BACKGROUND:Osteoporotic vertebral fractures are the most common complication in patients with osteoporosis.As a new imaging technique,spine magnetic resonance imaging(MRI)is much more sensitive than X-ray film in the diagnosis of osteoporotic vertebral fractures.However,total spine MRI is costly and takes a long time to scan.Therefore,there is no consensus on whether all patients with osteoporotic vertebral fractures need to undergo total spine MRI scan and which patients need to undergo total spine MRI. OBJECTIVE:To analyze the distribution characteristics of vertebral fractures and explore their clinical significance by observing the whole spine MRI data of osteoporotic vertebral fractures patients. METHODS:Data of cases and MRI images of all patients diagnosed with fresh osteoporotic vertebral fractures who visited the Department of Orthopedics,Affiliated Hospital of Southwest Medical University from August 2018 to September 2022 were retrospectively analyzed.903 patients were included in the study based on inclusion and exclusion criteria.General information(age,gender,and body mass index),medical history characteristics(duration of illness,history of trauma surgery,percussion pain area,and pain score)were collected.The characteristics of vertebral fractures were analyzed through whole spine magnetic resonance imaging.Firstly,based on the number of vertebral fractures in patients,they were divided into the single vertebral fracture group(484 cases)and the multi-vertebral fracture group(419 cases),and the differences were analyzed between the two groups.Then,based on whether the farthest interval between the fractured vertebrae was greater than or equal to 5,the multi vertebral fracture group was further divided into two subgroups.Among them,Group A(the farthest interval between the fractured vertebrae was less than 5)contained 306 cases;Group B(with the farthest interval between fractured vertebral bodies greater than 5)included 113 cases.The differences were analyzed between two subgroups. RESULTS AND CONCLUSION:(1)Among 903 patients,419 patients(46.4%)had more than two fractured vertebrae.There were 654 patients(72.4%)with thoracolumbar fractures,and 54 patients(6%)with fractures in the thoracic plus lumbar region and the entire thoracic to lumbar region.In group B,96.5%of patients had multiregional percussion pain.(2)Compared with the patients in the single vertebral fracture group and the multi-vertebral fracture group,there were significant differences in bone mineral density,whether the medical history was greater than or equal to 1 month,the history of low energy injury,and the distribution and number of axial percussion pain areas in the spine during physical examination between the two groups(P<0.05).Age,gender,body mass index,whether there was underlying disease,pain visual analog scale score,whether there was a history of elderly thoracolumbar fracture,and whether there was a history of thoracolumbar surgery,and the number of fractured vertebrae had no statistical significance(P>0.05).(3)There were statistically significant differences between the Groups A and B in bone mineral density,the distribution and quantity of percussion pain area,and the history of low energy injury(P<0.05).There were no significant differences in age,gender,history of old fractures,visual analog scale score,body mass index,whether the medical history was longer than or equal to 1 month,history of underlying diseases,and history of thoracolumbar surgery between the two groups(P>0.05).(4)Patients with multiple low-energy trauma history,history of more than 1 month,multiple percussion pain,and the lower bone mineral density should be alert to the occurrence of multiple vertebral fracture and jump fracture.We recommend the whole spinal MRI for these patients.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective To evaluate the efficacy and safety of brexpiprazole in treating acute schizophrenia.Methods Patients with schizophrenia were randomly divided into treatment group and control group.The treatment group was given brexpiprozole 2-4 mg·d-1 orally and the control group was given aripiprazole 10-20 mg·d-1orally,both were treated for 6 weeks.Clinical efficacy of the two groups,the response rate at endpoint,the changes from baseline to endpoint of Positive and Negative Syndrome Scale(PANSS),Clinical Global Impression-Improvement(CGI-S),Personal and Social Performance scale(PSP),PANSS Positive syndrome subscale,PANSS negative syndrome subscale were compared.The incidence of treatment-related adverse events in two groups were compared.Results There were 184 patients in treatment group and 186 patients in control group.After treatment,the response rates of treatment group and control group were 79.50％(140 cases/184 cases)and 82.40％(150 cases/186 cases),the scores of CGI-I of treatment group and control group were(2.00±1.20)and(1.90±1.01),with no significant difference(all P＞0.05).From baseline to Week 6,the mean change of PANSS total score wese(-30.70±16.96)points in treatment group and(-32.20±17.00)points in control group,with no significant difference(P＞0.05).The changes of CGI-S scores in treatment group and control group were(-2.00±1.27)and(-1.90±1.22)points,PSP scores were(18.80±14.77)and(19.20±14.55)points,PANSS positive syndrome scores were(-10.30±5.93)and(-10.80±5.81)points,PANSS negative syndrome scores were(-6.80±5.98)and(-7.30±5.15)points,with no significant difference(P＞0.05).There was no significant difference in the incidence of treatment-related adverse events between the two group(69.00％vs.64.50％,P＞0.05).Conclusion The non-inferiority of Brexpiprazole to aripiprazole was established,with comparable efficacy and acceptability.

Hypertriglyceridemia-associated acute pancreatitis is an inflammatory disorder of exocrine pancreas caused by metabolism disturbances of triglyceride-rich lipoproteins.Currently,hypertriglyceridemia-associated acute pancreatitis is characterized by an escalating incidence rate,a tendency for more severe cases,and a lack of therapeutic drugs.Traditional Chinese medicine has distinct advantages in treating this disease,but its theoretical framework has not yet been established.Hypertriglyceridemia-associated acute pancreatitis manifests itself as a febrile disease,aberrant accumulation of fat and turbidity may stem from dietary imbalances and visceral dysfunction in ordinary individuals.The prolonged accumulation of fat and turbidity can transform into turbid pathogen,subsequently engendering heat,constituting a pivotal pathogenic factor.Throughout the progression of the disease,the fiery pathogen consumes the fat and turbidity,resulting in the generation of toxic heat,which is a crucial mechanism in the exacerbation of the disease severity.Thus,this article posits therapeutic principles aimed at averting the transformation of fat and turbidity into turbid pathogen and counteracting toxic heat in this disease.This article reviews two key theories from traditional Chinese medicine classics relevant to hypertriglyceridemia-associated acute pancreatitis:the theory of fat-turbidity associated with hypertriglyceridemia and the febrile disease related to acute pancreatitis.Combining these traditional theories with modern research on the mechanisms that intensify hypertriglyceridemia-associated acute pancreatitis and the corresponding targets of traditional Chinese medicine,it suggests that the pathogenesis of"fat-turbidity-toxic heat"serves as the theoretical basis of traditional Chinese medicine for the aggravated severity of hypertriglyceridemia-associated acute pancreatitis.The article aims to offer new insights for the treatment of hypertriglyceridemia-associated acute pancreatitis.

Umbilical cord mesenchymal stem cells (UC-MSCs) have been widely used in regenerative medicine, but there is limited research on the stability of UC-MSCs formulation during production. This study aims to assess the stability of the cell stock solution and intermediate product throughout the production process, as well as the final product following reconstitution, in order to offer guidance for the manufacturing process and serve as a reference for formulation reconstitution methods. Three batches of cell formulation were produced and stored under low temperature (2-8 ℃) and room temperature (20-26 ℃) during cell stock solution and intermediate product stages. The storage time intervals for cell stock solution were 0, 2, 4, and 6 h, while for intermediate products, the intervals were 0, 1, 2, and 3 h. The evaluation items included visual inspection, viable cell concentration, cell viability, cell surface markers, lymphocyte proliferation inhibition rate, and sterility. Additionally, dilution and culture stability studies were performed after reconstitution of the cell product. The reconstitution diluents included 0.9% sodium chloride injection, 0.9% sodium chloride injection + 1% human serum albumin, and 0.9% sodium chloride injection + 2% human serum albumin, with dilution ratios of 10-fold and 40-fold. The storage time intervals after dilution were 0, 1, 2, 3, and 4 h. The reconstitution culture media included DMEM medium, DMEM + 2% platelet lysate, 0.9% sodium chloride injection, and 0.9% sodium chloride injection + 1% human serum albumin, and the culture duration was 24 h. The evaluation items were viable cell concentration and cell viability. The results showed that the cell stock solution remained stable for up to 6 h under both low temperature (2-8 ℃) and room temperature (20-26 ℃) conditions, while the intermediate product remained stable for up to 3 h under the same conditions. After formulation reconstitution, using sodium chloride injection diluted with 1% or 2% human serum albumin maintained a viability of over 80% within 4 h. It was observed that different dilution factors had an impact on cell viability. After formulation reconstitution, cultivation in medium with 2% platelet lysate resulted in a cell viability of over 80% after 24 h. In conclusion, the stability of cell stock solution within 6 h and intermediate product within 3 h meets the requirements. The addition of 1% or 2% human serum albumin in the reconstitution diluent can better protect the post-reconstitution cell viability.

ObjectiveTo construct a quantitative prediction model of three indicators（moisture absorption rate， film thickness and coating weight gain） during the coating process of Vitamin C Yinqiao tablets（VCYT） by near-infrared spectroscopy（NIRS）， and to realize the endpoint judgment. MethodReal-time NIRS data of 4 batches of VCYT during the coating process were collected by diffuse reflection method. The coating method employed was the rolling coating method， and the samples were obtained at the spray stage from the coater's sampling port every 10 minutes， and 57 batches of samples（about 1 800 tablets） were collected at various coating times， the tablets were embedded in molten paraffin， cut longitudinally， and observed by stereomicroscope. The film thickness， with a target value of 38 μm， was then measured using Motic Images Advanced 3.2 software. Furthermore， the mositure absorption rate of samples， aiming for a target value of 3%， was determined in accordance with guiding principles for drug hygroscopicity testing in the 2020 edition of Chinese Pharmacopoeia， and 3 samples were randomly selected from each batch（10 tablets per batch）， and the coating weight gain was calculated（target value of 4%）. Partial least squares regression（PLSR） was used to construct a quantitative model of the 3 coating indicators， and the predicted values of the coating indicators were smoothed using the moving average method and used to determine the coating endpoints. ResultThe prediction determination coefficients（R_p²） for moisture absorption rate， film thickness and coating weight gain were 0.933 4， 0.932 6 and 0.965 9， the root mean square errors of prediction（RMSEP） were 0.163 5%， 1.870 9 μm and 0.240 3%， the relative percent deviations（RPD） were 3.711 0， 2.760 7 and 5.415 8， respectively. The results of the external validation set demonstrated that the real-time predicted values obtained by the models exhibited the same trend as the measured values， and the coating endpoint could be accurately predicted（with a prediction error of less than 7.32 min and a relative error of less than 5.63%）. ConclusionThe established NIRS model exhibits excellent predictive performance and can be used for quality control of VCYT during the coating process.