BACKGROUND:Post and core restoration is a common choice for tooth defects,but the repair effects of various post and core materials are different. OBJECTIVE:To evaluate the stress distribution at the post and core,tooth root,and bonding agent site of post and core models made of different elastic modulus post and core materials using finite element method. METHODS:A three-dimensional root canal treated maxillary central incisor model was built using three-dimensional modeling software,which was restored with a full ceramic crown.The post and core materials in the restoration used nanoceramic resin(elastic modulus=12.8 GPa),composite resin(elastic modulus=16 GPa),hybrid ceramic(elastic modulus=34.7 GPa),glass ceramic(elastic modulus=95 GPa),titanium alloy(elastic modulus=112 GPa),and zirconia(elastic modulus=209.3 GPa).The model was fixed in cortical bone.A 100 N concentrated force of 45° from the long axis of the tooth was applied to 1/3 of the crown and tongue side of the central incisor.The stress distribution of the post and core,dentin,and tooth-root bonding agent in the model was repaired by the maximum principal stress criterion. RESULTS AND CONCLUSION:(1)When the post and core materials with higher elastic modulus was used,the post-core stress in the repair model was more concentrated.When the elastic modulus of the post and core materials(nanoceramic resin and composite resin)was close to dentin,the stress distribution of the post and core was more uniform.The stress distribution of dentin in all restoration models was similar regardless of post and core materials.When the post and core with higher elastic modulus was used,more stress concentration was shown at the post and root bonding agent in the repair model.(2)The maximum stress values at the post and core,tooth root,and the bonding agent site of post and tooth root in the nanoceramic resin model were 31.00,33.21,and 0.51 MPa,respectively.The maximum stress values at the post and core,tooth root,and the bonding agent between the post and tooth root in the composite resin model were 36.84,33.14,and 0.59 MPa,respectively.In the mixed ceramic model,the maximum stress values at the post and core,tooth root,and the bonding agent between the post and tooth root were 64.05,32.83,and 1.00 MPa,respectively.In the glass ceramic model,the maximum stress values at the post and core,tooth root,and the bonding agent between the post and tooth root were 112.30,32.69,and 1.73 MPa,respectively.In the titanium alloy model,the maximum stress values of the post and core,tooth root,and the bonding agent between the post and tooth root were 120.00,32.17,and 1.86 MPa,respectively.In the zirconia model,the maximum stress values of the post and core,tooth root,and the bonding agent between the post and tooth root were 148.80,31.85,and 2.28 MPa,respectively.(3)The higher the elastic modulus of the post and core material,the higher the maximum stress at the post and core during restoration.The elastic modulus of the post and core material had no significant effect on the maximum stress of the dental bonding agent and dentin.

OBJECTIVES: This study aims to evaluate the short- to medium-term clinical efficacy of demineralized dentin matrix (DDM) particles applied during the immediate implantation of alveolar bone defects in the posterior region. METHODS: A total of 76 patients with 110 simple taper retentive implants were included in the conducted study and divided into Groups A and B in accordance with the bone grafting materials. Cone beam computed tomography and panoramic radiographs were taken immediately after implant surgery, immediate crown repair, and final follow-up time. The average follow-up time for Groups A and B was recorded. The primary observed clinical indicators were overall survival rate of the implant, bone resorption of the mesial and distal margins of the implant, buccal bone width resorption at the platform level and 1 mm below the platform, and bone height of the implant. Implant complication was a secondary observed clinical indicator. RESULTS: During the 1-to-5-year follow-up observation period, the mean follow-up of Group A was 38.2 months while that of Group B was 39.9 months. In Group A, two implants failed, one of which fractured, and implant overall survival rate was 96.4%. Four implants failed in Group B due to peri-implantitis, and implant overall survival rate was 92.6%. No statistically significant difference in implant overall survival rate was found between the two groups (P>0.05). In Group A, the average bone resorption in the mesial and distal margins of the implants was (1.011±2.047) mm and (0.841±2.183) mm, respectively. In Group B, the average bone resorption of the mesial and distal margins of the implants was (1.546±1.778) mm and (1.431±1.909) mm, respectively. No statistically significant difference was noted between the two groups (P>0.05). In Group A, buccal bone width resorption at the platform level and 1 mm below the platform of the implant was (0.782±2.084) mm and (0.681±2.307) mm, respectively. In Group B, buccal bone width resorption at the platform level and 1 mm below the platform of implant was (1.071±1.474) mm and (0.949±1.909) mm, respectively. No statistically significant difference was found between the two groups (P>0.05). In Group A, the buccal bone height of resorption of the implant was (1.044±2.214) mm. In Group B, the buccal bone height of resorption of the implant was (1.075±1.456) mm. No statistically significant difference in bone height was observed between the two groups (P>0.05). CONCLUSIONS During the 1-to-5-year follow-up observation period, DDM particles can effectively increase the height and width of alveolar bone, and they can achieve the same effect of maintaining alveolar bone contour and bone augmentation compared with deproteinized inorganic calf bone. DDM particles can be used as a potential new bone grafting material for the treatment of bone defects in clinical practice.
Humans ; Follow-Up Studies ; Dentin ; Cone-Beam Computed Tomography ; Dental Implants ; Male ; Female ; Adult ; Alveolar Bone Loss/surgery* ; Middle Aged ; Bone Transplantation ; Radiography, Panoramic ; Dental Implantation, Endosseous/methods* ; Immediate Dental Implant Loading

OBJECTIVES: To explore the related risk factors of early failure of simple taper retentive implants, and to provide theoretical guidance for clinical work. METHODS: Collect cases of patients who visited the Department of Stomatology of the Fourth Affiliated Hospital of Nanchang University from January 2021 to June 2024, received simple taper retentive implants, and had complete medical records. Taking the implants as the unit, analyze the influence of patient-related factors (gender, age, smoking history, hypertension history, diabetes history), implant-related factors (implant length, implant diameter, implant surface treatment), and surgical-related factors (implant site, implant timing, simultaneous maxillary sinus floor elevation, simultaneous bone augmentation) on the early failure of implants. Univariate analysis and multivariate analysis were adopted to explore the potential risk factors for early failure of simple taper retentive implants. RESULTS: A total of 3,533 simple taper retentive from 1,681 patients were included during the study period. Among them, 53 implants from 49 patients experienced early failure, with an early failure rate of 2.9% at the patient le-vel and 1.5% at the implant level. Multivariate analysis revealed that smoking (OR=2.148, P=0.021), the anterior mandibular region (OR=3.669, P=0.006), and the posterior maxillary region (OR=2.191, P=0.033) were risk factors for early failure of simple taper retentive implants. In the univariate analysis, simultaneous maxillary sinus floor elevation had a higher risk of early failure, but this effects was no longer significant in the multivariate analysis (P>0.05). CONCLUSIONS Smoking, the anterior mandibular region, and the posterior maxillary region are risk factors for the early failure of simple taper retentive implants, and could be comprehensively considered in the preoperative treatment plan.
Humans ; Risk Factors ; Male ; Female ; Middle Aged ; Dental Implants ; Adult ; Smoking/adverse effects* ; Dental Restoration Failure ; Aged

Objective This study aims to evaluate the mid-and long-term clinical efficacies of simple taper retentive implants for immediate placement in chronic apical infected teeth in the posterior region.Methods A total of 36 pa-tients with 41 simple taper retentive implants were included in the study conducted.These patients underwent immediate implant treatment for teeth with chronic apical infection in the posterior region.The soft and hard tissues surrounding the implants were assessed and documented over a period of 5 years following the completion of crown restoration.Re-sults During the 5 years follow-up period,one implant failed with mobility,and the implant survival rate was 97.6％.The mean marginal bone resorption was(-0.74±1.03)mm from the immediate post-implant placement to the immediate post-crown restoration,and the difference in marginal bone heights between the two time points was statistically signifi-cant(P＜0.05).The mean marginal bone resorption was(-0.21±0.70)mm from the immediate post-crown restoration to the 5-year post-crown restoration,and the difference in marginal bone height between the two time points was not statisti-cally significant(P＞0.05).No significant difference(P＞0.05)was observed in bone resorption between mesial and distal,maxillary and mandibular,different tooth posi-tions,and different implant lengths.The soft tissue sur-rounding the implants remained healthy at the 5 years follow-up period,one implant exhibited peri-implantitis,and no mechanical complications were observed.The overall satisfaction of patients was good.Conclusion Immediate place-ment of simple taper retentive implants after thorough debridement of chronic infected alveolar socket in the posterior re-gion can achieve good mid-and long-term clinical outcomes after 5 years of loading.The soft and hard tissues were maintained in a steady state,which expanded the indications for immediate implantation.

Objective:To identify and observe disease-causing gene variants and clinical phenotypes in a Han Chinese family with Leber congenital amaurosis (LCA).Methods:A retrospective study. A patient with LCA10 and his parents who had presented at Department of Ophthalmology of Henan Provincial People's Hospital on May 2022 were selected as the study subject. Detailed medical and family histories were recorded, fundus photography and flash electroretinogram (F-ERG) were performed. Peripheral venous blood samples (3 ml) of the proband and his parents were collected to extract whole genomic DNA, then whole exome sequencing (WES) and mitochondrial DNA (mtDNA) sequencing were carried out for the proband to determine the disease-causing gene and variants. All variants were annotated by bioinformatics analysis. According to the American College of Medical Genetics and Genomics (ACMG) guidelines, the pathogenicity of all detected variants were evaluated. Candidate variants were verified by Sanger sequencing, and in vitro minigene assay were performed to evaluate the impact of the missense variant with insufficient evidence on mRNA splicing.Results:The proband, male, 7-month-old, presented with an inability to follow light or objects, eye poking, photophobia, nystagmus, partial loss of retinal pigment epithelium around the fovea of the macula. At the age of 2 years old, F-ERG revealed severe reduction, elongation, or even no waveform of a-wave and b-wave in both eyes. No obvious abnormality was found in the clinical phenotype of his parents. The result of WES revealed that the proband carried two variants in exon 40 and exon 2 of CEP290, a frameshift variant c.5515_5518del (p.Glu1839Lysfs*11) (V1) and a novel missense variant c.74C>T (p.Ala25Val) (V2), respectively. The result of mitochondrial DNA sequencing was negative. Sanger sequencing confirmed that the heterozygous frameshift variant was inherited from his father and the heterozygous novel missense variant was inherited from his mother, which constituted compound heterozygous variants. In vitro minigene splicing assay confirmed that V2 created a new splicing donor at exon 2, leading to the in-frame deletion of 30bp fragment during transcription and loss of 10 amino acid residues in the protein. The two variants were pathogenic (V1) and likely pathogenic (V2) based on ACMG guidelines, respectively. Conclusions:The c.5515_5518del and novel c.74C>T compound heterozygous variants of the CEP290 gene probably are the cause of LCA10 in this family, which lead to the production of a truncated protein and aberrant splicing of pre-mRNA, respectively. LCA is characterized by early onset, severe impairment of visual function, and a wide range of disease-causing variations.

Glutamine,as the most abundant free amino acid in the human body,plays a crucial role in various physiological processes.These functions include providing energy to cells,supporting immune system function,maintaining intestinal health,and playing a key role in nitrogen transport.Under normal physiological conditions,muscle tissue is the primary site for the synthesis and release of glutamine.After glutamine is released into the bloodstream,it will be transported to the intestines,immune organs or other tissues and play related roles.However,in a state of illness,especially in the presence of tumors,there are significant changes in the metabolism and function of glutamine.The glutamine metabolism can serve as signaling molecules and participates in regulating various signaling pathways within tumor cells,including key pathways that affect cell growth,survival,and metabolism,such as the mTOR and AMPK pathways.This paper reviews the metabolic steps involving glutamine in tumor cells and the role of glutamine blockade in the tumor microenvironment.

Papaya, which is mainly cultivated in the southeastern region of China, is one of the four famous fruits in Lingnan. It is favored by people because of its edible and medicinal value. Fructose-6-phosphate, 2-kinase/fructose-2, 6-bisphosphatase (F2KP) is a unique bifunctional enzyme with a kinase domain and an esterase domain that catalyzes the synthesis and degradation of fructose-2, 6-bisphosphate (Fru-2, 6-P₂), an important regulator of glucose metabolism in organisms. In order to study the function of the gene CpF2KP encoding the enzyme in papaya, it is particularly important to obtain the target protein. In this study, the coding sequence (CDS) of CpF2KP, with a full-length of 2 274 bp, was got from the papaya genome. The amplified sequence of full-length CDS was cloned into the vector PGEX-4T-1 which was double digested with EcoR I and BamH I. The amplified sequence was constructed into a prokaryotic expression vector by genetic recombination. After exploring the induction conditions, the results of SDS-PAGE showed that the size of the recombinant GST-CpF2KP protein was about 110 kDa. The optimum IPTG concentration and temperature for CpF2KP induction were 0.5 mmol/L and 28 ℃, respectively. The purified sin[A1] gle target protein was obtained after purifying the induced CpF2KP protein. In addition, the expression level of this gene was detected in different tissues, and showed that the gene was expressed at the highest level in seeds and the lowest in pulp. This study provides an important basis for further revealing the function of CpF2KP protein and studying the involved biological processes of this gene in papaya.
Humans ; Carica/genetics* ; Recombinant Proteins ; Carbohydrate Metabolism ; Cloning, Molecular ; China

OBJECTIVE: To explore the cause of abortion and strategy of prenatal diagnosis for pregnant women with high risk for chromosomal abnormalities by using copy number variation sequencing (CNV-seq) and short tandem repeats (STR) analysis. METHODS: A total of 36 samples were collected, including amniotic fluid, abortion tissue, whole blood, chorionic villi and umbilical cord blood. CNV-seq and STR analysis were carried out to detect microdeletions, microduplications, chromosomal aneuploidies, mosaicisms and triploidies. RESULTS: Among all samples, 1 was detected with 4p15.1p16.3 and 14q11.1q22.1 duplication, 1 was detected with 19p13.3 deletion, 8 were detected with chromosomal aneuploidies, 4 were detected with mosaicisms, two were detected with triploidies. No definite pathogenic CNVs were detected in 20 samples, which yielded a positive detection rate of 44.44%. CONCLUSION As a high-throughput detection method, CNV-seq has the advantages of rapidity, simplicity and high accuracy. It may suit prenatal diagnosis and analysis of abortion factors in combination with STR analysis.
Abortion, Spontaneous/genetics* ; DNA Copy Number Variations ; Female ; Humans ; Karyotyping ; Microsatellite Repeats ; Pregnancy ; Prenatal Diagnosis

BACKGROUND:Biomechanical compatibility is the necessary condition to ensure the stable osseointegration with implants that then can function over a long period; therefore, it is especialy important to get knowledge about distribution of stress and strain between the maxilary central incisor and its surrounding bone tissue. OBJECTIVE: Based on five different anatomical types of natural teeth, to study the regularity of stress distribution between the maxilary central incisor root and implant.METHODS: According to the five different anatomical types of natural maxilary central incisors, UGNX and ANSYS were used to set up three-dimensional finite element models (B1, B2, M1, M2, P1) for the implant and surrounding structures, which were under 100 N static load at angles of 0o, 30o, 45o, 60o, 90o with the long axis of teeth. Then, the stress distribution between the five kinds of maxilary central incisor roots and implants was analyzed. RESULTS AND CONCLUSION:Among the five different anatomical types, the equivalent stress for both the natural central incisor and implant were increased with the increasing of angles, and the implant had a higher raising trend. The equivalent stress for the natural tooth concentrated upon B1 for the maximum value and M1 for the minimum value; while the equivalent stress for the implant focused on the maximum value at M1 and the minimum value at M2. There was a gap of 2%-31% between the equivalent stresses for the natural tooth roots and a gap of 4%-21% for the implants. The stress distribution range for the implant was just smaler than that for the natural tooth roots. It implies that the bit force of implant and natural tooth is in positive proportion to the bite angles, and the bite force that implant can burden is smaler than that the central incisor can.

The safe-care practiced by the Second Xiangya Hospital of Central South University is designed to make continued improvements of the quality of care and enhance hospital management.The paper first explained the concept of the model as upholding Xiangya spirit,standardized management,good clinical service pattern,enhanced continuing education and training,enhanced doctor-patient communication,risk prevention beforehand,enhanced team spirit,and enhanced information system.It went on to describe the measures taken by the hospital in implementing the mode,significance and steps for each measure taken,and initial outcomes achieved by the mode for both the hospital and patients in the end.