ObjectiveTo establish a high-performance liquid chromatography（HPLC） for the quantitative analysis of multiple components in Gegen Qinlian tablets， and to comprehensively evaluate the quality of samples from different manufacturers by integrating chemical pattern recognition and technique for order preference by similarity to ideal solution（TOPSIS）， in order to provide a reference basis for quality evaluation and control of Gegen Qinlian tablets. MethodsHPLC was employed to determine the contents of 10 components in 28 batches of Gegen Qinlian tablets collected from 6 manufacturers， and taking the detection results as variables， SIMCA 14.1 and SPSS 26.0 were employed for cluster analysis（CA）， principal component analysis（PCA）， and orthogonal partial least squares-discriminant analysis（OPLS-DA） to identify key components affecting the quality. Then， TOPSIS analysis was employed to rank the quality of Gegen Qinlian tablets from the 6 manufacturers and establish a comprehensive quality evaluation method. ResultsA quantitative method for Gegen Qinlian tablets was established. After methodological validation， the method was found to be stable and reliable， and could be used for the quantitative analysis of this preparation. The contents of 3′-hydroxy puerarin， puerarin， 3′-methoxy puerarin， daidzein， coptisine hydrochloride， epiberberine， jatrorrhizine hydrochloride， berberine hydrochloride， palmatine hydrochloride and baicalin in 28 batches of samples were 3.58-7.35， 24.88-42.32， 4.20-9.36， 4.33-7.60， 2.52-6.44， 0.93-4.10， 0.58-3.05， 10.68-22.92， 0.82-4.82， 11.73-60.16 mg·g^-1， respectively. Among them， puerarin， berberine hydrochloride and baicalin all met the limit requirements for this preparation specified in the 2025 edition of the Pharmacopoeia of the People's Republic of China. CA and PCA clustered the 28 batches of samples into 5 categories， PCA extracted 2 principal components with a cumulative variance contribution rate of 90.588%， and OPLS-DA screened out 4 differential markers with variable importance in the projection（VIP） values>1.0， namely baicalin， 3′-hydroxy puerarin， coptisine hydrochloride and palmatine hydrochloride， which might be the main components affecting the quality of Gegen Qinlian tablets. TOPSIS analysis showed that the comprehensive score of each evaluation index（C_i） values of different manufacturers were different. Among them， the C_i of manufacturer B was ranked higher， indicating potentially superior quality， while the C_i of manufacturer A was ranked lower， suggesting potentially inferior quality. ConclusionThis study establishes a quantitative method for Gegen Qinlian tablets， and the content uniformity of the same manufacturer is good， while there are differences in the contents of active components among different manufacturers. Through the chemical pattern recognition analysis， it is found that the content differences of Gegen Qinlian tablets may be related to baicalin， 3′-hydroxy puerarin， coptisine hydrochloride and palmatine hydrochloride.

OBJECTIVE To establish a Chinese drug-related problem （DRP） classification system applicable to pharmacist-led pharmaceutical care in China， providing pharmacists with an effective and practical tool for pharmaceutical care. METHODS A multi-stage process was employed to construct the DRP classification system， including literature review and analysis， comparison of existing classification systems， refinement of classification items and framework development， two rounds of standard case validation， expert discussion， and system revision. The Fleiss′ kappa test was used to calculate the consistency coefficient κ， assessing the reliability of pharmacists participating in evaluating the classification system. An electronic questionnaire comprising six items was employed to evaluate the system’s applicability. RESULTS The constructed Chinese DRP classification system comprised six sections [problem（including potential problems）， DRP evaluation， cause （including possible causes of potential problems）， intervention， acceptance of intervention and DRP status]， with 24 primary codes and 96 secondary codes. In the first round of case validation， κ values exceeded 0.4 for all sections except “intervention” and “DRP status”. In the second round， κ values exceeded 0.4 for all sections. In the applicability evaluation of the classification system， positive ratings （“strongly agree” or “agree”） exceeded 85% for all items. Specifically， positive ratings for“the classification system can provide appropriate category selection”，“ the classification system is comprehensive”，“ the classification system is convenient to use” and “the classification system is highly satisfactory” exceeded 92%. CONCLUSIONS The Chinese DRP classification system developed demonstrates both high reliability and applicability， providing an effective and practical classification tool for pharmacists in China to conduct pharmaceutical care.

Prolonged standing work can lead to various lower limb health issues. Footwear, as a convenient and noninvasive intervention, plays a key role in foot protection. The purpose of this review was to evaluate the impact of footwear characteristics on foot comfort among workers engaged in prolonged standing occupations. A systematic search of PubMed, Web of Science, Scopus, and the Cochrane Library was conducted until March 2025 for experimental and observational studies; the review is registered in International Prospective Register of Systematic Reviews (CRD420251003253).Given the diversity of study designs, participant characteristics, and outcome measures, results were synthesized narratively, organizing findings by footwear design factors. The synthesis indicated that soft soles reduce foot impact and fatigue but offer limited support, whereas hard soles enhance stability but may cause localized pressure and discomfort. Sole hardness should balance cushioning and support based on activity: hard soles for standing and soft soles for walking. Insole hardness must be carefully considered as semirigid arch supports can cause discomfort. Most insoles improve pressure distribution by adjusting arch loading, and some enhance intrinsic foot muscles by promoting toe engagement, reducing leg swelling. Custom orthotic insoles outperform standard ones in comfort and balance. Future research should promote interdisciplinary collaboration with footwear designers to explore key design parameters and establish a scientific framework for protective footwear.

Clinical trials represent a pivotal stage in the development of pharmaceutical drugs. Nevertheless， given the unique characteristics of traditional Chinese medicine （TCM） and the diagnostic and treatment principle of syndrome differentiation and treatment in TCM， the clinical evaluation techniques and methods that can comprehensively reflect the characteristics of TCM and are tailored to its specificities are still in need of refinement and innovation. This paper systematically summarizes the key techniques and methods for designing and evaluating the clinical research on the treatment of the spleen and stomach diseases with TCM from three aspects including clinical research design， evaluation， and platform construction， compares domestic and international research landscapes， and proposes for future directions. It is suggested that a multidimensional evaluation system integrating modern medicine and TCM theory should be established， and further innovation is needed in TCM research design and methodologies， leveraging intelligent devices and technologies powered by next-generation information technology to transform clinical data into high-quality TCM evidence. Moreover， standardized and shared platforms for TCM clinical data should be accelerated， so as to provide references for the design， implementation， and evaluation of future clinical research on the treatment of the spleen and stomach diseases with TCM.

OBJECTIVE To establish a high-performance liquid chromatography（HPLC） fingerprint and a multi-component content determination method for Ziziphus jujuba stir-fried with Coptis chinensis juice， a characteristic processed product of Longsha Medical School， and to provide a basis for the inheritance and clinical application of this distinctive variety. METHODS HPLC method was employed to establish the fingerprints of 12 batches of Z. jujuba stir-fried with C. chinensis juice. Similarity evaluation and common peak identification were subsequently carried out. Quantitative determination was performed on coclaurine， magnoflorine， coptisine hydrochloride， epiberberine， jatrorrhizine hydrochloride， spinosin， berberine hydrochloride， palmatine hydrochloride， 6"'-feruloylspinosin， and jujuboside A of samples. RESULTS The fingerprint similarities of all 12 batches of samples were higher than 0.960. A total of 17 common peaks were calibrated， among which 9 peaks were identified as coclaurine， magnoflorine， coptisine hydrochloride， epiberberine， jatrorrhizine hydrochloride， spinosin， berberine hydrochloride， palmatine hydrochloride， and 6"'-feruloylspinosin， respectively. The quantitative results showed that the mass fractions of coclaurine， magnoflorine， coptisine hydrochloride， epiberberine， jatrorrhizine hydrochloride， spinosin， berberine hydrochloride， palmatine hydrochloride， 6"'-feruloylspinosin， and jujuboside A in the 12 batches of samples were 0.044-0.091， 0.908-1.698， 0.325-0.549， 0.163-0.287， 0.103-0.172， 0.712-0.952， 1.185-1.843， 0.341-0.598， 0.228-0.405， and 0.050-0.091 mg/g， respectively. CONCLUSIONS The established HPLC fingerprint and multi-component determination method is stable and reliable， and can provide a basis for the quality standard formulation and clinical application of Z. jujuba stir-fried with C. chinensis juice.

This study aimed to systematically construct a transitional curriculum for newly recruited surgical residents and to evaluate its preliminary application outcomes through pre and postimplementation assessments, so as to provide practical references for the design and dissemination of such curricula.

Objective The aim of the study is to analyze the incidence patterns and epidemiological characteristics of parasitic and vector-borne diseases in the Minhang and Jinshan districts of Shanghai, and provide evidence-based information for optimizing prevention and control measures. Methods We collected information from epidemic reports and epidemiological investigation forms for cases of parasitic and vector-borne diseases from 2005 to 2024 in Shanghai's Minhang and Jinshan districts. Descriptive epidemiological method were adopted to conduct a comparative analysis of incidence trends, epidemic characteristics, and infection sources. Results A total of 229 cases in 7 categories were reported between 2005 and 2024, with an average annual incidence rate of 0.36/100 000. The average annual incidence rate in Minhang District was significantly higher than that in Jinshan District. The most prevalent diseases were malaria and dengue fever, followed by Japanese encephalitis. Monthly case reports were available, predominantly from June to October, with a peak in July-August. A statistically significant difference was observed between the two districts in case distribution during June-October (P＜0.001), whereas no significant difference was found for July-August (P=0.331). The majority of cases were young men (111/229,48.47%), aged 20-39 years. Migrant workers/farmers constituted the largest occupational group (55/229, 24.02%). Registered residents of other provinces and cities (147/229,64.19%), and the main source of infection was overseas importation (112/229,48.91%). There were no statistically significant differences in gender and household-registration composition between the two districts (P＞0.05). Significant differences existed in age, occupation, and source of infection (P＜0.05). The imported diseases were malaria and dengue fever, with Africa and Southeast Asia being the primary source locations. Malaria was the predominant disease imported from other provinces and cities, with cases having been imported from abroad since 2012. Local infections were mainly Japanese encephalitis, followed by malaria (with the last local case reported in 2010). Cases between 2005 and 2009 were predominantly imported from other provinces and cities. The proportion of cases imported from abroad increased sharply after 2010, particularly in Minhang District. Local infections sometimes arise in Jinshan District, with Japanese encephalitis serving as the primary type. Conclusions Incidence rates of parasitic and vector-borne diseases in Minhang and Jinshan districts have generally remained low. To further reduce this disease burden, it will be necessary to strengthen joint measures for prevention and control, eliminate the environmental risk factors of vector organisms, enhance monitoring and precise control of the environment and inbound personnel to prevent the occurrence and transmission of parasitic and vector-borne diseases.

BACKGROUND: Generalized pustular psoriasis (GPP), a rare and recurrent autoinflammatory disease, imposes a substantial burden on patients and society. Awareness of GPP in China remains limited. METHODS: This cross-sectional survey, conducted between September 2021 and May 2023 across 14 hospitals in China, included GPP patients of all ages and disease phases. Data collected encompassed demographics, clinical characteristics, economic impact, disease severity, quality of life, and treatment-related complications. Risk factors for GPP recurrence were analyzed. RESULTS: Among 127 patients (female/male ratio = 1.35:1), the mean age of disease onset was 25 years (1st quartile [Q1]-3rd quartile [Q3]: 11-44 years); 29.2% had experienced GPP for more than 10 years. Recurrence occurred in 75.6% of patients, and nearly half reported no identifiable triggers. Younger age at disease onset ( P  = 0.021) and transitioning to plaque psoriasis ( P  = 0.022) were associated with higher recurrence rates. The median diagnostic delay was 8 months (Q1-Q3: 2-41 months), and 32.3% of patients reported misdiagnoses. Comorbidities were present in 53.5% of patients, whereas 51.1% experienced systemic complications during treatment. Depression and anxiety affected 84.5% and 95.6% of patients, respectively. During GPP flares, the median Dermatology Life Quality Index score was 19.0 (Q1-Q3: 13.0-23.5). This score showed significant differences between patients with and without systemic symptoms; it demonstrated correlations with both depression and anxiety scores. Treatment costs caused financial hardship in 55.9% of patients, underscoring the burden associated with GPP. CONCLUSIONS The substantial disease and economic burdens among Chinese GPP patients warrant increased attention. Patients with early onset disease and those transitioning to plaque psoriasis require targeted interventions to mitigate the high recurrence risk.
Humans ; Male ; Female ; Psoriasis/pathology* ; Adult ; Cross-Sectional Studies ; Adolescent ; Child ; Young Adult ; Quality of Life ; Middle Aged ; China/epidemiology* ; Recurrence ; Risk Factors ; Surveys and Questionnaires ; East Asian People

Traditional Chinese medicine(TCM) solid waste is characterized by widespread availability, renewability, and substantial production volume. In the context of the "dual carbon" goals, the pyrolysis of TCM solid waste for producing fuel gas for recycling in pharmaceutical production has emerged as a crucial strategy for optimizing the energy structure in the TCM industry and developing renewable energy. This paper comprehensively reviews both internal and external factors that influence the pyrolysis of TCM solid waste. Internal factors encompass moisture content, particle size, ash content, and the morphology of the raw materials, while external factors include pyrolysis conditions, equivalence ratios, types of gasifiers, and gasifying agents. Furthermore, this paper details the challenges associated with the pyrolysis of TCM solid waste, such as the dispersion of feedstocks, the diversity of resources, the complexity of the pyrolysis process, and the variations in gasifier performance. Finally, this paper proposes measures to address these challenges. This paper aims to provide insights into the development of a circular economy for TCM resources and the advancement of low-carbon energy utilization in the TCM industry.
Pyrolysis ; Carbon/chemistry* ; Medicine, Chinese Traditional ; Solid Waste/analysis* ; Drugs, Chinese Herbal/chemistry* ; Gases/chemistry*