Stroke is one of the leading causes of disability and mortality worldwide. Research into its mechanisms and the development of therapeutic strategies heavily rely on animal models that accurately replicate the pathological features of human disease. An ideal animal model for stroke should not only reproduce the neurological deficits and pathological changes observed in clinical patients but also demonstrate good reproducibility and translational value. This review focuses on the preparation and evaluation methods of ischemic stroke animal models. Firstly, it elaborates on the selection criteria, advantages, and disadvantages of experimental animals, including rodents (rats, mice) and non-rodents (non-human primates, miniature pigs, rabbits, zebrafish). Secondly, it provides a detailed overview of the modeling principles, key procedures, and application scopes for ischemic stroke models and hemorrhagic stroke models. Furthermore, the review summarizes advances in the applications of emerging technologies—including gene editing [e.g., clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (Cas9) gene editing], multimodal imaging (e.g., two-photon microscopy, photoacoustic imaging), artificial intelligence, optogenetics, 3D bioprinting, organoid models, and multi-omics–in model optimization, precise assessment, and mechanistic investigation. Finally, based on a systematic analysis of relevant domestic and international literature from 2019 to 2024, this review discusses model selection strategies based on research objectives, a multidimensional evaluation system encompassing behavioral, imaging, and molecular pathological assessments, and envisions future directions involving technological integration to achieve model precision and individualization. This article aims to provide a comprehensive methodological reference to help researchers select appropriate animal models of stroke according to specific scientific questions.

ObjectiveTo explore the potential mechanisms of action of the modified Duhuo Jisheng Mixture （JDJM） in treating synovial lesions in knee osteoarthritis （KOA）. MethodsA total of 43 male New Zealand white rabbits were randomly allocated into a blank group （n=8） and a model group （n=35）. The KOA model was induced by immobilizing the right hind limb with a high-molecular resin plaster bandage， with a modeling period of 6 weeks， resulting in successful modeling in 32 rabbits. These rabbits were then randomly allocated to the model group， celecoxib group， JDJM group and JDJM+740Y-P group， each consisting of 8 rabbits. The celecoxib group received celecoxib via gavage at a single dose of 0.009 3 g·kg^-1， while the JDJM was administered a single dose of 6.8 mL·kg^-1 （4.515 2 g·kg^-1） of the herbal preparation via gavage. The phosphatidylinositol 3-kinase/protein kinase B/mammalian target of rapamycin （PI3K/Akt/mTOR） pathway activator + JDJM group received 4.515 2 g·kg^-1 of the herbal preparation via gavage along with an auricular vein injection of 0.15 μmol·kg^-1 740Y-P. For a period of 6 weeks， the remaining groups received an equal volume of physiological saline via gavage daily. After the medication period， the knee joint pain threshold and circumference were measured， and hematoxylin-eosin （HE） staining was performed to assess the pathological changes in the synovial tissues. Enzyme-linked immunosorbent assay （ELISA） measured the levels of interleukin-1β （IL-1β）， interleukin-6 （IL-18） and tumor necrosis factor-α （TNF-α） in the joint fluid. Real-time fluorescence quantitative polymerase chain reaction （Real-time PCR） was used to assess the mRNA expression of PI3K， Akt， mTOR， NOD-like receptor protein 3 （NLRP3）， cysteine-requiring aspartate protease-1 （Caspase-1） and gasdermin D （GSDMD） in the synovial tissues. Immunohistochemical （IHC） assay was performed to assess the protein expression of NLRP3， Caspase-1 and GSDMD. Western blot was carried out to analyze the protein expression of p-PI3K/PI3K， p-Akt/Akt， p-mTOR/mTOR， NLRP3， Caspase-1 and GSDMD. ResultsCompared to the blank group， the model group showed a significant increase in knee joint circumference and decrease in pain threshold， the synovial tissue pathology score was higher （P<0.05）， and the levels of IL-1β， IL-18， and TNF-α in the joint fluid significantly increased （P<0.01）. PI3K， Akt， mTOR phosphorylation as well as mRNA and protein expression increased （P<0.01）， while the mRNA and protein expression levels of NLRP3， Caspase-1 and GSDMD also significantly increased （P<0.01）. Compared to the model group， the celecoxib and JDJM groups exhibited a significant reduction in knee joint circumference and increase in pain threshold， the synovial tissue pathology score was lower （P<0.05）， and the levels of IL-1β， IL-18， and TNF-α in the joint fluid decreased （P<0.01）. The mRNA and protein expression of p-PI3K， p-Akt， p-mTOR， NLRP3， Caspase-1 and GSDMD were reduced （P<0.01）. Compared to the JDJM group， the JDJM+740Y-P group showed a decrease in the improvement of synovial lesions， an increase in knee joint circumference， and a decrease in pain threshold. The synovial tissue pathology score was lower （P<0.05）， and the levels of IL-1β， IL-18， and TNF-α in the joint fluid were higher （P<0.01）. The mRNA and protein expression of p-PI3K/PI3K， p-Akt/Akt， p-mTOR/mTOR， NLRP3， Caspase-1 and GSDMD increased （P<0.01）. ConclusionJDJM is effective in treating KOA. Its mechanism may involve modulating the PI3K/Akt/mTOR pathway in synovial tissues， inhibiting pyroptosis， reducing inflammatory factor release， and protecting bony structures.

OBJECTIVE: To explore the genetic etiology of 46 Chinese pedigrees affected with Hereditary multiple exostoses (HME) and provide genetic counseling and reproductive intervention. METHODS: Whole-exome sequencing and Sanger sequencing were carried out on 87 patients from the 46 pedigrees to analyze the variants of EXT1 and EXT2 genes. Pathogenicity of the variants was assessed based on the guidelines from the American College of Medical Genetics and Genomics and Association for Molecular Pathology (ACMG/AMP). Prenatal diagnosis and preimplantation genetic testing (PGT) were provided for couples with identified pathogenic mutations. This study was approved by the Medical Ethics Committee of the hospital (Ethics No.: LL-SC-SG-2014-010). RESULTS: In total 17 and 22 pathogenic variants were respectively identified in the EXT1 and EXT2 genes, among which 5 EXT1 and 12 EXT2 variants were unreported previously. Three patients with no family history were found to harbor de novo variants of the EXT1 gene. Twenty nine couples had opted for PGT or underwent prenatal diagnosis following natural conception, and 17 healthy babies were born. CONCLUSION This study has clarified the genetic etiology of 45 HME pedigrees and identified 17 novel variants, which has enriched the mutational spectrum of the EXT1 and EXT2 genes. Reproductive intervention through PGT and prenatal diagnosis have prevented the recurrence of HME in these families.
Humans ; Female ; Male ; Pedigree ; Exostoses, Multiple Hereditary/diagnosis* ; N-Acetylglucosaminyltransferases/genetics* ; Adult ; Exostosin 1 ; Asian People/genetics* ; Genetic Testing ; Exostosin 2 ; Mutation ; China ; Prenatal Diagnosis ; Pregnancy ; Genetic Counseling ; Preimplantation Diagnosis ; Exome Sequencing ; East Asian People

ObjectiveTo evaluate the clinical efficacy of Shenqi Yangxin decoction in the treatment of ischemic cardiomyopathy （ICM） with Qi and Yin deficiency and blood stasis syndrome and its effect on serum hydrogen sulfide （H₂S） and calcium ion （Ca²⁺）. MethodsA total of 64 ICM patients with Qi and Yin deficiency and blood stasis syndrome who met the inclusion criteria were randomly divided into a control group （n=32） and a treatment group （n=32）. All patients received conventional Western medicine treatment. The treatment group was additionally given Shenqi Yangxin decoction. The TCM syndrome score， Minnesota Living with Heart Failure Questionnaire （MLHFQ） score， left ventricular ejection fraction （LVEF）， N-terminal pro-B-type natriuretic peptide （NT-proBNP）， 6-minute walk test （6MWT）， New York Heart Association （NYHA） cardiac function classification， and serum H₂S and Ca²⁺ levels were compared between the two groups pre- and post-treatment. ResultsTwo cases dropped out from each group during the study. Finally， 30 patients in each group were included in the analysis. There were no significant differences in age， gender， course of coronary heart disease， underlying diseases， and laboratory tests between the two groups. Compared with baseline， the TCM syndrome score， MLHFQ score， and NT-proBNP in both treatment group and control group decreased significantly （P<0.01）， LVEF， 6MWT， and H₂S increased significantly （P<0.01）， and serum Ca²⁺ increased （P<0.05）. Compared with the control group after treatment， the MLHFQ score and NT-proBNP in the treatment group decreased （P<0.05）， the TCM syndrome score decreased significantly （P<0.01）， LVEF， 6MWT， and serum Ca²⁺ increased （P<0.05）， and H₂S increased significantly （P<0.01）. The improvement degree of the NYHA cardiac function classification in the treatment group was higher than that in the control group， but there was no significant difference. ConclusionShenqi Yangxin decoction is effective in treating ICM patients with Qi and Yin deficiency and blood stasis， which could significantly improve cardiac function and quality of life， and its therapeutic effect may be related to the regulation of serum H₂S and Ca²⁺ levels.

BACKGROUND:Arthroscopic anchor repair has become the main treatment method for rotator cuff tears at present.Among them,the insertion status of the anchor is a key factor in the success or failure of the operation.However,currently,the impact of the insertion depth of the anchor on the stress of the bone tunnel and the anchor under different bone density conditions remains unclear.OBJECTIVE:To explore the stress distribution of the bone tunnel and the anchor when the insertion depth of the anchor varies under different bone density conditions by using three-dimensional finite element analysis technology.METHODS:The CT image data of the humerus of volunteers were collected,and the models of the humerus and the anchor were constructed by using Mimics,3-Matic,and Solidworks software.In 3-Matic,holes with distances of 0,2,4,6,and 8 mm from the surface of the humerus were respectively created at the same position of the humerus and assembled with the anchor.In Mimics,values were assigned based on the CT gray value to obtain a model with normal bone mass(T value ≥-1.0).The parameters were changed to construct models with reduced bone mass(-2.5＜T value＜-1.0)and osteoporosis(T value＜-2.5).In each model,a 70 N pulling force was applied to the anchor along the direction tangent to the inner edge of the bone tunnel.The stress distribution and magnitude of the bone tunnel and the anchor when inserted at different depths under different bone density conditions were observed.RESULTS AND CONCLUSION:(1)When the insertion depth was the same,as the bone density decreased,the maximum equivalent stress of the anchor increased,while the maximum equivalent stress of the bone tunnel decreased.(2)When the bone density was the same,as the insertion depth of the anchor increased,the maximum equivalent stress of the anchor decreased.When the insertion depth was 4 mm,the stress of the bone tunnel was the smallest and the distribution was relatively uniform.The stress of the anchor was mainly distributed around the lower anchor hole and the proximal thread,and the stress of the bone tunnel was mainly at the part in contact with the proximal thread.The increase in the insertion depth would change the uniformity and pattern of the stress distribution,while the bone density had a relatively small impact on the stress distribution pattern.(3)It is concluded that the bone density of the humerus is crucial for the anchor repair of rotator cuff tears.It is recommended that clinicians measure the bone density of the greater tuberosity of the humerus before the operation.Excessive insertion depth of the anchor does not significantly increase its stability.Clinicians can conduct personalized preoperative assessments by using the finite element analysis method in combination with the actual situation of patients to achieve the best surgical results.

BACKGROUND:Arthroscopic anchor repair has become the main treatment method for rotator cuff tears at present.Among them,the insertion status of the anchor is a key factor in the success or failure of the operation.However,currently,the impact of the insertion depth of the anchor on the stress of the bone tunnel and the anchor under different bone density conditions remains unclear.OBJECTIVE:To explore the stress distribution of the bone tunnel and the anchor when the insertion depth of the anchor varies under different bone density conditions by using three-dimensional finite element analysis technology.METHODS:The CT image data of the humerus of volunteers were collected,and the models of the humerus and the anchor were constructed by using Mimics,3-Matic,and Solidworks software.In 3-Matic,holes with distances of 0,2,4,6,and 8 mm from the surface of the humerus were respectively created at the same position of the humerus and assembled with the anchor.In Mimics,values were assigned based on the CT gray value to obtain a model with normal bone mass(T value ≥-1.0).The parameters were changed to construct models with reduced bone mass(-2.5＜T value＜-1.0)and osteoporosis(T value＜-2.5).In each model,a 70 N pulling force was applied to the anchor along the direction tangent to the inner edge of the bone tunnel.The stress distribution and magnitude of the bone tunnel and the anchor when inserted at different depths under different bone density conditions were observed.RESULTS AND CONCLUSION:(1)When the insertion depth was the same,as the bone density decreased,the maximum equivalent stress of the anchor increased,while the maximum equivalent stress of the bone tunnel decreased.(2)When the bone density was the same,as the insertion depth of the anchor increased,the maximum equivalent stress of the anchor decreased.When the insertion depth was 4 mm,the stress of the bone tunnel was the smallest and the distribution was relatively uniform.The stress of the anchor was mainly distributed around the lower anchor hole and the proximal thread,and the stress of the bone tunnel was mainly at the part in contact with the proximal thread.The increase in the insertion depth would change the uniformity and pattern of the stress distribution,while the bone density had a relatively small impact on the stress distribution pattern.(3)It is concluded that the bone density of the humerus is crucial for the anchor repair of rotator cuff tears.It is recommended that clinicians measure the bone density of the greater tuberosity of the humerus before the operation.Excessive insertion depth of the anchor does not significantly increase its stability.Clinicians can conduct personalized preoperative assessments by using the finite element analysis method in combination with the actual situation of patients to achieve the best surgical results.

ObjectiveTo investigate the therapeutic efficacy of Qizhi Tongluo granules on proteinuria in membranous nephropathy （MN） and its potential protective effects and underlying mechanism against endoplasmic reticulum stress. MethodsAfter 70 Sprague-Dawley （SD） rats were adaptively fed for one week， the MN rat model was established by injecting cationic bovine serum albumin （C-BSA） into the tail vein. Rats were divided into the normal group， model group， low-dose Qizhi Tongluo granules group （2.43 g·kg^-1）， medium-dose group （4.86 g·kg^-1）， high-dose group （9.72 g·kg^-1）， and benazepril group （0.01 g·kg^-1）， with 10 rats in each group. Treatment was administered for four weeks. The 24-hour urinary total protein （UTP） content， as well as the levels of reactive oxygen species （ROS）， malondialdehyde （MDA）， and glutathione peroxidase （GPX） in renal tissues， were measured. Renal pathological changes were assessed using immunoglobulin G （IgG） staining， periodic acid-silver methenamine （PASM） staining， and transmission electron microscopy （TEM）. The localization and expression levels of glucose-regulated protein 78 （GRP78）， phosphorylated inositol-requiring enzyme 1α （p-IRE1α）， phosphorylated protein kinase R-like endoplasmic reticulum kinase （p-PERK）， activating transcription factor 4 （ATF4）， nuclear factor erythroid 2-related factor 2 （Nrf2）， and 2'-5' oligoadenylate synthetase-like protein 1 （OASL1） in rat kidneys were detected by immunohistochemistry （IHC）. The mRNA and protein expression levels of Nrf2， thioredoxin 1 （Trx1）， thioredoxin-interacting protein （TXNIP）， and OASL1 in rat kidneys were measured using real-time quantitative polymerase chain reaction （Real-time PCR） and Western blot analysis. ResultsCompared with the normal group， UTP levels were significantly increased in the model rats （P<0.05）， with obvious renal pathological damage. GPX content levels were significantly decreased in renal tissue （P<0.05）， while ROS and MDA content levels were significantly increased （P<0.05）. The expression of GRP78， p-IRE1α， p-PERK， and ATF4 proteins was significantly increased in the kidneys （P<0.05）， while the mRNA and protein expression levels of Trx1 and Nrf2 were significantly decreased （P<0.05）. The mRNA and protein expression levels of TXNIP and OASL1 were significantly increased （P<0.05）. Compared with the model group， the UTP levels of rats in the Qizhi Tongluo granules groups and the benazepril group decreased to varying degrees （P<0.05）， and renal pathological damage was significantly alleviated. The GPX content in renal tissue was significantly increased （P<0.05）， while the ROS and MDA levels were significantly decreased （P<0.05）. The expression of GRP78， p-IRE1α， p-PERK， and ATF4 proteins in the kidney was significantly decreased （P<0.05）. The mRNA and protein expression levels of Trx1 and Nrf2 were significantly increased （P<0.05）， while the mRNA and protein expression levels of TXNIP and OASL1 were significantly decreased （P<0.05）. ConclusionQizhi Tongluo granules alleviates proteinuria in MN rats by modulating the Nrf2/OASL1 signaling pathway in renal tissues to reduce endoplasmic reticulum stress， which represents its underlying mechanism.

Objective To develop and validate a risk prediction model for infiltration/extravasation in peripheral intravenous catheter therapy.Methods This retrospective study analyzed 942 patients who completed the Infiltration/Extravasation Risk Assessment Form between January and June 2023 at the First Affiliated Hospital of Army Medical University(including Departments of Neurology,Endocrinology,Gastroenterology and Hepatobiliary Surgery).Patients were allocated to a derivation cohort(n=628)and validation cohort(n=314)in a 2∶1 ratio based on catheterization chronology.The derivation cohort served for model development and internal validation,while the validation cohort underwent external validation.Logistic scoring method constructed the risk model,with Hosmer-Lemeshow(HL)test assessing goodness-of-fit and ROC curve evaluating predictive performance.Twenty-one potential risk factors were assessed,including age,gender,chronic diseases,clinician experience,treatment compliance,and total infusion volume.Results Infiltration/extravasation occurred in 48 cases(5.10%incidence:31 derivation/17 validation).Among 21 factors,15 showed significant association(P<0.05),with 6 independent predictors:junior high school education or below(OR=5.2),chronic disease history(OR=3.1),poor compliance(OR=2.8),lower extremity venipuncture(OR=4.1),total infusion≥1 000 mL(OR=3.5),and hyperosmotic/corrosive medications(OR=6.7).The final prediction model was:Y=2×(low education)+1×(chronic disease)+1×(poor compliance)+1×(lower extremity puncture)+1×(volume≥1 000 mL)+2×(corrosive agents).For the derivation cohort,AUC was 0.967(95%CI:0.936～0.998),specificity 0.911,sensitivity 0.935,with good calibration(χ2=4.135,P=0.845).Validation cohort showed AUC 0.939(0.853～1.000),specificity 0.919,sensitivity 0.941,and acceptable calibration(χ2=8.998,P=0.085).Conclusion This model demonstrates excellent discriminative ability and calibration,providing an effective tool for identifying high-risk patients and guiding targeted preventive strategies.

BACKGROUND:Currently,numerous experiments delve into the intricate anatomy and biomechanical behavior of distinct segments of the supraspinatus muscle.However,the impact of shoulder joint stress resulting from damage to various regions of this muscle remains a scarcely explored domain.Understanding the repercussions of supraspinatus muscle injuries across different regions on the stress distribution and magnitude of articular cartilage and the glenoid is crucial for providing some theoretical support for clinical diagnosis and treatment. OBJECTIVE:To ascertain the maximum stress values by simulating different degrees of supraspinatus muscle rupture on the humeral cartilage surface,glenoid lip,and glenoid cartilage joint surface using three-dimensional finite element software. METHODS:Normal and healthy shoulder joint CT or MRI scans were processed through Mimics and Geomagic to extract molds.Subsequently,models were constructed via Solidworks.Varying degrees of supraspinatus muscle damage were simulated for each model to mimic fractures in different regions.Finally,Ansys,mechanical software,was employed for three-dimensional finite element biomechanical analysis,calculating stress values for the humeral cartilage surface,glenoid lip,and glenoid cartilage joint surface. RESULTS AND CONCLUSION:(1)With worsening degrees of supraspinatus muscle injury,the stress on the shoulder joint cartilage surface and glenoid lip escalated.(2)Among various regions,the anterior part of the supraspinatus muscle exhibited paramount significance.(3)While supraspinatus muscle fractures of differing degrees impacted the magnitude of cartilage stress on the glenoid labial surface,the stress distribution remained constant.(4)It is indicated that during the initial stages of horizontal abduction of the shoulder joint,the anterior region assumes a pivotal role,followed by the posterior deep region.Injury to the anterior part of the supraspinatus muscle leads to a significant surge in stress within the shoulder joint's soft tissue,potentially causing damage to the top of the glenoid lip and the anterior part of the glenoid cartilage.

Obesity presents significant challenges in spinal surgery, including higher rates of perioperative complications, prolonged operative times, and delayed recovery. Traditional open spine surgery often exacerbates these risks, particularly in patients with obesity, because of extensive tissue dissection and larger incisions. Endoscopic spine surgery (ESS) has emerged as a promising minimally invasive alternative, offering advantages such as reduced tissue trauma, minimal blood loss, lower infection rates, and faster recovery. This systematic review and meta-analysis aimed to evaluate the safety, efficacy, and outcomes of ESS techniques, including fully endoscopic and biportal endoscopic lumbar discectomy and decompression, in patients with obesity and lumbar spine pathologies. A comprehensive literature search of the PubMed/Medline, Embase, and Scopus databases yielded 2,975 studies published between 2000 and 2024, of which 10 met the inclusion criteria. The meta-analysis revealed significant improvements in pain relief (Visual Analog Scale) and functional outcomes (Oswestry Disability Index), with comparable results between patients with and without obesity. Patients who are obese experienced longer operative times and have a slightly higher risk of symptom recurrence; however, ESS demonstrated lower rates of wound infections, shorter hospital stays, and faster recovery than traditional surgery. These findings position ESS as a viable and effective option for managing lumbar spine conditions in patients with obesity, addressing obesity-related surgical challenges while maintaining favorable clinical outcomes. However, limitations such as study heterogeneity and the lack of randomized controlled trials highlight the need for further high-quality research to refine ESS techniques and optimize patient care in this high-risk population.