci-dence of moderate and above perivalvular leakage,valve displacement,or conversion to thoracotomy between the two groups after surgery.Conclusion 3D printing technology can effectively guide the TAVR treatment of bicuspid aortic stenosis.While significantly shortening the operation time,it can effectively increase the success rate of TAVR and reduce the risk of adverse events,providing a new approach for the transcatheter treatment of bicuspid aortic stenosis.

Objective To explore the value of 3D printing technology in transcatheter aortic valve replacement(TAVR)for bicuspid aortic stenosis.Methods We retrospectively analyzed the clinical data of patients who underwent TAVR for bicuspid aortic stenosis at the Department of Cardiac Surgery of the Second Hospital of Hebei Medical University between January 2020 and January 2023.Seven-ty patients were divided into 3D printing and non-3D printing groups of 35 each,based on whether or not 3D printing technology was applied,and the perioperative clinical data of the two groups were compared.Results The patients' postoperative symptoms signifi-cantly improved compared with those before the operation,and the left ventricular ejection fraction increased to varying degrees.Compared with the non-3D printing group,the operation time,X-ray irradiation time.and transvalvular time in the 3D printing group were signifi-cantly shortened,and the probabilities of the occurrence of postoperative"flap-to-flap"implantation and conduction block were signifi-cantly reduced,with statistically significant differences(P＜0.05).There was no statistically significant difference(P＞0.05)in the inci-dence of moderate and above perivalvular leakage,valve displacement,or conversion to thoracotomy between the two groups after surgery.Conclusion 3D printing technology can effectively guide the TAVR treatment of bicuspid aortic stenosis.While significantly shortening the operation time,it can effectively increase the success rate of TAVR and reduce the risk of adverse events,providing a new approach for the transcatheter treatment of bicuspid aortic stenosis.

To satisfy the growing healthcare demands of the public, it is essential to develop a public service platform for vaccination. This initiative aligns with national policies, optimizes resource allocation, innovates service models, enhances service efficiency, and reduces service costs. Drawing on relevant national policies and regulatory requirements, as well as the notable achievements and practical experiences gained through the exploration and innovation of vaccination service models across various regions, this paper proposes expert recommendations. It defines the essential components and functional specifications for public service platforms, focusing on public needs such as electronic vaccination record management, appointment management, the promotion of electronic vaccination certificates, vaccination certificate verification for school enrollment, vaccination site navigation, and science communication and public engagement. The recommendations aim to serve as a reference for the development of vaccination public service platforms nationwide.