Apical microsurgery is accurate and minimally invasive, produces few complications, and has a success rate of more than 90%. However, due to the lack of awareness and understanding of apical microsurgery by dental general practitioners and even endodontists, many clinical problems remain to be overcome. The consensus has gathered well-known domestic experts to hold a series of special discussions and reached the consensus. This document specifies the indications, contraindications, preoperative preparations, operational procedures, complication prevention measures, and efficacy evaluation of apical microsurgery and is applicable to dentists who perform apical microsurgery after systematic training.
Microsurgery/standards* ; Humans ; Apicoectomy ; Contraindications, Procedure ; Tooth Apex/diagnostic imaging* ; Postoperative Complications/prevention & control* ; Consensus ; Treatment Outcome

Pulpotomy, which belongs to vital pulp therapy, has become a strategy for managing pulpitis in recent decades. This minimally invasive treatment reflects the recognition of preserving healthy dental pulp and optimizing long-term patient-centered outcomes. Pulpotomy is categorized into partial pulpotomy (PP), the removal of a partial segment of the coronal pulp tissue, and full pulpotomy (FP), the removal of whole coronal pulp, which is followed by applying the biomaterials onto the remaining pulp tissue and ultimately restoring the tooth. Procedural decisions for the amount of pulp tissue removal or retention depend on the diagnostic of pulp vitality, the overall treatment plan, the patient's general health status, and pulp inflammation reassessment during operation. This statement represents the consensus of an expert committee convened by the Society of Cariology and Endodontics, Chinese Stomatological Association. It addresses the current evidence to support the application of pulpotomy as a potential alternative to root canal treatment (RCT) on mature permanent teeth with pulpitis from a biological basis, the development of capping biomaterial, and the diagnostic considerations to evidence-based medicine. This expert statement intends to provide a clinical protocol of pulpotomy, which facilitates practitioners in choosing the optimal procedure and increasing their confidence in this rapidly evolving field.
Humans ; Calcium Compounds/therapeutic use* ; Consensus ; Dental Pulp ; Dentition, Permanent ; Oxides/therapeutic use* ; Pulpitis/therapy* ; Pulpotomy/standards*

Intentional tooth replantation (ITR) is an advanced treatment modality and the procedure of last resort for preserving teeth with inaccessible endodontic or resorptive lesions. ITR is defined as the deliberate extraction of a tooth; evaluation of the root surface, endodontic manipulation, and repair; and placement of the tooth back into its original socket. Case reports, case series, cohort studies, and randomized controlled trials have demonstrated the efficacy of ITR in the retention of natural teeth that are untreatable or difficult to manage with root canal treatment or endodontic microsurgery. However, variations in clinical protocols for ITR exist due to the empirical nature of the original protocols and rapid advancements in the field of oral biology and dental materials. This heterogeneity in protocols may cause confusion among dental practitioners; therefore, guidelines and considerations for ITR should be explicated. This expert consensus discusses the biological foundation of ITR, the available clinical protocols and current status of ITR in treating teeth with refractory apical periodontitis or anatomical aberration, and the main complications of this treatment, aiming to refine the clinical management of ITR in accordance with the progress of basic research and clinical studies; the findings suggest that ITR may become a more consistent evidence-based option in dental treatment.
Humans ; Tooth Replantation/methods* ; Consensus ; Periapical Periodontitis/surgery*

Objective To observe the effect of wrist-hand orthosis combined with modified constraint-induced movement therapy(mCIMT)on upper limb and hand function in patients with stroke. Methods From February,2022 to December,2023,32 patients after stroke in Huashan Hospital,Fudan University were randomly assigned to control group(n=16)and experimental group(n=16).Both groups underwent routine re-habilitation,and wore constraint glove almost four hours a day.The experimenal group wore dynamic wrist-hand orthosis four hours everyday,additionally;five days every week,for three weeks.They were evaluated with Wolf Motor Function Test(WMFT),Action Reach Arm Test(ARAT),the strength of gripping,Amount of Use(AOU)and Quality of Movement(QOM)of Motor Activity Log(MAL),Hamilton Anxiety Scale(HAMA)and Hamil-ton Depression Scale(HAMD)before and after treatment,while root mean square ratio of affected/healthy exten-sor muscle of wrist was measured with surface electromyography Results After treatment,the scores of WMFT,ARAT,MAL-QOM,HAMA and the root mean square ratio of affected/healthy extensor muscle of wrist improved in both groups(|t|＞2.179,P＜0.05),and the improvement of WMFT score and the strength of gripping was greater in the experimental group than in the control group(|t|＞2.343,P＜0.05);the strength of gripping,the scores of MAL-AOU and HAMD improved in the experimental group(|t|＞2.819,P＜0.05). Conclusion mCIMT assisted with dynamic wrist-hand orthosis could improve upper limb and hand function in stroke pa-tients.

With the advent of big data era and improvement of computer performance, the artificial intelligence (AI) technology has rapidly boosted in the field of stomatology. Dental caries is one of the cutting-edge research domains in stomatology. The application of AI in dental caries is expected to promote intelligent, precise and high-efficient diagnosis and treatment of caries. This article focuses on the application of AI in medical-aided diagnosis, treatment and risk prediction of caries and discusses their challenges.

Endodontic diseases are a kind of chronic infectious oral disease.Common endodontic treatment concepts are based on the removal of inflamed or necrotic pulp tissue and the replacement by gutta-percha.However,it is very essential for endodontic treatment to debride the root canal system and prevent the root canal system from bacterial reinfection after root canal therapy(RCT).Recent research,encompassing bacterial etiology and advanced imaging techniques,contributes to our understanding of the root canal system's anatomy intricacies and the technique sensitivity of RCT.Success in RCT hinges on factors like patients,infection severity,root canal anatomy,and treatment techniques.Therefore,improving disease management is a key issue to combat endodontic diseases and cure periapical lesions.The clinical difficulty assessment system of RCT is established based on patient conditions,tooth conditions,root canal configuration,and root canal needing retreatment,and emphasizes pre-treatment risk assessment for optimal outcomes.The findings suggest that the presence of risk factors may correlate with the challenge of achieving the high standard required for RCT.These insights contribute not only to improve education but also aid practitioners in treatment planning and referral decision-making within the field of endodontics.

Chemical cleaning and disinfection are crucial steps for eliminating infection in root canal treatment.However,irrigant selection or irrigation procedures are far from clear.The vapor lock effect in the apical region has yet to be solved,impeding irrigation efficacy and resulting in residual infections and compromised treatment outcomes.Additionally,ambiguous clinical indications for root canal medication and non-standardized dressing protocols must be clarified.Inappropriate intracanal medication may present side effects and jeopardize the therapeutic outcomes.Indeed,clinicians have been aware of these concerns for years.Based on the current evidence of studies,this article reviews the properties of various irrigants and intracanal medicaments and elucidates their effectiveness and interactions.The evolution of different kinetic irrigation methods,their effects,limitations,the paradigm shift,current indications,and effective operational procedures regarding intracanal medication are also discussed.This expert consensus aims to establish the clinical operation guidelines for root canal irrigation and a position statement on intracanal medication,thus facilitating a better understanding of infection control,standardizing clinical practice,and ultimately improving the success of endodontic therapy.

Endo-periodontal lesions(EPLs)involve both the periodontium and pulp tissue and have complicated etiologies and pathogenic mechanisms,including unique anatomical and microbiological characteristics and multiple contributing factors.This etiological complexity leads to difficulties in determining patient prognosis,posing great challenges in clinical practice.Furthermore,EPL-affected teeth require multidisciplinary therapy,including periodontal therapy,endodontic therapy and others,but there is still much debate about the appropriate timing of periodontal therapy and root canal therapy.By compiling the most recent findings on the etiology,pathogenesis,clinical characteristics,diagnosis,therapy,and prognosis of EPL-affected teeth,this consensus sought to support clinicians in making the best possible treatment decisions based on both biological and clinical evidence.

ObjectiveTo clarify the feasibility of the 3D scanning volume method for distal upper limb volume measurement, and to analyze its scorer reliability and criterion-related validity. MethodsFrom January to March, 2022, a therapist (operator A) who had not been exposed to 3D scanning volume method and water displacement method was trained to use a handheld 3D laser scanner and a spilt cup to measure the volume of a PVC distal upper limb model. The operation time of 30 operations of each method was recorded. The learning curves of the two methods were plotted using cumulative sum (CUSUM) analysis. The curve was cut into the learning stage and the mastery stage by the vertex of peak. The times required to reach the mastery stage and the operation time of the mastery stage for the two methods were recorded. A total of 20 healthy subjects were recruited from Huashan Hospital of Fudan University. Two trained therapists (operator A and operator B) measured the bilateral distal upper limb volume using a handheld 3D laser scanner, and operator A measured the bilateral distal upper limb volume using a spilt cup. ResultsThe fitting learning curve of the 3D scanning volume method (R² = 0.984) reached its peak after eight times of operation; while that of the water displacement method (R² = 0.494) reached its peak after five times of operation. At mastery stage, the operator spent less time using 3D scanning volume method than using water displacement method (P < 0.05). The intraclass correlation coefficient between the two operators were both 0.979 for bilateral distal upper limb volume measure (P < 0.001). The Pearson coefficients was above 0.979 between 3D scanning volume method and water displacement method (P < 0.001). ConclusionA therapist can master the use of the 3D scanning volume method after eight times of operation, and the operation time of 3D scanning volume method is shorter than that of water displacement method at mastery stage. The 3D scanning volume method is well reliable and valid, that can be used as an alternative to the water displacement method for distal upper limb volumetric measurement.

Digital guided therapy (DGT) has been advocated as a contemporary computer-aided technique for treating endodontic diseases in recent decades. The concept of DGT for endodontic diseases is categorized into static guided endodontics (SGE), necessitating a meticulously designed template, and dynamic guided endodontics (DGE), which utilizes an optical triangulation tracking system. Based on cone-beam computed tomography (CBCT) images superimposed with or without oral scan (OS) data, a virtual template is crafted through software and subsequently translated into a 3-dimensional (3D) printing for SGE, while the system guides the drilling path with a real-time navigation in DGE. DGT was reported to resolve a series of challenging endodontic cases, including teeth with pulp obliteration, teeth with anatomical abnormalities, teeth requiring retreatment, posterior teeth needing endodontic microsurgery, and tooth autotransplantation. Case reports and basic researches all demonstrate that DGT stand as a precise, time-saving, and minimally invasive approach in contrast to conventional freehand method. This expert consensus mainly introduces the case selection, general workflow, evaluation, and impact factor of DGT, which could provide an alternative working strategy in endodontic treatment.
Humans ; Consensus ; Endodontics/methods* ; Tooth ; Printing, Three-Dimensional ; Dental Care ; Cone-Beam Computed Tomography ; Root Canal Therapy