BACKGROUND:Cervical disc herniation can cause pain in the neck and shoulder area,as well as radiating pain in the upper limbs.The incidence rate is increasing year by year and tends to affect younger individuals.Fully understanding the biomechanical characteristics of the cervical spine in adolescents is of great significance for preventing and delaying the onset of cervical disc herniation in this age group. OBJECTIVE:To reconstruct cervical spine models for both healthy adolescents and adolescent patients with cervical disc herniation utilizing finite element analysis techniques,to analyze the motion range of the C1-T1 cervical vertebrae as well as the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and the cartilage of the small joints. METHODS:A normal adolescent's cervical spine and an adolescent patient with cervical disc herniation were selected in this study.The continuous scan cervical spine CT raw image data were imported into Mimics 21.0 in DICOM format.The C1-T1 vertebrae were reconstructed separately.Subsequently,the established models were imported into the 3-Matic software for disc reconstruction.The perfected models were then imported into Hypermesh software for meshing of the vertebrae,nucleus pulposus,annulus fibrosus,and ligaments,creating valid geometric models.After assigning material properties,the final models were imported into ABAQUS software to observe the joint motion range of the C1-C7 cervical vertebrae segments under different conditions,and to analyze the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and small joint cartilage of each cervical spine segment. RESULTS AND CONCLUSION:(1)In six different conditions,the joint motion range of the C1 vertebra in the cervical spine models of both normal adolescent and adolescent patient with cervical disc herniation was higher than that of the other vertebrae.Additionally,the joint motion range of each cervical spine segment in normal adolescent was greater than that in adolescent patient with cervical disc herniation.(2)In the cervical spine model of normal adolescent,the maximum stress values in the annulus fibrosus and nucleus pulposus were found on the left side during C2-3 flexion conditions(0.43 MPa and 0.17 MPa,respectively).In the cervical spine model of adolescent patient with cervical disc herniation,the maximum stress values were found on the left side during C7-T1 flexion conditions(0.54 MPa and 0.18 MPa,respectively).(3)In the cervical spine model of normal adolescent,the maximum stress value on the endplate was found on the left side of the upper endplate of C3 during flexion conditions(1.46 MPa).In the model of adolescent patient with cervical disc herniation,the maximum stress value on the endplate was found on the left side of the lower endplate of C7 during flexion conditions(1.32 MPa).(4)In the cervical spine model of normal adolescent,the maximum stress value in the small joint cartilage was found in the C2-3 left rotation conditions(0.98 MPa).In adolescent patient with cervical disc herniation,the stress in the small joint cartilage significantly increased under different conditions,especially in C1-2,with the maximum stress found during left flexion(3.50 MPa).(5)It is concluded that compared to normal adolescent,adolescent patient with cervical disc herniation exhibits altered cervical curvature and a decrease in overall joint motion range in the cervical spine.In adolescent with cervical disc herniation,there is a significant increase in stress on the annulus fibrosus,nucleus pulposus,and endplates in the C7-T1 segment.The stress on the left articular cartilage of the C1-2 is notable.Abnormal cervical curvature may be the primary factor causing these stress changes.

BACKGROUND: Generalized pustular psoriasis (GPP), a rare and recurrent autoinflammatory disease, imposes a substantial burden on patients and society. Awareness of GPP in China remains limited. METHODS: This cross-sectional survey, conducted between September 2021 and May 2023 across 14 hospitals in China, included GPP patients of all ages and disease phases. Data collected encompassed demographics, clinical characteristics, economic impact, disease severity, quality of life, and treatment-related complications. Risk factors for GPP recurrence were analyzed. RESULTS: Among 127 patients (female/male ratio = 1.35:1), the mean age of disease onset was 25 years (1st quartile [Q1]-3rd quartile [Q3]: 11-44 years); 29.2% had experienced GPP for more than 10 years. Recurrence occurred in 75.6% of patients, and nearly half reported no identifiable triggers. Younger age at disease onset ( P  = 0.021) and transitioning to plaque psoriasis ( P  = 0.022) were associated with higher recurrence rates. The median diagnostic delay was 8 months (Q1-Q3: 2-41 months), and 32.3% of patients reported misdiagnoses. Comorbidities were present in 53.5% of patients, whereas 51.1% experienced systemic complications during treatment. Depression and anxiety affected 84.5% and 95.6% of patients, respectively. During GPP flares, the median Dermatology Life Quality Index score was 19.0 (Q1-Q3: 13.0-23.5). This score showed significant differences between patients with and without systemic symptoms; it demonstrated correlations with both depression and anxiety scores. Treatment costs caused financial hardship in 55.9% of patients, underscoring the burden associated with GPP. CONCLUSIONS The substantial disease and economic burdens among Chinese GPP patients warrant increased attention. Patients with early onset disease and those transitioning to plaque psoriasis require targeted interventions to mitigate the high recurrence risk.
Humans ; Male ; Female ; Psoriasis/pathology* ; Adult ; Cross-Sectional Studies ; Adolescent ; Child ; Young Adult ; Quality of Life ; Middle Aged ; China/epidemiology* ; Recurrence ; Risk Factors ; Surveys and Questionnaires ; East Asian People

Callicarpa is an important medicinal plant in China, which has hemostatic, antibacterial, and antioxidant pharmacological effects, and the efficacy of astringing and arresting bleeding, clearing heat and detoxification, activating blood, and resolving stasis is outstanding. At the same time, Callicarpa can be used as an ornamental plant because of its gorgeous flowers and fruits. Callicarpa has good market development prospects, but the long seed reproduction cycle directly limits the large demand for seedlings in its industrial development. Asexual reproduction technology is the basis for the industrialization development of Callicarpa, which is helpful in producing high-quality seedlings and medicinal materials. Although Chinese and foreign scholars have achieved remarkable results in the study of asexual reproduction of Callicarpa, there is no report on the large-scale production of seedlings of Callicarpa. Integrating and improving its asexual reproduction technology can promote the development and utilization of Callicarpa, improve its medicinal value, and create significant economic benefits. Therefore, the authors reviewed the effects of cutting, season, plant growth regulators, substrates, environment, and management measures on the cutting of Callicarpa and the research progress of tissue culture propagation affected by explants, basic media, exogenous additives, subculture cycles, culture conditions, and transplanting substrates. The mechanism of adventitious root formation was reviewed at the cellular, physiological, and biochemical levels, so as to put forward the problems and corresponding solutions in the study of asexual propagation technology and regulatory mechanism of Callicarpa and point out the future research directions. The study aims to provide a reference for in-depth research on the asexual propagation technology of Callicarpa and the commercial production of its high-quality seedlings.
Reproduction, Asexual ; Plants, Medicinal/physiology* ; Seedlings/growth & development* ; Tissue Culture Techniques

This study aims to explore the medication rules and mechanisms of treating chronic renal failure(CRF) by Jinling medical school based on data mining, network pharmacology, and experimental validation systematically and deeply. Firstly, the study selected the papers published by the inherited clinicians in Jinling medical school in Chinese journals using the subject headings named "traditional Chinese medicine(TCM) + chronic renal failure", "TCM + chronic renal inefficiency", or "TCM + consumptive disease" in China National Knowledge Infrastructure, Wanfang, and VIP Chinese Science and Technology Periodical Database and screened TCM formulas for treating CRF according to inclusion and exclusion criteria. The study analyzed the frequency of use of single TCM and the four properties, five tastes, channel tropism, and efficacy of TCM used with high frequency and performed association rule and clustering analysis, respectively. As a result, a total of 215 TCM formulas and 235 different single TCM were screened, respectively. The TCM used with high frequency included Astragali Radix, Rhei Radix et Rhizoma, Salviae Miltiorrhizae Radix et Rhizoma, Poria, and Atractylodis Macrocephalae Rhizoma(top 5). The single TCM characterized by "cold properties, sweet flavor, and restoring spleen channel" and the TCM with the efficacy of tonifying deficiency had the highest frequency of use, respectively. Then, the TCM with the rules of "blood-activating and stasis-removing" and "diuretic and dampness-penetrating" appeared. In addition, the core combination of TCM [(Hexin Formula, HXF)] included "Astragali Radix, Rhei Radix et Rhizoma, Poria, Salviae Miltiorrhizae Radix, and Angelicae Sinensis Radix". The network pharmacology analysis showed that HXF had 91 active compounds and 250 corresponding protein targets including prostaglandin-endoperoxide synthase 2(PTGS2), PTGS1, sodium voltage-gated channel alpha subunit 5(SCN5A), cholinergic receptor muscarinic 1(CHRM1), and heat shock protein 90 alpha family class A member 1(HSP90AA1)(top 5). Gene Ontology(GO) function analysis revealed that the core targets of HXF predominantly affected biological processes, cellular components, and molecular functions such as positive regulation of transcription by ribonucleic acid polymerase Ⅱ and DNA template transcription, formation of cytosol, nucleus, and plasma membrane, and identical protein binding and enzyme binding. Kyoto Encyclopedia of Genes and Genomes(KEGG) analysis revealed that CRF-related genes were involved in a variety of signaling pathways and cellular metabolic pathways, primarily involving "phosphatidylinositol 3-kinase(PI3K)-protein kinase B(Akt) pathway" and "advanced glycation end products-receptor for advanced glycation end products". Molecular docking results showed that the active components in HXF such as isomucronulatol 7-O-glucoside, betulinic acid, sitosterol, and przewaquinone B might be crucial in the treatment of CRF. Finally, a modified rat model with renal failure induced by adenine was used, and the in vivo experimental confirmation was performed based on the above-mentioned predictions. The results verify that HXF can regulate mitochondrial autophagy in the kidneys and the PI3K-Akt-mammalian target of rapamycin(mTOR) signaling pathway activation at upstream, so as to alleviate renal tubulointerstitial fibrosis and then delay the progression of CRF.
Data Mining ; Drugs, Chinese Herbal/chemistry* ; Network Pharmacology ; Humans ; Kidney Failure, Chronic/metabolism* ; Medicine, Chinese Traditional ; China

As a new type of production factor that can empower the development of new quality productivity, the data element is an important engine to promote the high quality development of the industry. Traditional Chinese medicine(TCM) dispensing is the most basic work of TCM clinical pharmacy, and its quality directly affects the clinical efficacy of TCM. The integration of data elements and TCM dispensing can stimulate the innovation and vitality of the TCM dispensing industry and promote the high-quality and sustainable development of the industry. A large-scale, detailed, and systematic study on TCM dispensing was conducted. The innovative practice path of data fusion construction in the whole process of TCM dispensing was investigated by integrating the digital resources "nine full activities" of TCM dispensing, creating the digital dictionary of "TCM clinical information data elements", and exploring innovative applications of TCM dispensing driven by data and technology, so as to promote the standardized, digital, and intelligent development of TCM dispensing in medical health services. The research content of this project was successfully selected as the second batch of "Data element×" typical cases of National Data Administration in 2024, which is the only selected case in the field of TCM.
Medicine, Chinese Traditional/methods* ; Drugs, Chinese Herbal ; Humans

This study aims to investigate the polarized microscopic mineral phase characteristics, inorganic element content, and potential health risks associated with the intake of raw and calcined fossil mineral Chinese medicinal material Draconis Os. Microscopy was employed to observe the mineralogical characteristics of Draconis Os and compare the microscopic features and phase composition of raw and calcined Draconis Os under monochromatic and orthogonal polarized light. Inductively coupled plasma mass spectrometry(ICP-MS) was employed to determine the content of 30 inorganic elements. Health risk assessment was conducted by calculating the single pollution index(P_i), average daily intake of elements for adults(ADI), target hazard quotient(THQ), non-carcinogenic assessment method-hazard quotient(HQ), and the carcinogenic risk of elements(CR). The results indicated that under monochromatic polarized light, the Draconis Os powder sections exhibited light gray-brown to gray-brown irregular fragments, some with undulating textures that were slightly curved. Under crossed polarized light, they appeared dark gray, grayish-white, and yellowish-white. Clear apatite was visible in the ground sections of Draconis Os under crossed polarized light. P_i results indicated that Draconis Os samples were free from contamination and were of good quality. According to the maximum allowable limits of heavy metals stipulated in ISO Traditional Chinese Medicine: Determination of heavy metals in herbal medicines used in Traditional Chinese Medicine, ADI, THQ, HQ, and CR were taken as assessment indicators. Only the THQ value for As(arsenic) in raw Draconis Os was greater than 1, while the THQ values for other heavy metal elements in the Draconis Os samples were all less than 1. The study demonstrates that the primary mineral phase of raw and calcined Draconis Os is apatite, with some samples co-existing with calcite, which can serve as one of the means for quality control of Draconis Os. The elemental analysis results from ICP-MS provide scientific evidence for the safety assessment of Draconis Os, indicating that Draconis Os is safe in clinical application.
Drugs, Chinese Herbal/analysis* ; Risk Assessment ; Minerals/chemistry* ; Fossils ; Humans ; Drug Contamination ; Mass Spectrometry

OBJECTIVE: To explore the epidemiological characteristics of knee osteoarthritis (KOA) among the elderly in the community, and its correlation with bone mass loss. METHODS: A cross-sectional study was conducted on elderly community population over 50 year old from 12 community health service centers in Zhejiang province. Their gender, age, body mass index (BMI), T value and KOA diagnosis were collected using face to face questionnaire survey. Univariate regression was used to analyze the influence of age, gender, BMI and bone loss on KOA. Logistic multivariate regression model was used to analyze the independent effect of bone mass loss on KOA. RESULTS: Among 4 173 subjects in this study, 1 710 of them were had a KOA. The prevalence rate was 40.9%. The mean age, the proportion of females and the mean BMI in KOA patients were (65.5±3.8) years old, 67.7%(1 158/1 710) and(24.59±1.28) kg·m^-2, respectively, which were significantly higher than (58.5±3.2) years old, 51.3%(1 263/2 463), and (23.48±1.25) kg·m^-2 in non-KOA subjects (P<0.001). In the population aged from 60 to 69 years old, the influence of osteopenia and osteoporosis on the prevalence of KOA was[OR=1.21, 95%CI(1.00, 1.46), P=0.053 2], [OR=1.42, 95%CI(1.14, 1.78), P=0.002 2]. The influence of male and female osteoporosis on the prevalence of KOA was [OR=1.52, 95%CI(1.16, 1.99), P=0.002 7] and [OR=1.87, 95%CI(1.51, 2.32), P<0.000 1], respectively. In the population of 24 kg·m^-2≤BMI<28 kg·m^-2, the influence of osteopenia and osteoporosis on the prevalence of KOA was [OR=1.47, 95%CI(1.21, 1.80), P=0.000 1], [OR=2.69, 95%CI(2.11, 3.42), P<0.000 1], respectively. After controlling the confounding factors of age, gender and BMI, compared with people with normal bone mass, the effect of osteopenia on the prevalence of KOA was [OR=1.34, 95%CI(1.08, 1.67), P=0.009 2], and the effect of osteoporosis on the prevalence of KOA was [OR=1.38, 95%CI(1.06, 1.79), P=0.017 9]. CONCLUSION Elderly overweight women are more likely to develop KOA. Bone mass loss is an independent risk factor for KOA, which will significantly increase the prevalence of KOA in people overweight or aged 60 to 69 years old.
Humans ; Female ; Male ; Aged ; Osteoarthritis, Knee/etiology* ; Middle Aged ; Cross-Sectional Studies ; Bone Density ; Aged, 80 and over ; Incidence ; Body Mass Index ; China/epidemiology* ; Osteoporosis/epidemiology*

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome