Objective To evaluate the feasibility of intravesical instillation of urokinase and heparin sodium in the treatment of bladder clot irrigation.Methods This report discusses the diagnosis and treatment of three patients with bladder blood clot tamponade confirmed by abdominal and pelvic computed tomography(CT)scans enrolled from our hospital during Jun. to Sep. 2024, and discuss the relevant literature.Results A solution containing urokinase(20 000 IU)and heparin sodium(125 000 U)was instilled through a three-way catheter and retained for 30 minutes before drainage. Complete clot dissolution was achieved in all cases, with immediate relief of hypogastric distension and pain. Post-procedural CT showed restored bladder lumen patency. Hemoglobin levels decreased by 2-5 g/L without complications.Conclusion This preliminary trial demonstrated that intravesical instillation of urokinase-heparin provides a safe and effective minimally invasive alternative for bladder clot in irrigation cases.

Objective To establish a stable,reliable,and clinically relevant porcine model of endotoxin-induced acute respiratory distress syndrome(ARDS).Methods Ten 8-month-old male Bama minipigs were deeply sedated,followed by invasive mechanical ventilation and electrocardiographic monitoring.Lipopolysaccharide(LPS)was intravenously pumped at 600 μg/(kg·h)for 3 hours,then maintained at 15 μg/(kg·h)thereafter.Dynamic monitoring was performed at five time points after LPS injection(LPS 0,1,3,5,and 8 h),including arterial blood gas analysis and chest computed tomography(CT)scans.Pathological examination of lung tissues obtained via bronchoscopic biopsy(HE staining and transmission electron microscopy)was conducted.These indicators were comprehensively used to evaluate the success of the animal model.Results At 5 hours after LPS administration,8 minipigs developed symptoms such as skin cyanosis,elevated body temperature,and respiratory distress.The oxygenation index decreased to<300 mmHg.Chest CT scans showed diffuse pulmonary infiltrates.Histopathology revealed alveolar edema and hyaline membrane formation.Transmission electron microscopy demonstrated disruption of pulmonary blood-air barrier,depletion of lamellar bodies in type Ⅱ pneumocytes,inflammatory cell infiltration,and exudation of plasma proteins and fibrin.Compared with LPS 0 h,at LPS 8 h,the oxygenation index and arterial blood pH were significantly decreased(P<0.001),while blood lactic acid and serum potassium were significantly increased(P<0.05);serum calcium and base excess were significantly decreased(P<0.05),and the lung injury score based on HE-stained lung sections was significantly increased(P<0.01).Conclusion The porcine ARDS model established by continuous LPS injection can dynamically simulate the pathophysiological characteristics and typical pathological manifestations of clinical septic ARDS,making it an effective tool to study the pathogenesis,prevention,and treatment strategies of septic ARDS.

Objective To explore the feasibility and corresponding implementation methods of constructing a sample resource bank based on individual-level data of completed clinical trials and using it to construct external controls for drug/device clinical trials.Methods Taking the pre-marketing clinical trial of transcatheter active valve replacement(TAVR)for the treatment of aortic valve stenosis as an example,the individual-level databases of multiple trials were standardized to form a sample bank.The original data of any trial in the sample bank were selected as the experimental group,and the remaining samples were selected as the control group.The potential confounding was handled by using the propensity score matching and stratification methods to clarify the process of constructing external controls based on the sample bank of individual-level data of clinical trials.Results This study included individual-level data of single-group trials of 4 TAVR devices,with a total of 569 subjects(59.2%male).The number of subjects in Trials 1 to 4 was 120,120,163,and 166,respectively.Propensity score matching enabled the matching of 113,117,125,and 147 subjects with comparable or similar characteristics from individual-level data from other trials,respectively,demonstrating a high matching success rate.The PS score distribution plot after stratification showed that the proportions of subjects in the experimental and control groups in strata 1 to 5 in scheme 1 were 4/103,11/103,22/92,32/87,and 51/64,respectively.For all constructed external controlled trials,a certain number of control samples with similar baseline characteristics to the experimental groups were distributed within each propensity score stratum.The results of the simulation test also reflected the potential differences between different devices in the 12-month all-cause mortality rate.Conclusions The sample bank constructed with individual-level data from clinical trials,as a high-quality data source,can serve as a source of external control for single-arm trials in the same field,and as a useful supplement to the external control scenario of real-world evidence to support drug and device development.At the same time,targeted research on research methods and bias control measures in related fields is also needed.

AIM To establish LC-MS and GC-MS method and analyze the chemical constituents of Dendrobium huoshanense C.Z.Tang & S.J.Cheng flowers.METHODS LC-MS was performed on a Zorbax Eclipse C18 column(2.1 mm×100 mm,1.8 μm),with the mobile phase comprising of water(containing 0.1％formic acid)-acetonitrile flowing at 0.3 mL/min,and electrospray ionization was operated in both positive and negative ion modes.The GC-MS employed headspace solid-phase microextraction for sample preparation,and the analysis was performed on an HP-5MS column(30 m×0.25 mm,0.25 μm),with the following temperature program:initial temperature 50 ℃(held for 2 min),increased at 5 ℃/min to 180 ℃(held for 5 min),then raised at 10 ℃/min to 250 ℃(held for 5 min),and electron impact ion source was employed.RESULTS A total of 62 compounds were identified by LC-MS,including 35 flavonoids,4 coumarins,6 alkaloids,6 terpenoids,3 amino acids,2 polyphenols,2 ketones and 4 others.A total of 101 volatile components were identified by GC-MS,including ketones,aldehydes,alcohols,esters,ethers,and acid.CONCLUSION This method can comprehensively analyze the chemical constituents of D.huoshanense flowers,and provide a scientific basis for elucidating its pharmacodynamic material basis.

To analyze the epidemiological characteristics of COVID-19 in Fujian Province from the 49th week of 2022 to the 5th week of 2023,after further optimization of China's COVID-19 prevention and control measures on December 7,2022(the 49th week of 2022),this study used multi-dimensional surveillance data to dynamically assess population infection levels and their changing trends.The aim of the study was to provide a scientific basis for early warning of epidemic risk,medical resource allocation,and evalu-ation of socio-economic impact.A multi-source data surveillance system was constructed,encompassing surveillance of fever clinics at medical institutions(weekly collection of visits,positive nucleic acid and antigen test results,inpatients,and severe cases in sec-ondary or above hospitals),population nucleic acid test monitoring(weekly person-times and positivity rates of single-tube tests from the provincial system),sentinel hospital monitoring(weekly proportion of influenza-like illness visits at 18 sentinel hospitals and re-lated viral testing data),and monitoring of novel coronavirus variants(weekly systematic collection of genomic sequences of local and imported cases).Line charts were plotted weekly,and time series analysis,molecular epidemiological methods,and an improved SEIAR model were used to simulate epidemic spread.During the study period,the COVID-19 epidemic in Fujian Province exhibited three distinct stages.In the infection peak stage(52nd week of 2022),the provincial fever clinic visits reached 606 893 person-times,and a 49.2%positivity rate in population single-tube nucleic acid tests and 63.8%positivity rate in sentinel hospital monitoring were observed.In the medical load peak stage(2nd week of 2023),274 460 inpatients and 28 487 severe cases were recorded.In the epidemic decline stage(4th to 5th weeks of 2023),fever clinic visits decreased by 96.3%with respect to the peak,the single-tube nucleic acid test positivity rate decreased to 6.3%,and the sentinel hospital COVID-19 nucleic acid test positivity rate was 6.4%.All 508 sequenced local cases were Omicron variants,predominantly BA.5.2 and its sub-lineages(67.4%).Among 56 imported se-quenced cases,BA.5.2 and its sub-lineages accounted for 50.0%,and 16.1%comprised nine variants of interest including XBB and BQ.The model predicted the infection peak in the 52nd week of 2022,whereas the hospitalization peak lagged by approximately 10.6 days.Multi-source data monitoring revealed a three-stage development of the COVID-19 epidemic in Fujian.The BA.5.2 strain was dominant during the epidemic.The combination of multi-source monitoring data and modeling provides important references for epi-demic prevention and control,and highlights the need to improve the monitoring system in follow-up.

Hemodynamic monitoring can reflect cardiac function and blood perfusion and is an indispensable monitoring method in clinical practice. Invasive hemodynamic monitoring methods represented by the thermodilution method are limited in their clinical application scope because they require vascular cannulation. Non-invasive hemodynamic monitoring has attracted extensive attention from medical companies and clinicians at home and abroad in recent years due to its advantages such as safety, non-invasiveness, continuous monitoring, simple operation, and low cost. This paper designs a non-invasive hemodynamic monitoring system based on the impedance cardiography, including hardware, algorithm, software design, and performance parameter evaluation. Among them, the hardware part mainly includes a differential high-frequency constant current source stimulation circuit, impedance cardiogram signal acquisition, and ECG signal acquisition circuit. Signal processing includes wave filtering, impedance cardiogram signal calibration, and ECG signal and impedance cardiogram signal feature point recognition. According to the collected impedance cardiogram and ECG signals, hemodynamic parameters such as heart rate (HR), stroke volume (SV), cardiac output (CO), stroke index (SI), cardiac index (CI), and cardiac contractility index (ICON) are calculated based on the Nyboer thoracic cylinder model. After testing, the key technical indicators of the system hardware are better than that of the relevant medical device standards. The system was used to collect impedance cardiogram and ECG signal data from 40 volunteers. The calculated HR, SV, and CO, three important hemodynamic indicators, were compared with the ICONCore non-invasive cardiac output monitor of OSYPKA Medical in Germany. Their Pearson correlation coefficients were 0.992 ( P<0.001), 0.948 ( P<0.001), and 0.933 ( P<0.001), respectively, verifying that the designed system has high accuracy and reliability.
Cardiography, Impedance/methods* ; Humans ; Hemodynamic Monitoring/methods* ; Equipment Design ; Signal Processing, Computer-Assisted ; Hemodynamics ; Algorithms ; Monitoring, Physiologic/methods* ; Electrocardiography

In order to improve the effect of transcranial electrical stimulation treatment and realize personalized treatment for patients with varying severity levels, this paper designed an integrated four-channel EEG recording multimodal transcranial electrical stimulation system. This system can conduct real-time monitoring on EEG and related characteristic analysis before stimulation, in stimulation, and after stimulation. This enables physicians and researchers to resolve real-time brain states, evaluate transcranial electrical stimulation effect, and then artificially adjust the stimulation parameters. After relevant testing and verification, the system can select four stimulation modes: TACS, TDCS, TPCS and TRNS, which can output the constant stimulation current of 0.03 mA accuracy in the range of ±2 mA and the stimulation frequency of low frequency of 0~4 kHz (precision of 0.01 Hz) and high frequency 50~100 kHz, which can obtain more accurate EEG signals under stimulation interference, demonstrating a good market application prospect.
Electroencephalography/methods* ; Transcranial Direct Current Stimulation/instrumentation* ; Humans ; Equipment Design

This paper introduces a 16-channel multimodal high-precision transcranial electrical stimulation system specifically for non-invasive brain stimulation. This system added TMCS mixed four traditional stimulation modes with TACS, TDCS, TPCS and TRNS. By designing a compensated high-precision constant current source, the constant stimulation current with an accuracy of 0.03 mA in the range of ±2 mA and the stimulation frequency of 50~200 kHz with low frequency of 0~4 kHz (high frequency of 0.1 Hz) are realized. In TACS stimulation mode, there are five adjustable wave forms: triangular wave, sine wave, sawtooth wave, square wave and mixed wave. The system has dual closed-loop control overcurrent detection and simultaneous real-time electrode contact impedance detection. After relevant tests and verification, the system has good stimulation accuracy, high safety and reliability. Compared with the existing products at home and abroad, it features lower cost, richer stimulation mode and waveforms, demonstrating a certain market application value.
Transcranial Direct Current Stimulation/instrumentation* ; Equipment Design ; Humans

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

This study was aimed at establishing a method of ultra-fast quantitative PCR for Brucella detection.We used an exogenous recombinant plasmid as the internal reference and targeted the T4SS secretion system,an important Brucella viru-lence factor,to design specific primers and probes.The sensitivity,specificity,and repeatability of this method were evaluated,and a standard curve was constructed.The coincidence rate of detection findings with this method versus quantitative PCR was determined.This method markedly decreased the detection time to only 10 minutes.The standard curve demonstrated a good linear relationship(Y=-3.410 7x+38.357,R2=0.998 5)with a low minimum detection limit of 10 copies/μL.The method exhibited good specificity and did not specifically amplify several common clinical bacteria other than Brucella.The de-tection of three concentrations of positive plasmids yielded coefficients of variation(CVs)of 0.20％to 0.91％,thus demonstra-ting the method's excellent repeatability.Furthermore,140 clinical samples were analyzed concurrently with the fluorescence PCR method,which yielded a 100％compliance rate and consistent results.Our findings indicated that the Brucella ultra-fast quantitative PCR was ultrafast;had high sensitivity,high specificity,and good specificity;and can be used for the clinical de-tection of Brucella and emergency investigation of epidemics.Therefore,this method is valuable for the early diagnosis of Bru-cella.