BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.

OBJECTIVE:Based on different algorithms of machine learning,the prediction model of lumbar disc herniation has become a trend and hot spot in the development of precision medicine.However,there is limited evidence on the reporting quality and methodological quality of prediction models of lumbar disc herniation outcomes using machine learning.This article is aimed to explore the performance of machine learning algorithms in predicting the prognosis of lumbar disc herniation by comprehensively analyzing the report quality and risk of bias of previous studies that developed and validated prognosis prediction models based on machine learning through a comprehensive literature search,in order to explore the performance of machine learning algorithms in predicting the prognosis of lumbar disc herniation.METHODS:The databases of CNKI,WanFang,VIP,SinOMED,PubMed,Web of Science,Embase,and The Cochrane Library were searched by computer.Studies on the use of machine learning to develop(and/or validate)prognostic prediction models for lumbar disc herniation were collected from the inception of the database to December 31,2023.Two researchers independently screened the literature,extracted data,and assessed the risk of bias of the included studies.The reporting quality and risk of bias of the included studies were assessed by the Multivariable Transparent Reporting of Predictive Models(TRIPOD)statement and the Predictive Model Risk of Bias Assessment Tool(PROBAST).The results of the evaluation were analyzed using descriptive statistics and visual charts.RESULTS:(1)A total of 23 articles were included,and the TRIPOD compliance of each study ranged from 11％to 87％,with a median compliance of 54％.The quality of reporting of titles,detailed descriptions of treatment measures,blinding of predictors,handling of missing data,details of risk stratification,specific procedures for enrollment,model interpretation,and model performance was mostly poor,with TRIPOD adherence rates ranging from 4％to 35％.(2)Of all included studies,61％had a high risk of bias and 39％had an unclear overall risk of bias.The area under the curve,accuracy,sensitivity and specificity were used to evaluate the performance of the model.The areas under the curve of 20 models were reported,ranging from 0.561 to 0.999.Three models reported the accuracy of the model,ranging from 82.07％to 89.65％.(3)Among all included studies,the statistical analysis domain was most often assessed as having a high risk of bias,mainly due to the small number of valid samples,the selection of predictors based on univariate analysis and the lack of calibration and discrimination assessment of the model in the study.CONCLUSION:These results indicate that machine learning can achieve good predictive ability in the development and validation of prognostic models for lumbar disc herniation.The commonly used algorithms include regression algorithm,support vector machine,decision tree,random forest,artificial neural network,naive Bayes and other algorithms.Reasonable algorithms combined with clinical practice can improve the accuracy of prognosis prediction of lumbar disc herniation.However,the reporting and methodological quality of prognosis prediction models based on machine learning are poor,the prediction performance of different models varies greatly,and the generalization and extrapolation of research models are unclear.There is an urgent need to improve the design,implementation and reporting of such studies.To promote the application of machine learning in the clinical practice of lumbar disc herniation prediction models,it is necessary to comprehensively consider various predictors related to the prognosis of the disease before modeling,and strictly follow the relevant standards of PROBAST tool during modeling.

BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.

In recent years， the incidence of depression among adolescents has increased significantly， becoming a serious global public health problem. There is a close relationship between adolescent depression and lipid metabolism abnormalities. However， the mechanisms underlying this association have not been fully elucidated. This article provides a review of the mechanisms and interventions linking adolescent depression and lipid metabolism abnormalities， aiming to offer new ideas for interventions in adolescent depression. Using computerized searches of the China National Knowledge Infrastructure （CNKI）， Wanfang Data， PubMed， and Web of Science， studies on the mechanisms and interventions related to adolescent depression and lipid metabolism were collected， with the search period extending up to October 10， 2025. Two researchers independently conducted literature screening and extracted basic information from the included studies. A total of 12 original studies were included. The results indicate that adolescent depression is associated with certain lipid metabolites. Neurobiological factors， immune inflammation， oxidative stress， and gut microbiota imbalance play important roles in this association. In addition， lipid metabolites such as omega-3 polyunsaturated fatty acids （ω-3 PUFAs） have a significant ameliorating effect on adolescent depression. ［Funded by Shenzhen Fund for Guangdong Provincial High-level Clinical Key Specialties （number， SZGSP013）； Shenzhen Science and Technology Program （number， 20210617155253001）］

ObjectiveTo investigate the effect of repetitive peripheral magnetic stimulation (rPMS) combined with upper limb intelligent robotic training on muscle tension, motor function and cortical excitability in children with unilateral spastic cerebral palsy (USCP). MethodsFrom March, 2023 to December, 2024, 90 children with USCP admitted to Children's Hospital of Soochow University were selected and randomly divided into control group (n = 30), rPMS group (n = 30) and combined group (n = 30). The control group received conventional occupational therapy. The rPMS group received rPMS intervention followed by conventional occupational therapy. The combined group received rPMS followed by upper limb intelligent robot training, for four weeks. Before and after treatment, muscle tension of biceps brachii was assessed using the modified Ashworth Scale (MAS); upper limb motor function was evaluated using the Fugl-Meyer Assessment-Upper Extremity (FMA-UE) and upper limb intelligent parameters; and cortical excitability was measured using transcranial magnetic stimulation (TMS), including resting motor threshold (RMT) and motor-evoked potential (MEP) amplitude of the affected hemisphere. ResultsAfter treatment, MAS grades improved in all groups (|Z| > 3.523, P < 0.001), and the improvement in the combined group was superior to that in the control group (P < 0.05). Significant intra-group (F > 65.21, P < 0.001), inter-group (F > 17.94, P < 0.001) and interaction effects (F > 5.36, P < 0.01) were observed in FMA-UE scores, upper limb intelligent parameters and TMS parameters. Post Hoc analysis showed that the combined group demonstrated significantly greater improvements in FMA-UE scores, upper limb intelligent parameters, and TMS parameters compared with both the control and rPMS groups (all P < 0.01). Except for FMA-UE scores, the rPMS group showed significantly greater improvements than the control group in upper limb intelligent parameters (mechanical feedback, trajectory, and range of motion) and TMS parameters (RMT and MEP amplitude) (P < 0.05). ConclusionrPMS combined with upper limb intelligent robotic training can reduce upper limb muscle tension, improve motor function, and enhance cortical excitability in children with USCP.

Background: and Purpose Live cell-based assays (LCBA) are increasingly used for serological antibody detection due to their ability to preserve antigen conformation, offering moderately higher sensitivity than fixed cell-based assays. However, the clinical necessity of prioritizing LCBA for the detection of aquaporin-4 immunoglobulin G (AQP4-IgG) in neuromyelitis optica spectrum disorder (NMOSD) remains unclear, especially when compared to its established role in diagnosing myelin oligodendrocyte glycoprotein antibody-associated disease. Methods: We compared the performance of live cell-based assays using immunofluorescence (LCBA-IF) and fixed cell-based assays using immunofluorescence (FCBA-IF) in detecting AQP4-IgG in 90 cases of NMOSD meeting 2015 International Panel for Neuromyelitis Optica Diagnosis criteria, alongside 40 controls. Additionally, we further investigated the relationship between AQP4-IgG titers as measured by LCBA-IF and FCBA-IF and clinical parameters in NMOSD patients. Results: Results showed 96.9% agreement between LCBA-IF and FCBA-IF (Cohen’s κ=0.935), with a strong Spearman correlation (0.977, p<0.001). Both methods demonstrated 100% specificity, with LCBA-IF showing slightly higher sensitivity compared to FCBA-IF. Within LCBAIF-tested groups, statistically significant differences in annualized relapse rates were observed across all pairwise comparisons (low-titer vs. moderate-titer, low-titer vs. high-titer, and moderate-titer vs. high-titer; all p<0.050). However, this association reached statistical significance in some FCBA-IF-tested groups. Conclusions Overall, there is a strong concordance between LCBA-IF and FCBA-IF in detecting AQP4-IgG, where LCBA-IF shows slightly higher sensitivity. Furthermore, there is a potential link between elevated AQP4-IgG titers and an increased risk of relapse, and this correlation may appear more pronounced when using LCBA-IF.

ObjectiveTo investigate the mechanisms by which Bushen Tongluo Jiangzhuo prescription improves renal fibrosis in rats with chronic kidney disease （CKD） through the phosphatidylinositol 3-kinase （PI3K）/protein kinase B （Akt）/mammalian target of rapamycin （mTOR） signaling pathway. MethodsSeventy specific pathogen-free （SPF） Sprague-Dawley （SD） rats were randomly divided into a control group （n=15） and a modeling group （n=55）. Rats in the modeling group were administered a 2.5% adenine suspension at a dose of 200 mg·kg^-1·d^-1 by gavage for 4 weeks to establish a CKD model. Successfully modeled rats were randomly divided into a model group， an irbesartan group （20.25 mg·kg^-1·d^-1）， and Bushen Tongluo Jiangzhuo prescription low-， medium-， and high-dose groups （5.82， 11.64， and 23.28 g·kg^-1·d^-1， respectively）， with 10 rats in each group. Each group was administered an equal volume of physiological saline， the corresponding concentration of irbesartan， or Bushen Tongluo Jiangzhuo prescription by gavage for 12 weeks. Body weight and renal function indices were dynamically monitored. Serum creatinine （SCr）， blood urea nitrogen （BUN）， urine albumin-to-creatinine ratio （ACR）， 24-hour urinary total protein （24 hUTP）， aspartate aminotransferase （AST）， alanine aminotransferase （ALT）， interleukin-1β （IL-1β）， interleukin-6 （IL-6）， and tumor necrosis factor-α （TNF-α） levels were measured using an automatic biochemical analyzer. Renal histopathological changes were observed by hematoxylin-eosin （HE） and Masson staining. Immunohistochemistry （IHC） was used to detect the expression of PI3K， Akt， phosphorylated Akt （p-Akt）， and mTOR in renal tissues. Western blot was performed to assess the protein expression of PI3K， p-Akt， Akt， phosphorylated mTOR （p-mTOR）， and mTOR in renal tissues. Real-time quantitative polymerase chain reaction （Real-time PCR） was used to determine the mRNA expression levels of PI3K， Akt， and mTOR in renal tissues. ResultsCompared with the model group， rats in the irbesartan group and the low-， medium-， and high-dose Bushen Tongluo Jiangzhuo prescription groups showed significantly decreased levels of SCr， BUN， ACR， 24 hUTP， IL-1β， IL-6， and TNF-α （P<0.01）. AST levels were significantly increased （P<0.01）， while no significant difference was observed in ALT levels. Histopathological examination revealed that， compared with the model group， renal tubular epithelial cell edema and necrosis and Bowman's capsule dilation were alleviated， inflammatory cell infiltration was reduced， and interstitial and glomerular fibrosis was markedly improved in all treatment groups， with the most pronounced effect observed in the high-dose Bushen Tongluo Jiangzhuo prescription group. Real-time PCR results showed that mRNA expression levels of PI3K， Akt， and mTOR were significantly downregulated in the high-dose group （P<0.01）. IHC results demonstrated that PI3K and p-Akt expression levels in renal tissues were significantly decreased in the high-dose group （P<0.01）. Western blot analysis further confirmed that the expression levels of PI3K， p-Akt/Akt， and p-mTOR/mTOR were significantly reduced in the high-dose group （P<0.01）. ConclusionBushen Tongluo Jiangzhuo prescription improves renal function indices in CKD rats， reduces collagen deposition in renal tissues， and decreases serum inflammatory factor levels. Its protective effect on renal function may be achieved by activating autophagy through downregulation of the PI3K/Akt/mTOR signaling pathway， thereby alleviating renal fibrosis.

To systematically analyzed the reporting status of core elements in publicly available clinical practice guideline(hereafter referred to as "guideline") protocols published domestically and internationally over the past decade, identified existing problems, and provided evidence to inform the standardized writing and publication of future guideline protocols.

OBJECTIVE To evaluate the anticoagulant efficacy and safety of nafamostat mesylate （NM） in the treatment of uremic patients at high risk of bleeding undergoing continuous veno-venous hemofiltration （CVVH） with different methods （pre- dilution and post-dilution）. METHODS A total of 130 uremic patients at high risk of bleeding who underwent CVVH treatment in the nephrology department of Chongqing University Three Gorges Hospital from July 2023 to September 2024 were selected. They were divided into pre-dilution group and post-dilution group according to the random number table method， with 65 cases in each group. Both groups of patients received CVVH treatment under NM anticoagulation. The pre-dilution group adopted the pre-dilution replacement method， while the post-dilution group adopted the post-dilution replacement method. The coagulation， pressure， and usage duration of the filter and dialysis circuit venous reservoirs were compared between the two groups. The changes in prothrombin time （PT）， prothrombin time-international normalized ratio （PT-INR）， activated partial thromboplastin time （APTT）， and fibrinogen （FIB） in the peripheral venous blood before the heparin pump and after the filter at 1， 4 and 7 h of CVVH treatment， as well as 20 min after the end of treatment， were compared between the two groups. The single-compartment urea clearance rate （spKt/V）， β2-microglobulin （β2-MG） clearance rate and the incidence of adverse reactions were duni2007@foxmail.com compared between the two groups. RESULTS Both the pre-dilution and post-dilution groups had 60 patients who completed the study. The incidence of grade Ⅱ-Ⅲ coagulation of the filter and venous reservoirs， as well as the number of patients with transmembrane and venous pressure alarm intervention in the post- dilution group were significantly higher or more than those in the pre-dilution group （P＜0.05）， while usage time of the filter and the pipeline in the post-dilution group was significantly shorter than that in the pre-dilution group （P＜0.05）. The APTT values before the heparin pump as well as PT and APTT values after the filter at 1 h， 4 h， and 7 h of CVVH treatment in the post-dilution group were significantly higher than those in the pre-dilution group （P＜0.001）. There were no significant differences in PT， PT- INR， APTT and FIB between the two groups of patients 20 min after the end of treatment （P＞0.05）. The spKt/v and β2-MG clearance rates in the post-dilution group were significantly higher than those in the pre-dilution group （P＜0.001）. There was no significant difference in the incidence of adverse reactions between the two groups （P＞0.05）. CONCLUSIONS When NM is used as an anticoagulant in the CVVH treatment of uremic patients at high risk of bleeding， compared with the pre-dilution treatment method， the post-dilution treatment method has a higher incidence of filter and dialysis tubing venous reservoir， a shorter usage time of the filter and pipeline， and a greater impact on extracorporeal coagulation， but has a higher solute clearance rate. Clinically， different dilution methods can be selected according to the different treatment needs of patients.

Objective To analyze the clinical and therapeutic characteristics of Epstein-Barr virus (EBV)-negative posttransplant lymphoproliferative disease (PTLD) with diffuse large B-cell lymphoma (DLBCL) in the context of specific cases and literature. Methods A case of EBV-negative DLBCL (GCB type) after kidney transplantation is reported. The patient was a 45-year-old male who underwent living-related kidney transplantation in 2016 and has been receiving triple immunosuppressive therapy with tacrolimus, mycophenolate mofetil and methylprednisolone since then. In 2024, the patient presented with intermittent fever, night sweats and gastrointestinal symptoms. The diagnosis was confirmed by endoscopic pathology, immunohistochemical staining and positron emission tomography/computed tomography. The R-CDOP regimen (rituximab + cyclophosphamide + liposomal doxorubicin + vincristine + dexamethasone) was used for treatment. Results The patient was diagnosed with EBV-negative DLBCL (GCB type, Ann Arbor stage Ⅳ B). After 4 cycles of R-CDOP chemotherapy, the efficacy assessment was partial remission, and the transplant kidney function remained stable. Conclusions For EBV-negative PTLD after kidney transplantation, it is necessary to break through the "virus-dependent" diagnostic thinking. In clinical practice, the focus should be on protecting the transplant kidney, and individualized treatment plans should be developed for patients.