Objective To investigate the radon activity concentrations in subways of Nanning City and assess the average annual effective doses for subway staff and passengers due to radon exposure. Methods Sixty-three stations across the subway lines 2, 3, and 5 were selected as study sites. Radon activity concentrations were measured using the scintillation counting method with scintillation vials. Results The radon activity concentrations in subway lines 2, 3, and 5 were 7.9-24.4, 12.0-26.2, and 12.6-18.2 Bq/m³, respectively. The average radon activity concentrations for these three lines were (17.4 ± 4.6), (19.1 ± 4.1), and (14.6 ± 1.7) Bq/m³, respectively. Statistical analysis using SPSS 26.0 software revealed a significant difference in radon activity concentrations among these stations (P<0.01). Considering the data in previous research, the average radon activity concentration across all stations in the subway lines of Nanning City was determined to be 17.4 Bq/m³. The estimated average annual effective dose due to radon exposure was 0.131 mSv for subway staff and 0.033 mSv for passengers. Conclusion The radon activity concentrations in the subway lines of Nanning City were significantly lower than the national standard limit (400 Bq/m³). The annual effective doses from radon exposure for both subway staff and passengers were below the limits specified in the Basic Standards for Protection Against Ionizing Radiation and for the Safety of Radiation Sources (GB18871—2002). The health impact of radon and its progeny on subway staff and passengers in the subway lines of Nanning City was extremely low and can be considered negligible.

Metabolic reprogramming， as one of the core hallmarks of malignant tumors， plays a key role in the occurrence， development and treatment of breast cancer （BC）. Abnormal changes in glucose metabolism， amino acid metabolism， lipid metabolism， as well as the tricarboxylic acid （TCA） cycle and oxidative phosphorylation （OXPHOS） pathways significantly influence the pathogenesis and progression of BC. Studies have shown that various active components of traditional Chinese medicine （TCM） （such as berberine， matrine， quercetin， curcumin， etc.） and their compound formulations （e.g. Xihuang pill， Danzhi xiaoyao powder， Yanghe decoction， etc.） can inhibit the proliferation and migration of BC cells and induce apoptosis by regulating key metabolic pathways such as glycolysis， lipid synthesis， and amino acid metabolism. TCM demonstrates multi-target and holistic regulatory advantages in intervening in BC metabolic reprogramming， showing significant potential in modulating key molecules like hypoxia inducible factor-1α， hexokinase-2， pyruvate kinase M2， lactate dehydrogenase A， glucose transporter-1， fatty acid synthase， and signaling pathways such as AKT/mTOR. However， current researches still focus predominantly on glucose metabolism， with insufficient mechanistic studies on lipid metabolism， amino acid metabolism， the TCA cycle， and OXPHOS. The precise targets， molecular mechanisms， and clinical translation value of these interventions require further validation and clarification through more high-quality experimental studies and clinical trials.

Objective To analyze the urban drinking water quality and its influencing factors in Anhui Province from 2014 to 2022, and to provide a scientific basis for water quality improvement and protection. Methods The data were collected, saved and monitored according to the Standard Test Method for Drinking Water (GB/T5750-2006) and evaluated according to the Hygienic Standard for Drinking Water (GB 5749-2006). Results A total of 20 941 samples were collected, and the overall qualified rate was 84.26%. The qualified rate of urban drinking water increased from 76.9% in 2014 to 93.3% in 2022, and the qualified rate of water quality was on the rise (χ²=544.43, P＜0.01). From 2014 to 2022, the qualified rate of water quality in dry season was higher than that in wet season (χ²=35.98, P<0.001), the qualified rate of surface water was higher than that of ground water (χ²=4440.8, P<0.001), and the qualified rate of peripheral tap water was higher than that of factory water (χ²=145.1, P<0.001). Among all kinds of disinfection methods, chlorination disinfection had the highest qualified rate (χ²=1483.8, P<0.001). The qualified rate of water quality increased with the increase of the scale of water plant. Among the inspected indicators, the main unqualified indicators were chlorine dioxide (7.72%), fluoride (7.41%), free residual chlorine (3.90%), and total bacterial count (2.13%). Conclusion The passing rate of urban drinking water quality in Anhui Province is on an upward trend, and the quality of urban drinking water has improved. However, it is still important to pay attention to the problem of excessive microorganism and fluoride in water, and the quality of drinking water varies from place to place.

BACKGROUND:At present,research has only shown that the cervical lordosis ratio can be an important factor in predicting the loss of lordosis curvature after laminoplasty,and no one has studied whether the cervical lordosis ratio,a dynamic level indicator,can be one of the decision-making factors for the selection of posterior cervical surgical procedures. OBJECTIVE:To investigate whether the cervical lordosis ratio,an index of cervical hyperextension and hyperflexion,can be used as a selective index for laminoplasty and laminectomy fusion. METHODS:A retrospective review of 141 patients who had undergone posterior cervical surgery more than one year of follow-up due to multi-level cervical spondylotic myelopathy from December 2015 to March 2020 was performed.Among them,63 patients received laminectomy and fusion(laminectomy and fusion group)and 78 patients received laminoplasty(laminoplasty group).The demographic statistics(gender,age,body mass index,follow-up time),imaging indexes such as C2-7 Cobb angle,C2-7 range of motion,flexion Cobb angle,extension Cobb angle,flexion range of motion and extension range of motion,clinical effect indexes such as Japanese Orthopaedic Association score and visual analog scale score were compared between the two groups.The evaluation index of cervical lordosis alignment change was C2-7 Cobb angle difference before and after operation(ΔCL).Cervical lordosis ratio was equal to 100%×flexion range of motion/C2-7 range of motion.Receiver operating characteristic curve analysis was used to determine the role of cervical lordosis ratio in predicting postoperative severe cervical lordosis loss(ΔCL≤-10°).According to the critical value of cervical lordosis ratio(68.5%),all patients were divided into low cervical lordosis ratio group and high cervical lordosis ratio group.In these two ratio groups,the cervical lordosis alignment index and clinical effect index between the two operation groups were discussed again. RESULTS AND CONCLUSION:(1)Cervical lordosis alignment decreased after laminectomy and fusion and laminoplasty(P=0.039,P=0.002),and cervical lordosis alignment change in laminoplasty group(ΔCL)was greater than that of laminectomy and fusion group,and the difference between the two groups was statistically significant.(2)Based on receiver operating characteristic curve analysis,cervical lordosis ratio in predicting severe cervical lordosis alignment change(ΔCL≤-10°)had good identification ability(area under the curve=0.792).(3)In low cervical lordosis ratio group,there was no significant difference in cervical lordosis alignment change(ΔCL)between laminectomy and fusion group and laminoplasty group(P=0.141).(4)In high cervical lordosis ratio group,the ΔCL of laminoplasty group was greater than that in laminectomy and fusion group(P=0.001),which had a higher probability of postoperative severe cervical lordosis alignment change(ΔCL≤-10°)(43%,29%).(5)It is indicated that cervical lordosis ratio can be used as a decision-making index for the choice of posterior surgery for multi-level cervical spondylotic myelopathy.Laminoplasty can be considered in the low cervical lordosis ratio group,while laminectomy and fusion can be considered in the high cervical lordosis ratio group.

Intraoperative cell salvage (IOCS) has been widely applied as an important blood conservation measure in surgical operations. However, there is currently a lack of clinical practice guidelines for the implementation of IOCS in patients with malignant tumors. This report aims to provide clinicians with recommendations on the use of IOCS in patients with malignant tumors based on the review and assessment of the existed evidence. Data were derived from databases such as PubMed, Embase, the Cochrane Library and Wanfang. The guideline development team formulated recommendations based on the quality of evidence, balance of benefits and harms, patient preferences, and health economic assessments. This study constructed seven major clinical questions. The main conclusions of this guideline are as follows: 1) Compared with no perioperative allogeneic blood transfusion (NPABT), perioperative allogeneic blood transfusion (PABT) leads to a more unfavorable prognosis in cancer patients (Recommended); 2) Compared with the transfusion of allogeneic blood or no transfusion, IOCS does not lead to a more unfavorable prognosis in cancer patients (Recommended); 3) The implementation of IOCS in cancer patients is economically feasible (Recommended); 4) Leukocyte depletion filters (LDF) should be used when implementing IOCS in cancer patients (Strongly Recommended); 5) Irradiation treatment of autologous blood to be reinfused can be used when implementing IOCS in cancer patients (Recommended); 6) A careful assessment of the condition of cancer patients (meeting indications and excluding contraindications) should be conducted before implementing IOCS (Strongly Recommended); 7) Informed consent from cancer patients should be obtained when implementing IOCS, with a thorough pre-assessment of the patient's condition and the likelihood of blood loss, adherence to standardized internally audited management procedures, meeting corresponding conditions, and obtaining corresponding qualifications (Recommended). In brief, current evidence indicates that IOCS can be implemented for some malignant tumor patients who need allogeneic blood transfusion after physician full evaluation, and LDF or irradiation should be used during the implementation process.

Objective To analyze the health effects of long-term occupational exposure to ionizing radiation on radiation workers in a nuclear power plant, and to provide a scientific basis for their occupational health monitoring. Methods In 2023, 183 radiation workers in a nuclear power plant were subjected to the analysis of blood cell parameters such as mean red blood cell count, white blood cell count (WBC), lymphocyte count, and hemoglobin count, thyroid function indicators such as serum triiodothyronine, thyroxine, and thyrotropin, as well as the chromosomal aberration rate and micronucleus rate of the lymphocytes in the peripheral blood. Results The blood cell parameters, thyroid function indicators, chromosomal aberration rate, and micronucleus rate of these radiation workers in the nuclear power plant were within normal reference ranges. Comparison among radiation workers with different ages showed statistically significant differences in triiodothyronine (H = 6.98, P < 0.05) and micronucleus rate (H = 48.44, P < 0.05). Among the three groups of radiation workers with different working years, WBC was significantly different (χ² = 3.87, P < 0.05), with the lowest WBC observed in radiation workers with ≥ 20 years of service. Thyroxine (χ² = 4.01, P < 0.05) and micronucleus rate (H = 40.95, P < 0.05) also varied significantly among these three groups. Conclusion Thyroid triiodothyronine level and micronucleus rate were affected by age, while WBC, thyroid thyroxine level, and micronucleus rate were related to working years. Targeted health management should be carried out for radiation workers in nuclear power plants to improve the awareness of radiation protection and continuously enhance their health status.

In this study,an ON/OFF type micro-valve with a sandwich(glass-silicon-glass)structure was designed and fabricated based on the micro-electro-mechanical system(MEMS)technique.The deformable membrane of this micro-valve was prepared on the silicon on insulator(SOI)substrate and sealed using Si-Si bonding and anodic bonding methods.The micro-valve had high-temperature stability and was suitable for integration with other gas chromatography components.The deformable membrane with a thickness of 10 μm was processed on the top silicon of the SOI substrate.The flow control of the micro-valve could be achieved by changing the driving pressure applied to the deformable membrane to deform it.Compared with polymer membranes,the deformable membrane prepared on the top layer silicon of SOI had better temperature stability and could be released using the deep reactive ion etching technique after silicon-silicon bonding,avoiding deformation during the preparation process.In addition,due to the small gap between the membrane and the inlet/outlet holes,the dead volume of the microvalve was very small.The test results indicated that the micro-valve achieved flow control and ON/OFF functions with good repeatability.

A monolithic integrated gas chromatography chip,consisting of a micro gas chromatography column(μGCC)and a micro helium discharge ionization detector(μHDID)was proposed.The chip was fabricated using micro electromechanical system(MEMS)technique,and its sensitivity was improved from two aspects.On one hand,open tubular column was selected as the separation device,and the auxiliary helium channel width of μHDID was modulated based on the microchannel width of the μGCC to match the flow rates of μHDID and μGCC.On the other hand,the electrode structure inside the μHDID collection zone was optimized,a bias electrode group around the collection electrode was constructed,and the ion collection efficiency was improved.After coating HKUST-1 as the stationary phase,the monolithic integrated gas chromatography chip could achieve baseline separation and detection of light hydrocarbon gas mixture(methane,ethane,propane,andn-butane),with a detection limit for propane as low as 25 pg.The chip could carried out test under temperature-programmed conditions,with a resolution of 9.24 for ethane and propane.

In this work,a fluorescent probe PIN was synthesized using indole-3-carbohydrazide and pyrenecarboxaldehyde as raw materials.PIN showed weak fluorescence emission in aqueous solution with acetonitrile volume fraction of 70％.However,when Cu2+was added to this aqueous solution of PIN,a new fluorescence emission peak appeared at 495 nm,and the intensity of this peak gradually increased with the increase of concentration of Cu2+,and also caused a significant change in the fluorescence color of the solution.In contrast,the addition of 15 kinds of other common metal ions did not cause such change.The detection limit of PIN for Cu2+was 78.7 nmol/L,which was much lower than the maximum permitting level of Cu2+in drinking water in hygienic standard for drinking water in China.Therefore,PIN was a highly selective and sensitive fluorescence-enhanced probe for Cu2+.Meanwhile,the addition of Cu2+could also cause a new absorption peak at 440 nm in the ultraviolet-visible absorption spectrum of the aqueous solution of PIN,and meanwhile the colorless PIN solution changed into yellow,exhibiting the performance of PIN as a colorimetric probe for Cu2+.By fitting with the Levenberg-Marquardt algorithm equation,the binding ratio of PIN to Cu2+was 2:1,and the binding constant was 3.42×1012 L2/mol2.In addition,the binding mode of PIN with Cu2+was explored by using proton nuclear magnetic resonance(1H NMR)titration experiments and density functional theory simulations.The results showed that the addition of Cu2+could cause the aggregation of PIN molecules to form excimers,thus showing highly selective recognition.Finally,PIN was made into a simple test strip,which could achieve rapid and convenient fluorescence detection of Cu2+in actual water samples.

Introducing fingerprint level 3 features(especially sweat pores)in fingerprint recognition can significantly improve the value of fingerprints.However,conventional fingerprint visualization methods suffer from issues such as poor stability and reproducibility,insufficient resolution,and feature masking in detecting level 3 features.Electrospun membrane has unique advantages in latent fingerprint(LFP)detection due to its excellent adsorption performance and high specific surface area,and thus its application potential in LFP visualization urgently need to be explored.A novel pore visualization method based on core-shell structured PAN-Flu/PVP composite nanofibrous membrane was proposed in this work.Specifically,the PAN-Flu/PVP composite nanofibrous membrane was prepared via coaxial electrospinning technology,with polyacrylonitrile(PAN)loaded with fluorescein(Flu)as the core and polyvinylpyrrolidone(PVP)as the shell.The experimental results showed that the prepared PAN Flu/PVP composite nanofibrous membrane had a porous structure and excellent adsorption performance.Based on the water solubility of the outer shell PVP and the water induced fluorescence enhancement effect of the core Flu,high-resolution visualization of sweat pores could be achieved within 2 s.The optimization experiment showed that the best quality of sweat latent fingerprints was obtained when the Flu content was 4 mg/mL,the spinning time was 1 h,and the sweating time was 2 min.Through repeated fingerprinting and live fingerprint comparison experiment,the strong stability and high reproducibility of the as-produced membrane in displaying fingerprint sweat pores were finally verified.In summary,the development method could quickly,stably and accurately extract the spatial distribution and activity level of fingerprint sweat pores,which was of great significance for improving the utilization and value of fingerprints.