In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

Objective: To develop a RHCE genotyping assay based on kompetitive allele-specific PCR (KASP) and assess its clinical accuracy for RhCE blood group determination. Methods: KASP primers were designed to interrogate three RHCE loci: the 109 bp insertion/deletion in intron 2, c. 307T>C, and c. 676C>G. A total of 1 194 RhD-positive inpatients from Chengdu were typed by both KASP genotyping and manual tube serology. Discordant samples (n=10) were retested by both methods and further resolved by Sanger sequencing. An additional 377 cases were tested for the c. 48C>G locus to evaluate the predictive accuracy of individual loci and combined locus testing for RhC antigen. Results: Genotyping concordance with serology was 100.0% for both the c. 676C>G locus (RhE/Rhe) and the c. 307T>C locus (Rhc). For RhC prediction using the 109 bp insertion, overall accuracy was 99.7% (1 191/1 194); the 3 discordant cases were confirmed by Sanger sequencing to be false negatives attributable to 109 bp deletion in intron 2. Testing the c. 48C>G allele for RhC prediction yielded 7 false positives, with an accuracy of 98.1% (370/377). RhC antigen status was determined by combining the 109 bp insertion and the c. 48C allele. After excluding 10 samples with inconsistent results between the two loci, the accuracy reached 100% in the remaining 367 samples. When both loci were applied in combination, accuracy reached 100% in the 367 cases with concordant results. Among the 1 194 patients, CCee (45.8%) and CcEe (31.7%) were the most common RhCE phenotypes. The e antigen had the highest positivity rate (92.2%), and the Ce haplotype was the most frequent (66.9%). Conclusion: The KASP-based RHCE genotyping method achieves high accuracy for clinical RhCE typing. Combining the 109 bp insertion/deletion with the c. 48C allele significantly improves RhC antigen prediction compared with either locus alone. This method was applied to RhCE genotyping of 1 194 RhD-positive inpatients in Chengdu, providing local RhCE phenotype and haplotype distribution data to support RhCE-matched transfusion practice.

Diterpenoid ferruginol is a key intermediate in biosynthesis of active ingredients such as tanshinone and carnosic acid.However, the traditional process of obtaining ferruginol from plants is often cumbersome and inefficient. In recent years, the increasingly developing gene editing technology has been gradually applied to the heterologous production of natural products, but the production of ferruginol in microbe is still very low, which has become an obstacle to the efficient biosynthesis of downstream chemicals, such as tanshinone. In this study, miltiradiene was produced by integrating the shortened diterpene synthase fusion protein,and the key genes in the MVA pathway were overexpressed to improve the yield of miltiradiene. Under the shake flask fermentation condition, the yield of miltiradiene reached about(113. 12±17. 4)mg·L~(-1). Subsequently, this study integrated the ferruginol synthase Sm CYP76AH1 and Sm CPR1 to reconstruct the ferruginol pathway and thereby realized the heterologous synthesis of ferruginol in Saccharomyces cerevisiae. The study selected the best ferruginol synthase(Il CYP76AH46) from different plants and optimized the expression of pathway genes through redox partner engineering to increase the yield of ferruginol. By increasing the copy number of diterpene synthase, CYP450, and CPR, the yield of ferruginol reached(370. 39± 21. 65) mg·L~(-1) in the shake flask, which was increased by 21. 57-fold compared with that when the initial ferruginol strain JMLT05 was used. Finally, 1 083. 51 mg·L~(-1) ferruginol was obtained by fed-batch fermentation, which is the highest yield of ferruginol from biosynthesis so far. This study provides not only research ideas for other metabolic engineering but also a platform for the construction of cell factories for downstream products.
Saccharomyces cerevisiae/genetics* ; Diterpenes/metabolism* ; Metabolic Engineering ; Fermentation ; Abietanes

Apical microsurgery is accurate and minimally invasive, produces few complications, and has a success rate of more than 90%. However, due to the lack of awareness and understanding of apical microsurgery by dental general practitioners and even endodontists, many clinical problems remain to be overcome. The consensus has gathered well-known domestic experts to hold a series of special discussions and reached the consensus. This document specifies the indications, contraindications, preoperative preparations, operational procedures, complication prevention measures, and efficacy evaluation of apical microsurgery and is applicable to dentists who perform apical microsurgery after systematic training.
Microsurgery/standards* ; Humans ; Apicoectomy ; Contraindications, Procedure ; Tooth Apex/diagnostic imaging* ; Postoperative Complications/prevention & control* ; Consensus ; Treatment Outcome

OBJECTIVE: Blood culture remains the gold standard for diagnosing bloodstream infections. Clinical laboratories must ensure the quality of blood culture processes from receipt to obtaining definitive results. We examined laboratory analytical indicators associated with positive blood culture results. METHODS: Blood cultures collected from Peking Union Medical College Hospital between January 1, 2020, and December 31, 2022, were retrospectively analyzed. The mode of transportation (piping logistics delivery vs. staff), source of blood cultures (outpatient/emergency department vs. inpatient department), rotation of personnel, and time of reception (8:00-19:59 vs. 20:00-07:59) were compared between blood culture-positive and -negative results. RESULTS: Between 2020 and 2022, the total positive rate of blood culture was 8.07%. The positive rate of blood cultures in the outpatient/emergency department was significantly higher than that in the inpatient department (12.46% vs. 5.83%; P < 0.0001). The time-to-detection of blood cultures was significantly affected by the delivery mode and personnel rotation. The blood culture positive rate of the total pre-analytical time within 1 h was significantly higher than that within 1-2 h or > 2 h ( P < 0.0170). CONCLUSION Laboratory analytical indicators such as patient source, transportation mode, and personnel rotation significantly impacted the positive detection rate or time of blood culture.
Blood Culture/statistics & numerical data* ; Humans ; Retrospective Studies ; Emergency Service, Hospital/statistics & numerical data*

T-cell acute lymphoblastic leukemia (T-ALL) is a highly aggressive hematologic malignancy with a poor prognosis, despite advancements in treatment. Many patients struggle with relapse or refractory disease. Investigating the role of the super-enhancer (SE) regulated gene ubiquitin-specific protease 20 (USP20) in T-ALL could enhance targeted therapies and improve clinical outcomes. Analysis of histone H3 lysine 27 acetylation (H3K27ac) chromatin immunoprecipitation sequencing (ChIP-seq) data from six T-ALL cell lines and seven pediatric samples identified USP20 as an SE-regulated driver gene. Utilizing the Cancer Cell Line Encyclopedia (CCLE) and BloodSpot databases, it was found that USP20 is specifically highly expressed in T-ALL. Knocking down USP20 with short hairpin RNA (shRNA) increased apoptosis and inhibited proliferation in T-ALL cells. In vivo studies showed that USP20 knockdown reduced tumor growth and improved survival. The USP20 inhibitor GSK2643943A demonstrated similar anti-tumor effects. Mass spectrometry, RNA-Seq, and immunoprecipitation revealed that USP20 interacted with hypoxia-inducible factor 1 subunit alpha (HIF1A) and stabilized it by deubiquitination. Cleavage under targets and tagmentation (CUT&Tag) results indicated that USP20 co-localized with HIF1A, jointly modulating target genes in T-ALL. This study identifies USP20 as a therapeutic target in T-ALL and suggests GSK2643943A as a potential treatment strategy.

The medical mask,which is used as an important tool of preventing the spread of respiratory diseases,can effectively block the transmission of biological aerosols.The detection for the filtration efficiency of bacteria in medical mask is particular importance.The Andersen sampler,is one kind of device that samples microbial aerosols,is widely used in the inspection for the filtration efficiency for bacteria in medical masks.It mainly consists of six impactors with different pore sizes.It simulates the deposition process of the most of particles at different positions in respiratory system through the bacterial particles in biological aerosols impact respectively the surface of petri dishes with agar under different pore sizes.This paper explored the development background,structure and sampling principle,operation and counting procedures of the Andersen sampler,as well as its application and importance in the inspection for the filtration efficiency for bacteria in medical mask.

Objective To identify the multi-dimensional needs of symptom management for oral cancer patients based on the journey map,and provide references for optimizing the symptom management of oral cancer patients.Methods From September 2023 to March 2024,the purposive sampling was used to select 15 perioperative oral cancer patients from a tertiary A general hospital in Zhengzhou for semi-structured interviews.The content analysis method was used to analyze the data and create a patient journey map.Results According to the time axis of diagnosis and treatment,the symptom management of patients with oral cancer was subdivided into 22 themes including identifying abnormal symptoms,clarifying diagnosis,anxiety,fear and uncertainty,guilt,high-risk behavioral inertia solidification,diagnostic trust crisis and so on from 3 dimensions of task,emotion,and pain point,and a journey map was formed.Conclusion The journey of symptom management for patients with oral cancer is long and complex,and the needs of patients'physiological and psychological symptom management are dynamically changing.In the future,the digital intelligence of big data technology can be combined to achieve whole-process,personalized and precise symptom management to improve the quality of life of oral cancer patients.

Objective: To investigate the relationship between pubertal timing and depressive symptoms among high school students in Suzhou, so as to provide scientific evidence for promoting adolescents mental health. Methods: From October 2023 to January 2024, 3 369 students were selected from 20 high schools in Suzhou using stratified cluster random sampling method. Physical examinations and questionnaire surveys were conducted. The Preece & Baines growth Model 1 was used to calculate the age at take off of height velocity (ATO) and age at peak height velocity (APHV), categorizing students into three groups: early pubertal timing group (< P 15 ), ontime group ( P 15 - P 85 ), and delayed group (> P 85 ). Binary Logistic regression was used to analyze its association with depressive symptoms. Results: The ATO for male and female high school students in Suzhou was (9.35±1.23) and ( 8.12 ±1.52) years old, respectively. The mean APHV was (12.35±0.74) years old for boys and (10.91±0.82) years old for girls. The overall prevalence of depressive symptoms was 34.22%, with no statistically significant gender difference ( χ 2=0.42, P =0.52). Significant differences in depressive symptom prevalence were observed across grade levels, breakfast frequency, weekly days of moderate to vigorous physical activity, daily sleep duration, history of school bullying, and the presence of Internet addiction ( χ 2=5.03-69.21, all P < 0.05 ). After adjusting for age, body mass index, region, boarding status, breakfast frequency, weekly moderate to vigorous physical activity days, sleep duration, campus bullying, and presence of Internet addiction, Logistic regression analysis revealed that when ATO was used to evaluate pubertal timing, the risk of depressive symptoms in the delayed group of boys was 1.65 times that of the on time group (95% CI =1.24-2.19); when APHV was used to evaluate pubertal timing, the risks of depressive symptoms in the early pubertal timing group and delayed group of boys were 1.43 times (95% CI =1.07-1.91) and 1.41 times (95% CI =1.05-1.88) of that of the on time group, respectively (all P <0.05). No statistically significant associations were found among females (all P > 0.05 ). Conclusion The prevalence of depressive symptoms among high school students in Suzhou is relatively high, and both early and delayed puberty timing in boys are associated with depressive symptoms.