The efficacy of root canal therapy, as a core intervention for endodontic and periapical diseases, is highly dependent on the effectiveness of antimicrobial drugs. Although traditional drugs such as calcium hydroxide, chlorhexidine, and antibiotic pastes commonly used in the clinic play a role in preventing and controlling infections, they have obvious limitations. These drugs influence the mechanical properties of dentin, insufficiently solubilize necrotic tissues, and are susceptible to bacterial resistance, which makes achieving the desired effectiveness and safety difficult. Traditional macromolecular root canal drugs also face the challenge of the complexity of the root canal system. With the rapid development of material science in recent years, new antimicrobial agents have emerged. Metallic nanomaterials such as silver nanoparticles and zinc oxide nanoparticles are widely used in the medical field due to their unique physicochemical properties and superior antimicrobial properties. Chitosan nanoparticles have superior biosafety, calcium hydroxide nanoparticles compensate for the limitations of traditional calcium hydroxide formulations, and quaternary ammonium polyethyleneimine nanoparticles can confer antimicrobial properties to existing oral materials. Novel antimicrobial nanoparticles using nano-delivery systems, such as mesoporous calcium silicate and mesoporous silica, carry antimicrobial molecules with significant advantages in terms of anti-biofilm, biosafety, and promotion of tissue repair. Further, these agents reduce drug resistance, which improves prospects for application compared to traditional root canal disinfection drugs. The breakthrough of nanotechnology provides a novel direction for the innovation of root canal treatment drugs. Therefore, this paper reviews the research progress of nano-antimicrobial materials in root canal therapy.

Objective To explore the value of oral contrast-enhanced ultrasonography (OCEUS) combined with contrast-enhanced CT in predicting preoperative T staging in patients with gastric cancer. Methods A retrospective analysis was conducted on 80 patients with gastric cancer confirmed via endoscopic biopsy or postoperative pathology at the First People’s Hospital of Jining from January 2021 to November 2024. The cohort included 56 males and 24 females, aged 38-79 years, with a median age of 55.9 years. All patients underwent both OCEUS and contrast-enhanced CT within one week prior to surgery. T staging of gastric cancer was determined using OCEUS, contrast-enhanced CT, or their combination. The results were compared with pathological T staging, and statistical differences in accuracy were analyzed. Results Pathological T staging identified T1 in 9 cases, T2 in 16 cases, T3 in 42 cases, and T4 in 13 cases. OCEUS indicated T1 in 6 cases, T2 in 14 cases, T3 in 50 cases, and T4 in 10 cases, with an accuracy rate of 80.0%. Contrast-enhanced CT indicated T1 in 4 cases, T2 in 12 cases, T3 in 52 cases, and T4 in 12 cases, with an accuracy rate of 75.0%. The combination of OCEUS and contrast-enhanced CT indicated T1 in 6 cases, T2 in 15 cases, T3 in 47 cases, and T4 in 12 cases, with an accuracy rate of 87.5%. The combined approach demonstrated significantly higher accuracy in preoperative T staging compared to either method alone (P < 0.05). Conclusion The combination of OCEUS and contrast-enhanced CT improves the accuracy of preoperative T staging in gastric cancer patients, providing valuable support for their diagnosis and treatment.

Processing for deodorization is widely used in the production of animal-derived Chinese medicinal materials. In this study, Heracles Neo ultra-fast gas-phase electronic nose combined with chemometrics was employed to analyze the overall odor difference of Cervi Cornu Pantotrichum(focusing on that derived from Cervus nippon Temminck in this study) before and after processing. The results showed that the electronic nose effectively distinguished between the medicinal materials and decoction pieces of Cervi Cornu Pantotrichum. HS-GC-MS was used to identify and quantify the volatile components in the medicinal materials and decoction pieces of Cervi Cornu Pantotrichum, and 35 and 37 volatile components were detected in the medicinal materials and decoction pieces, respectively. The medicinal materials and decoction pieces contained 28 common volatile components contributing to the odor of Cervi Cornu Pantotrichum. The odor activity value(OAV) of each volatile component was calculated based on the olfactory threshold and relative content. The results showed that there were 17 key odor substances such as isovaleraldehyde, 2-methylbutanal, isobutyraldehyde, hexanal, and methanethiol in the medicinal materials and decoction pieces of Cervi Cornu Pantotrichum. All of them had bad odor and were the main source of the odor of Cervi Cornu Pantotrichum. The results of principal component analysis(PCA) and orthogonal partial least squares-discriminant analysis(OPLS-DA) showed that there were significant differences in volatile components between the medicinal materials and decoction pieces of Cervi Cornu Pantotrichum. Based on the thresholds of P<0.05 and Variable Importance in Projection(VIP)>1, 21 differential volatile odor components were screened out. Among them, isopentanol, isovaleraldehyde, 2-methylbutanal, n-nonanal, and dimethylamine were the key differential odor compounds between the medicinal materials and decoction pieces of Cervi Cornu Pantotrichum. The odor compounds and their relative content reduced, and some flavor substances such as esters were produced after processing with wine, which was the main reason for the reduction of the odor after processing of Cervi Cornu Pantotrichum.
Odorants/analysis* ; Electronic Nose ; Gas Chromatography-Mass Spectrometry/methods* ; Animals ; Volatile Organic Compounds/analysis* ; Deer ; Drugs, Chinese Herbal/chemistry*

Haematitum and Limonitum are two iron-containing mineral medicines included in the 2020 edition of the Chinese Pharmacopoeia. They have similar main components and major differences in their property, flavor, channel tropism, and clinical uses. In this study, we investigated the surface properties, mineral composition, mineral dissociation, elemental composition, and iron state of Haematitum and Limonitum to explore their mineralogical differences. Scanning electron microscopy(SEM), specific surface and porosity analyzer, X-ray diffractometer(XRD), X-ray photoelectron spectrometer(XPS), and advanced mineral identification and characterization system(AMICS) were used to analyze the mineralogy of Haematitum and Limonitum. The results showed that Haematitum had an angular surface with granular attachments and a specific surface area of 17.04 m~2·g~(-1). In comparison, Limonitum had a smooth and flat surface with a bundled acicular crystal structure and a specific surface area of 46.29 m~2·g~(-1). Haematitum consists of 31 detectable minerals containing 18 elements, with the major element, iron(44.5% Fe~(2+) and 55.5% Fe~(3+)) distributed in 17 minerals, including hematite, iron oxide, knebelite, siderite, and magnesioferrite. Limonitum consists of 32 detectable minerals containing 17 elements, with the major element, iron(14.5% Fe~(2+) and 85.5% Fe~(3+)) distributed in 19 minerals, including limonite, iron oxide, chlorite, and knebelite. In summary, the elemental composition of Haematitum and Limonitum does not differ greatly, but there are large differences in the mineral composition and iron state. The large specific surface area and strong adsorption capacity of Limonitum may be one of the mechanisms of its anti-diarrheal action. The Fe_2O_3 and illite contained in Haematitum and Limonitum may be the key substances for their hemostasis effects. The mineralogical differences are expected to provide a reference for explaining the scientific connotation of mineral medicine and laying a material foundation for studying its mechanism of action.
Iron/analysis* ; Minerals/chemistry* ; Drugs, Chinese Herbal/chemistry* ; X-Ray Diffraction ; Microscopy, Electron, Scanning ; Photoelectron Spectroscopy

This study aimed to characterize and identify the non-volatile components in aqueous and ethanolic extracts of the stems and leaves of Rhododendron tomentosum by using sensitive and efficient ultra-performance liquid chromatography-quadrupole-time of flight mass spectrometry(UHPLC-Q-TOF-MS) combined with a self-built information database. By comparing with reference compounds, analyzing fragment ion information, searching relevant literature, and using a self-built information database, 118 compounds were identified from the aqueous and ethanolic extracts of R. tomentosum, including 35 flavonoid glycosides, 15 phenolic glycosides, 12 flavonoids, 7 phenolic acids, 7 phenylethanol glycosides, 6 tannins, 6 phospholipids, 5 coumarins, 5 monoterpene glycosides, 6 triterpenes, 3 fatty acids, and 11 other types of compounds. Among them, 102 compounds were reported in R. tomentosum for the first time, and 36 compounds were identified by comparing them with reference compounds. The chemical components in the ethanolic and aqueous extracts of R. tomentosum leaves and stems showed slight differences, with 84 common chemical components accounting for 71.2% of the total 118 compounds. This study systematically characterized and identified the non-volatile chemical components in the ethanolic and aqueous extracts of R. tomentosum for the first time. The findings provide a reference for active ingredient research, quality control, and product development of R. tomentosum.
Rhododendron/chemistry* ; Chromatography, High Pressure Liquid/methods* ; Drugs, Chinese Herbal/chemistry* ; Mass Spectrometry/methods* ; Plant Leaves/chemistry*

OBJECTIVE: To investigate the effectiveness of free palmaris longus tendon graft reconstruction in the treatment of gouty tophus erosion lesions in flexor tendon of wrist and hand. METHODS: A retrospective analysis was conducted on 8 patients with gouty tophus erosion lesions in flexor tendon of wrist and hand who underwent free palmaris longus tendon graft reconstruction between June 2017 and December 2023. All patients were male, aged 22-65 years, with an average of 45.9 years. The duration of gout history ranged from 2 to 18 years, with an average of 8.8 years. The duration from the discovery of gouty tophus to operation ranged from 12 to 26 months, with an average of 17.6 months. The gouty tophus eroded the flexor pollicis longus tendon in 4 cases, with Verdan flexor tendon zones being Ⅰ-Ⅱ in 1 case and Ⅳ-Ⅴ in 3 cases. The flexor digitorum profundus tendons were affected in 2 cases for the index finger, 1 for the middle finger, and 1 for the ring finger, all located in zone Ⅳ-Ⅴ. The long axis of the gouty tophus ranged from 2.3 to 4.5 cm, with an average of 3.4 cm. All 8 patients presented with limited finger flexion and extension. Among them, 4 cases were accompanied by median nerve compression symptoms, and 1 case had associated bone and joint destruction in the hand. The total active motion (TAM) of the affected finger was (81.3±30.2)° before operation according to the hand function evaluation criteria for tendon repair by the Chinese Society of Hand Surgery of the Chinese Medical Association, and the functional evaluation was poor. The harvested palmaris longus tendon intraoperatively was 7-9 cm in length. RESULTS: Surgical incisions in all 8 patients healed by first intention, with no infections, graft non-union, or significant adhesion complications. All patients were followed up 8-25 months, with an average of 14.8 months. Numbness symptoms resolved in all 4 patients who presented with median nerve compression symptoms. Patients did not experience wrist pain or other discomfort, and function was not compromised. At last follow-up, according to the hand function evaluation criteria for tendon repair by the Chinese Society of Hand Surgery of the Chinese Medical Association, the TAM of 8 patients was (197.5±55.8)°, which significantly improved when compared with that before operation ( t=11.638, P<0.001); the hand function of 1 patient with gouty tophus in zone Ⅰ-Ⅱ flexor pollicis longus tendon was good, and the other 7 patients were excellent. CONCLUSION Free palmaris longus tendon graft reconstruction demonstrates good effectiveness in treating gouty tophus erosion lesions in flexor tendon of wrist and hand.
Humans ; Middle Aged ; Male ; Adult ; Tendons/surgery* ; Retrospective Studies ; Aged ; Gout/complications* ; Wrist/surgery* ; Plastic Surgery Procedures/methods* ; Hand/surgery* ; Treatment Outcome ; Young Adult

OBJECTIVE: To explore the effectiveness of multi-segment inverted Y-shaped vein transplantation using the anterior lateral malleolar venous network for repair of amputated palm injury distal to the superficial palmar arch. METHODS: Between September 2018 and July 2023, 5 patients with amputated palm injury distal to the superficial palmar arch were treated. There were 3 males and 2 females with an average age of 35.4 years (range, 29-52 years). The time from injury to admission was 1-6 hours (mean, 3.2 hours). The multi-segment inverted Y-shaped vein transplantation in the anterior lateral malleolar venous network were used to repair the common and proper palmar digital arteries; the another anterior lateral malleolar venous network was used to repair the dorsal vein of the hand. The soft tissue defect of dorsal hand in 1 patient was repaired with the pedicled ilioinguinal flap, and the wound at the donor site was directly sutured. Postoperative treatment included anti-infection therapy, antispasmodic therapy, and thrombosis prevention measures. RESULTS: The partial necrosis of the fingertip of the thumb occurred in 1 case, and the marginal necrosis of the abdominal flap after operation occurred in 1 case. The remaining fingers showed good blood supply with normal tension. The incision at donor site of the abdominal flap healed by first intention. All patients were followed up 8-41 months (median, 19 months). At last follow-up, the hand contour was satisfactory; the grasping function, opposition function, and proprioception recovered, and two-point discrimination ranged from 5 to 7 mm (mean, 6 mm). According to the upper extremity function evaluation criteria issued by Hand Surgery Society of the Chinese Medical Association, the functional outcomes were excellent in 3 cases, good in 1 case, and fair in 1 case. CONCLUSION The multi-segment inverted Y-shaped vein transplantation using the anterior lateral malleolar venous network for repairing defects in the common and proper palmar digital arteries distal to the superficial palmar arch offers advantages such as superficial location, flexible harvesting, and high compatibility. This technique has demonstrated favorable outcomes in complex transmetacarpal amputation reconstruction.
Humans ; Adult ; Male ; Female ; Hand Injuries/surgery* ; Middle Aged ; Plastic Surgery Procedures/methods* ; Veins/transplantation* ; Surgical Flaps/blood supply* ; Hand/surgery* ; Treatment Outcome ; Soft Tissue Injuries/surgery*

OBJECTIVE: To explore the accuracy of human-computer interaction software in identifying and locating type C1 distal radius fractures. METHODS: Based on relevant inclusion and exclusion criteria, 14 cases of type C1 distal radius fractures between September 2023 and March 2024 were retrospectively analyzed, comprising 3 males and 11 females(aged from 27 to 82 years). The data were assigned randomized identifiers. A senior orthopedic physician reviewed the films and measured the ulnar deviation angle, radial height, palmar inclination angle, intra-articular step, and intra-articular gap for each case on the hospital's imaging system. Based on the reduction standard for distal radius fractures, cases were divided into reduction group and non-reduction group. Then, the data were sequentially imported into a human-computer interaction intelligent software, where a junior orthopedic physician analyzed the same radiological parameters, categorized cases, and measured fracture details. The categorization results from the software were consistent with manual classifications (6 reduction cases and 8 non-reduction cases). For non-reduction cases, the software performed further analyses, including bone segmentation and fracture recognition, generating 8 diagnostic reports containing fracture recognition information. For the 6 reduction cases, the senior and junior orthopedic physicians independently analyzed the data on the hospital's imaging system and the AI software, respectively. Bone segments requiring reduction were identified, verified by two senior physicians, and measured for displacement and rotation along the X (inward and outward), Z (front and back), and Y (up and down) axes. The AI software generated comprehensive diagnostic reports for these cases, which included all measurements and fracture recognition details. RESULTS: Both the manual and AI software methods consistently categorized the 14 cases into 6 reduction and 8 non-reduction groups, with identical data distributions. A paired sample t-test revealed no statistically significant differences (P>0.05) between the manual and software-based measurements for ulnar deviation angle, radial ulnar bone height, palmar inclination angle, intra-articular step, and joint space. In fracture recognition, the AI software correctly identified 10 C-type fractures and 4 B-type fractures. For the 6 reduction cases, a total of 24 bone fragments were analyzed across both methods. After verification, it was found that the bone fragments identified by the two methods were consistent. A paired sample t-tests revealed that the identified bone fragments and measured displacement and rotation angles along the X, Y, and Z axes were consistent between the two methods. No statistically significant differences(P>0.05) were found between manual and software measurements for these parameters. CONCLUSION Human-computer interaction software employing AI technology demonstrated comparable accuracy to manual measurement in identifying and locating type C1 distal radius fractures on CT imaging.
Humans ; Male ; Female ; Radius Fractures/surgery* ; Middle Aged ; Adult ; Aged ; Aged, 80 and over ; Tomography, X-Ray Computed/methods* ; Retrospective Studies ; Software ; Wrist Fractures

OBJECTIVE: To explore the functional rehabilitation of patients with rheumatoid arthritis (RA) after total knee arthroplasty (TKA). METHODS: A retrospective analysis was conducted on 101 patients who needed TKA due to rheumatoid arthritis (RA) involving both knees from January 2017 to December 2020, including 16 males and 85 females, aged from 41 to 65 years old with an average of (58.13±5.53) years old;body mass index (BMI) ranged from 16.88 to 33.33 kg·m^-2 with an average of (23.16±3.49) kg·m^-2;63 patients with grade 1, 29 patients with grade 2, and 9 patients with grade 3 according to classification of American Society of Anesthesiologists (ASA). According to the latest follow-up results at 12 months after operation, 82 patients returned to work and 19 patients did not return to work. Visual analogue scale(VAS) was used to evaluate the degree of pain relief before operation and 12 months after operation, and work, osteoarthritis and joint replacement questionnaire (WORQ) was used to evaluate knee joint activity status of all patients before and after operation, and the working ability index was used to evaluate working ability of all patients before operation and 12 months after operation. For the 82 patients who returned to work, the labor time stopped before operation and within 12 months after operation was compared, and the changes in labor grades, types of work and labor hours of patients before and after operation were recorded. For the 19 patients who did not return to work, the specific reasons for their non-return to work was analyzed;the postoperative satisfaction of patients was evaluated by using Likert satisfaction scale. All patients were followed up for at least 12 months. VAS was decreased from (6.49±0.59) before operation to (1.10±0.43) at 12 months after operation (P<0.05);for WORQ questionnaire survey, scores of walking, sitting posture, standing and stair climbing were increased from (1.07±0.35), (1.05±0.29), (1.06±0.34) and (1.14±0.42) before operation to (3.00±0.00), (2.87±0.33), (2.95±0.21) and (2.95±0.21) after operation, respectively, had statistically significant (P<0.05);the labor work index of all patients increased from 1.11±0.46 before operation to 2.99±0.10 at 12 months after operation, and the difference was statistically significant (P<0.05). Among the 82 patients who returned to work after operation, regarding the time of stopping labor, 81 patients stopped working within 3 months before operation, 1 patient stopped working for 4 to 6 months after operation, and the number of patients who stopped working was 81, 1, and 0 respectively. Forty patients returned to work within 3 months after operation, 4 to 6 months after operation for 29 patients, and 12 months after operation for 13 patients. 95.1% (78/82) of patients engaged in light labor before operation, and 85.4% (70/82) of patients engaged in moderate labor after operation. At 12 months after operation, the types of jobs and working hours available to all patients increased compared with those before operation. Among 19 patients who did not return to work after TKA, 7 patients had poor control of rheumatoid arthritis, 5 patients still felt pain, swelling and numbness on knee joint, 2 patients had retired, and 5 patients had other reasons. Eighty-six patients (85%) expressed great satisfaction with the postoperative working ability, 8 patients (8%) expressed satisfaction with the postoperative working ability, 6 patients (6%) expressed acceptance of postoperative working ability, and 1 patient (1%) expressed dissatisfaction with postoperative working ability. CONCLUSION TKA is an effective treatment option for patients with RA. After undergoing TKA, patients could significantly improve pain and functional activities of knee joint, and effectively enhance the quality of life and working ability. For patients whose rehabilitation labor capacity is not fully met, postoperative management and personalized rehabilitation treatment need to be strengthened to achieve the best rehabilitation effect.
Humans ; Female ; Male ; Arthroplasty, Replacement, Knee/rehabilitation* ; Arthritis, Rheumatoid/physiopathology* ; Middle Aged ; Aged ; Retrospective Studies ; Adult

OBJECTIVE: To explore the current research status and hotspots in the field of biomechanics of diabetic foot by bibliometric analysis methods. METHODS: Literatures related to biomechanics of diabetic foot published in the Web of Scienc Core Collection (WoSCC) from 1981 to 2024 were searched. CiteSpace software and R language bibliometrics plugin were used to conduct a visual analysis of annual publication volume of the literature, including publication volume of each country and region, the publication situation of authors and institutions, the citation situation of individual literature, and the co-occurrence network of keywords. RESULTS: Totally 996 literatures were included, and the number of published papers increased steadily. The United States (261 papers) and China (89 papers) were the top two countries in terms of the number of published papers. The mediating centrality of the United States was 0.94, and that of China was 0.01. Scholars such as Cavanagh and institutions like the Cleveland Clinic were at the core of research in this field. High-frequency keywords include plantar pressure (plantar pressure), diabetic foot (diabetic foot), ulceration (ulcer), etc. The research focuses on plantar pressure, ulcer formation and prevention, etc. CONCLUSION Biomechanical research on diabetic foot mainly focuses on the pressure distribution on the sole of the foot, callus formation, mechanical analysis of soft tissues on the sole of the foot, and the study of plantar decompression caused by Achilles tendon elongation. The research trend has gradually shifted from focusing on joint range of motion to gait and the design of braces and assistive devices, and has begun to pay attention to muscle strength, gait imbalance and proprioception abnormalities.
Humans ; Diabetic Foot/physiopathology* ; Biomechanical Phenomena ; Bibliometrics