Functional dyspepsia （FD） is a prioritized disease category where traditional Chinese medicine （TCM） demonstrates distinct therapeutic advantages. The current western medicine treatment for FD is mainly based on proton pump inhibitors and prokinetic agents， with digestive enzymes， probiotics and antidepressants serving as adjuvant medication， yet such therapies still have certain limitations. TCM treatment for FD includes oral administration of Chinese herbal formulas and Chinese patent medicines， as well as external TCM therapies such as acupuncture and moxibustion， acupoint application， hot medicinal compress therapy， rubbing with ointment， medicinal iontophoresis， auricular acupoint therapy and tui na （Chinese medical massage）. The combined treatment of FD with integrated TCM and western medicine can significantly improve clinical effectiveness and reduce adverse reactions. The common mechanisms underlying the therapeutic effects of both TCM and western medicine revolve around the core pathological processes of FD， mainly focusing on restoring gastrointestinal motility， regulating the levels of brain-gut peptides， modulating intestinal microecology， and ameliorating inflammatory status. The differential mechanisms lie in the precise targeting feature of western medicine versus the holistic-regulating and multi-target characteristics of TCM， and the two approaches exert a synergistic effect to enhance efficacy. This paper proposes to leverage the advantages of TCM in holistic regulation and the strengths of western medicine in targeted treatment， so as to provide personalized and comprehensive treatment regimens for FD patients.

ObjectiveThe accuracy of Y-chromosome haplogroup assignment is crucial for tracing paternal lineage in male samples. With the advancement of high-throughput sequencing technologies, high-density Y-SNP genotyping from whole-genome or array-based data has become a standard method for determiningY-chromosome haplogroups. This study systematically evaluated the performance of 4 commonly used high-density SNP genotyping systems—namely, the Global Screening Array (GSA), Chinese Genotyping Array (CGA), Affymetrix array, and the 1240K capture panel—for haplogroup assignment. This work provides a reference for data comparison across different systems. MethodsWe extracted genotype data for the 4 Y-SNP panels from 30× whole-genome sequencing (WGS) data of 1 590 male samples from the 1000 Genomes Project. Additionally, GSA array genotype data from 384 relative pairs (spanning 1st- to 12th-degree relationships) from 109 Chinese Han families were collected. Haplogroup assignment was performed using Y-LineageTracker v1.3.0 software. We assessed the concordance and resolution of haplogroup assignments between the four Y-SNP panels and the WGS data. The consistency and resolution of haplogroup assignments were also evaluated for both the 1000 Genomes Project samples and the 109 family samples collected in this study. Furthermore, the impact of varying numbers of Y-SNPs on haplogroup assignment was examined. ResultsThe GSA and CGA panels demonstrated superior resolution and discrimination of haplogroup subclades compared with the other two panels. The haplogroup assignments from the GSA, CGA, and 1240K panels showed high concordance with WGS data, with consistency rates exceeding 88.70%, whereas the Affymetrix platform exhibited a significantly lower consistency rate of 61.89%. Specifically, the GSA and CGA panels consistently demonstrated superior performance compared with the other two panels in the assignment of haplogroups O-M175 and H-L901, achieving complete concordance (100%) for both haplogroups. In contrast, the Affymetrix panel erroneously assigned all individuals belonging to haplogroup O-M175 to haplogroup K2-M526. Furthermore, its accuracy for haplogroup H-L901 was exceedingly low, at merely 1.41%. This poor performance was characterized by the misassignment of 98.59% of H-L901 samples—specifically, 1.41% to J-M304 and a predominant 97.18% to F-M89. For haplogroup R-M207, all four panels exhibited uniformly high levels of consistency, with concordance values exceeding 94.00%. Notably, for haplogroup E-M96, the 1240K and Affymetrix panels outperformed the GSA and CGA panels in terms of concordance, representing the first instance in which these two panels surpassed the latter. Conversely, for haplogroups J-M304, Q-M242, and I-M170, all 4 panels showed relatively elevated misclassification rates, with the Affymetrix array demonstrating the poorest overall performance. None of the four panels showed any discordant haplogroup assignments among the familial relative pairs analyzed. A positive correlation was observed between the number of Y-SNPs (ranging from 1 000 to 10 000) and classification consistency; however, classification consistency plateaued when the number of Y-SNPs exceeded 10 000. Furthermore, a random sampling analysis conducted on the GSA and CGA panels demonstrated that the haplogroup misclassification rate exhibited negligible fluctuation across the Y-SNP range of 500 to 1 000. Conversely, a marked enhancement in classification consistency was observed as the number of markers increased from 1 000 to 5 000, ultimately reaching a plateau within the interval of 5 000 to 8 000 markers. ConclusionThese findings indicate that the GSA and CGA panels provide high resolution and concordance, delivering reliable Y-haplogroup assignment for forensic investigations.

ObjectiveThe accuracy of Y-chromosome haplogroup assignment is crucial for tracing paternal lineage in male samples. With the advancement of high-throughput sequencing technologies, high-density Y-SNP genotyping from whole-genome or array-based data has become a standard method for determiningY-chromosome haplogroups. This study systematically evaluated the performance of 4 commonly used high-density SNP genotyping systems—namely, the Global Screening Array (GSA), Chinese Genotyping Array (CGA), Affymetrix array, and the 1240K capture panel—for haplogroup assignment. This work provides a reference for data comparison across different systems. MethodsWe extracted genotype data for the 4 Y-SNP panels from 30× whole-genome sequencing (WGS) data of 1 590 male samples from the 1000 Genomes Project. Additionally, GSA array genotype data from 384 relative pairs (spanning 1st- to 12th-degree relationships) from 109 Chinese Han families were collected. Haplogroup assignment was performed using Y-LineageTracker v1.3.0 software. We assessed the concordance and resolution of haplogroup assignments between the four Y-SNP panels and the WGS data. The consistency and resolution of haplogroup assignments were also evaluated for both the 1000 Genomes Project samples and the 109 family samples collected in this study. Furthermore, the impact of varying numbers of Y-SNPs on haplogroup assignment was examined. ResultsThe GSA and CGA panels demonstrated superior resolution and discrimination of haplogroup subclades compared with the other two panels. The haplogroup assignments from the GSA, CGA, and 1240K panels showed high concordance with WGS data, with consistency rates exceeding 88.70%, whereas the Affymetrix platform exhibited a significantly lower consistency rate of 61.89%. Specifically, the GSA and CGA panels consistently demonstrated superior performance compared with the other two panels in the assignment of haplogroups O-M175 and H-L901, achieving complete concordance (100%) for both haplogroups. In contrast, the Affymetrix panel erroneously assigned all individuals belonging to haplogroup O-M175 to haplogroup K2-M526. Furthermore, its accuracy for haplogroup H-L901 was exceedingly low, at merely 1.41%. This poor performance was characterized by the misassignment of 98.59% of H-L901 samples—specifically, 1.41% to J-M304 and a predominant 97.18% to F-M89. For haplogroup R-M207, all four panels exhibited uniformly high levels of consistency, with concordance values exceeding 94.00%. Notably, for haplogroup E-M96, the 1240K and Affymetrix panels outperformed the GSA and CGA panels in terms of concordance, representing the first instance in which these two panels surpassed the latter. Conversely, for haplogroups J-M304, Q-M242, and I-M170, all 4 panels showed relatively elevated misclassification rates, with the Affymetrix array demonstrating the poorest overall performance. None of the four panels showed any discordant haplogroup assignments among the familial relative pairs analyzed. A positive correlation was observed between the number of Y-SNPs (ranging from 1 000 to 10 000) and classification consistency; however, classification consistency plateaued when the number of Y-SNPs exceeded 10 000. Furthermore, a random sampling analysis conducted on the GSA and CGA panels demonstrated that the haplogroup misclassification rate exhibited negligible fluctuation across the Y-SNP range of 500 to 1 000. Conversely, a marked enhancement in classification consistency was observed as the number of markers increased from 1 000 to 5 000, ultimately reaching a plateau within the interval of 5 000 to 8 000 markers. ConclusionThese findings indicate that the GSA and CGA panels provide high resolution and concordance, delivering reliable Y-haplogroup assignment for forensic investigations.

Objective To investigate the epidemiological characteristics and changing trend of typhus in Shaanxi Province from 2005 to 2023 to provide a scientific basis for its prevention and control. Methods Excel 2007, SPSS 25.0, Joinpoint 4.9.1.0, and Geoda 1.6 were used for data collection and statistical analysis. Super Map was used for data visualization to describe the changing characteristics of the disease. Results A total of 394 typhus cases were reported in Shaanxi Province from 2005 to 2023. The average annual incidence of typhus was 0.054/100 000, showing a dynamic fluctuation trend(AAPC=-3.3, t=-0.3, P>0.05). The cases were mainly concentrated in Baoji, Hanzhong and Xi′an, accounting for 78.68%. The incidence peak was from May to October, accounting for 64.21% of annual incidence. The epidemic season was from May to October and December. The incidence of the disease was concentrated in the 40-69 age group, accounting for 58.88%, and the sex was 1.07:1. The main occupation was farmers, accounting for 72.08%. The median time from onset to diagnosis was 7 days. Global spatial autocorrelation analysis showed that there were significant spatial autocorrelations in 11 years from 2005 to 2023(P<0.05). Local spatial autocorrelation analysis detected a total of 43“high-high”clustering areas, mainly concentrated in Baoji City. Conclusions The overall incidence of typhus in Shaanxi Province showed a dynamic fluctuation trend, with notable seasonal and regional aggregation. The incidence of typhus was higher in middle-aged and elderly people in rural areas. Surveillance should be strengthened in typhus endemic areas in summer and autumn, and health education should be conducted for key population to form good health habits and reduce the incidence of typhus.

Objective To establish a standardized quality criterion for the formula of the Liuwei Runfu oil recipe. Methods The qualitative identification of the components, such as Cannabis sativa, Ligusticum chuanxiong, Angelica sinensis, Coix lacryma-jobi, and Glycyrrhiza uralensis, was conducted by thin layer chromatography （TLC）. The concentration of Senkyunolide A, ligustilide, and linoleic acid was determined by high-performance liquid chromatography （HPLC）. Results The TLC identification results demonstrated excellent differentiation and high selectivity, without any disruption from the negative samples. The reference standard for Senkyunolide A exhibited excellent linearity in the range of 25 to 300 µg （r=0.9999）, with an average recovery rate of 102.3% and a relative standard deviation （RSD） of 2.3%. The ligustilide reference standard exhibited strong linearity between the concentrations of 0.6875 and 8.25 µg （r=0.9993）, with an average recovery rate of 100.1% and a relative standard deviation （RSD） of 2.8%. The linoleic acid reference standard demonstrated strong linear correlation within the range of 2.8125 to 33.75 µg （r=0.9990）, with an average spiking recovery rate of 102.7% and a relative standard deviation （RSD） of 1.7%. Conclusion The established method with strong specificity was simple，accurate，reliable，which coulod provide a reference for the quality control of the Liuwei Runfu oil recipe.

Investigator-initiated clinical trials （IIT） are an important part of scientific and technological activities involving human study participants. Among them， high-quality IIT can be used to support the marketing and registration application of drugs， medical devices， and other products when conditions permit. Currently， there is a huge gap between IIT and industry-initiated clinical trials. The use of unlisted products in IIT has problems， such as lack of regulatory support， insufficient research funding support， the need to improve the ability of clinical research management departments， the weakness of professional clinical research teams， and the difficulty of ethics review to match the demands. The challenges could be addressed by improving regulations and conducting pilot trials on a small scale， guaranteeing adequate research funding， strengthening the construction of clinical research management systems， building professional clinical research teams， ensuring the quality of ethical reviews and strict follow-up reviews， shifting from ethical reviews to a system for protecting research participants， and reinforcing training for researchers. Ethics committees should strictly review key points， such as the risk-benefit ratio， informed consent， research funding， compensation for damages， qualifications and equipment of research team members， and management of conflict of interest.

OBJECTIVE: To investigate the effect of autologous osteochondral tissue and periosteum transplantation on tendon-bone healing of rotator cuff in rabbits. METHODS: Twenty-four male New Zealand white rabbits were randomly divided into autologous osteochondral tissue and periosteum transplantation group (experimental group, n=12) and simple suture group (control group, n=12). Both groups were subjected to acute supraspinatus tendon injury and repaired with corresponding techniques. At 4, 8, and 12 weeks after operation, 4 specimens from each group were taken from the right shoulder joint for histological examination (HE staining, Masson staining, and Safranin O-fast green staining), and the left shoulder was subjected to biomechanical tests (maximum tensile load and stiffness). RESULTS: Both groups of animals survived until the completion of the experiment after operation. At 4 weeks after operation, both groups showed less collagen fibers and disorder at the tendon-bone junction. At 8 weeks, both groups showed reduced inflammation at the tendon-bone junction, with more organized and denser collagen fibers and chondrocytes. The experimental group showed better results than the control group. At 12 weeks, the experimental group showed typical tendon-bone transition structure, with increased generation of collagen fibers and chondrocytes, and the larger cartilage staining area. Both groups showed an increase in maximum tensile load and stiffness over time ( P<0.05). The stiffness at 4 weeks and the maximum tensile load at 4, 8, and 12 weeks in the experimental group were superior to control group, and the differences were significant ( P<0.05). There was no significant difference in stiffness at 8, 12 weeks between the two groups ( P>0.05). CONCLUSION Autologous osteochondral tissue and periosteum transplantation can effectively promote the fiber and cartilage regeneration at the tendon-bone junction of rotator cuff and improve the biomechanical effect of shoulder joint in rabbits.
Animals ; Rabbits ; Male ; Wound Healing ; Transplantation, Autologous ; Periosteum/transplantation* ; Rotator Cuff Injuries ; Rotator Cuff/surgery* ; Tendons/surgery* ; Biomechanical Phenomena ; Chondrocytes/transplantation* ; Tendon Injuries/surgery* ; Tensile Strength

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

A previous study showed that the length of the foreskin plays a role in the risk of sexually transmitted infections and chronic prostatitis, which can lead to poor quality of sexual life. Here, the association between foreskin length and sexual dysfunction was evaluated. A total of 5700 participants were recruited from the andrology clinic at The First Affiliated Hospital of University of Science and Technology of China (Hefei, China). Clinical characteristics, including foreskin length, were collected, and sexual function was assessed by the International Index of Erectile Function-5 (IIEF-5) and Premature Ejaculation Diagnostic Tool (PEDT) questionnaires. Men with sexual dysfunction were more likely to have redundant foreskin than men without sexual dysfunction. Among the 2721 erectile dysfunction (ED) patients and 1064 premature ejaculation (PE) patients, 301 (11.1%) ED patients and 135 (12.7%) PE patients had redundant foreskin, respectively. Men in the PE group were more likely to have redundant foreskin than men in the non-PE group ( P = 0.004). Logistic regression analyses revealed that the presence of redundant foreskin was associated with increased odds of moderate/severe ED (adjusted odds ratio [aOR] = 1.31, adjusted P = 0.04), moderate PE (aOR = 1.38, adjusted P = 0.02), and probable PE (aOR = 1.37, adjusted P = 0.03) after adjusting for confounding variables. Our study revealed a positive correlation between the presence of redundant foreskin and the risk of sexual dysfunction, especially in PE patients. Assessment of the length of the foreskin during routine clinical diagnosis may provide information for patients with sexual dysfunction.
Humans ; Male ; Foreskin ; Cross-Sectional Studies ; Adult ; Erectile Dysfunction/epidemiology* ; Premature Ejaculation/epidemiology* ; Middle Aged ; China/epidemiology* ; Surveys and Questionnaires ; Sexual Dysfunction, Physiological/epidemiology* ; Young Adult

OBJECTIVE: To screen the genetic risk factors related to severe hematology adverse effects (AEs) in patients with chronic myeloid leukemia (CML) treated with imatinib (IM), and explore the correlation of single nucleotide polymorphisms (SNPs) in IM drug metabolism and transport pathway gene polymorphism with the risk of severe hematology AEs. METHODS: 172 newly diagnosed Chinese Han patients in CML chronic phase (CML-CP) treated with IM were included and divided into severe hematology AEs group and non-severe hematology AEs group. The demographic characteristics and laboratory test results were compared between the two groups. 11 gene SNP sites in the included subjects were genotyped using SNaPshot multiplex SNPs technique. RESULTS: Compared with non-severe hematology AEs group, the severe hematology AEs group had higher white blood cell (WBC) and EOS% (both P < 0.05), but lower hemoglobin (Hb) and hematocrit (HCT) (both P < 0.01). For rs1045642 of ABCB1 gene, there were significant differences in the distribution of allele frequency and genotype frequency of this loci between severe hematology AEs group and non-severe hematology AEs group (both P < 0.05). Carriers of rs1045642 mutation allele A had an increased risk of severe hematology AEs (OR =2.09, 95% CI : 1.24-3.55, P =0.005). There was a significant difference in the distribution of NR1I2 gene rs3814055 genotype between severe hematology AEs group and non-severe hematology AEs group (P < 0.05). The additive model and recessive model of ABCB1 gene rs1045642 and the recessive model of NR1I2 gene rs3814055 were associated with the increased risk of severe hematology AEs (OR =2.14, 3.28, 5.54, all P < 0.05). CONCLUSION Peripheral blood WBC, EOS%, Hb and HCT in patients with newly diagnosed CML-CP are all related to the risk of severe hematology AEs. ABCB1 gene rs1045642 and NR1I2 gene rs3814055 related to the metabolism and transport pathway of IM are associated with severe hematology AEs after IM treatment in CML-CP patients, and they may be potential molecular markers to predict the risk of severe hematology AEs of CML patients treated by IM.
Humans ; Imatinib Mesylate ; Leukemia, Myelogenous, Chronic, BCR-ABL Positive/genetics* ; Polymorphism, Single Nucleotide ; Genotype ; ATP Binding Cassette Transporter, Subfamily B ; Gene Frequency ; Female ; Male ; Middle Aged ; Adult ; Asian People