The innate immune system can be boosted in response to subsequent triggers by pre-exposure to microbes or microbial products, known as “trained immunity”. Compared to classical immune memory, innate trained immunity has several different features. Firstly, the molecules involved in trained immunity differ from those involved in classical immune memory. Innate trained immunity mainly involves innate immune cells (e.g., myeloid immune cells, natural killer cells, innate lymphoid cells) and their effector molecules (e.g., pattern recognition receptor (PRR), various cytokines), as well as some kinds of non-immune cells (e.g., microglial cells). Secondly, the increased responsiveness to secondary stimuli during innate trained immunity is not specific to a particular pathogen, but influences epigenetic reprogramming in the cell through signaling pathways, leading to the sustained changes in genes transcriptional process, which ultimately affects cellular physiology without permanent genetic changes (e.g., mutations or recombination). Finally, innate trained immunity relies on an altered functional state of innate immune cells that could persist for weeks to months after initial stimulus removal. An appropriate inducer could induce trained immunity in innate lymphocytes, such as exogenous stimulants (including vaccines) and endogenous stimulants, which was firstly discovered in bone marrow derived immune cells. However, mature bone marrow derived immune cells are short-lived cells, that may not be able to transmit memory phenotypes to their offspring and provide long-term protection. Therefore, trained immunity is more likely to be relied on long-lived cells, such as epithelial stem cells, mesenchymal stromal cells and non-immune cells such as fibroblasts. Epigenetic reprogramming is one of the key molecular mechanisms that induces trained immunity, including DNA modifications, non-coding RNAs, histone modifications and chromatin remodeling. In addition to epigenetic reprogramming, different cellular metabolic pathways are involved in the regulation of innate trained immunity, including aerobic glycolysis, glutamine catabolism, cholesterol metabolism and fatty acid synthesis, through a series of intracellular cascade responses triggered by the recognition of PRR specific ligands. In the view of evolutionary, trained immunity is beneficial in enhancing protection against secondary infections with an induction in the evolutionary protective process against infections. Therefore, innate trained immunity plays an important role in therapy against diseases such as tumors and infections, which has signature therapeutic effects in these diseases. In organ transplantation, trained immunity has been associated with acute rejection, which prolongs the survival of allografts. However, trained immunity is not always protective but pathological in some cases, and dysregulated trained immunity contributes to the development of inflammatory and autoimmune diseases. Trained immunity provides a novel form of immune memory, but when inappropriately activated, may lead to an attack on tissues, causing autoinflammation. In autoimmune diseases such as rheumatoid arthritis and atherosclerosis, trained immunity may lead to enhance inflammation and tissue lesion in diseased regions. In Alzheimer’s disease and Parkinson’s disease, trained immunity may lead to over-activation of microglial cells, triggering neuroinflammation even nerve injury. This paper summarizes the basis and mechanisms of innate trained immunity, including the different cell types involved, the impacts on diseases and the effects as a therapeutic strategy to provide novel ideas for different diseases.

This paper systematically summarizes the practical experience of the 2025 Dingri earthquake emergency medical rescue in Tibet. It analyzes the requirements for earthquake medical rescue under conditions of high-altitude hypoxia, low temperature, and low air pressure. The paper provides a detailed discussion on the strategic layout of earthquake medical rescue at the national level, local government level, and through social participation. It covers the construction of rescue organizational systems, technical systems, material support systems, and information systems. The importance of building rescue teams is emphasized. In high-altitude and cold conditions, rapid response, scientific decision-making, and multi-party collaboration are identified as key elements to enhance rescue efficiency. By optimizing rescue organizational structures, strengthening the development of new equipment, and promoting telemedicine technologies, the precision and effectiveness of medical rescue can be significantly improved, providing important references for future similar disaster rescues.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

Objective:To construct an evaluation indicator system based on data envelopment analysis(DEA)and technique for order preference by similarity to ideal solution(TOPSIS)of quality management for medical equipment,so as to explore the applied effect of that in quality management for equipment of the department of radiology in hospital.Methods:The DEA method was applied to analyze the quality management situation of equipment at the department of radiology,Beijing Chao-yang Hospital,Capital Medical University.The TOPSIS was used to conduct a comprehensive evaluation and ranking for the quality of managing equipment,and the evaluation indicator system was combined to evaluate results and carried out management of quality control for equipment.A total of 90 medical imaging equipment in clinical use at our hospital from January to December 2023 were selected,and they were divided into conventional management method group,and DEA combined with TOPSIS management method group by using random number table method,with 45 medical imaging equipment in each management method.The scores for multi-dimensional performance,the scores for management quality,the operational quality and the rates of management defect between different management methods were compared.Results:The scores of use efficiency,operation efficiency and maintenance efficiency of adopting DEA combined with TOPSIS management method were(92.03±5.02)points,(93.52±5.14)points and(92.698±4.36)points,respectively,which were significantly higher than those of conventional management methods,and the differences were statistically significant(t=10.260,7.826,6.413,P<0.05).The scores of the allocation of equipment resource,technical support,information basis,and management performance indicator of the DEA combined with TOPSIS management method were significantly higher than those of conventional management method,and the differences were statistically significant(t=6.855,9.279,8.246,P<0.05).The damage rate and maintenance rate of equipment of combining DEA with TOPSIS management method were significantly lower than those of the conventional management methods,and the differences were statistically significant(x2=6.944,6.480,P<0.05).Conclusion:The application of the constructed system,which based on DEA and TOPSIS for evaluation indicator of quality management for medical imaging equipment of hospital,can improve the multidimensional efficiency of equipment,and enhance the quality of management and operation for equipment,and reduce the defect rate of managing equipment,and ensure the stable and efficient application of equipment.

Turning to critical illness is a common stage of various diseases and injuries before death. Patients usually have complex health conditions, while the treatment process involves a wide range of content, along with high requirements for doctor′s professionalism and multi-specialty teamwork, as well as a great demand for time-sensitive treatments. However, this is not matched with critical care professionals and the current state of medical care in China. Telemedicine, which shortens the distance of medical professionals and the gap of disease diagnosis and treatments in various regions through electronic information, can effectively solve the current problem. Therefore, there is an urgent need to develop a standardized, high-quality visualization telemedicine round system .Therefore, experts have been organized to search domestic and foreign literature on telemedicine round for critically ill patients and to form this consensus based on clinical experiences so as to further improve the level of critical care treatments in regions.

Objective:To study the risk factors and the molecular epidemiology characteristics for Carbapenem-resistant Enterobacteriaceae(CRE) colonization in neonatal inpatients in Shenzhen region, China, which provide reference for the prevention and control of clinical CRE infection.Methods:This study is a prospective case-control study.Anal samples from inpatients between January 2023 and December 2023 at Longgang Maternity and Child Institute of Shantou University Medical College and Shenzhen Children's Hospital were collected for screening CRE strain. Drug susceptibility test, modified Carbapenem Inactivation Method (mCIM) test, drug resistance-related gene sequencing and multilocus sequence typing (MLST) were performed for isolated CRE strains.Meanwhile, the clinical data were collected for analyzing the risk factors of CRE intestinal colonization by multivariate regression analysis.Results:A total of 1 517 patients were screened, 26 CRE(1.7%, 26/1 517) were identified which including 14 Escherichia coli(53.8%, 14/26), 11 Klebsiella pneumoniae(42.3%, 11/26), 1 Enterobacter cloacae(3.9%, 1/26). The predominant carbapenemase gene was New Delhi Metallo(NDM) (92.4%, 24/26), followed by Imipenem (IMP) (3.8%, 1/26) and Guiana extended spectrum gene (GES) (3.8%, 1/26).Among the carried NDM resistance genes, New Delhi Metallo 5 (NDM5) was the main one, accounting for 84.6% (22/26).The MLST typing of Escherichia coli was mainly Sequence Type 48 (ST48) (6/14), while that of Klebsiella pneumoniae was mainly Sequence Type 35 (ST35) (10/11). All CRE isolates were resistant to penicillin, penicillinase inhibitors, cephalosporins, ertapenem and imipenem.The resistance rates of Escherichia coli to amikacin, levofloxacin was 1/14, 4/14, respectively. All isolates of Klebsiella pneumoniae were sensitive to amikacin, and the resistance rate to levofloxacin is 1/11. Risk factors for CRE colonization include the older age, length of hospital stay, tracheal intubation, invasive respiration, lumbar puncture, Apgar <7 score, and exposure to antibiotics.Conclusions:NDM5 is the predominant resistant gene in CRE isolated from neonatal patients feces in Shenzhen region.It is necessary to strengthen the screening of CRE colonization in neonate for prevention and control of CRE infection.

Objective To investigate the changing antibiotic resistance profiles of E.coli isolated from patients in the 52 hospitals participating in the CHINET program from 2015 to 2021.Methods Antimicrobial susceptibility was tested for clinical isolates of E.coli according to the unified protocol of CHINET program.WHONET 5.6 and SPSS 20.0 software were used for data analysis.Results Atotal of 289 760 nonduplicate clinical strains ofE.coli were isolated from 2015 to 2021,mainly from urine samples(44.7±3.2)％.The proportion of E.coli strains isolated from urine samples was higher in females than in males(59.0％vs 29.5％).The proportion of E.coli strains isolated from respiratory tract and cerebrospinal fluid samples was significantly higher in children than in adults(16.7％vs 7.8％,0.8％vs 0.1％,both P＜0.05).The isolates from internal medicine department accounted for the largest proportion(28.9±2.8)％with an increasing trend over years.Overall,the prevalence of ESBLs-producing E.coli and carbapenem resistant E.coli(CREco)was 55.9％and 1.8％,respectively during the 7-year period.The prevalence of ESBLs-producing E.coli was the highest in tertiary hospitals each year from 2015 to 2021 compared to secondary hospitals.The prevalence of CREco was higher in children's hospitals compared to secondary and tertiary hospitals each year from 2015 to 2021.The prevalence of ESBLs-producing E.coli in tertiary hospitals and children's hospitals and the prevalence of CREco in children's hospitals showed a decreasing trend over the 7-year period.The prevalence of CREco in secondary and tertiary hospitals increased slowly.Antibiotic resistance rates changed slowly from 2015 to 2021.Carbapenem drugs(imipenem,meropenem)were the most active drugs amongβ-lactams against E.coli(resistance rate≤2.1％).The resistance rates of E.coli to β-lactam/β-lactam inhibitor combinations(piperacillin-tazobactam,cefoperazone-sulbactam),aminoglycosides(amikacin),nitrofurantoin and fosfomycin(for urinary isolates only)were all less than 10％.The resistance rate of E.coli strains to antibiotics varied with the level of hospitals and the departments where the strains were isolated,especially for cefazolin and ciprofloxacin,to which the resistance rate of E.coli strains from children in non-ICU departments was significantly lower than that of the strains isolated from other departments(P＜0.05).The E.coli isolates from ICU showed higher resistance rate to most antimicrobial agents tested(excluding tigecycline)than the strains isolated from other departments.The E.coli strains isolated from tertiary hospitals showed higher resistance rates to the antimicrobial agents tested(excluding tigecycline,polymyxin B,cefepime and carbapenems)than the strains from secondary hospitals and children's hospitals.Conclusions E.coli is an important pathogen causing clinical infection.More than half of the clinical isolates produced ESBL.The prevalence of CREco is increasing in secondary and tertiary hospitals over the 7-year period even though the overall prevalence is still low.This is an issue of concern.

This consensus was developed by the Orthodontic Society of the Chinese Stomatological Association to provide a systematic, scientific, and practical guideline for informed consent in orthodontic care. Orthodontic treatment is typically lengthy, highly individualized, and involves multiple factors such as growth and development, occlusal function, and facial esthetics. Rapid technological advances and diverse risk profiles make the traditional reliance on orthodontist experience or institutional templates insufficient to ensure patients′ full understanding and autonomous decision-making. To address this, the expert panel conducted extensive reviews of domestic and international guidelines, analyzed representative dispute cases, and performed multicenter patient-clinician surveys. Using a multi-round Delphi method, the group established a standardized informed consent framework covering the initial consultation, treatment, and retention phases. The consensus emphasizes that informed consent is not only a fundamental legal and ethical requirement but also a key step in building trust, improving patient compliance, and enhancing treatment satisfaction. Orthodontists should clearly and comprehensively explain treatment plans, potential risks, uncertainties, and associated costs, while respecting the autonomy of patients or guardians, and maintain continuous communication and dynamic evaluation throughout the treatment process. The release of this consensus provides unified and authoritative guidance for clinical orthodontics, helping to standardize informed consent, enhance its transparency, safeguard patient rights, reduce medical risks, and promote high-quality, sustainable development of orthodontic practice.

Guided by the concept of quality by design(QbD), this study optimizes the calcination and quenching process of calcined Magnetitum and establishes the XRD characteristic spectra of calcined Magnetitum, providing a scientific basis for the formulation of quality standards. Based on the processing methods and quality requirements of Magnetitum in the Chinese Pharmacopoeia, the critical process parameters(CPPs) identified were calcination temperature, calcination time, particle size, laying thickness, and the number of vinegar quenching cycles. The critical quality attributes(CQAs) included Fe mass fraction, Fe~(2+) dissolution, and surface color. The weight coefficients were determined by combining Analytic Hierarchy Process(AHP) and the criteria importance though intercrieria correlation(CRITIC) method, and the calcination process was optimized using orthogonal experimentation. Surface color was selected as a CQA, and based on the principle of color value, the surface color of calcined Magnetitum was objectively quantified. The vinegar quenching process was then optimized to determine the best processing conditions. X-ray diffraction(XRD) was used to establish the characteristic spectra of calcined Magnetitum, and methods such as similarity evaluation, cluster analysis, and orthogonal partial least squares-discriminant analysis(OPLS-DA) were used to evaluate the quality of the spectra. The optimized calcined Magnetitum preparation process was found to be calcination at 750 ℃ for 1 h, with a laying thickness of 4 cm, a particle size of 0.4-0.8 cm, and one vinegar quenching cycle(Magnetitum-vinegar ratio 10∶3), which was stable and feasible. The XRD characteristic spectra analysis method, featuring 9 common peaks as fingerprint information, was established. The average correlation coefficient ranged from 0.839 5-0.988 1, and the average angle cosine ranged from 0.914 4 to 0.995 6, indicating good similarity. Cluster analysis results showed that Magnetitum and calcined Magnetitum could be grouped together, with similar compositions. OPLS-DA discriminant analysis identified three key characteristic peaks, with Fe_2O_3 being the distinguishing component between the two. The final optimized processing method is stable and feasible, and the XRD characteristic spectra of calcined Magnetitum was initially established, providing a reference for subsequent quality control and the formulation of quality standards for calcined Magnetitum.
X-Ray Diffraction/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Particle Size