OBJECTIVE: To compare the short-term clinical efficacy and safety of closed reduction with Kirschner wire fixation versus open reduction with plate fixation for treating osteoporotic Colles' fractures in middle-aged and elderly patients. METHODS: Between January 2018 and January 2023, 119 patients with Colles fractures were retrospectively analyzed, including 39 males and 80 females, aged from 48 to 74 years old with an average of(60.58±6.71) years old. The time from injury to operation ranged 1 to 13 days with an average of (5.29±2.52) days. According to the surgical method, they were divided into Kirschner wire fixation group (Kirschner wire group) and plate internal fixation group (plate group). In Kirschner wire group, there were a total of 68 patients, comprising 21 males and 47 females. The average age was (61.15±6.24) years old, ranged from 49 to 74 years old. Among them, 41 cases involved the left side while 27 cases involved the right side. In the plate group, there were a total of 51 patients, including 18 males and 33 females. The average age was (59.78±5.71) years old ranged from 48 to 72 years old. Among them, there were 31 cases on the left side and 20 cases on the right side. The following parameters were recorded before and after the operation:operation time, intraoperative blood loss, hospitalization days, hospitalization expenses, postoperative complications, and radiographic parameters of distal radius (distal radius height, ulnar deviation angle, palmar tilt angle). The clinical efficacy was evaluated at 3 and 12 months after the operation using Gartland-Werley and disabilites of the arm shoulder and hand (DASH) scores. RESULTS: The patients in both groups were followed up for a duration from 12 to 19 months with an average of(13.32±2.02) months. The Kirschner wire group exhibited significantly shorter operation time compared to the plate group 27.91(13.00, 42.00) min vs 67.52(29.72, 105.32) min, Z=-8.74, P=0.00. Intraoperative blood loss was also significantly lower in the Kirschner wire group than in the plate group 3.24(1.08, 5.40) ml vs 21.91(17.38, 26.44) ml, Z=-9.31, P=0.00. Furthermore, patients in the Kirschner wire group had a shorter length of hospital stay compared to those in the plate group (8.38±2.63) days vs (11.40±2.78) days, t=-3.12, P=0.00. Additionally, hospitalization cost was significantly lower in the Kirschner wire group than in the plate group 10 111.29(6 738.98, 13 483.60) yuan vs 15 871.11(11 690.40, 20 051.82) yuan, Z=-5.62, P=0.00. The incidence of complications was 2 cases in the Kirschner wire group and 1 case in the plate group, with no statistically significant difference(P>0.05). At 3 months postoprative, the radial height of the Kirschner wire group was found to be significantly smaller than that of the plate group, with measurements of (11.45±1.69) mm and (12.11±1.78) mm respectively (t=-2.06, P=0.04). However, there were no statistically significant differences observed in ulnar deviation angle and palmar tilt angle between the two groups (P>0.05). The DASH score and Gartland-Werley score in the Kirschner group were significantly higher than those in the plate group at 3 months post-operation (19.10±9.89) vs (13.47±3.51), t=4.34, P=0.00;(11.15±3.61) vs (6.41±2.75), t=8.13, P=0.00). However, there was no significant difference between the two groups at 12 months post-operation (P>0.05). CONCLUSION Compared to plate internal fixation, closed reduction with Kirschner wire support fixation yields a slightly inferior recovery of radial height;however, there is no significant disparity in the functional score of the affected limb at 12 months post-operation. Nonetheless, this technique offers advantages such as shorter operation time, reduced intraoperative blood loss, decreased hospitalization duration, and lower cost.
Humans ; Female ; Male ; Middle Aged ; Aged ; Fracture Fixation, Internal/instrumentation* ; Bone Wires ; Bone Plates ; Retrospective Studies ; Colles' Fracture/surgery* ; Minimally Invasive Surgical Procedures/methods* ; Open Fracture Reduction/methods* ; Osteoporotic Fractures/surgery*

OBJECTIVES: To evaluate the effectiveness of single-balloon and double-balloon enteroscopy in diagnosing pediatric small bowel diseases and assess the diagnostic efficacy of computed tomography enterography (CTE) for small bowel diseases using enteroscopy as the reference standard. METHODS: Clinical data from 576 children who underwent enteroscopy at Hunan Children's Hospital between January 2017 and December 2023 were retrospectively collected. The children were categorized based on enteroscopy type into the single-balloon enteroscopy (SBE) group (n=457) and double-balloon enteroscopy (DBE) group (n=119), and the clinical data were compared between the two groups. The sensitivity and specificity of CTE for diagnosing small bowel diseases were evaluated using enteroscopy results as the standard. RESULTS: Among the 576 children, small bowel lesions were detected by enteroscopy in 274 children (47.6%).There was no significant difference in lesion detection rates or complication rates between the SBE and DBE groups (P>0.05), but the DBE group had deeper insertion, longer procedure time, and higher complete small bowel examination rate (P<0.05). The complication rate during enteroscopy was 4.3% (25/576), with 18 cases (3.1%) of mild complications and 7 cases (1.2%) of severe complications, which improved with symptomatic treatment, surgical, or endoscopic intervention. Among the 412 children who underwent CTE, the sensitivity and specificity for diagnosing small bowel diseases were 44.4% and 71.3%, respectively. CONCLUSIONS SBE and DBE have similar diagnostic efficacy for pediatric small bowel diseases, but DBE is preferred for suspected deep small bowel lesions and comprehensive small bowel examination. Enteroscopy in children demonstrates relatively good overall safety. CTE demonstrates relatively low sensitivity but comparatively high specificity for diagnosing small bowel diseases.
Retrospective Studies ; Treatment Outcome ; Double-Balloon Enteroscopy/statistics & numerical data* ; Single-Balloon Enteroscopy/statistics & numerical data* ; Humans ; Male ; Female ; Child ; Operative Time ; Tomography, X-Ray Computed/statistics & numerical data* ; Sensitivity and Specificity ; Intestine, Small/surgery* ; Intestinal Diseases/surgery*

Apical microsurgery is accurate and minimally invasive, produces few complications, and has a success rate of more than 90%. However, due to the lack of awareness and understanding of apical microsurgery by dental general practitioners and even endodontists, many clinical problems remain to be overcome. The consensus has gathered well-known domestic experts to hold a series of special discussions and reached the consensus. This document specifies the indications, contraindications, preoperative preparations, operational procedures, complication prevention measures, and efficacy evaluation of apical microsurgery and is applicable to dentists who perform apical microsurgery after systematic training.
Microsurgery/standards* ; Humans ; Apicoectomy ; Contraindications, Procedure ; Tooth Apex/diagnostic imaging* ; Postoperative Complications/prevention & control* ; Consensus ; Treatment Outcome

Pulpotomy, which belongs to vital pulp therapy, has become a strategy for managing pulpitis in recent decades. This minimally invasive treatment reflects the recognition of preserving healthy dental pulp and optimizing long-term patient-centered outcomes. Pulpotomy is categorized into partial pulpotomy (PP), the removal of a partial segment of the coronal pulp tissue, and full pulpotomy (FP), the removal of whole coronal pulp, which is followed by applying the biomaterials onto the remaining pulp tissue and ultimately restoring the tooth. Procedural decisions for the amount of pulp tissue removal or retention depend on the diagnostic of pulp vitality, the overall treatment plan, the patient's general health status, and pulp inflammation reassessment during operation. This statement represents the consensus of an expert committee convened by the Society of Cariology and Endodontics, Chinese Stomatological Association. It addresses the current evidence to support the application of pulpotomy as a potential alternative to root canal treatment (RCT) on mature permanent teeth with pulpitis from a biological basis, the development of capping biomaterial, and the diagnostic considerations to evidence-based medicine. This expert statement intends to provide a clinical protocol of pulpotomy, which facilitates practitioners in choosing the optimal procedure and increasing their confidence in this rapidly evolving field.
Humans ; Calcium Compounds/therapeutic use* ; Consensus ; Dental Pulp ; Dentition, Permanent ; Oxides/therapeutic use* ; Pulpitis/therapy* ; Pulpotomy/standards*

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

Bisphosphonates(BP),a class of commonly used medications for treating osteoporosis and bone malignancies,significantly affect bone metabolism.When dental implants are placed in patients receiving BP,the potential impacts of BP on the formation and long-term maintenance of implant osseointegration cannot be ignored.In addition,the influence of dental implants on the occurrence of BP-related osteonecrosis of the jaw is garnering attention.This article explores the influences of BP on the stability of dental implants based on a review of previous animal and clinical studies,discusses the impact of dental implants on the occurrence of BP-related osteonecrosis of the jaw,and proposes suggestions for the dental implant treatment of patients taking BP in clinical practice.This review is expected to provide a theoretical basis for the related research and clinical treatment.
Humans ; Dental Implants ; Animals ; Diphosphonates/pharmacology* ; Osseointegration/drug effects* ; Bisphosphonate-Associated Osteonecrosis of the Jaw

AIM To prepare anisamide-modified ursolic acid self-assembled nanoparticles,and to evaluate their anti-drug resistance effect of enzalutamide on prostate cancer.METHODS Nanoparticle precipitation method was adopted in the preparation of anisamide-modified and non-anisamide-modified self-assembled nanoparticles,respectively,after which the particle size,Zeta potential and encapsulation efficiency were determined,and the morphology was observed under transmission electron microscope.The intake of cancer-associated fibroblasts(CAFs)was investigated,after which the model for enzalutamide resistance in prostate cancer was established,CCK8 assay was applied to analyzing the sensitization effect of self-assembled nanoparticles on enzalutamide,and Western blot was used for the detection of NRG1,HER3,AKT expressions.RESULTS The anisamide-modified self-assembled nanoparticles demonstrated the average particle size,Zeta potential and encapsulation efficiency of(195.13±8.06)nm,(-29.07±0.55)mV and(94.58±0.84)％,respectively.CAFs displayed higher intake in the anisamide-modified self-assembled nanoparticles than that in the non-modified preparation and free Cy5(P＜0.05).Meanwhile,anisamide-modified self-assembled nanoparticles were able to inhibit enzalutamide resistance caused by CAFs,reduce NRG1 expression on CAFs,and anisamide-modified self-assembled nanoparticles-treated conditioned medium of CAFs could reduce HER3 and AKT expression on LNCaP cells(P＜0.05,P＜0.01).CONCLUSION Anisamide-modified ursolic acid self-assembled nanoparticles can enhance the targeting of CAFs,alleviate the drug resistance effect of enzalutamide on prostate cancer caused by CAFs,and reduce NRG1 expression in CAFs.

Aim To compare the observation results of atomic force microscopy(AFM)and scanning electron microscopy(SEM),and to summarize the main problems and solutions of AFM in observing biological macromolecules,using the observa-tion subjects of protein samples purified by our research group.Methods The protein samples were diluted to 15 nmol·L-1 with PBS,fixed on glass slides,silicon wafers,and mica sheets,dried,and made into solid-phase observation samples.SEM sam-ples were plated with platinum before observation.The surface structures of proteins were observed using AFM and SEM,sample heights were calculated,and differences in results were com-pared.Results Protein samples with positive charges tended to shift to the right during observation due to the repulsion of the AFM probe;mica sheets could effectively eliminate the positive charge of proteins to avoid sample movement;PBS provided a stable environment for protein samples,but the crystallization of PBS salts interfered with probe operation and imaging clarity;SEM samples needed to be plated with platinum before observa-tion and could not achieve the precision of AFM.Conclusions Both AFM and SEM can directly observe protein structures in vitro,with AFM providing higher precision results;when protein sample stability permits,ultrapure water is preferred as the sol-vent carrier,and volatile liquids such as ethanol can also serve as solvent carriers.The application of AFM offers a new approach for pharmacological studies on interactions between biological macromolecules.

Aim To compare the observation results of atomic force microscopy(AFM)and scanning electron microscopy(SEM),and to summarize the main problems and solutions of AFM in observing biological macromolecules,using the observa-tion subjects of protein samples purified by our research group.Methods The protein samples were diluted to 15 nmol·L-1 with PBS,fixed on glass slides,silicon wafers,and mica sheets,dried,and made into solid-phase observation samples.SEM sam-ples were plated with platinum before observation.The surface structures of proteins were observed using AFM and SEM,sample heights were calculated,and differences in results were com-pared.Results Protein samples with positive charges tended to shift to the right during observation due to the repulsion of the AFM probe;mica sheets could effectively eliminate the positive charge of proteins to avoid sample movement;PBS provided a stable environment for protein samples,but the crystallization of PBS salts interfered with probe operation and imaging clarity;SEM samples needed to be plated with platinum before observa-tion and could not achieve the precision of AFM.Conclusions Both AFM and SEM can directly observe protein structures in vitro,with AFM providing higher precision results;when protein sample stability permits,ultrapure water is preferred as the sol-vent carrier,and volatile liquids such as ethanol can also serve as solvent carriers.The application of AFM offers a new approach for pharmacological studies on interactions between biological macromolecules.

AIM To prepare anisamide-modified ursolic acid self-assembled nanoparticles,and to evaluate their anti-drug resistance effect of enzalutamide on prostate cancer.METHODS Nanoparticle precipitation method was adopted in the preparation of anisamide-modified and non-anisamide-modified self-assembled nanoparticles,respectively,after which the particle size,Zeta potential and encapsulation efficiency were determined,and the morphology was observed under transmission electron microscope.The intake of cancer-associated fibroblasts(CAFs)was investigated,after which the model for enzalutamide resistance in prostate cancer was established,CCK8 assay was applied to analyzing the sensitization effect of self-assembled nanoparticles on enzalutamide,and Western blot was used for the detection of NRG1,HER3,AKT expressions.RESULTS The anisamide-modified self-assembled nanoparticles demonstrated the average particle size,Zeta potential and encapsulation efficiency of(195.13±8.06)nm,(-29.07±0.55)mV and(94.58±0.84)％,respectively.CAFs displayed higher intake in the anisamide-modified self-assembled nanoparticles than that in the non-modified preparation and free Cy5(P＜0.05).Meanwhile,anisamide-modified self-assembled nanoparticles were able to inhibit enzalutamide resistance caused by CAFs,reduce NRG1 expression on CAFs,and anisamide-modified self-assembled nanoparticles-treated conditioned medium of CAFs could reduce HER3 and AKT expression on LNCaP cells(P＜0.05,P＜0.01).CONCLUSION Anisamide-modified ursolic acid self-assembled nanoparticles can enhance the targeting of CAFs,alleviate the drug resistance effect of enzalutamide on prostate cancer caused by CAFs,and reduce NRG1 expression in CAFs.