The aim of this study was to qualitatively and quantitatively detect coronavirus(CoV)in the feces of bats from Qinghua Cave,Yunnan Province,China.CoV was qualitatively tested with reverse transcription polymerase chain reaction(RT-PCR),and homology and genetic evolution were analyzed with bioinformatics software.The established reverse transcription real-time fluores-cence quantitative PCR(qRT-PCR)method was applied to CoV quantification in bat feces.The positivity rate of CoV in 306 fecal samples collected from the fulvous fruit bat(Rousettus leschenaultia)was 7.8%(24/306)according to RT-PCR.All 24 strains of CoV belonged to β-CoV,and showed a similarity of 86.8%-100.0%at the nucleotide level and 95.2%-100.0%at the amino acid level,with respect to other β-CoV sequences in the NCBI database.The positivity rate of CoV was 18.6%(57/306)according to qRT-PCR,a value higher than that according to RT-PCR(χ2=25.3,P<0.05).The mean β-CoV load was 1.3×103 copies/μL.In conclusion,the bats in Qinghua Cave,Yunnan Province,carried CoV belonging to β-CoV.The established qRT-PCR method achieved good sensitiv-ity,accuracy,reproducibility,and a higher detection rate than that of RT-PCR,and can be used for rapid detection of β-CoV in bats.

To develop a novel polyamino acid-based nanohydrogel drug delivery system for dexamethasone to enhance its delivery efficiency to the inner ear.

The aim of this study was to qualitatively and quantitatively detect coronavirus(CoV)in the feces of bats from Qinghua Cave,Yunnan Province,China.CoV was qualitatively tested with reverse transcription polymerase chain reaction(RT-PCR),and homology and genetic evolution were analyzed with bioinformatics software.The established reverse transcription real-time fluores-cence quantitative PCR(qRT-PCR)method was applied to CoV quantification in bat feces.The positivity rate of CoV in 306 fecal samples collected from the fulvous fruit bat(Rousettus leschenaultia)was 7.8%(24/306)according to RT-PCR.All 24 strains of CoV belonged to β-CoV,and showed a similarity of 86.8%-100.0%at the nucleotide level and 95.2%-100.0%at the amino acid level,with respect to other β-CoV sequences in the NCBI database.The positivity rate of CoV was 18.6%(57/306)according to qRT-PCR,a value higher than that according to RT-PCR(χ2=25.3,P<0.05).The mean β-CoV load was 1.3×103 copies/μL.In conclusion,the bats in Qinghua Cave,Yunnan Province,carried CoV belonging to β-CoV.The established qRT-PCR method achieved good sensitiv-ity,accuracy,reproducibility,and a higher detection rate than that of RT-PCR,and can be used for rapid detection of β-CoV in bats.

OBJECTIVE：To comp are the meridian tropism of compatible herbs and compatibility rules of ancient and modern prescriptions containing Eucommia ulmoides ，and to provide theoretical basis for modern clinical application of E. ulmoides . METHODS：Ancient prescriptions containing E. ulmoides were screened from Dictionary of TCM Prescription . The prescriptions containing E. ulmoides were screened from clinical trials which published in CNKI ，Wanfang database and VIP during Jan. 2000 to Jan. 2020. Data mining methods such as frequency statistics and Apriori algorithm were used to analyze the main diseases of ancient and modern prescriptions containing E. ulmoides and the use frequency ，types，meridian tropism and compatibility rules of medical materials. RESULTS ：A total of 84 ancient prescriptions and 188 modern prescriptions of E. ulmoides were included. Ancient prescriptions were mainly used to treat diseases such as back pain ，deficiency，threatened abortion. Modern prescriptions were mainly used to treat osteoarthropathy （mainly lumbar intervertebral disc herniation ），gynecological diseases ，cardiovascular diseases. Cinnamomum cassia ，Angelica sinensis and Achyranthes bidentatawerethe were the high-frequency compatible herbs in ancient prescriptions with E. ulmoides ，and were tonifying medicine ，dispelling wind and dampness medicine and clearing heat medicine；compatible herbs were mainly of warm property ，and the channel tropism was mostly kidney meridian and liver meridian；the five tastes of compatible herbs were mainly sweet and spicy. A. sinensis ，Glycyrrhiza uralensis and Rehmanniae Radix Praeparata were the high-frequency compatible herbs in modern prescriptions with E. ulmoides ，and were mainly tonic medicine，anti-rheumatic medicine ，medicine for promoting blood circulation and removing blood stasis ；compatible herbs were mainly of warm property ，and the channel tropism was mostly liver meridian and kidney meridian ；the five tastes of medicine were mainly bitter and spicy. By analyzing the Apriori association rules of high-frequency herbs ，a total of 10 core herbs combinations were obtained in ancient prescriptions ，including 8 third-order association rules and 2 fourth-order association rules ；a total of 11 core herbs combinations were obtained in modern prescriptions ，including 3 third-order association rules and 8 fourth-order association rules. CONCLUSIONS ： Ancient and modern prescriptions containing E. ulmoides are mainly used to treatlumbar disease ， followed by obstetrics and gynecology com diseases. In addition ，the modern prescriptions can also be #used for the treatment of cardiovascular and cerebrovascular diseases. The ancient prescriptions mainly focus on warming and tonifying ，while the modern prescriptions are more compatible with medicine for dispelling wind and dampness and medicine for promoting blood circulation and removing blood stasis on the basis of tonifying deficiency ；most of the medicines in ancient prescriptions contribute in kidney and liver meridians ，mainly sweet and pungent ，while most of the medicines in modern prescriptions contribute in liver meridian ，and are more compatible with bitter medicines.

Objective:To investigate the application of 3D printing technique in percutaneous nephrolithotomy (PCNL) of patients with complicated kidney stones.Methods:From January 2015 to December 2017, 60 patients with complicated kidney stones were enrolled in the First Affiliated Hospital of Hebei North University for prospective study, and PCNL was proposed.All the patients were randomly divided into 3D print group (30 cases) and conventional image inspection group (30 cases, control group). Before operation, CT urography (CTU) was used in both groups.In 3D printing group, digital imaging and communications in medicine (DICOM) files of CT were extracted for 3D image postprocessing, and thermoplastic materials were used to print 3D model.In the 3D printing group, the digital imaging and communications in medicine (DICOM) files of CT were extracted for 3D image post-processing, and the 3D model was printed with thermoplastic materials.According to the comprehensive planning of 3D kidney model, a virtual safe and reliable percutaneous renal access was established for each patient, and PCNL was executed.The patients in the two groups were compared before, during and after operation.Preoperative: age, sex, body mass index, blood creatinine, stone size and CT value.During the operation: (1) the target renal calices location time; (2) the conformity between the preoperative planning and the actual operation; (3) the operation completion time.After operation: (1) stone removal rate; (2) hemoglobin reduction level; (3) postoperative recovery.Results:All the 60 patients successfully completed the operation, 30 patients successfully printed out the 3D model, which can accurately express the relationship between the stone and the adjacent anatomical structure, the internal renal artery and the collecting system.Positioning time of 3D printing group in target renal calices((2.9 ± 1.5) min vs.(5.8 ± 1.7) min, P=0.023), coincidence between simulated and actual puncture calices((89.5 ± 3.5)% vs.(60.2 ± 5.7)%, P=0.005), postoperative stone removal rate ((89.9 ± 4.5)% vs.(75.9 ± 5.2)%, P=0.009), and hemoglobin levels((1.4 ± 0.5) g/L vs.(2.9 ± 1.4) g/L, P=0.032) were superior to the control group, and the difference was statistically significant.But there was no significant difference between the two groups (all P>0.05). Conclusion:The 3D printed kidney model truly restores the anatomical details around the kidneys and stones, providing a stereoscopic and intuitive way to perform surgery, so it maybe has a significance guidance for percutaneous nephrolithotomy.

Objective:To analyze the epidemiological and etiological characteristics of a dengue fever outbreak in Hunan province in 2018.Methods:Real-time PCR assay was performed for the laboratory diagnosis of 8 suspected dengue fever cases. Etiological surveillance was performed in 186 suspected dengue fever cases and fever cases who had close contacts with dengue fever patients. C6/36 cells was used for the virus isolation from acute phase serum. By sequencing the full length of E genes of 15 dengue virus strains, phylogenetic analysis was performed based on the sequences obtained, including reference sequences from the NCBI GenBank database, the serotypes and gene subtypes of the virus were analyzed to trace the possible source of transmission. An emergency monitoring of vector density and a retrospective survey of sero-epidemiology in healthy population were conducted in the epidemic area.Results:In the serum samples of 8 suspected patients, 6 were dengue virus RNA positive, and 4 were NS1 antigen positive. In 186 suspected patients, 96 were dengue virus nucleic acid, NS1 antigen or antibody positive in etiological test. A total of 64 dengue virus strains were isolated. The phylogenetic analysis showed that all the dengue virus strains belonged to type 2, which might be from Guangdong or Zhejiang provinces. The Bretub index was up to 65, indicating an extremely high risk of transmission. The positive rate of the dengue virus IgG antibody was 0.53%(2/377) in retrospective survey of 377 healthy people.Conclusion:The field epidemiologic and the molecular genetics analyses showed the outbreak of dengue fever in Hunan in 2018 was caused by imported cases and dengue virus 2.

Objective To investigate the optimal thresholds of the passing rate with different gamma measurement criteria (percent dose difference/DTA) based on the Delta 4 three-dimensional dosimetric verification system in the verification of volumetric modulated arc-therapy (VMAT) plan for cervical cancer.Methods Thirty clinically-approved dual-arc VMAT plans using the RapidArcTM (Varian Medical Systems Inc.) for cervical cancer were randomly selected.The gamma analysis and dose-volume histogram (DVH) evaluation were performed using Delta 4.All the plans were classified according to the following two criteria:1.If the absolute percentage dose errors of all specific dosimetry indices on the DVH were less than 5％,the plan was regarded as clinically acceptable.2.If the gamma passing rate was 90％ or 95％ under the criteria of 2％/2 mm and 3％/3 mm,the plan was regarded as acceptable.The sensitivity and specificity analyses were conducted based on the classification results and the receiver operating characteristic (ROC) curve was plotted.By calculating the Youden Index,the optimal thresholds under different Gamma criteria (global and local 2％/2 mm and 3％/3 mm) were investigated.Finally,the ability of distinguishing the plan was clinically acceptable or not between the conventional and optimal thresholds was quantitatively compared according to the sensitivity and specificity analyses.Results The optimal thresholds under the global 3％/3 mm and 2％/2 mm criteria were 98.3％ and 87.05％;and 97.55％ 、86.05％ for the local gamma analysis.Compared with the conventional thresholds,the sensitivity of the optimal thresholds was 0.93 by using the global and local gamma analyses under the 3％/3 mm criterion.Under the 2％/2 mm criterion,the sensitivity of the optimal thresholds was 0.65 and the specificity was 0.49 by using the global gamma analysis.The sensitivity was 0.7 and the specificity was 0.46 by using the local gamma analysis,suggesting that the sensitivity and the specificity were more balanced under the 2％/2 mm criterion.Conclusions Application of the optimal thresholds in the verification of VMAT plans can maintain the balance between the sensitivity and specificity,prevent the harm of clinically unacceptable plans to patients to certain extent and reduce the probability of increasing the daily work load for physicists due to the misjudgement of clinically acceptable plans.

Trauma is the leading cause of death for people under 40 years old in the world. At present, the rescue and treatment system of trauma patients in China is not yet well established, and the mortality of trauma patients is higher than those in the developed countries. Improving the treatment system is the key to reducing the trauma mortality. In order to innovate the service mode of trauma first aid, further promote the establishment of regional trauma first aid system, improve the ability of trauma treatment, reduce the mortality and disability rate of trauma patients in Jiangxi Province, recently Health Commission of Jiangxi Province and the First Affiliated Hospital of Nanchang University have reached a consensus on the establishment of Jiangxi trauma first aid center. In order to provide reference for the construction of trauma treatment system, the author analyzes the following aspects including functional positioning, basic requirements, organization management, and evaluation of core indicators.

Objective: To assess clinical and radiographic outcomes of short implants (length six mm) in the posterior region and early-loading with splinted fixed dental prostheses. Methods: Forty-five patients were recruited at 3 centers and 2-3 implants (diameter 4 mm, length 6 mm) were implanted in each case. Totally, ninty-five implants were placed, using one-stage surgery protocol and loaded with a screw-retained splinted fixed prosthesis 6 weeks later. Clinical and radiographic examinations were performed preoperatively, post-surgery, at loading, and 6, 12 and 24 months after prosthesis placement. Results: Four implants were removed before loading. A total of 36 patients with 76 implants completed the whole treatment and 2 year follow-up according to the research design. No implant was lost after loading, and the 2-year survival rate of the implant was 100%(76/76). In all cases, the response of swelling and pain after operation was mild, and the bone resorption around the implants was not obvious at 6 months [(0.04±0.29) mm], 1 year [(-0.11±0.44) mm], and 2 years [(0.00±0.53) mm] after loading. Bone loss less than 1.00 mm was found only in 26% (18/69) implants after 2 years of loading, and the height of the alveolar bone around 17% (12/69) of the implant increased. During 2-year follow-up, the probing depth of the implants increased by nearly 0.50 mm, but there was no clinical significance (P>0.05). Conclusions The 2-year results of this study showed that the 6-mm-long implants can be a predictable procedure, especially in situations with limited bone height in posterior edentulous regions.

Objective To investigate the optimal gamma passing rate of intensity-modulated radiotherapy (IMRT) dosimetric verification in the treatment of esophageal cancer using a three-dimensional dose verification system EDoseTM.Methods Twenty five esophageal cancer patients treated by 7-field IMRT were retrospectively reviewed.Measured dose distribution were reconstructed on CT image and evaluated by gamma analysis and DVH metrics using the EDoseTM system.Plans with DVH metrics dose difference ＜ 5％ or with gamma passing ＞ 90％ under 3％/3 mm criteria were accepted.The optimal gamma passing rate for criteria of 5％/3 mm,3％/3 mm,2％/2 mm were investigated by drawing the receiver operating characteristic (ROC) curves and calculating the Youden Index.The sensitivity and specificity of the these optimal thresholds in the plan verification were also analyzed.Results The optimal thresholds for global gamma indices with 5％/3 mm,3％/3 mm,2％/2 mm were 98.66％,94.84％,78.56％,respectively.In the 90％ common threshold,The sensitivity and specificity for common 90％ threshold and optimal threshold under 3％/3 mm criteria were 0.17 vs.0.85 and t 0.84 vs.0.27,respectively.The sensitivity and specificity were 0.89,0.65 and 0.23,0.47 for optimal thresholds under 5％/3 mm and 2％/2 mm criteria,respectively.Conclusions The sensitivity of optimal threshold gamma passing rate improved significantly compared with the common threshold (90％) at 3％/3 mm criteria.,The sensitivity and the specificity were more balanced at the 2％/2 mm criteria compared with those at 3％/3 mm criteria.