Objective To perform on-site calibration of high-pressure ionization chambers and NaI(Tl) γ spectrometers in state-controlled atmospheric radiation environment automatic continuous monitoring stations and verify the reliability of the online radiation environment monitoring system. Methods ¹³⁷Cs, ⁶⁰Co, and ²⁴¹Am were used as γ reference radiation sources to measure the metrological performance of high-pressure ionization chambers in nine state-controlled atmospheric radiation environment automatic monitoring stations in Hubei Province, China. The performance metrics included background radiation, response, and repeatability. Additionally, the correlation between dose rate and humidity was analyzed, and the energy resolution and activity response of NaI(Tl) γ spectrometers were measured. Results Among the nine state-controlled atmospheric radiation environment automatic monitoring stations, the background radiation of high-pressure ionization chambers ranged from 58.2 nGy/h to 82.6 nGy/h. The response of the high-pressure ionization chambers ranged from 0.94 to 1.08, fulfilling the requirement of 1.0 ± 0.2. The repeatability of high-pressure ionization chambers ranged from 0.43% to 3.80%, satisfying the requirement of not exceeding 10%. A significant correlation was observed between dose rate and humidity, with a correlation coefficient of 0.4476. For NaI(Tl) γ spectrometers, the energy resolution ranged from 6.8% to 7.9%, fulfilling the requirement of not exceeding 9% for the 661.7 keV energy peak of ¹³⁷Cs. The NaI(Tl) γ spectrometers showed 1.4% to 1.8% s⁻¹·Bq⁻¹ activity response to ²⁴¹Am and 6.6‰ to 8.4‰ s⁻¹·Bq⁻¹ activity response to ⁶⁰Co. Conclusion The online monitoring systems in the nine state-controlled atmospheric radiation environment automatic monitoring stations are stable and reliable, providing accurate radiation environment monitoring data for public awareness.

In current clinical practice, various dermal templates and skin substitutes are used to enhance wound healing. However, the role of wound commensal microbiome in regulating scaffold performance and the healing process remains unclear. In this study, we investigated the influence of both natural and synthetic scaffolds on the wound commensal microbiome and wound repair in three distinct models including diabetic wounds, burn injuries, and germ-free (GF) wounds. Remarkably, synthetic electrospun polycaprolactone (PCL) scaffolds were observed to positively promote microbiome diversity, leading to enhanced diabetic wound healing compared to the natural scaffolds Integra® (INT) and MatriDerm® (MAD). In contrast, both natural and synthetic scaffolds exhibited comparable effects on the diversity of the microbiome and the healing of burn injuries. In GF wounds with no detectable microorganisms, a reversed healing rate was noted showing natural scaffold (MAD) accelerated wound repair compared to the open or the synthetic scaffold (PCL) treatment. Furthermore, the response of the wound commensal microbiome to PCL scaffolds appears pivotal in promoting anti-inflammatory factors during diabetic wound healing. Our results emphasize that the wound commensal microbiome, mediated by different scaffolds plays an important role in the wound healing process.

Objective To assess the clinical effectiveness of Poly(p-dioxanone)(PPDO)bidirectional sawtooth inverted Ⅴ-shaped wiring and straight wiring in ameliorating nasolabial fold wrinkles within the context of facial rejuvenation.Methods Between March 2023 and January 2024,60 patients presenting with nasolabial fold wrinkles who underwent PPDO subcutaneous implantation and lifting in the Department of Plastic Surgery at the First Affiliated Hospital of Bengbu Medical University were randomly allocated into an observation group and a control group.At 4 weeks,12 weeks,and 24 weeks post-surgery,the clinical efficacy was statistically analyzed.The incidence of complications was documented to evaluate the safety of the procedure,and a satisfaction survey was carried out.Results In each time period,the Wrinkle Severity Rating Scale(WSRS)scores of both groups decreased significantly when compared to those prior to the operation(P<0.05).At each corresponding time point after surgery,there was a statistically significant difference in the WSRS scores between the two groups in the observation group(P<0.05).In both groups,the WSRS score was the lowest at 12 weeks post-surgery,and the score at 24 weeks post-surgery was significantly higher than that at 12 weeks post-surgery(P<0.05).The overall effective rate of facial improvement in the observation group was 93.33%,which was significantly higher than that in the control group(73.33%).The difference was statistically significant(χ2=4.320,P<0.05).No obvious complications occurred in either group.The satisfaction rate in the observation group was 4.067±0.828,which was significantly higher than that in the control group(3.400±0.932).The difference was statistically significant(t=2.929,P<0.05).Conclusions Both the PPDO two-way sawtooth line inverted Ⅴ-shaped wiring method and the straight wiring method can effectively improve nasolabial fold wrinkles.Compared with the straight wiring method,the inverted Ⅴ wiring method demonstrates a more pronounced improvement effect,higher subject satisfaction,and fewer consumables.The optimal results were achieved at 12 weeks after surgery for both wiring methods.Moreover,neither surgical procedure was associated with significant complications.

BACKGROUND:The development of calcium phosphate bone cement is limited due to its poor mechanical properties and weak osteogenic ability.Silicate bioactive glass is highly favored due to its excellent biological activity and osteogenic ability.Simultaneously,fiber structures can enhance the mechanical strength of materials.OBJECTIVE:To investigate the mechanical properties,biocompatibility,and osteogenic effect of silicate bioactive glass fiber composite calcium phosphate bone cement.METHODS:Different mass percentages(0％,10％,and 20％)of silicate bioactive glass fiber were added to the solid phase of calcium phosphate bone cement,mixed with the liquid phase and cured for 48 hours to obtain silicate bioactive glass fiber composite calcium phosphate bone cement.The mechanical properties,setting time,and ion precipitation of the cement were characterized.The three groups of bone cement extracts were co-cultured with MC3T3-E1 cells.The cell compatibility of the materials was evaluated by CCK-8 assay,live/dead staining,and phalloidin staining.After osteogenic induction,the osteogenic induction ability of the materials was evaluated by alkaline phosphatase staining,alizarin red staining,RUNX2 immunofluorescence staining,and RT-PCR.RESULTS AND CONCLUSION:(1)With the increase of silicate bioactive glass fiber content,the compressive strength and flexural strength of bone cement increased,and the setting time was prolonged.When bone cement was immersed in simulated body fluid,the precipitation of silicon ions,calcium ions,and phosphorus ions could be detected.Moreover,with the increase of silicate bioactive glass fiber content,the mass concentration of silicon ions and phosphorus ions released by bone cement increased,and the mass concentration of calcium ions decreased.(2)Live/dead staining and phalloidin staining results exhibited that silicate bioactive glass fiber composite calcium phosphate bone cement had no toxic effect on MC3T3-E1 cells.CCK-8 assay results showed that silicate bioactive glass fiber composite calcium phosphate bone cement could promote the proliferation of MC3T3-E1 cells.(3)With the increase of silicate bioactive glass fiber content in bone cement,the alkaline phosphatase activity and extracellular calcium deposition of MC3T3-E1 cells increased,the expression of RUNX2 protein increased,and the expression of alkaline phosphatase,osteocalcin,osteopontin,and RUNX2 mRNA expression increased.(4)The results indicate that silicate bioactive glass fibers can enhance the mechanical properties and osteogenic induction ability of calcium phosphate bone cement,among which 20％silicate bioactive glass fibers have a more obvious effect.

With the development of wearable technology, its use in venous thromboembolism (VTE) prevention is of increasing interest to clinical nurses. This paper reviews the technical principles and practical applications of wearable devices in VTE prevention, including the application of electrical stimulation devices and mechanical compression devices, the monitoring of limb activity and physiological parameters, summarizes the advantages of wearable devices in enhancing the efficiency of VTE prevention and patient experience, and discusses the current problems faced and the direction of future research, with the aim of promoting the development of wearable devices in VTE prevention.

BACKGROUND:The development of calcium phosphate bone cement is limited due to its poor mechanical properties and weak osteogenic ability.Silicate bioactive glass is highly favored due to its excellent biological activity and osteogenic ability.Simultaneously,fiber structures can enhance the mechanical strength of materials.OBJECTIVE:To investigate the mechanical properties,biocompatibility,and osteogenic effect of silicate bioactive glass fiber composite calcium phosphate bone cement.METHODS:Different mass percentages(0％,10％,and 20％)of silicate bioactive glass fiber were added to the solid phase of calcium phosphate bone cement,mixed with the liquid phase and cured for 48 hours to obtain silicate bioactive glass fiber composite calcium phosphate bone cement.The mechanical properties,setting time,and ion precipitation of the cement were characterized.The three groups of bone cement extracts were co-cultured with MC3T3-E1 cells.The cell compatibility of the materials was evaluated by CCK-8 assay,live/dead staining,and phalloidin staining.After osteogenic induction,the osteogenic induction ability of the materials was evaluated by alkaline phosphatase staining,alizarin red staining,RUNX2 immunofluorescence staining,and RT-PCR.RESULTS AND CONCLUSION:(1)With the increase of silicate bioactive glass fiber content,the compressive strength and flexural strength of bone cement increased,and the setting time was prolonged.When bone cement was immersed in simulated body fluid,the precipitation of silicon ions,calcium ions,and phosphorus ions could be detected.Moreover,with the increase of silicate bioactive glass fiber content,the mass concentration of silicon ions and phosphorus ions released by bone cement increased,and the mass concentration of calcium ions decreased.(2)Live/dead staining and phalloidin staining results exhibited that silicate bioactive glass fiber composite calcium phosphate bone cement had no toxic effect on MC3T3-E1 cells.CCK-8 assay results showed that silicate bioactive glass fiber composite calcium phosphate bone cement could promote the proliferation of MC3T3-E1 cells.(3)With the increase of silicate bioactive glass fiber content in bone cement,the alkaline phosphatase activity and extracellular calcium deposition of MC3T3-E1 cells increased,the expression of RUNX2 protein increased,and the expression of alkaline phosphatase,osteocalcin,osteopontin,and RUNX2 mRNA expression increased.(4)The results indicate that silicate bioactive glass fibers can enhance the mechanical properties and osteogenic induction ability of calcium phosphate bone cement,among which 20％silicate bioactive glass fibers have a more obvious effect.

Objective To assess the clinical effectiveness of Poly(p-dioxanone)(PPDO)bidirectional sawtooth inverted Ⅴ-shaped wiring and straight wiring in ameliorating nasolabial fold wrinkles within the context of facial rejuvenation.Methods Between March 2023 and January 2024,60 patients presenting with nasolabial fold wrinkles who underwent PPDO subcutaneous implantation and lifting in the Department of Plastic Surgery at the First Affiliated Hospital of Bengbu Medical University were randomly allocated into an observation group and a control group.At 4 weeks,12 weeks,and 24 weeks post-surgery,the clinical efficacy was statistically analyzed.The incidence of complications was documented to evaluate the safety of the procedure,and a satisfaction survey was carried out.Results In each time period,the Wrinkle Severity Rating Scale(WSRS)scores of both groups decreased significantly when compared to those prior to the operation(P<0.05).At each corresponding time point after surgery,there was a statistically significant difference in the WSRS scores between the two groups in the observation group(P<0.05).In both groups,the WSRS score was the lowest at 12 weeks post-surgery,and the score at 24 weeks post-surgery was significantly higher than that at 12 weeks post-surgery(P<0.05).The overall effective rate of facial improvement in the observation group was 93.33%,which was significantly higher than that in the control group(73.33%).The difference was statistically significant(χ2=4.320,P<0.05).No obvious complications occurred in either group.The satisfaction rate in the observation group was 4.067±0.828,which was significantly higher than that in the control group(3.400±0.932).The difference was statistically significant(t=2.929,P<0.05).Conclusions Both the PPDO two-way sawtooth line inverted Ⅴ-shaped wiring method and the straight wiring method can effectively improve nasolabial fold wrinkles.Compared with the straight wiring method,the inverted Ⅴ wiring method demonstrates a more pronounced improvement effect,higher subject satisfaction,and fewer consumables.The optimal results were achieved at 12 weeks after surgery for both wiring methods.Moreover,neither surgical procedure was associated with significant complications.

With the development of wearable technology, its use in venous thromboembolism (VTE) prevention is of increasing interest to clinical nurses. This paper reviews the technical principles and practical applications of wearable devices in VTE prevention, including the application of electrical stimulation devices and mechanical compression devices, the monitoring of limb activity and physiological parameters, summarizes the advantages of wearable devices in enhancing the efficiency of VTE prevention and patient experience, and discusses the current problems faced and the direction of future research, with the aim of promoting the development of wearable devices in VTE prevention.

Taking the reform of payment methods based on diagnosis related groups as an opportunity, implementing performance management based on disease groups is an important lever to promote the improvement of hospital diagnosis and treatment level and high-quality development. In 2023, a tertiary comprehensive hospital introduced benchmarking management into performance management, using the average days of stay, drug costs, and consumables costs of the disease group as cost benchmark indicators. The cost benchmark values for each disease group was determined based on the big data of the disease group of the tertiary comprehensive hospital in the region and the clinical pathway management goals of the hospital. Through multidimensional and multi-level comparative analysis of the hospital′s historical values and regional big data distribution values of the benchmark indicators for each disease group, the cost benchmark values for each disease group was determined. The hospital has established a performance reward and punishment mechanism based on the benchmark value of disease group costs, and at the same time, established a performance management communication mechanism to promote relevant departments and medical groups to improve their management against the benchmark. In addition, with changes in the external environment and internal practices, the cost benchmark value of the disease group was dynamically optimized, forming a closed-loop management system that included establishing benchmarks, comparing benchmarks, achieving benchmarks, and optimizing benchmarks. Since the implementation of performance management based on disease group cost benchmarking in March 2023, the hospital′s case mix index has increased from 1.52 in March to 1.54 in September; The average days of stay decreased from 6.22 days to 5.90 days; The monthly payment weight has increased from 18 103 to 18 558; The average hospitalization cost has decreased from 16 724 yuan/person to 15 278 yuan/person, mainly due to the decrease in drug and consumables costs. The proportion of drug costs has decreased from 27.45% to 26.32%, the proportion of consumables costs has decreased from 28.75% to 26.85%, and the proportion of medical service revenue has increased from 24.64% to 26.08%; The proportion of low magnification cases decreased from 9.09% to 8.24%; The medical insurance payment rate has increased from 99.3% to 107.0%; The job satisfaction of physicians has increased from 70.00% in 2022 to 76.77% in 2023, which can provide reference for performance management practices in other hospitals.

Objective　To explore the effect of Mp1p on host macrophages through transcriptomics combined with metabolomics. Methods Firstly, a THP-1 macrophage strain (THP-1-Mp1p+) stably expressing Mp1p was constructed using lentivirus. Secondly, using high-throughput RNA sequencing (RNA Seq) technology, the expression level of intracellular mRNA was detected in transcriptomics analysis to determine differentially expressed genes; In metabolomics analysis, metabolite identification was performed through database comparison, and pathway analysis was performed on differential metabolites to reveal potential mechanisms of action. Finally, the results of metabolomics and transcriptomics were combined for analysis, and differential metabolites and genes were analyzed to further elucidate the mechanism of action of Mp1p on macrophages. Results Transcriptome analysis showed that, compared with the negative control group, the THP-1-Mp1p+ group had a total of 1 180 differentially expressed genes (DEGs), with 345 upregulated genes and 835 downregulated genes. GO enrichment analysis of DEGs showed that there were 135 differentially expressed genes, including 105 in biological processes (BP), 28 in cellular components (CC), and 2 in molecular functions (MF). The KEGG analysis results showed that the effect of Mp1p on THP-1 macrophages was highly correlated with the TNF pathway. The metabolomic analysis found that both the blank control group and the THP-1-Mp1p+ macrophage group achieved good separation between QC samples in both positive and negative ion modes. The threshold for significant differential metabolites was set at: VIP≥1 and T-test P<0.05, resulting in the identification of 488 differential metabolites, with 230 in the positive ion mode and 258 in the negative ion mode. Pathway enrichment analysis of the identified metabolites pointed to significant enrichment in metabolic pathways. The combined analysis confirmed that the tumor necrosis factor signaling pathway, interleukin-17 signaling pathway, and NF-kappaB signaling pathway were important metabolic pathways involved. Conclusions The virulence factor Mp1p may affect host macrophages by modulating the tumor necrosis factor signaling pathway, interleukin-17 signaling pathway, and NF-kappaB signaling pathway. The findings contribute to a better understanding of the mechanisms of action of Mp1p and may offer potential directions for the selection of relevant diagnostic and therapeutic targets in the future.