In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

By systematically combing ancient and modern literature， this paper examined Tribuli Fructus and Astragali Complanati Semen（ACS） used in the famous classical formulas from the aspects of name， origin， production area， harvesting and processing， clinical efficacy， so as to provide a basis for the development of famous classical formulas containing such medicinal materials. The results showed that the names of Tribuli Fructus in the past dynasties were mostly derived from its morphology， and there were nicknames such as Baijili， Cijili and Dujili. The name of ACS in the past dynasties were mostly originated from its production areas， and there were nicknames such as Baijili， Shayuan Jili and Tongjili. Because both of them had the name of Baijili， confusion began to appear in the Song dynasty. In ancient and modern times， the main origin of Tribuli Fructus were Tribulus terrestris， and ancient literature recorded the genuine producing areas of Tribuli Fructus was Dali in Shaanxi and Tianshui in Gansu， but today it is mainly cultivated in Anhui and Shandong. The fruit is the medicinal part， harvested in autumn throughout history. There is no description of the quality of Tribuli Fructus in ancient times， and the plump， firm texture， grayish-white color is the best in modern times. Traditional processing methods for Tribuli Fructus included stir-frying and wine processing， while modern commonly used is purified， fried and salt-processed. The ancient records of Tribuli Fructus were spicy， bitter， and warm in nature， with modern research adding that it is slightly toxic. The main effects of ancient and modern times include treating wind disorders， improving vision， promoting muscle growth， and treating vitiligo. The mainstream base of ACS used throughout history is Astragalus complanatus. Ancient texts indicated ACS primarily originated from Shaanxi province. Today， the finest varieties come from Tongguan and Dali in Shaanxi. The medicinal part is the seed， traditionally harvested in autumn. Modern harvesting occurs in late autumn or early winter， followed by sun-drying. Ancient texts valued seeds with a fragrant aroma as superior， while modern standards prioritize plump， uniform and free of impurities. Traditional processing methods for ACS included frying until blackened and wine-frying， while modern practice commonly employs purification methods. In terms of medicinal properties， the ancient and modern records are sweet and warm in nature. Due to originally classified under Tribuli Fructus， its effects were thus regarded as equivalent to those of Tribuli Fructus， serving as the medicine for treating wind disorders， additional functions included tonifying the kidneys and treating vitiligo. The present record of its efficacy is to tonify the kidney and promote Yang， solidify sperm and reduce urine， nourish the liver and brighten the eye， etc. Based on the textual research results， it is suggested that when developing the famous classical formulas of Tribuli Fructus medicinal materials， we should pay attention to the specific reference object of Baijili， T. terrestris and A. complanatus should be identified and selected， and the processing method should be in accordance with the requirements of the formulas.

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

A microchannel-based electrochemiluminescence(ECL)sensor was developed for detection of tetracycline(TC)utilizing luminol/H2O2 as ECL reporting system.The low excitation potential of luminol/H2O2 effectively mitigated the impact of clamping voltage,thereby enhancing the detection performance of the microchannel-based ECL sensor.The microchannel modified with TC aptamer selectively recognized and captured target TC.The positively charged TC reduced the surface charge density within the microchannel,thereby increasing the ionic current in the microchannel,leading to change of ECL signal of system.The experimental conditions such as electrolyte concentration,TC-aptamer concentration,and reaction time between TC and TC-aptamer were optimized.Under optimal conditions,the difference of ECL signal in the absence and presence of TC(?ECL)exhibited a good linear relationship with TC concentration in the range from 1.00 ng/mL to 200 ng/mL,with a detection limit as low as 0.69 ng/mL.The sensor had good selectivity and was successfully used in detection of TC in milk samples.

Objective:To investigate the incidence of shoulder work-related musculoskeletal disorders (WMSDs) among occupational population in China, and to explore their intrinsic association with personal and work-related factors.Methods:In April 2024, 73497 valid questionnaires of the Chinese version of the Musculoskeletal Disorders Electronic Questionnaire were retrospectively analyzed from June 2018 to December 2023 in 22 provinces and 29 key industries in China, and the general information, occurrence of WMSDs and related risk factors of key occupational populations in different regions in China were collected. By using Chi-square test and confirmatory factor analysis, the relationship between shoulder fatigue and pain in key occupational groups and individual factors, work type, work posture and work organization was discussed, and the internal relationship was analyzed based on structural equation model.Results:Higher incidence of shoulder fatigue and pain were associated with female, lack of physical exercise, uncomfortable working posture and neck leaning forward ( P<0.05). Structural equation model analysis showed that work type, work posture and work organization were strongly correlated ( r=0.58, 0.55). Work organization and work type were strongly correlated with shoulder fatigue ( r=0.65) and moderately correlated with shoulder fatigue ( r=0.21). Shoulder fatigue was moderately associated with shoulder pain ( r=0.40). Individual factors, work type, work posture and shoulder fatigue could directly affect shoulder pain ( OR=0.07, -0.09, 0.17 and 0.40), and work type and work posture could also indirectly affect shoulder pain through shoulder fatigue ( OR=0.08, 0.03). Work organization only indirectly affected shoulder pain through shoulder fatigue ( OR=0.26) . Conclusion:The main influencing factor of shoulder pain is shoulder fatigue, followed by work posture and individual factors. Structural equation model can better reflect the complex relationship between work type, work posture and work organization and shoulder WMSDs. Improving work posture and work organization may be an effective way to control the influence of shoulder fatigue on shoulder pain.

Objective:To explore the structural equation model to explore the levels of work-related musculoskeletal disorders (WMSDs) and various risk factors in the feet and ankle of China's occupational population, providing scientific basis for for preventing WMSDs in feet and ankles.Methods:Data of 73497 national occupational epidemiological cases were selected from June 2018 to December 2023 used the Chinese version of the Electronic Questionnaire on Musculoskeletal Disorders. The adverse ergonomic factors and their source classification standard and confirmatory factor analysis were used to investigate foot and ankle WMSDs and their related risk factors (including individual factors, work organization, work posture, work type, fatigue, etc.) in key occupational groups in China, and structural equation model hypothesis, fitting, verification, and path and intermediary effect analysis were carried out. The model fit evaluation indexes included Chi-square specific degrees of freedom ( χ2/ df), gauge fit index (NFI), Tucker Lewis index (TLI), goodness of Fit index (GFI), adjusted Goodness of Fit index (AGFI) and approximate root mean square error (RMSEA) . Results:A total of 73497 occupational workers were surveyed, with local muscle fatigue and WMSDs incidence rates in the feet and ankles being 17.17% and 12.06%, respectively. The fitting index of the adjusted structural equation model basically meets the standard (GFI=1, AGFI=1, RMESA=0.042, NFI=0.716, TLI=0.663). The top three factors affecting feet and ankle WMSDs are feet and ankle muscle fatigue, work type, and work organization, with standardized path coefficients of 0.221, 0.105, and 0.095, respectively. The top two factors affecting feet and ankle muscle fatigue are work organization and work type, with standardized path coefficients of 0.548 and 0.383, respectively. Feet and ankle muscle fatigue, work type, work organization, and work posture have a direct effect on feet and ankle WMSDs, with effect values of 0.221, 0.105, 0.095, and 0.077, respectively. The organization and type of work can also have indirect effects through feet and ankle muscle fatigue, with effect values of 0.121 and 0.084, respectively.Conclusion:Feet and ankle muscle fatigue has a direct impact on WMSDs, and plays a mediating role between ankle and ankle WMSDs caused by work organization and work type. Feet and ankle muscle fatigue is an important pathway leading to feet and ankle WMSDs. It is recommended that employers and managers detect job fatigue early and take corresponding prevention and intervention measures, which can play a key role in preventing feet and ankle WMSDs.

Objective:To explore the structural relationship between WMSDs in the upper limbs and various risk factors in the occupational population in China, based on a large sample epidemiological survey and structural equation analysis, and to establish a structural equation model, so as to lay a foundation for the prevention and control of such diseases.Methods:The Chinese version of the Musculoskeletal Disorders Electronic Questionnaire was used to conduct a nationwide survey on the prevalence of WMSDs in the upper extremity. Six factors related to WMSDs in the upper extremity were extracted by the classification standard of adverse ergonomic factors and their source and confirmatory factor analysis, including work organization, work type, upper extremity work posture, individual factors, upper extremity fatigue and upper extremity WMSDs. The structural equation analysis was carried out and the structural equation model was established.Results:The incidence of WMSDs and fatigue in the upper limbs was 24.44% and 43.76%, respectively. The adjusted structural equation model fitting indicators were generally up to the standard (GFI=1.000, AGFI=1.000, RMSEA=0.043, NFI=0.808, TLI=0.784) . The four exogenous latent variables of work organization, work type, upper limb work posture and individual factors were correlated. There was a strong positive correlation between job type and upper limb work posture ( r=0.865) , a moderate positive correlation between work organization and job type and upper limb work posture ( r=0.570, 0.490) , and a weak negative correlation between individual factors and the other three exogenous latent variables. Upper limb work posture and individual factors had direct effects on upper limb WMSDs, and the effect coefficients were 0.10 and 0.06, respectively. Upper limb fatigue played a mediating role between work organization, work type, upper limb work posture and upper limb WMSDs. The effect coefficient was 0.46, and the composition ratios of indirect effects were 100.0%, 100.0%, and 38.3%, respectively. The direct path effect of upper limb work posture, individual factors and upper limb WMSDs was weaker than the mediating path through upper limb fatigue. Conclusion:When carrying out the prevention and control of upper limbWMSDs, it is necessary to comprehensively consider the pathogenesis path of upper limb muscle fatigue and upper limb WMSDs caused by work organization, work type, and upper limb work posture, so as to provide theoretical reference for improving the prevention and control level of such diseases.

Objective:To investigate the incidence of shoulder work-related musculoskeletal disorders (WMSDs) among occupational population in China, and to explore their intrinsic association with personal and work-related factors.Methods:In April 2024, 73497 valid questionnaires of the Chinese version of the Musculoskeletal Disorders Electronic Questionnaire were retrospectively analyzed from June 2018 to December 2023 in 22 provinces and 29 key industries in China, and the general information, occurrence of WMSDs and related risk factors of key occupational populations in different regions in China were collected. By using Chi-square test and confirmatory factor analysis, the relationship between shoulder fatigue and pain in key occupational groups and individual factors, work type, work posture and work organization was discussed, and the internal relationship was analyzed based on structural equation model.Results:Higher incidence of shoulder fatigue and pain were associated with female, lack of physical exercise, uncomfortable working posture and neck leaning forward ( P<0.05). Structural equation model analysis showed that work type, work posture and work organization were strongly correlated ( r=0.58, 0.55). Work organization and work type were strongly correlated with shoulder fatigue ( r=0.65) and moderately correlated with shoulder fatigue ( r=0.21). Shoulder fatigue was moderately associated with shoulder pain ( r=0.40). Individual factors, work type, work posture and shoulder fatigue could directly affect shoulder pain ( OR=0.07, -0.09, 0.17 and 0.40), and work type and work posture could also indirectly affect shoulder pain through shoulder fatigue ( OR=0.08, 0.03). Work organization only indirectly affected shoulder pain through shoulder fatigue ( OR=0.26) . Conclusion:The main influencing factor of shoulder pain is shoulder fatigue, followed by work posture and individual factors. Structural equation model can better reflect the complex relationship between work type, work posture and work organization and shoulder WMSDs. Improving work posture and work organization may be an effective way to control the influence of shoulder fatigue on shoulder pain.

Objective:To explore the structural equation model to explore the levels of work-related musculoskeletal disorders (WMSDs) and various risk factors in the feet and ankle of China's occupational population, providing scientific basis for for preventing WMSDs in feet and ankles.Methods:Data of 73497 national occupational epidemiological cases were selected from June 2018 to December 2023 used the Chinese version of the Electronic Questionnaire on Musculoskeletal Disorders. The adverse ergonomic factors and their source classification standard and confirmatory factor analysis were used to investigate foot and ankle WMSDs and their related risk factors (including individual factors, work organization, work posture, work type, fatigue, etc.) in key occupational groups in China, and structural equation model hypothesis, fitting, verification, and path and intermediary effect analysis were carried out. The model fit evaluation indexes included Chi-square specific degrees of freedom ( χ2/ df), gauge fit index (NFI), Tucker Lewis index (TLI), goodness of Fit index (GFI), adjusted Goodness of Fit index (AGFI) and approximate root mean square error (RMSEA) . Results:A total of 73497 occupational workers were surveyed, with local muscle fatigue and WMSDs incidence rates in the feet and ankles being 17.17% and 12.06%, respectively. The fitting index of the adjusted structural equation model basically meets the standard (GFI=1, AGFI=1, RMESA=0.042, NFI=0.716, TLI=0.663). The top three factors affecting feet and ankle WMSDs are feet and ankle muscle fatigue, work type, and work organization, with standardized path coefficients of 0.221, 0.105, and 0.095, respectively. The top two factors affecting feet and ankle muscle fatigue are work organization and work type, with standardized path coefficients of 0.548 and 0.383, respectively. Feet and ankle muscle fatigue, work type, work organization, and work posture have a direct effect on feet and ankle WMSDs, with effect values of 0.221, 0.105, 0.095, and 0.077, respectively. The organization and type of work can also have indirect effects through feet and ankle muscle fatigue, with effect values of 0.121 and 0.084, respectively.Conclusion:Feet and ankle muscle fatigue has a direct impact on WMSDs, and plays a mediating role between ankle and ankle WMSDs caused by work organization and work type. Feet and ankle muscle fatigue is an important pathway leading to feet and ankle WMSDs. It is recommended that employers and managers detect job fatigue early and take corresponding prevention and intervention measures, which can play a key role in preventing feet and ankle WMSDs.