Myasthenia gravis is an autoimmune disorder characterized by impaired neuromuscular transmission. Thymectomy is one of the therapeutic options for acetylcholine receptor antibody-positive myasthenia gravis patients. The quality of perioperative care is directly associated with surgical safety and patient outcomes. However, there is currently a lack of specialized nursing consensus or guidelines specifically addressing the care of these patients domestically or internationally. To promote the standardization and normalization of perioperative nursing care for myasthenia gravis patients undergoing thymectomy and to ensure treatment efficacy, a panel of 57 experts from relevant fields was convened. Based on evidence-based medicine and clinical practice experience, discussions were held on various aspects including condition assessment, nutritional support, medication management, and airway care, resulting in a consensus with 18 final recommendations by using the Delphi method through two rounds of expert consultation. This consensus aims to provide a scientific reference for the perioperative nursing care of myasthenia gravis patients undergoing thymectomy.

Objective: To analyze the change trends in the body shape indicators and proportions of students in Harbin from 2010 to 2024, and to investigate ergonomic compatibility of functional dimensions of school desks and chairs with current student shape indicators, so as to provide a reference for revising furniture standards of desks and chairs. Methods: Between September and November of both 2010 and 2024, a combination of convenience sampling and stratified cluster random sampling was conducted across three districts in Harbin, yielding samples of 6 590 and 6 252 students, respectively. Anthropometric shape indicators cluding height, sitting height, crus length, and thigh length-and their proportional changes were compared over the 15-year period. The 2024 data were compared with current standard functional dimensions of school furniture. The statistical analysis incorporated t-test and Mann-Whitney U- test. Results: From 2010 to 2024, average height increased by 1.8 cm for boys and 1.5 cm for girls; sitting height increased by 1.5 cm for both genders; crus length increased by 0.3 cm for boys and 0.4 cm for girls; and thigh length increased by 0.5 cm for both genders. The ratios of sitting height to height, and sitting height to leg length increased by less than 0.1 . The difference between desk chair height and 1/3 sitting height ranged from 0.4-0.8 cm. Among students matched with size 0 desks and chairs, 22.0% had a desk to chair height difference less than 0, indicating that the desk to chair height difference might be insufficient for taller students. The differences between seat height and fibular height ranged from -1.4 to 1.1 cm; and the differences between seat depth and buttock popliteal length ranged from -9.8 to 3.4 cm. Among obese students, the differences between seat width and 1/2 hip circumference ranged from -20.5 to -8.7 cm, while it ranged from -12.2 to -3.8 cm among non obese students. Conclusion Current furniture standards basically satisfy hygienic requirements; however, in the case of exceptionally tall and obese students, ergonomic accommodations such as adaptive seating allocation or personalized adjustments are recommended to meet hygienic requirements.

Vascular cognitive impairment (VCI), caused by cerebrovascular dysfunction, severely impacts the quality of life in the elderly population, yet effective therapeutic approaches remain limited. Mitophagy, a selective mitochondrial quality-control mechanism, has emerged as a critical focus in neurological disease research. Accumulating evidence indicates that mitophagy modulates oxidative stress, neuroinflammation, and neuronal apoptosis. Key signaling pathways associated with mitophagy—including PINK1/Parkin, BNIP3/Nix, FUNDC1, PI3K/Akt/mTOR, and AMPK—have been identified as potential therapeutic targets for VCI. This review summarizes the mechanistic roles of mitophagy in VCI pathogenesis and explores emerging therapeutic strategies targeting these pathways, aiming to provide novel insights for clinical intervention and advance the development of effective treatments for VCI.

Objective: To explore the comorbidity and associated factors of dental caries and overweight/obesity among primary and secondary school students in Guangxi, so as to provide a scientific basis for the development of targeted prevention strategies. Methods: A stratified cluster random sampling method was used to survey 178 700 students from the fourth grade of primary school to the third year of high school in Guangxi Zhuang Autonomous Region from September to November 2023, including physical examination, oral screening, and questionnaire survey. Chisquare tests and binary Logistic regression analysis were employed to investigate the related factors of the cooccurrence of dental caries and overweight/obesity among students. Results: The comorbidity rate of dental caries and overweight/obesity was 9.55%, with urban areas (9.95%) higher than rural counties (9.24%), boys (10.54%) higher than girls (8.54%), primary school students (11.49%) higher than senior high school students (8.92%) and junior high school students (8.05%), and nonboarding students (11.44%) higher than boarding students (7.94%), and all differences were statistically significant (χ2=26.07, 207.91, 471.54, 629.14,P<0.01). Multivariate Logistic regression analysis showed that consuming cereal for breakfast (OR=0.91, 95%CI=0.88-0.94), drinking milk in the past week (OR=0.89, 95%CI=0.83-0.95), meeting sleep standards (OR=0.95, 95%CI=0.91-0.99), and brushing teeth at least once a day (OR=0.82, 95%CI=0.73-0.93) had a lower risk of the comorbidity of dental caries and overweight/obesity. In contrast, drinking beverages in the past week (OR=1.14, 95%CI=1.09-1.20), consuming fried foods in the past week (OR=1.11, 95%CI=1.06-1.17), eating fruit ≥1 time every day (OR=1.06, 95%CI=1.02-1.11), consuming fruit ≥1 type every day (OR=1.07, 95%CI=1.01-1.12), and having fish, poultry, meat, or eggbased breakfasts (OR=1.03, 95%CI=1.05-1.13) had a higher risk of the comorbidity of dental caries and overweight/obesity (P<0.05). Conclusions Dietary habits and lifestyle behaviors are associated with the comorbidity of dental caries and overweight/obesity among primary and secondary school students in Guangxi. Guiding students to form healthy living habits is helpful to preven dental caries and overweight/obesity.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

The Consolidated Standards of Reporting Trials (CONSORT) statement aims to enhance the quality of reporting for randomized controlled trial (RCT) by providing a minimum item checklist. It was first published in 1996, and updated in 2001 and 2010, respectively. The latest version was released in April 2025, continuously reflecting new evidence, methodological advancements, and user feedback. CONSORT 2025 includes 30 essential checklist items and a template for a participant flow diagram. The main changes to the checklist include the addition of 7 items, revision of 3 items, and deletion of 1 item, as well as the integration of multiple key extensions. This article provides a comprehensive interpretation of the statement, aiming to help clinical trial staff, journal editors, and reviewers fully understand the essence of CONSORT 2025, correctly apply it in writing RCT reports and evaluating RCT quality, and provide guidance for conducting high-level RCT research in China.