BACKGROUND:Arthroscopic anchor repair has become the main treatment method for rotator cuff tears at present.Among them,the insertion status of the anchor is a key factor in the success or failure of the operation.However,currently,the impact of the insertion depth of the anchor on the stress of the bone tunnel and the anchor under different bone density conditions remains unclear.OBJECTIVE:To explore the stress distribution of the bone tunnel and the anchor when the insertion depth of the anchor varies under different bone density conditions by using three-dimensional finite element analysis technology.METHODS:The CT image data of the humerus of volunteers were collected,and the models of the humerus and the anchor were constructed by using Mimics,3-Matic,and Solidworks software.In 3-Matic,holes with distances of 0,2,4,6,and 8 mm from the surface of the humerus were respectively created at the same position of the humerus and assembled with the anchor.In Mimics,values were assigned based on the CT gray value to obtain a model with normal bone mass(T value ≥-1.0).The parameters were changed to construct models with reduced bone mass(-2.5＜T value＜-1.0)and osteoporosis(T value＜-2.5).In each model,a 70 N pulling force was applied to the anchor along the direction tangent to the inner edge of the bone tunnel.The stress distribution and magnitude of the bone tunnel and the anchor when inserted at different depths under different bone density conditions were observed.RESULTS AND CONCLUSION:(1)When the insertion depth was the same,as the bone density decreased,the maximum equivalent stress of the anchor increased,while the maximum equivalent stress of the bone tunnel decreased.(2)When the bone density was the same,as the insertion depth of the anchor increased,the maximum equivalent stress of the anchor decreased.When the insertion depth was 4 mm,the stress of the bone tunnel was the smallest and the distribution was relatively uniform.The stress of the anchor was mainly distributed around the lower anchor hole and the proximal thread,and the stress of the bone tunnel was mainly at the part in contact with the proximal thread.The increase in the insertion depth would change the uniformity and pattern of the stress distribution,while the bone density had a relatively small impact on the stress distribution pattern.(3)It is concluded that the bone density of the humerus is crucial for the anchor repair of rotator cuff tears.It is recommended that clinicians measure the bone density of the greater tuberosity of the humerus before the operation.Excessive insertion depth of the anchor does not significantly increase its stability.Clinicians can conduct personalized preoperative assessments by using the finite element analysis method in combination with the actual situation of patients to achieve the best surgical results.

BACKGROUND:The femorofibular angle is a commonly used reference angle for mechanical axis correction in high tibial osteotomy on a single plane,but there has been no in-depth study on the application of this angle in high tibial osteotomy on a single plane.OBJECTIVE:To explore the application effect of the femorofibular angle as a reference for mechanical axis correction in high tibial osteotomy on a single plane.METHODS:A retrospective analysis was conducted on 64 cases of knee osteoarthritis patients who underwent high tibial osteotomy on a single plane at Third Affiliated Hospital of Beijing University of Chinese Medicine from January 2023 to January 2024.The patients were grouped according to the intraoperative mechanical axis correction reference method.The observation group consisted of 32 cases,which used the femorofibular angle as a reference for mechanical axis correction during surgery.The control group consisted of 32 cases,which used electrocautery line measurement as a reference for mechanical axis correction during surgery.Both groups received the same perioperative treatment and management.The lower limb mechanical axis ratio,hip-knee-ankle angle,proximal medial tibial angle,and femorofibular angle were recorded before and after surgery to assess changes in the lower limb mechanical state.The operation time and number of fluoroscopies were recorded.The visual analog scale score and Lysholm score for pain and knee function were recorded before surgery and at 1 and 3 months after surgery to evaluate changes in knee pain and function.RESULTS AND CONCLUSION:(1)All patients completed the treatment and follow-up,and no serious adverse events occurred.(2)Before surgery,there was no statistically significant difference in the lower limb mechanical axis ratio,proximal medial tibial angle,hip-knee-ankle angle,and femorofibular angle between the two groups(P＞0.05).At 3 months after surgery,the lower limb mechanical axis ratio,proximal medial tibial angle,hip-knee-ankle angle,and femorofibular angle were significantly improved in both groups compared to before surgery,with statistically significant differences(P＜0.05).There was no significant difference between the two groups(P＞0.05).(3)During surgery,the operation time and number of fluoroscopies in the observation group were less than those in the control group,with statistically significant differences(P＜0.05).(4)At each follow-up point before and after surgery,there was no statistically significant difference in the visual analog scale score and Lysholm score between the two groups(P＞0.05).With the passage of time after surgery,the visual analog scale score and Lysholm score in both groups were significantly improved compared to before surgery(P＜0.05).(5)It is suggested that the application of the femorofibular angle as a reference for mechanical axis correction in high tibial osteotomy on a single plane can accurately locate the range of lower limb mechanical axis correction,is simple and reliable,and reduces the number of fluoroscopies and operation time compared to traditional electrocautery line measurement.

BACKGROUND:The most common complication of traumatic femoral neck fractures after internal fixation is femoral head necrosis.Currently,many studies have reported on the risk factors that affect the occurrence and development of postoperative femoral head necrosis,but there is still a lack of tools to predict the risk of femoral head necrosis after internal fixation of femoral neck fractures.OBJECTIVE:To develop a predictive model that estimates the risk of femoral head necrosis shortly after patients with femoral neck fractures receive cannulated screw internal fixation.METHODS:A retrospective analysis reviewed clinical records of 172 patients who underwent cannulated screw internal fixation for femoral neck fractures at Department of Orthopedics of Mianyang Central Hospital from January 2013 to June 2023.Patients were categorized into two groups based on the presence or absence of femoral head necrosis within one year post-operation:the necrosis group and the non-necrosis group.Univariate analysis,Lasso regression,and multivariate Logistic regression techniques were employed to identify the determinants of femoral head necrosis.A nomogram prediction model was constructed using R language's"rms"package,version 4.0.The receiver operating characteristic curve was used to evaluate the discriminatory ability of the model.The Hosmer-Lemeshow test was used to evaluate the goodness of fit of the model,and the decision curve analysis was used to determine its clinical application benefits.Internal validation of the study was conducted using the Bootstrap method,involving 1 000 repeated samplings.To delve deeper into the primary factors influencing femoral head necrosis post-internal fixation of the femoral neck,this paper employed the SHAP method for data set analysis.RESULTS AND CONCLUSION:(1)The risk factors leading to femoral head necrosis in the short term after cannulated screw fixation of femoral neck fractures include:smoking,diabetes,Garden classification,fracture line location,reduction quality,age,and operation time.(2)The prediction model demonstrated robust performance,evidenced by an area under the curve of 0.940(95％Confidence Interval:0.903 to 0.977),indicating a high level of prediction accuracy.The model achieved a sensitivity of 90.2％and a specificity of 87.6％,indicating that its diagnostic performance was stable.The Hosmer-Lemeshow goodness-of-fit test yielded a chi-square value of 6.593 with a P-value of 0.581,confirming that the model's predictions closely align with the observed outcomes.(3)The calibration curve of the model also performed well,and its overall trend was very close to the ideal curve,further proving the high accuracy of the model.(4)The internal validation was carried out by the Bootstrap method with 1 000 repeated samplings,and the area under the curve of the model internal validation was still as high as 0.939,proving that the model had good stability.(5)Through the decision curve,it is found that within the probability threshold range of 1％to 92％,the model can obtain the maximum net benefit value.(6)The SHAP analysis results show that among the risk factors analyzed in this study,the location of the fracture line serves as the most significant predictor of femoral head necrosis following internal fixation with cannulated screws in femoral neck fractures,and subcapital fractures are extremely prone to femoral head necrosis after surgery.(7)It is concluded that the validated prediction model demonstrates strong discriminative power and reliability,offering practical clinical utility.It serves as a useful reference tool for short-term risk assessment of femoral head necrosis following internal fixation of femoral neck fractures.

BACKGROUND:Due to the complex movement of the scapula,which is a six-degree-of-freedom activity in three-dimensional space,it is difficult to measure it accurately using traditional methods.The image and model matching technology based on dual-plane X-ray is a three-dimensional measurement method that has gradually developed and matured in recent years.Two high-speed cameras are used to project and shoot from orthogonal directions.Compared with a single perspective,this method has advantages in observation range and reduction of out-of-plane errors,and is suitable for the study of scapula kinematics.OBJECTIVE:X-ray biplane and image-model registration technology were used to explore the differences in scapular kinematics between normal individuals and patients with rotator cuff tears,providing a basis for the treatment and rehabilitation of rotator cuff tear patients.METHODS:From April 2023 to January 2024,10 patients with normal shoulders and 10 patients with rotator cuff tears who met the inclusion criteria were enrolled from Guanghua Hospital Affiliated to Shanghai University of Traditional Chinese Medicine.The subjects underwent a shoulder CT scan to create a 3D model and a local scapular coordinate system.X-ray biplane images were taken during shoulder abduction with two C-arm machines.The 2D and 3D images were registered to compare scapular kinematic differences between the two groups at 0°,15°,30°,45°,60°,75°,and 90° of abduction,including scapular rotation angle and displacement distance.RESULTS AND CONCLUSION:(1)During shoulder abduction,the scapula of both groups showed upward rotation,but the upward rotation of the rotator cuff tear group was greater than that of the control group,and the difference was significant when the abduction was 30°-90°(P＜0.01).At the same time,the scapula internal rotation of both groups gradually increased,but the rotator cuff tear group was significantly greater than the control group when the abduction was 45°-90°(P＜0.01).In addition,the anteroposterior tilt of the scapula of the two groups was significantly different when the abduction was 15°-90°(P＜0.01).The scapula posterior tilt of the control group gradually increased during abduction,while the scapula of the rotator cuff tear group tilted forward except for a slight posterior tilt at 15°-30° abduction.(2)In terms of displacement,the upward displacement of the rotator cuff tear group was less than that of the control group during abduction,and the difference was significant at 15°-90°(P＜0.05),but there was no significant difference in lateral and anterior-posterior displacement between the two groups(P＞0.05).(3)Rotator cuff tear can cause scapular dyskinesis,characterized by increased upward rotation,internal rotation,and abnormal forward tilt during shoulder abduction.Identifying and addressing scapular dyskinesis is crucial for treating rotator cuff tear.

BACKGROUND:Studies have shown that there is a close relationship between pyroptosis,inflammatory factors and osteoporosis.OBJECTIVE:To review the effects of pyroptosis and inflammatory factors on the pathogenesis of osteoporosis from the perspectives of osteogenic differentiation and osteoclastic differentiation,based on an overview of pyroptosis in relation to the interaction of relevant inflammatory factors.METHODS:The first author used the computer to search the literature published by each database until 2024,and searched CNKI,WanFang,VIP and PubMed databases with the search terms of"pyroptosis,inflammatory factors,osteoporosis,osteoblast,osteoclast,bone metabolism,signaling pathway,review"in Chinese and English.A total of 79 papers were finally included according to the inclusion criteria.RESULTS AND CONCLUSION:The progression of osteoporosis is closely related to inflammation,in which pyroptosis plays a key role.Immune cells induce pyroptosis through apoptosis pathway,promote the secretion of inflammatory factors such as interleukin-18,interleukin-1β and NLRP3,build an inflammatory immune microenvironment,and regulate bone metabolism through complex signaling pathways,resulting in enhanced bone absorption and reduced bone formation,thereby leading to osteoporosis.Previous studies have shown that inhibiting pyroptosis is anti-inflammatory and slows the progression of osteoporosis,and it has been shown to improve inflammatory bone loss in vitro and in animal models.At present,research on pyroptosis and osteoporosis is limited.On the one hand,the exact mechanism of osteoporosis and the pathogenesis of pyroptosis are unknown,and the specific pathways and regulatory mechanisms remain to be understood.On the other hand,therapeutic strategies targeting pyroptosis are still theoretical,not clinically proven,and drug side effects are unknown.In the future,the research focus is to further explore the pathogenesis,especially the mechanism of pyroptosis,identify potential therapeutic targets,further study the pyroptosis signaling pathway and Gasdermin protein,and develop new drugs to improve the therapeutic effect in patients with osteoporosis.

BACKGROUND:With the development of the concept of minimally invasive surgery,lumbar posterior dynamic internal fixation has become the mainstream operation for the treatment of diseases caused by intervertebral disc degeneration.OBJECTIVE:To review the latest progress of lumbar posterior dynamic internal fixation in the treatment of lumbar degenerative diseases and postoperative intervertebral disc rehydration.METHODS:The relevant literature published in CNKI,WanFang,and PubMed databases from 2010 to 2025 was searched with the Chinese and English search terms"lumbar spine,dynamic internal fixation,intervertebral disc degeneration,Coflex system,Dynesys system,In-space system,PercuDyn system,intervertebral disc rehydration,crushing stress."By reading the articles,we eliminated the literature with little relevance to the article topic,poor quality and outdated content,and finally 65 articles were included for summary.RESULTS AND CONCLUSION:(1)Although the main surgical method for the treatment of disc degeneration is still the traditional open surgical method of implantation,posterior lumbar dynamic internal fixation has made great progress.(2)Posterior lumbar dynamic fixation can be divided into open dynamic fixation system and percutaneous dynamic fixation system.Each system can be divided into interspinous dynamic internal fixation system and pedicle dynamic internal fixation system according to the different fixation positions.According to the design of specific instruments and the differences of operation methods in the surgery,different operation methods have been derived.At present,the focus of research at home and abroad is on open dynamic internal fixation system.(3)Under the premise that the clinical effect of posterior lumbar dynamic internal fixation is better than that of traditional interbody fusion surgery,it can cause the rehydration phenomenon of postoperative lumbar intervertebral disc,and further improve the long-term postoperative efficacy of patients.

OBJECTIVE:Patients with osteoporotic vertebral compression fractures still have residual back pain after vertebral augmentation.The current research is characterized by limited sample size,complex confounding factors,and inconsistent research results.To gain a deeper understanding of this phenomenon,the aim of this study was to identify and evaluate the risk factors for residual back pain after surgery through a systematic review and meta-analysis.METHODS:A comprehensive search was conducted in CNKI,VIP,WanFang,CBMdisc,PubMed,The Cochrane Library,Embase,and Web of Science for case-control studies on residual back pain after vertebral body augmentation for osteoporotic vertebral compression fractures from database inception to July 2024.The search terms were a combination of subject terms and free terms.The basic information,patient characteristics,surgical-related indicators,and risk factors for surgical back pain of the included studies were extracted.After evaluating the bias risk of all included studies,a meta-analysis was conducted using Stata 14.0 software on the relevant indicators.RESULTS:(1)21 case-control studies with a total of 8 043 patients were included.Among them,965 patients developed back pain.The quality score of all 21 studies was ≥7.(2)The meta-analysis results showed that age(WMD=0.98,95％CI:0.40-1.56,P=0.010),bone mineral density(WMD=-0.28,95％CI:-0.34 to-0.21,P=0.000),the number of vertebral fractures(OR=3.50,95％CI:2.65-4.62,P=0.000),thoracolumbar fracture index(OR=3.65,95％CI:2.61-5.11,P=0.000),cement volume(OR=6.89,95％CI:2.62-18.17,P=0.000),and cement distribution(OR=2.38,95％CI:1.93-2.93,P=0.000)were risk factors for the development of back pain after vertebral body augmentation in patients with osteoporotic vertebral compression fractures.CONCLUSION:Current evidence indicates that age,bone mineral density,the number of vertebral fractures,thoracolumbar fracture index,bone cement injection volume,and the distribution of bone cement are risk factors for low back pain.Specifically,bone mineral density,the number of vertebral fractures,thoracolumbar fracture index,and non-uniform distribution of bone cement are identified as independent risk factors for low back pain.Patients exhibiting these high-risk factors require vigilant monitoring and prompt intervention to mitigate the occurrence of clinical low back pain,thereby enhancing patient outcomes and quality of life.

OBJECTIVE:Based on different algorithms of machine learning,the prediction model of lumbar disc herniation has become a trend and hot spot in the development of precision medicine.However,there is limited evidence on the reporting quality and methodological quality of prediction models of lumbar disc herniation outcomes using machine learning.This article is aimed to explore the performance of machine learning algorithms in predicting the prognosis of lumbar disc herniation by comprehensively analyzing the report quality and risk of bias of previous studies that developed and validated prognosis prediction models based on machine learning through a comprehensive literature search,in order to explore the performance of machine learning algorithms in predicting the prognosis of lumbar disc herniation.METHODS:The databases of CNKI,WanFang,VIP,SinOMED,PubMed,Web of Science,Embase,and The Cochrane Library were searched by computer.Studies on the use of machine learning to develop(and/or validate)prognostic prediction models for lumbar disc herniation were collected from the inception of the database to December 31,2023.Two researchers independently screened the literature,extracted data,and assessed the risk of bias of the included studies.The reporting quality and risk of bias of the included studies were assessed by the Multivariable Transparent Reporting of Predictive Models(TRIPOD)statement and the Predictive Model Risk of Bias Assessment Tool(PROBAST).The results of the evaluation were analyzed using descriptive statistics and visual charts.RESULTS:(1)A total of 23 articles were included,and the TRIPOD compliance of each study ranged from 11％to 87％,with a median compliance of 54％.The quality of reporting of titles,detailed descriptions of treatment measures,blinding of predictors,handling of missing data,details of risk stratification,specific procedures for enrollment,model interpretation,and model performance was mostly poor,with TRIPOD adherence rates ranging from 4％to 35％.(2)Of all included studies,61％had a high risk of bias and 39％had an unclear overall risk of bias.The area under the curve,accuracy,sensitivity and specificity were used to evaluate the performance of the model.The areas under the curve of 20 models were reported,ranging from 0.561 to 0.999.Three models reported the accuracy of the model,ranging from 82.07％to 89.65％.(3)Among all included studies,the statistical analysis domain was most often assessed as having a high risk of bias,mainly due to the small number of valid samples,the selection of predictors based on univariate analysis and the lack of calibration and discrimination assessment of the model in the study.CONCLUSION:These results indicate that machine learning can achieve good predictive ability in the development and validation of prognostic models for lumbar disc herniation.The commonly used algorithms include regression algorithm,support vector machine,decision tree,random forest,artificial neural network,naive Bayes and other algorithms.Reasonable algorithms combined with clinical practice can improve the accuracy of prognosis prediction of lumbar disc herniation.However,the reporting and methodological quality of prognosis prediction models based on machine learning are poor,the prediction performance of different models varies greatly,and the generalization and extrapolation of research models are unclear.There is an urgent need to improve the design,implementation and reporting of such studies.To promote the application of machine learning in the clinical practice of lumbar disc herniation prediction models,it is necessary to comprehensively consider various predictors related to the prognosis of the disease before modeling,and strictly follow the relevant standards of PROBAST tool during modeling.

BACKGROUND:The prevalence of osteoporosis is high in postmenopausal women,but muscle mass,grip strength,and how these factors affect osteoporosis are understudied,and the exact link between them has not been clarified.OBJECTIVE:To investigate the correlation between muscle mass,grip strength,appendicular skeletal muscle index and bone mineral density in postmenopausal women with osteoporosis and to assess the potential values of these indices in predicting and diagnosing postmenopausal osteoporosis.METHODS:Eighty-three postmenopausal women were collected from the outpatient clinic of the Third Affiliated Hospital of Guangzhou University of Chinese Medicine from February 2023 to January 2024.General data were collected.Bone mineral density was detected.T-value,muscle mass of each part,grip strength were recorded.The body mass index and appendicular skeletal muscle index were calculated.The patients were categorized into non-osteoporosis group(n=17)and postmenopausal osteoporosis group(n=66)according to T value and fracture history,and were statistically analyzed accordingly.RESULTS AND CONCLUSION:(1)The body mass,body mass index,bone mineral density of the overall lumbar spine,muscle mass and appendicular skeletal muscle index were higher in the non-osteoporosis group than the osteoporosis group(P＜0.05).(2)Muscle mass was positively correlated with bone mineral density of the overall lumbar spine and individual vertebrae(P＜0.05).(3)Multiple stepwise linear regression analysis showed that body mass and grip strength were linearly and positively correlated with muscle mass;body height and muscle mass were linearly and positively correlated with grip strength,and body mass was linearly and negatively correlated with grip strength.Body mass index was linearly and positively correlated with bone mineral density,and age was linearly and negatively correlated with bone mineral density.(4)Analysis by receiver operating characteristic curve showed that:muscle mass(the area under the curve,sensitivity,specificity and critical value of muscle mass were 0.744,76.50％,74.20％and 36.50 kg,respectively,with P=0.002)and appendicular skeletal muscle index(the area under the curve,sensitivity,specificity and critical value of appendicular skeletal muscle index were 0.739,82.40％,62.10％and 5.81 kg/m2,respectively,and P=0.002)had good predictive value for postmenopausal osteoporosis.To conclude,a reduction in muscle mass and appendicular skeletal muscle index can help to predict the risk of postmenopausal osteoporosis,and the possibility of osteoporosis should be taken into account in postmenopausal women when muscle mass is＜36.50 kg or appendicular skeletal muscle index is＜5.81 kg/m2,in order to prevent the occurrence of postmenopausal osteoporosis.

BACKGROUND:The quadriceps strength of patients with osteoporosis and sarcopenia is significantly reduced,which can further reduce the function of the knee joint,affect the function of the lower limbs and even lead to a decrease in whole-body coordination.It is speculated that a reasonable quadriceps training program and personalized guidance are beneficial to the recovery of knee joint function in patients with osteoporosis and sarcopenia.OBJECTIVE:To observe the effect of short-term moderate-intensity resistance rehabilitation training on the mass and function of the quadriceps and knee joint function in patients with osteoporosis and sarcopenia.METHODS:Using the integrated physical examination and rehabilitation model,375 patients with osteoporosis and sarcopenia were screened at the Health Management Center of Shanghai Public Health Clinical Center.They underwent 12 weeks of combined/comprehensive exercise rehabilitation based on resistance exercise,including quadriceps resistance isotonic and isometric contraction training twice a week(3-5 sets each time,10-15 minutes per set)and aerobic exercise/balance exercise two or three times a week(30 minutes each time).Assessments and data collection were performed before rehabilitation training,12 weeks after rehabilitation training,and at follow-up 12 weeks after stopping rehabilitation training,mainly including knee joint range of motion and proprioception,quadriceps muscle strength,and cross-sectional area(magnetic resonance imaging results),pain,knee joint function(Hospital for Special Surgery score)and walking function("up-and-go"time and 6 m pace test results)as well as the patient's psychological status assessment.RESULTS AND CONCLUSION:All 375 patients completed 12 weeks of rehabilitation training and 12 weeks of follow-up without any adverse events.(1)Compared with before training,the patients' gait speed and knee range of motion increased significantly after 12 weeks of rehabilitation training(P＜0.01),the time of"stand-to-walk"decreased(P＜0.01),and the proprioception of the knee joint and the strength of the quadriceps femoris were significantly improved(P＜0.01);and at the follow-up visit 12 weeks after stopping training,the above indicators and functions of the patients were well maintained(P＞0.05).(2)Magnetic resonance imaging results showed that the effective cross-sectional area of the quadriceps femoris did not improve significantly after 12 weeks of rehabilitation training(P＞0.05);but the Hospital for Special Surgery score of knee joint function increased significantly(P＜0.01),and the visual analog pain scale score decreased significantly(P＜0.01),suggesting that this may be related to the improvement of quadriceps femoris quality by resistance rehabilitation training.(3)The results of the Hospital Anxiety and Depression Scale score showed that the anxiety and depression scores of the patients continued to decrease,both at 12 weeks of rehabilitation training and at 12 weeks after stopping training(P＜0.01).It is suggested that resistance rehabilitation training of the quadriceps can help patients with osteoporosis and sarcopenia to restore quadriceps muscle strength,increase range of motion,improve proprioception and joint stability,thereby enhancing knee joint function,reducing pain,improving depression and anxiety,and to a certain extent promoting the coordinated recovery of the musculoskeletal system.