Objective:To evaluate a novel self-designed elbow flexion-extension axis guide that is easy to operate, accurately positioned, and X-ray-free.Methods:This study collected the elbow joint CT scans from 60 normal adults [40 males and 20 females with an age of (38.1±9.3) years] at Department of Orthopedics, The Third Hospital of Xiamen between September and December 2024. The scan images were imported into 3D modeling software for systematic measurement of key anatomical parameters of the distal humerus. The structural design of a novel elbow flexion-extension axis guide was completed based on these measurements, combined with the anatomical data of the distal humerus reported in 6 relevant articles between January 2008 and December 2024 retrieved from the CNKI and PubMed databases. After physical models of the distal humerus from the 60 healthy adults were fabricated using 3D printing technology, they were divided into 2 even groups: a guide-assisted group ( n=30) where the positioning needle was inserted with the assistance of the elbow flexion-extension axis guide and a conventional group ( n=30) where the positioning needle was inserted freehand. The entry deviation, exit deviation, inter-axial angle, inter-axial distance, operation time, and fluoroscopic verifications in positioning of elbow flexion-extension axis were compared between the 2 groups. Results:The guide-assisted group demonstrated significantly smaller values than the conventional group in entry deviation [(1.52±0.70) mm versus (2.29±1.00) mm], exit deviation [(2.83±1.49) mm versus (4.95±1.63) mm], inter-axial angle (3.46°±0.93° versus 6.45°±1.21°), and operation time [(92.0±17.0) s versus (509.5±42.3) s] (all P<0.05). The conventional group required an average of (10.7±2.1) fluoroscopic verifications, while the guide-assisted group eliminated radiation exposure. No statistically significant difference was observed in the inter-axial distance between the 2 methods in positioning of elbow flexion-extension axis ( P>0.05). Conclusion:As the novel self-designed elbow flexion-extension axis guide can improve accuracy in positioning the elbow flexion-extension axis without requiring fluoroscopy, it significantly shortens intraoperative positioning time, and is handy to use.

Objective:To evaluate a novel self-designed elbow flexion-extension axis guide that is easy to operate, accurately positioned, and X-ray-free.Methods:This study collected the elbow joint CT scans from 60 normal adults [40 males and 20 females with an age of (38.1±9.3) years] at Department of Orthopedics, The Third Hospital of Xiamen between September and December 2024. The scan images were imported into 3D modeling software for systematic measurement of key anatomical parameters of the distal humerus. The structural design of a novel elbow flexion-extension axis guide was completed based on these measurements, combined with the anatomical data of the distal humerus reported in 6 relevant articles between January 2008 and December 2024 retrieved from the CNKI and PubMed databases. After physical models of the distal humerus from the 60 healthy adults were fabricated using 3D printing technology, they were divided into 2 even groups: a guide-assisted group ( n=30) where the positioning needle was inserted with the assistance of the elbow flexion-extension axis guide and a conventional group ( n=30) where the positioning needle was inserted freehand. The entry deviation, exit deviation, inter-axial angle, inter-axial distance, operation time, and fluoroscopic verifications in positioning of elbow flexion-extension axis were compared between the 2 groups. Results:The guide-assisted group demonstrated significantly smaller values than the conventional group in entry deviation [(1.52±0.70) mm versus (2.29±1.00) mm], exit deviation [(2.83±1.49) mm versus (4.95±1.63) mm], inter-axial angle (3.46°±0.93° versus 6.45°±1.21°), and operation time [(92.0±17.0) s versus (509.5±42.3) s] (all P<0.05). The conventional group required an average of (10.7±2.1) fluoroscopic verifications, while the guide-assisted group eliminated radiation exposure. No statistically significant difference was observed in the inter-axial distance between the 2 methods in positioning of elbow flexion-extension axis ( P>0.05). Conclusion:As the novel self-designed elbow flexion-extension axis guide can improve accuracy in positioning the elbow flexion-extension axis without requiring fluoroscopy, it significantly shortens intraoperative positioning time, and is handy to use.

Objective:To study the minimally invasive fixation with virtual self-designed screws between the iliac plates for acetabular posterior column fractures and compare the differences between genders.Methods:The CT data were collected from the 80 patients with normal pelvis who had undergone pelvic CT scan due to physical examination or trauma at Department of Orthopaedics, The Third Hospital of Xiamen from June 2021 to June 2022. There were 40 males and 40 females with an age of (45.0±12.4) years. The virtual screws between the minimally invasive iliac plates were designed with design software after 3D modeling. The insertion point, screw length, screw diameter, angle between the screw and the coronal plane of the pelvis, angle between the screw and the sagittal plane of the pelvis, angle ε between the screw and the anterior edge bone crest line of the greater sciatic notch, and bone channel volume were measured. Comparisons of the above data were made between genders. Results:The insertion point of the screw between the minimally invasive iliac plates was located between the anterior superior iliac spine and the iliac tubercle nodule, going toward the area between the ischial spine and the small ischial notch. The screw length was (139.64±8.46) mm, the screw diameter (8.95±1.16) mm, and the bone channel volume (51.91±10.77) cm 3. The screw length [144.34±7.58) mm], screw diameter [9.50±0.98) mm], angle between the screw and the sagittal plane of the pelvis (31.14°±2.74°), and bone channel volume [(57.82±8.82) cm 3] for males were significantly larger than those for females [(134.95±6.48) mm, (8.40±1.07) mm, 26.72°±2.74°, and (46.01±9.22) cm 3], while the angle between the screw and the sagittal plane of the pelvis [(35.74°±3.85°) mm] and angle ε between the screw and the anterior edge bone crest line of the greater sciatic notch (11.96°±4.57°) for males were significantly smaller than those for females (36.89°±2.96° and 14.17°±5.15°) (all P < 0.05). Conclusions:Fixation with screws between the iliac plates provides a new treatment for acetabular posterior column fractures, because the screws can be placed percutaneously in a minimally invasive manner or antegradely. The screw length, screw diameter, angle between the screw and the sagittal plane of the pelvis, and bone channel volume for males are significantly larger than those for females, while the angle between the screw and the sagittal plane of the pelvis and the angle between the screw and the anterior edge bone crest line of the greater sciatic notch for males are significantly smaller than those for females. Therefore, the angles between the iliac plate screw and the sagittal and coronal planes of the pelvis should be adjusted according to gender in screw placement.

【Objective】 To explore the feasibility and efficacy of laparoscopic bladder muscle flap ureteroplasty in the treatment of long-segment injury in the middle and lower ureter and to summarize the clinical experience. 【Methods】 The clinical data of 6 patients treated in our hospital during Oct.2018 and Aug.2021 were retrospectively analyzed. Four of them had long-segment ureteral mucosal cuff-like avulsion during ureteroscopic lithotripsy and could not undergo end-to-end ureteral anastomosis or reimplantation, and then laparoscopic bladder muscle flap ureteroplasty plus lumbaris major fixation of the bladder was performed immediately. The other 2 patients had to undergo this procedure due to stricture. 【Results】 All operations were successful. The median ureteral avulsion or ureteral stricture length was 14.5(6, 16) cm, muscle flap length 16.5(8,18) cm, operation time 190 (160, 240) min, blood loss 175 (100, 250) mL, postoperative hospital stay 8 (7, 12) days, and postoperative creatinine (89.38±21.74) μmoI/L. No major complications occurred. One patient developed urinary leakage, which returned to normal after active glycemic control and nutritional therapy; one patient developed postoperative absorption fever, which recovered after physical cooling. During the follow-up of 6 to 45 months, CT showed mild hydronephrosis in some patients, but no ureteral stenosis, impaired renal function or other complications, and patients complained no subjective discomfort. 【Conclusion】 Laparoscopic bladder muscle flap ureteroplasty is safe and effective for patients with long-segment injury in the middle and lower ureter. It has the advantages of small trauma, few long-term complications, and rapid recovery and improvement of renal function. If necessary, it can be combined with lumbaris major fixation of the bladder to shorten the distance from the muscle flap to the broken end of the ureter and to reduce the tension of the anastomosis.

【Objective】 To compare the efficacy, safety and survival of partial nephrectomy (PN) and radical nephrectomy (RN) in the treatment of clinical T1b and T2a renal cell carcinoma (RCC). 【Methods】 A total of 115 patients with stage T1b and T2a RCC treated during Apr.2014 and Jul.2017 were retrospectively analyzed. According to the different surgical methods, the patients were divided into PN group (n=55) and RN group (n=60). The clinical data and prognosis of the two groups were compared. 【Results】 There were no significant differences in the general clinical data and perioperative related factors between the two groups (P>0.05). The incidence of complications was significantly higher in PN group than in RN group (P=0.024), but there was no significant difference in serious complications (Clavien grade ≥3) (P>0.05). In terms of renal function recovery, there was no significant difference in serum creatinine between the two groups before operation (P>0.05), but the serum creatinine was significantly lower in PN group than in RN group on the 1st day, 3rd, 6th and 12th months after operation (P<0.05). After more than 5 years of follow-up, there was no significant difference in 5-year survival rate, overall survival rate, recurrence and metastasis rate, and cancer specific survival rate between the two groups (P>0.05). 【Conclusion】 Both PN and RN are safe and effective in the treatment of stage T1b and T2a RCC, and can achieve good oncological control effects. Compared with RN, PN can fully and effectively protect the postoperative renal function, but it causes more surgical complications. However, there is no significant difference in severe complications (Clavien grade ≥3).