OBJECTIVE: To explore the genetic variants and phenotypic characteristics of patients with Neurofibromatosis type I (NF1). METHODS: Twenty two NF1 patients who presented at Enze Medical (Center) Group in Taizhou between 2018 and 2024 were selected as the study subjects. Clinical phenotype and family history were collected for the patients. Whole exome sequencing (WES) was carried out for the 22 probands to screen the variants of NF1 gene. Candidate variants were verified by Sanger sequencing of their family members. This study was approved by the Medical Ethics Committee of the Hospital (Ethics No.: K20230902). RESULTS: The 22 probands were diagnosed between the age of 5 months to 47 years old, and have all shown cafe au lait spots on their skin. Seventeen patients exhibited the phenotype at birth, and 11 had various degrees of neurofibromatosis. Among them, probands 1 and 13 underwent surgical resection of the tumor but had recurred, while proband 12 had amputation due to the huge size and serious impact of the neurofibroma and had no recurrence. Five patients had various degrees of scoliosis. In total 22 germline mutations and one somatic mutation were identified among the 22 families, with 5 variants unreported previously, including 1 nonsense mutation c.1603C>T (Q535*), 3 frameshift mutations [c.7268_7269delCA (Thr2423fs), c.2293del (Arg765Alafs*26), and c.5433_5438delinsGC (Phe1812ArgfsTer50)], and 1 deletion involving exons 41-44 of the NF1 gene and adjacent introns. Proband 13 was found to harbor germline mutation c.6796C>T (Gln2266Ter) and somatic mutation c.1019_1020del (Ser340Cysfs Ter12) in the peripheral blood and tumor tissue, respectively. Among the 22 NF1 probands, 6 had received treatment due to severe illness. Proband 1 had tumor resection in the right upper limb, but was found to have malignant lung tumor and died during follow-up. Proband 12 had multiple recurrence of neurofibroma in the left ring finger. Proband 4 underwent spinal correction surgery due to severe scoliosis. Proband 11 had died due to a central nervous system disease. Among the 22 germline mutations, 6 had led to the occurrence of truncated proteins, which may have a more severe impact on the phenotype. CONCLUSION This study investigated the genetic variants and clinical phenotypes of 22 NF1 families and identified 5 novel variants of the NF1 gene, which has expanded the genotypic and phenotypic spectra of the NF1. Preliminary studies have identified an association between truncated mutations, young age, and severe phenotypes, which may provide important clues for prognosis evaluation. For the clinical diagnosis and treatment of NF1, it is necessary to consider the phenotypic characteristics and genetic testing in combination with genetic counseling and long-term follow-up.
Humans ; Neurofibromatosis 1/pathology* ; Male ; Female ; Pedigree ; Adult ; Child ; Child, Preschool ; Middle Aged ; Adolescent ; Infant ; Young Adult ; Neurofibromin 1/genetics* ; Phenotype ; Asian People/genetics* ; Mutation ; Exome Sequencing ; East Asian People

Objective: To investigate the prevalence of overweight and obesity among children and adolescents in Yangzhou City, and its association with screen behaviors, so as to provide scientific evidence for weight management among students. Methods: In May 2025, an electronic questionnaire survey was conducted among children and adolescents in Yangzhou City. A total of 3 722 participants were selected from grades 4 to 12 in 18 primary and secondary schools (108 classes) by using stratified cluster random sampling. The Chi square test was used to compare the differences in the detection rates of overweight and obesity among children and adolescents with 5 types of screen behaviors (watching TV, playing electronic games, scrolling short videos, screen based learning, electronic socializing) in different time groups each day (never, >0~<2 h, ≥2 h). Multivariate Logistic regression analysis was performed to examine the associations of five types of screen behaviors, presence of electronic devices in the bedroom, and screen use during meals on the weight status of children and adolescents. Results: The prevalence of overweight and obesity among children and adolescents was 37.3%. For all five types of screen behaviors, the differences in the distribution of overweight and obesity detection rates among children and adolescents across the three time spent categories were statistically significant ( χ 2=30.76- 70.78 , all P <0.01). After adjusting for confounding factors, multivariate Logistic regression analysis revealed that frequent or always using screens during meals( OR =1.63, 95％ CI =1.14~2.31), playing video games ( OR =1.28, 95% CI =1.11-1.48), browsing short videos ( OR =1.29, 95％ CI=1.09-1.54), and screen based learning ( OR =1.26, 95％ CI =1.10-1.44) were significantly associated with overweight and obesity among children and adolescents (all P <0.05). Conclusions Excessive screen use is positively correlated with the incidence of overweight and obesity in children and adolescents. Targeted interventions on screen behaviors among children and adolescents are therefore warranted.

BACKGROUND:Abutment screw loosening is one of the most common mechanical complications in implant restoration.Mechanical wear,as a potential cause of thread loosening,warrants attention due to its impact on mechanical performance and long-term stability.However,studies on the mechanical effects of thread wear in abutment screws remain limited,and no definitive conclusions have been reached.OBJECTIVE:To investigate the effect of different degrees of mechanical wear on the spatial stress distribution of the Morse taper connection implant system,with a view to providing a theoretical basis for the clinical assessment of the long-term stability of dental implants.METHODS:Three-dimensional finite element models of Morse taper implants with central screw thread wear levels of 0,0.1,1,10,and 100 μm were established using SolidWorks software,and simulation analysis with Ansys Workbench software was performed.The implant models were inserted into artificial bone blocks(simulating type Ⅱ bone,with a cortical bone thickness of 2 mm on the outer layer and cancellous bone inside).An alternating load of 300 N in the buccolingual direction was applied at the centroid of the abutment(forming an angle of 30° with the long axis of the implant).The von Mises stress,principal stress,displacement,and fatigue life of the abutment,central screw,implant,and bone tissue in the five groups of models were analyzed.RESULTS AND CONCLUSION:(1)As the degree of mechanical wear on the central screw thread increased,the von Mises stress,principal stress,and strain in the implant and abutment also increased.The stress in the model was concentrated at the top of the implant,at the shoulder level of the implant,at the neck of the abutment,and at the bottom edge of the abutment.(2)Under moderate wear conditions(≥ 10 μm),the fatigue life of the implant system decreased by 30％,and the maximum von Mises stress of the central screw decreased by 37％,with the stress still primarily concentrated at the transition area between the head and the body of the central screw.(3)Under significant wear conditions(≥ 100 μm),the von Mises stress of the central screw decreased by 98％,with the stress concentrated at the screw head,and the fatigue life of the implant system decreased by 63％.Therefore,when the wear level of the central screw thread reaches ≥ 10 μm,the risk of screw loosening is significantly increased,and the fatigue life of the implant system is markedly reduced,warranting clinical attention.

Objective: To explore the association between meat consumption and anxiety symptoms in first year junior high school students in Yunnan Province, and to provide theoretical support for preventing and relieving anxiety symptoms in junior high school students. Methods: From October to December 2022, a random cluster sampling method was used to select 8 500 first year junior high school students from 11 counties in Yunnan Province as the survey subjects for a questionnaire survey. The study used Food Frequency Questionnaire and the Chinese version of the Depression Anxiety Stress Scale-21 (DASS-21) to assess the meat consumption and anxiety symptoms of junior high school students.The distribution differences in anxiety symptoms among first year junior high school students with different demographic characteristics were analyzed statistically by using the Chi-square test,and the association between meat consumption and anxiety symptoms in students was analyzed by using a generalized linear model. Results: The detection rate of anxiety symptoms was 48.47%. After controlling for demographic variables and confounding factors, the consumption of livestock meat, poultry meat, processed meat, cured meat, barbecued meat and raw skin meat was statistically significant with anxiety symptoms ( β =-0.05, 0.04, 0.04, 0.08, 0.14, 0.17, all P <0.05). Stratified by ethnicity, The consumption of livestock meat, cured meat and barbecue was statistically correlated with anxiety symptoms in Han adolescents ( β =-0.07, 0.14, 0.22 ); the consumption of processed meat and raw skin meat was statistically correlated with anxiety symptoms in ethnic minority adolescents ( β =0.08, 0.18) (all P <0.05). Conclusions There is a statistical association between meat comsumption and the risk of anxiety symptoms in first year junior high school students in Yunnan Province. Guidance on meat consumption should be strengthened to prevent the occurrence of anxiety symptoms.

This paper has constructed a traditional Chinese medicine （TCM） specialized disease dataset platform for mixed hemorrhoids based on a multimodal large model， and the preliminary application has been validated. The platform uses StarRocks to establish a four-level data warehouse system， enabling the aggregation， cleaning， and standardization of multi-source heterogeneous data. Using DeepSeek-R1-Distill-Qwen-7B as the base model， domain fine-tuning is performed through low-rank adaptation （LoRA） technology. Combined with LLaMA-3.3 natural language processing and reasoning chain techniques， the platform enables intelligent parsing and structured extraction of unstructured TCM medical records. It accurately identifies six major categories and 28 subcategories of entities， including symptoms and syndromes， with a fine-tuned model F1 score of 93.8%. The platform has established a high-quality specialized disease dataset containing more than 50,000 medical records and has been applied in a real-world study involving 17,831 patients， preliminarily verifying the efficacy of TCM heritage surgery.

BACKGROUND:Abutment screw loosening is one of the most common mechanical complications in implant restoration.Mechanical wear,as a potential cause of thread loosening,warrants attention due to its impact on mechanical performance and long-term stability.However,studies on the mechanical effects of thread wear in abutment screws remain limited,and no definitive conclusions have been reached.OBJECTIVE:To investigate the effect of different degrees of mechanical wear on the spatial stress distribution of the Morse taper connection implant system,with a view to providing a theoretical basis for the clinical assessment of the long-term stability of dental implants.METHODS:Three-dimensional finite element models of Morse taper implants with central screw thread wear levels of 0,0.1,1,10,and 100 μm were established using SolidWorks software,and simulation analysis with Ansys Workbench software was performed.The implant models were inserted into artificial bone blocks(simulating type Ⅱ bone,with a cortical bone thickness of 2 mm on the outer layer and cancellous bone inside).An alternating load of 300 N in the buccolingual direction was applied at the centroid of the abutment(forming an angle of 30° with the long axis of the implant).The von Mises stress,principal stress,displacement,and fatigue life of the abutment,central screw,implant,and bone tissue in the five groups of models were analyzed.RESULTS AND CONCLUSION:(1)As the degree of mechanical wear on the central screw thread increased,the von Mises stress,principal stress,and strain in the implant and abutment also increased.The stress in the model was concentrated at the top of the implant,at the shoulder level of the implant,at the neck of the abutment,and at the bottom edge of the abutment.(2)Under moderate wear conditions(≥ 10 μm),the fatigue life of the implant system decreased by 30％,and the maximum von Mises stress of the central screw decreased by 37％,with the stress still primarily concentrated at the transition area between the head and the body of the central screw.(3)Under significant wear conditions(≥ 100 μm),the von Mises stress of the central screw decreased by 98％,with the stress concentrated at the screw head,and the fatigue life of the implant system decreased by 63％.Therefore,when the wear level of the central screw thread reaches ≥ 10 μm,the risk of screw loosening is significantly increased,and the fatigue life of the implant system is markedly reduced,warranting clinical attention.

Objective:To evaluate the efficacy of digitally assisted design of surgical template for fibular composite tissue flap in reconstruction of segmental mandibular defect with soft tissue defect.Methods:A retrospective analysis was conducted on 30 patients who were treated at the Department of Otolaryngology Head and Neck Surgery, the 920th Hospital of the Joint Logistics Support Force of Chinese PLA from July 2020 to May 2024 for segmental mandibular defects combined with soft tissue defect. The cohort comprised 19 males and 11 females and aged 11-71 years (44.33 years±15.31 years). Pathological diagnoses of the patients were ameloblastoma (14 cases), squamous cell carcinoma (9 cases), osteomyelitis (4 cases), and odontogenic keratocyst (3 cases). Primary reconstructive surgery were performed on 21 patients after surgical resection of lesions, and 9 patients received secondary reconstructive surgery. The length of mandibular defect ranged from 75.83 mm to 111.45 mm (87.31 mm±12.00 mm), and soft tissue defects were measured at 5.0 cm×1.8 cm to 8.6 cm×2.1 cm (mean area 13.63 cm 2±2.42 cm 2). Preoperative CTA was performed to locate the perforator of peroneal artery and for design of digital surgical template. Intraoperatively, a modified fibula composite tissue flap harvesting technique was employed and that involved in: CTA-guided perforator planning, fibula osteotomy, anterior intermuscular septum exposure for identifying the peroneal artery, and a digital template-assisted fibula crafting for reconstruction of mandibule and soft tissue defect. Postoperative follow-ups were conducted at 1, 3, and 6 months, followed by quarterly reviews at outpatient clinic or via telephone interviews. Statistical analysis was performed using SPSS 27.0 software with descriptive statistical methods. Results:After surgery, all the fibula composite tissue flaps were viable and the incision wound healed well. Two patients had partial necroses at distal edge of the flaps, and they were healed after treatment. One patient had donor site infection and healed after anti-infective treatment. One month after the surgery, patients were assessed according to the recovery of face, mouth opening and occlusion, of which 25 patients (83.3%) were rated of Grade I, 4 (13.3%) of Grade Ⅱ, and 1 (3.4%) of Grade Ⅳ, with an excellent and good rates of 96.6%. The average distance of condylar movement on the affected side was 1.28 mm±0.35 mm. Postoperative follow-up lasted for 10 to 22 months, with 19.17 months±2.14 months in average. Assessment at the final follow-up was found that a total of 26 patients (86.8%) were of Grade I, 3 (10.0%) of Grade Ⅱ, and 1 (3.3%) of Grade Ⅳ and all the transferred fibula showed good alignment with the mandible over the postoperative follow-up period.Conclusion:Digital template-assisted design of fibular composite tissue flap enables a precise vascular protection, individualised osteotomy and functional restoration in reconstruction of segmental mandibular defect with soft tissue defect. It demonstrates a high clinical feasibility.

Objective:To investigate the association between blood selenium levels and sex hormones in Chinese men aged 18-79 years.Methods:Data were derived from the China National Human Biomonitoring survey conducted in 2017-2018, with a final sample size of 5 414 men. General demographic characteristics, behavioral habits, and dietary frequency were collected through questionnaires and physical examinations. Fasting blood samples were collected to measure blood lead, serum testosterone, and estradiol levels. Complex sampling linear regression models were used to analyze the associations between blood selenium levels and testosterone, estradiol, and the testosterone/estradiol ratio, adjusting for confounding factors including age, education level, marital status, smoking status, alcohol consumption, seafood intake, soy product intake, protein supplement intake, BMI, and diabetes status.Results:The mean age of the 5 414 participants was (46.85±27.91) years; 4 774 (91.65%) were of Han ethnicity and 4 505 (86.68%) were married. The median ( Q1, Q3) blood selenium concentration in men was 97.80 (80.64, 116.99) μg/L. After adjusting for confounding factors, the complex sampling linear regression model revealed negative associations between blood selenium levels and both testosterone levels and the testosterone/estradiol ratio, with a significant linear trend ( Ptrend<0.05). Compared with the Q1 group, the β (95% CI) values for testosterone in the Q2, Q3, and Q4 groups were -0.02 (-0.06 to 0.02), -0.03 (-0.08 to 0.01), and -0.06 (-0.09 to -0.02), respectively. Similarly, the β (95% CI) values for the testosterone/estradiol ratio in the Q2, Q3, and Q4 groups were -0.01 (-0.03 to 0.02), -0.01 (-0.04 to 0.04), and -0.03 (-0.06 to -0.01), respectively. Subgroup analysis indicated stronger associations between blood selenium levels and testosterone/estradiol levels in non-smoking and obese men (BMI≥28 kg/m2). Conclusion:Blood selenium levels are negatively associated with testosterone levels and the testosterone/estradiol ratio in Chinese adult males.

Objective:To summarize the theoretical basis and practical experience of the hospital where the author works, in actively promoting the interdisciplinary integration of ″Medicine+ ″, and provide reference for hospitals of the same type.Methods:Based on the Resource-Based View framework, this study analyzed the core dimension heterogeneous resources including organizational capital, physical and financial capital, and human capital through a case study of Zhongnan Hospital of Wuhan University, systematically examining its interdisciplinary research promotion strategies.Results:The hospital had created a strong interdisciplinary atmosphere. Its scientific research and innovation capabilities had been significantly enhanced. High-quality interdisciplinary academic achievements had emerged continuously. And its academic influence has continued to expand.Conclusions:Interdisciplinary integration is a systematic project that requires organized implementation and a ″multi-pronged approach″: coordinating and innovating the organizational management system, conducting comprehensive resource inventorying and ensuring sustainable provision, making overall plans for talent introduction and cultivation, and adhering to the clinical-problem-oriented approach in carrying out interdisciplinary integration.

OBJECTIVE To investigate the distribution of Candida and predict the detection trend in the southern and northern campuses of Affiliated Hospital of Jiangnan University,Wuxi,between 2021 and 2024.METHODS A total of 27 056 patients with common Candida infections from the southern and northern campuses of Affiliated Hospital of Jiangnan University between 2021 and 2024 were selected to analyze the distribution of Candida species and predict the detection trend.RESULTS Among the 27 056 patients,there were 11 061 males and 15 995 fe-males,aged from 1 to 101 years,with a median age of 68 years.Over the past four years,the top five most com-monly detected Candida species in the hospital were Candida albicans,Candida glabrata,Candida tropicalis,Candida parapsilosis and Candida krusei.Statistically significant differences were found in infection characteris-tics among patients with C.albicans and C.glabrata in terms of gender,age,specimen source and related diseases(P＜0.05).From 2021 to 2024,the number of detected cases declined in 2022 and then rebounded(P＜0.001).Among the detected patients,those aged 70 and above accounted for the highest proportion.Regarding the distribution of specific diseases,the top three were vaginitis(4 176 cases,15.43％),bacterial pneumonia(1 842 cases,6.81％)and cancer(1 279 cases,4.73％).Patients with vaginitis were mainly infected with C.albicans,while patients with bacterial pneumonia were predominantly infected with C.albicans and C.glabrata.The LSTM model showed a good fit to the training set,with an root-mean-square error(RMSE)of 145.03 and an mean absolute error(MAE)of 131.19.Model predictions indicated that the number of patients with Candida in-fections in the hospital would remain low from Jan.to May 2025,which was basically consistent with actual clini-cal observations(RMSE=94.71,MAE=84.00).CONCLUSIONS The common diseases associated with Candi-da infections in the hospital include vaginitis,bacterial pneumonia and cancer.C.albicans and C.glabrata are the main pathogenic species,and the infection situation is relatively severe.The LSTM model performs well in short-term prediction and dynamic analysis of Candida detection trends.