Intraoperative cell salvage (IOCS) has been widely applied as an important blood conservation measure in surgical operations. However, there is currently a lack of clinical practice guidelines for the implementation of IOCS in patients with malignant tumors. This report aims to provide clinicians with recommendations on the use of IOCS in patients with malignant tumors based on the review and assessment of the existed evidence. Data were derived from databases such as PubMed, Embase, the Cochrane Library and Wanfang. The guideline development team formulated recommendations based on the quality of evidence, balance of benefits and harms, patient preferences, and health economic assessments. This study constructed seven major clinical questions. The main conclusions of this guideline are as follows: 1) Compared with no perioperative allogeneic blood transfusion (NPABT), perioperative allogeneic blood transfusion (PABT) leads to a more unfavorable prognosis in cancer patients (Recommended); 2) Compared with the transfusion of allogeneic blood or no transfusion, IOCS does not lead to a more unfavorable prognosis in cancer patients (Recommended); 3) The implementation of IOCS in cancer patients is economically feasible (Recommended); 4) Leukocyte depletion filters (LDF) should be used when implementing IOCS in cancer patients (Strongly Recommended); 5) Irradiation treatment of autologous blood to be reinfused can be used when implementing IOCS in cancer patients (Recommended); 6) A careful assessment of the condition of cancer patients (meeting indications and excluding contraindications) should be conducted before implementing IOCS (Strongly Recommended); 7) Informed consent from cancer patients should be obtained when implementing IOCS, with a thorough pre-assessment of the patient's condition and the likelihood of blood loss, adherence to standardized internally audited management procedures, meeting corresponding conditions, and obtaining corresponding qualifications (Recommended). In brief, current evidence indicates that IOCS can be implemented for some malignant tumor patients who need allogeneic blood transfusion after physician full evaluation, and LDF or irradiation should be used during the implementation process.

Aberration of the right coronary artery from the left anterior descending is a very rare congenital anomaly.The anomalous the right coronary artery,as a branch of the septal branch,has not been reported clinically.This article reports such rare case.A 52-year-old female was admitted due to"sudden chest pain and confusion for 4 hours".The ECG showed that the ST-segment of leads(V1-V4,V3R,V4R and V5R)were elevated about 0.1-0.3 mVThe blood pressure was 63/53 mmHg.She was diagnosed as cardiogenic shock second to acute anterior and right ventricular ST-segment elevation myocardial infarction.Emergency coronary angiography was performed after intra-aortic ballon pump was implanted to assist circulation.During the treatment of the culprit vessel,it was accidentally found that the right coronary artery,as a branch vessel,originated from the ostium of the second septal branch of the anterior descending artery.

Objective To analyze the level of 25-hydroxyvitamin D[25(OH)D]in patients with type 2 diabetes mellitus,and preliminarily investigate the correlation between serum 25(OH)D level and metabolic indicators such as glycosylated hemoglobin(HbA1c)and pancreatic islet function in patients with type 2 diabetes mellitus.Methods A total of 459 patients with type 2 diabetes mellitus who were hospitalized in the Department of Endocrinology,Xinxiang First People's Hospital from January 2020 to December 2020 were selected as the research subjects.Clinical data of the patients were collected,including gender,age,serum 25(OH)D,fasting insulin,C-peptide,HbA1c,fasting blood glucose,postprandial blood glucose,urinary microalbumin,urinary albumin-to-creatinine ratio,blood calcium,blood uric acid(UA),triglyceride(TG),total cholesterol(TCH),low-density lipoprotein(LDL),and high-density lipoprotein(HDL).According to the serum 25(OH)D level,the patients were divided into sufficient group[n=20,25(OH)D≥30 μg·L-1],insufficient group[n=95,20 μg·L-125(OH)D＜30 μg·L-1],deficient group[n=231,10 μg·L-1 ≤25(OH)D＜20 μg·L-1],and severely deficient group[n=113,25(OH)D＜10 μg·L-1].Differences in metabolic indicators of patients in the four groups were compared,and the correlation between 25(OH)D level and metabolic indicators was analyzed by using the Pearson correlation.Results The serum 25(OH)D level of patients with type 2 diabetes mellitus was 3.00-46.59(15.75±0.35)μg·L-1;the serum 25(OH)D level of male patients was significantly higher than that of female patients(P＜0.05).The prevalence of 25(OH)D deficiency in patients with type 2 diabetes mellitus was 74.9％(344/459).The 25(OH)D deficiency mainly occurred in January,February,March,April,November,and December.Patients in the insufficient,deficient,and severely deficient groups had significantly higher HbA1c levels than those in the sufficient group(P＜0.05),and the HbA1c levels of patients in the deficient and severely deficient groups were significantly higher than those in the insufficient group(P＜0.05);there was no statistically significant difference in the HbA1c level between the deficient group and the severely deficient group(P＞0.05).There was no statistically significant difference in fasting blood glucose between the sufficient group and insufficient group,and between the deficient group and severely deficient group(P＞0.05);fasting blood glucose of patients in the deficient and severely deficient groups was significantly higher than that in the sufficient and insufficient groups(P＜0.05).There was no statistically significant difference in fasting insulin,urinary microalbumin,daily total urinary albumin,and urinary albumin-to-creatinine ratio of patients among the sufficient,insufficient,and deficient groups(P＞0.05);the fasting insulin of patients in the severely deficient group was significantly lower than that in the sufficient,insufficient,and deficient groups(P＜0.05);the urinary microalbumin,daily total urinary albumin,and urinary albumin-to-creatinine ratio of patients in the severely deficient group were significantly higher than those in the sufficient,insufficient,and deficient groups(P＜0.05).There was no statistically significant difference in the homeostasis model assessment for insulin resistance(HOMA-IR),serum albumin,blood creatinine,1-hour postprandial blood glucose,2-hour postprandial blood glucose,3-hour postprandial blood glucose,fasting C-peptide,1-hour postprandial C-peptide,2-hour postprandial C-peptide,3-hour postprandial C-peptide,TG,TCH,LDL,HDL,blood UA,and blood calcium of patients among the four groups(P＞0.05).Pearson correlation analysis showed that serum 25(OH)D levels in patients with type 2 diabetes mellitus were negatively correlated with HbA1c,urinary microalbumin,and urinary albumin-to-creatinine ratio(r=-0.093,-0.166,-0.157;P＜0.05),and positively correlated with fasting insulin(r=0.089,P＜0.05).Serum 25(OH)D levels in patients with type 2 diabetes mellitus had no correlation with fasting blood glucose,HOMA-IR,serum albumin,blood creatinine,1-hour postprandial blood glucose,2-hour postprandial blood glucose,3-hour postprandial blood glucose,fasting C-peptide,1-hour postprandial C-peptide,2-hour postprandial C-peptide,3-hour postprandial C-peptide,TG,TCH,LDL,HDL,blood UA,and blood calcium(P＞0.05).Conclusion 25(OH)D deficiency and insufficiency are common in patients with type 2 diabetes mellitus,especially in female patients.In patients with type 2 diabetes mellitus,25(OH)D level is positively correlated with fasting insulin and negatively correlated with HbAlc,urinary microalbumin,and urinary albumin-to-creatinine ratio.25(OH)D deficiency in patients with type 2 diabetes mellitus is mainly distributed in January,February,March,April,November,and December.

Objective To explore the effect of applying comprehensive interventions on promoting pathogen detec-tion before antimicrobial therapy in hospitalized patients.Methods Hospitalized patients who received therapeutic use of antimicrobial agents in a tertiary first-class hospital from January 2020 to December 2021 were selected as the research subjects.Comprehensive intervention measures were implemented from January 2021.The pathogen detec-tion rates,detection classification,and detection rates of key monitored departments before antimicrobial therapy were compared between the pre-intervention group(January-December 2020)and the post-intervention group(Janu-ary-December 2021).Results A total of 10 239 hospitalized patients who received therapeutic use of antimicrobial agents were included in analysis,4 526 cases were in the pre-intervention group and 5 713 cases in the post-interven-tion group.The pathogen detection rates before antimicrobial therapy,before restricted grade antimicrobial therapy,and before special grade antimicrobial therapy after intervention were 94.56％,94.72％,and 96.03％,respective-ly,which were higher than 83.74％,84.47％,and 84.95％before intervention,with statistical significance(all P＜0.05).The detection rate of targeted pathogens after intervention was 64.87％,higher than that before interven-tion(28.04％),with statistically significant difference(P＜0.05).The pathogen detection rates before therapeutic use of antimicrobial agents in departments of critical care medicine,pulmonary and critical care medicine,pediatrics,neurosurgery,and general surgery after intervention were 93.20％,91.17％,92.20％,94.12％,and 91.15％,re-spectively,higher than the rates before intervention,namely 85.00％,82.19％,83.20％,83.33％,and 83.03％,respectively,with statistical significance(all P＜0.05).Conclusion The application of comprehensive intervention measures can improve the pathogen detection rate before antimicrobial therapy of hospitalized patients.Close atten-tion should be paid to the pathogen detection indicators related to healthcare-associated infection diagnosis and for the detection of sterile body fluid.

This article summarizes and organizes relevant publications in journals, along with a review of medical history, systematically summarizing the development process of dental alveolar surgery in China. The initial establishment phase (1935—1952) marked the starting point of Chinese Alveolar Surgery. Despite the impact of wars, it laid the foundation for subsequent research and practice. During the early development phase (1953—1966), the "Chinese Journal of Stomatology" was founded, which promoted the development of Alveolar Surgery. Research focused on tooth extraction methods and complications. Tooth Transplantation and Preprosthetic Surgery gradually began to take off. The stagnant phase (1967—1977) occurred due to the interruption of international exchanges, leading to an almost complete halt in the development of Alveolar Surgery. Entering the rapid catch-up phase (1978—1985), Alveolar Surgery scholars in China began striving to overcome the stagnation of the previous decade. While some progress was made, no significant innovative achievements emerged. In the scientific development phase (1986—2010), clinical research, basic experiments, and paper writing in modern Chinese Alveolar Surgery began to adhere to scientific standards with the rise of experimental medicine. The exploration and innovation stage (2011—2023) is the current development phase, during which Chinese Aveolar Surgery has reached its peak, making substantial progress in technology, clinical practices, and basic research, gradually reaching or even surpassing international advanced levels. Looking back at the development history in China, we can find the wisdom and hard work of the older generation of Alveolar Surgery scholars. However, contemporary challenges and issues, such as standardizing technology, promoting clinical practices, and talent cultivation, need to be addressed by present-day Alveolar Surgery professionals as they forge ahead.

Objective This study aimed to understand the epidemic status and phylogenetic relationships of rotavirus group A(RVA)in the Pearl River Delta region of Guangdong Province,China. Methods This study included individuals aged 28 days-85 years.A total of 706 stool samples from patients with acute gastroenteritis collected between January 2019 and January 2020 were analyzed for 17 causative pathogens,including RVA,using a Gastrointestinal Pathogen Panel,followed by genotyping,virus isolation,and complete sequencing to assess the genetic diversity of RVA. Results The overall RVA infection rate was 14.59%(103/706),with an irregular epidemiological pattern.The proportion of co-infection with RVA and other pathogens was 39.81%(41/103).Acute gastroenteritis is highly prevalent in young children aged 0-1 year,and RVA is the key pathogen circulating in patients 6-10 months of age with diarrhea.G9P[8](58.25%,60/103)was found to be the predominant genotype in the RVA strains,and the 41 RVA-positive strains that were successfully sequenced belonged to three different RVA genotypes in the phylogenetic analysis.Recombination analysis showed that gene reassortment events,selection pressure,codon usage bias,gene polymorphism,and post-translational modifications(PTMs)occurred in the G9P[8]and G3P[8]strains. Conclusion This study provides molecular evidence of RVA prevalence in the Pearl River Delta region of China,further enriching the existing information on its genetics and evolutionary characteristics and suggesting the emergence of genetic diversity.Strengthening the surveillance of genotypic changes and gene reassortment in RVA strains is essential for further research and a better understanding of strain variations for further vaccine development.

Objective Based on U.S.Food and Drug Administration Adverse Event Reporting System(FAERS)database,the signal mining of tizanidine adverse drug events(ADEs)was conducted to explore the occurrence characteristics of ADE,hoping to provide references for the safe clinical application of tizanidine.Methods The reporting odds ratio(ROR)and medicines and healthcare products regulatory agency methods(MHRA)were used to analyse the ADE of tizanidine using FAERS registration data from the first quarter of 2004 to the second quarter of 2022.After valid signals were obtained,the MedDRA was used for translation and system organ classification.Results A total of 7 135 reports of tizanidine ADE were obtained,including 1 732 patients,1 304 ADE types were involved.According to the results of 2 ADE signal mining methods,at the preferred term(PT)level,177 signals were detected.There were 32 PT signals not included in the drug instructions,including potassium wasting nephropathy,cardio-respiratory arrest,and foetal growth restriction etc.In 1 732 patients,the number of ADE cases of female was 2.37 times that in male(1 057 vs.446),and the age group between 40 and 64 accounted for a large proportion(36.03％).The highest proportion(32.79％)reported by consumers.The system organ class involved mainly included various neurological diseases and psychosis.The median time to onset of tizanidine-related ADEs was 75 d(interquartile range:28-223 d),but it was necessary to be vigilant that ADE may still occur 1 year after starting the drug(13.38％).Conclusion This study aims to suggest that clinical application of tizanidin-related ADE should be paid full attention to the occurrence of ADE such as potassium-wasting nephropathy and suicidally completed,as well as key populations such as women and patients of 40-64 years old.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Purpose::The toughest challenge in pedestrian traffic accident identification lies in ascertaining injury manners. This study aimed to systematically simulate and parameterize 3 types of craniocerebral injury including impact injury, fall injury, and run-over injury, to compare the injury response outcomes of different injury manners.Methods::Based on the total human model for safety (THUMS) and its enhanced human model THUMS-hollow structures, a total of 84 simulations with 3 injury manners, different loading directions, and loading velocities were conducted. Von Mises stress, intracranial pressure, maximum principal strain, cumulative strain damage measure, shear stress, and cranial strain were employed to analyze the injury response of all areas of the brain. To examine the association between injury conditions and injury consequences, correlation analysis, principal component analysis, linear regression, and stepwise linear regression were utilized.Results::There is a significant correlation observed between each criterion of skull and brain injury ( p < 0.01 in all Pearson correlation analysis results). A 2-phase increase of cranio-cerebral stress and strain as impact speed increases. In high-speed impact (> 40 km/h), the Von Mises stress on the skull was with a high possibility exceed the threshold for skull fracture (100 MPa). When falling and making temporal and occipital contact with the ground, the opposite side of the impacted area experiences higher frequency stress concentration than contact at other conditions. Run-over injuries tend to have a more comprehensive craniocerebral injury, with greater overall deformation due to more adequate kinetic energy conduction. The mean value of maximum principal strain of brain and Von Mises stress of cranium at run-over condition are 1.39 and 403.8 MPa, while they were 1.31, 94.11 MPa and 0.64, 120.5 MPa for the impact and fall conditions, respectively. The impact velocity also plays a significant role in craniocerebral injury in impact and fall loading conditions (the p of all F-test < 0.05). A regression equation of the craniocerebral injury manners in pedestrian accidents was established. Conclusion::The study distinguished the craniocerebral injuries caused in different manners, elucidated the biomechanical mechanisms of craniocerebral injury, and provided a biomechanical foundation for the identification of craniocerebral injury in legal contexts.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.