1.The clinical application of fractional flow reserve and Doppler flow velocity derived from optical coherence tomography in coronary artery disease
Lei ZHAO ; Longbo LI ; Bin LIU ; Zhihui WANG ; Jinpeng WANG ; Bo LI ; Zewei XU
Chinese Journal of Cardiology 2025;53(7):799-805
Objective:To explore the diagnostic value of fractional flow reserve (FFR) based on optical coherence tomography (OCT) for coronary functional ischemia, and to investigate the feasibility of synchronously obtaining Doppler blood flow velocity information with the help of OCT technology.Methods:This study was a single-center, prospective, self-controlled clinical study on coronary heart disease patients who underwent OCT and FFR assessment at Department of Cardiology, the Second Hospital of Jilin University from January 2024 to February 2025. Linear regression analysis was used to evaluate the correlation and consistency between OCT-FFR and FFR. With FFR≤0.80 as the gold standard for judging whether the target vessel was ischemic, the diagnostic performance of OCT-FFR was evaluated, and the diagnostic value of OCT-FFR for significant coronary artery ischemia was assessed using subject operating characteristic curves. Blood flow OCT data were analyzed by Doppler processing algorithm to obtain information on coronary blood flow velocity.Results:A total of 31 vessels from 28 patients were analyzed, the correlation coefficient r between OCT-FFR and FFR of the 31 vessels was 0.84 ( P<0.001). With FFR as the gold standard to determine whether a coronary artery is ischemic, accuracy, sensitivity, specificity, positive predictive value, and negative predictive value for OCT-FFR was 93.55%, 75.00%, 100.00%, 1.00, 0.92. In clinical practice, Doppler OCT was used for the first time to obtain information on coronary blood flow velocity. Conclusion:OCT-FFR had an excellent correlation and consistency with FFR in judging whether there is coronary artery ischemia. The feasibility of the simultaneous acquisition of OCT-FFR and Doppler flow velocity information in coronary stenosis was preliminarily verified.
2.Poster Fusion Cage combined with xenogeneic bone graft augmentation for bone defect management in distal radius fractures.
Yi GAO ; Xiaomeng REN ; Chuyang ZENG ; Longbo DU ; Meng LI ; Rui MA ; Wei ZHANG
Chinese Journal of Reparative and Reconstructive Surgery 2025;39(6):655-661
OBJECTIVE:
To evaluate the effectiveness of Poster Fusion Cage combined with xenogeneic bone graft augmentation for bone defect management in distal radius fractures.
METHODS:
A retrospective analysis was conducted on 20 patients with bone defects complicating distal radius fractures who met the selection criteria and were treated between June 2022 and June 2024. The cohort comprised 2 males and 18 females, aged 54-87 years (mean, 63.3 years). Etiologies included falls in 17 cases, traffic accidents in 2 cases, and crush injury in 1 case. According to AO classification, there were 5 cases of type A, 8 cases of type B, and 7 cases of type C. The interval from injury to operation ranged from 2 to 10 days (mean, 5.8 days). All patients underwent volar plate fixation augmented with Poster Fusion Cage and demineralized xenogeneic bone matrix grafting. The operation time, intraoperative blood loss, fracture healing time, and postoperative complications were recorded. Radiographic parameters, including radial height, volar tilt, and ulnar deviation, were measured on standardized X-ray films obtained immediately postoperatively and at last follow-up, and whether secondary reduction loss occurred was judged. At last follow-up, wrist range of motion (extension, flexion, radial deviation, ulnar deviation, pronation, and supination) and grip strength (expressed as a percentage of the contralateral side) were measured. Wrist function was assessed using the Disabilities of the Arm, Shoulder, and Hand (DASH) score and Patient-Rated Wrist Evaluation (PRWE) score.
RESULTS:
The operation time was 70-200 minutes (mean, 116.4 minutes), and the intraoperative blood loss was 10-80 mL (mean, 36.5 mL). All surgical incisions healed by first intention, with no neurovascular complications documented. All patients were followed up 9-12 months (mean, 11.6 months). All fractures healed normally, with a healing time of 8-14 weeks (mean, 9.95 weeks). No significant difference was observed in radial height, volar tilt, or ulnar deviation between immediate postoperatively and last follow-up ( P>0.05). All fractures achieved satisfactory reduction, with no secondary loss of reduction or implant failure occurring during follow-up. At last follow-up, the range of motion of the affected wrist joint was 60°-65° (mean, 62.5°) in extension, 67°-75° (mean, 71.1°) in flexion, 18°-23° (mean, 20.4°) in radial deviation, 28°-33° (mean, 30.1°) in ulnar deviation, 69°-80° (mean, 74.7°) in pronation, and 69°-82° (mean, 75.6°) in supination. Grip strength recovered to 75%-85% (mean, 80%) of the contralateral side. Functional scores showed a DASH score of 5-15 (mean, 9.4) and PRWE score of 8.0-12.5 (mean, 10.2).
CONCLUSION
The combination of Poster Fusion Cage and xenogeneic bone graft augmentation provides a safe and effective treatment for bone defects in distal radius fractures.
Retrospective Studies
;
Humans
;
Male
;
Female
;
Middle Aged
;
Aged
;
Aged, 80 and over
;
Treatment Outcome
;
Wrist Fractures/surgery*
;
Heterografts
;
Transplantation, Heterologous/methods*
;
Bone Transplantation/methods*
;
Operative Time
;
Blood Loss, Surgical
;
Radius/surgery*
;
Fracture Healing
;
Time Factors
;
Postoperative Complications/etiology*
;
Range of Motion, Articular
;
Follow-Up Studies
;
Internal Fixators
;
Fracture Fixation, Internal/methods*
;
Combined Modality Therapy
3.The clinical application of fractional flow reserve and Doppler flow velocity derived from optical coherence tomography in coronary artery disease
Lei ZHAO ; Longbo LI ; Bin LIU ; Zhihui WANG ; Jinpeng WANG ; Bo LI ; Zewei XU
Chinese Journal of Cardiology 2025;53(7):799-805
Objective:To explore the diagnostic value of fractional flow reserve (FFR) based on optical coherence tomography (OCT) for coronary functional ischemia, and to investigate the feasibility of synchronously obtaining Doppler blood flow velocity information with the help of OCT technology.Methods:This study was a single-center, prospective, self-controlled clinical study on coronary heart disease patients who underwent OCT and FFR assessment at Department of Cardiology, the Second Hospital of Jilin University from January 2024 to February 2025. Linear regression analysis was used to evaluate the correlation and consistency between OCT-FFR and FFR. With FFR≤0.80 as the gold standard for judging whether the target vessel was ischemic, the diagnostic performance of OCT-FFR was evaluated, and the diagnostic value of OCT-FFR for significant coronary artery ischemia was assessed using subject operating characteristic curves. Blood flow OCT data were analyzed by Doppler processing algorithm to obtain information on coronary blood flow velocity.Results:A total of 31 vessels from 28 patients were analyzed, the correlation coefficient r between OCT-FFR and FFR of the 31 vessels was 0.84 ( P<0.001). With FFR as the gold standard to determine whether a coronary artery is ischemic, accuracy, sensitivity, specificity, positive predictive value, and negative predictive value for OCT-FFR was 93.55%, 75.00%, 100.00%, 1.00, 0.92. In clinical practice, Doppler OCT was used for the first time to obtain information on coronary blood flow velocity. Conclusion:OCT-FFR had an excellent correlation and consistency with FFR in judging whether there is coronary artery ischemia. The feasibility of the simultaneous acquisition of OCT-FFR and Doppler flow velocity information in coronary stenosis was preliminarily verified.
4.Effect of pretreatment by solid-state fermentation of sawdust on the pelletization and pellet's properties.
Jingjing GUO ; Xingzhong YUAN ; Hui LI ; Changzhu LI ; Zhihong XIAO ; Zhihua XIAO ; Longbo JIANG ; Guangming ZENG
Chinese Journal of Biotechnology 2015;31(10):1449-1458
We pretreated sawdust (Castanopsis fissa Rehd.et Wils) by solid state fermentation (SSF) with Phanerochaete chrysosporium, and then compressed it into pellets with the moisture content of 15% and the pressure of 98 MPa, to solve the problem of low density, low Meyer hardness, high water uptake, and short storage period of pellet in the woody pellet industry. We studied the effects of fermentation time on pelletization and pellets's characteristics (including energy consumption, density, Meyer hardness, and hydrophobicity). SSF affected the heating values of pellet. Compared with fresh sawdust, SSF consumed more energy at the maximal value by 6.98% but saved extrusion energy by 32.19% at the maximum. Meanwhile, SSF could improve the density, Meyer hardness and hydrophobicity of pellet. Pellet made of sawdust pretreated by SSF for 48 d had best quality, beneficial for long-term transportation and storage of pellets.
Biofuels
;
Fermentation
;
Hydrophobic and Hydrophilic Interactions
;
Phanerochaete
;
Water
;
Wood

Result Analysis
Print
Save
E-mail