Objective To introduce the causes of accidents and the diagnosis and treatment of two patients with radiation-induced skin injury admitted to our hospital in 2023, and to provide a reference for the clinical treatment of subsequent radiation-induced skin injury. Methods The clinical treatment process of two patients with acute skin injury caused by external radiation exposure were summarized and analyzed. Results The exposure history of the two patients was reconstructed, the flaw detection scenario was simulated, the biological dose and hand skin exposure dose were estimated, and the infrared thermal imaging device was used for dynamic monitoring. A comprehensive analysis was conducted based on clinical manifestations and other data. The diagnosis of “Xie” was excessive exposure combined with acute radiation-induced skin injury on both hands (Grade IV for the right hand palm, index finger, and middle finger and Grade II for the left hand little finger). The diagnosis of “Hao” was acute radiation-induced skin injury on both hands (Grade I). The two patients received different clinical treatment measures: “Xie” was treated with both local and systemic therapies, while “Hao” was mainly treated with systemic therapy. Conclusion After systematic and effective treatment, the radiation-induced skin injuries healed in both patients.

Prostate cancer(PCa) is a common malignant tumor among elderly men, with high incidence and mortality rates worldwide, posing a serious threat to human health. Traditional treatments face limitations, highlighting the urgent need for novel therapeutic strategies. Recent studies on the regulatory mechanisms of micro ribonucleic acid(microRNA, miRNA) in tumor development has identified miRNA as new targets for PCa diagnosis and treatment. Traditional Chinese medicine(TCM), with its multi-mechanism, multi-target, and multi-pathway regulatory properties, shows promising potential in miRNA-based PCa therapy. This review summarized recent findings on miRNA' roles in PCa and research progress of TCM intervention and found that a variety of miRNA played important regulatory roles in cell differentiation, proliferation, apoptosis, invasion, metastasis, immune microenvironment, and drug resistance, and their potential as biomarkers for PCa diagnosis, prognosis, and therapy, indicating the potential to be a biomarker for the diagnosis, prognosis evaluation, and treatment of PCa. The review concluded that the active components of TCM(terpenoids, flavonoids, alkaloids, and others) and compounds(Yishen Tonglong Decoction, Shenhu Decoction, Zhoushi Qiling Decoction, Fuzheng Yiliu Decoction, and Qilan Formula) could regulate the expression of their downstream target genes by acting on specific miRNA and affect the above biological behaviors of PCa cells, thus playing a role in the treatment of PCa. This review aims to provide a theoretical basis for miRNA as potential biomarkers and therapeutic targets for PCa and suggest new avenues for further development of targeted therapy strategies against miRNA.
Humans ; MicroRNAs/metabolism* ; Prostatic Neoplasms/metabolism* ; Male ; Drugs, Chinese Herbal/therapeutic use* ; Medicine, Chinese Traditional ; Animals ; Gene Expression Regulation, Neoplastic/drug effects*

Bawei Chenxiang Powder(BCP), first documented in the Tibetan medical work Four Medical Classics, has been widely applied in clinical practices in Tibetan and Mongolian medicines since its development. It has the effect of clearing the heart heat, calming the mind, and inducing resuscitation. On the basis of BCP, multiple types of formulae have been developed, such as Bawei Yiheyi Chenxiang Powder, Bawei Rang Chenxiang Powder, and Bawei Pingchuan Chenxiang Powder, which are widely used for treating cardiovascular and respiratory diseases. Current pharmacological research has revealed the pharmacological effects of BCP and its related formulae against myocardial ischemia, cerebral ischemia, renal ischemia, and anti-hypoxia. BCP and its related formulae introduced more treatment options for related clinical diseases and provided insights for fully comprehending the essence and pharmacological components of the formulae. This paper systematically reviewed the clinical and pharmacological research on BCP and its related formulae, analyzing the formulation principles and potential key flavors and active ingredients. This lays a fundamental scientific basis for the clinical use, quality evaluation, and subsequent development and application of BCP and its related formulae, providing references for studying traditional Chinese medicine formulae in a thorough and systematic manner.
Drugs, Chinese Herbal/chemistry* ; Humans ; Powders/chemistry* ; Animals ; Medicine, Chinese Traditional

Parkinson's disease is a neurodegenerative disease that mostly occurs in middle-aged and elderly people. It is characterized by progressive loss of dopaminergic neurons in the substantia nigra and aggregation of Lewy bodies, resulting in a series of motor symptoms and non-motor symptoms. Depression is the most important manifestation of non-motor symptoms, which seriously affects the quality of life of patients. Clinicians often use antidepressant drugs to improve the depressive symptoms of patients with Parkinson 's disease, but it is still urgent to solve the problems of drug side effects and drug resistance caused by such methods. Repetitive transcranial magnetic stimulation is a safe and non-invasive neuromodulation technique that can change the excitability of the corticospinal tract, induce the release of dopamine and other neurotransmitters, and further improve the depressive symptoms of patients with Parkinson 's disease. Based on this, this paper discusses and summarizes the research progress on the efficacy and potential mechanism of repetitive transcranial magnetic stimulation for improving depression in Parkinson 's disease at home and abroad, in order to provide reference for related clinical application research.
Humans ; Parkinson Disease/psychology* ; Transcranial Magnetic Stimulation/methods* ; Depression/etiology*

Pelvic organ prolapse (POP), whose etiology is influenced by genetic and clinical risk factors, considerably impacts women's quality of life. However, the genetic underpinnings in non-European populations and comprehensive risk models integrating genetic and clinical factors remain underexplored. This study constructed the first polygenic risk score (PRS) for POP in the Chinese population by utilizing 20 disease-associated variants from the largest existing genome-wide association study. We analyzed a discovery cohort of 576 cases and 623 controls and a validation cohort of 264 cases and 200 controls. Results showed that the case group exhibited a significantly higher PRS than the control group. Moreover, the odds ratio of the top 10% risk group was 2.6 times higher than that of the bottom 10%. A high PRS was significantly correlated with POP occurrence in women older than 50 years old and in those with one or no childbirths. As far as we know, the integrated prediction model, which combined PRS and clinical risk factors, demonstrated better predictive accuracy than other existing PRS models. This combined risk assessment model serves as a robust tool for POP risk prediction and stratification, thereby offering insights into individualized preventive measures and treatment strategies in future clinical practice.
Humans ; Female ; Pelvic Organ Prolapse/epidemiology* ; Middle Aged ; Risk Assessment/methods* ; China/epidemiology* ; Multifactorial Inheritance ; Aged ; Risk Factors ; Genome-Wide Association Study ; Genetic Predisposition to Disease ; Case-Control Studies ; Adult ; Polymorphism, Single Nucleotide ; Genetic Risk Score ; East Asian People

In 2022， Hainan provincial government launched the project for the prevention and control of viral hepatitis with the goals of a hepatitis B screening rate of 90%， a diagnostic rate of 90%， and a treatment rate of 80% among people aged 18 years and above by the year 2025， and the main intervention measures include population-based prevention， case screening， antiviral therapy， and health management. As of December 31， 2024， a total of 6.875 million individuals in the general population had been screened for hepatitis B， with a screening rate of 95.6%. A total of 184 710 individuals with positive HBsAg were identified， among whom 156 772 were diagnosed through serological reexamination， resulting in a diagnostic rate of 84.9%. A total of 50 742 patients with chronic hepatitis B were identified， among whom 42 921 had hepatitis B-specific health records established for health management， with a file establishment rate of 84.6%. A total of 31 553 individuals received antiviral therapy， with a treatment rate of 62.2%. A total of 2.503 million individuals at a high risk of hepatitis C were screened， among whom 4 870 tested positive for HCV antibody and 3 858 underwent HCV RNA testing， resulting in a diagnostic rate of 79.2%， and 1 824 individuals with positive HCV RNA were identified， among whom 1 194 received antiviral therapy， with a treatment rate of 65.5%. In addition， 159 301 individuals with negative HBsAg and anti-HBs and an age of 20 — 40 years were inoculated with hepatitis B vaccine free of charge. Through the implementation of the project for the prevention and control of viral hepatitis， a large number of hepatitis patients have been identified， treated， and managed in the province within a short period of time， which significantly accelerates the efforts to eliminate the crisis of viral hepatitis.

Background As a pillar industry in China, the manufacturing sector has a high incidence of non-fatal occupational injuries. The factors influencing non-fatal occupational injuries in this industry are closely related at various levels, including individual, equipment, environment, and management, making the analysis of these influencing factors complex. Objective To identify influencing factors of non-fatal occupational injuries among manufacturing workers, providing a basis for targeted interventions and surveillance. Methods A total of 2243 frontline workers from cable and shipbuilding enterprises were selected as study subjects to investigate the incidence of non-fatal occupational injuries and collect information at four levels: individual, equipment, management, and environment in past 12 months. Data balancing was performed using resampling, and LASSO regression was used to select factors of non-fatal occupational injuries. The influence degree and type of variables were judged based on the magnitude of the estimated coefficients of each variable, where variables with estimated coefficients > 0 are risk factors, and those <0 are protective factors. The area under the receiver operating characteristic (ROC)curve (AUC) was used to test the performance of the model, with an AUC value > 0.7 indicating good model performance. Results Among the 2243 frontline workers, males accounted for 77.7% (1742 out of 2243), with the main age range being 40-49 years old, representing 29.5% (661 out of 2243), 82.7% of the workers (1854 out of 2243) were married, and 55.6% (1248 out of 2243) had a junior middle school education level. The average monthly income for 51.0% (1144 out of 2243) of the workers was between 5000 and 6999 Chinese Yuan. The incidence of non-fatal occupational injuries among the manufacturing workers was 8.4% (189/2243) in the past 12 months. Among the 22 factors associated with the occurrence of non-fatal occupational injuries (P<0.05), 10 were individual-level factors, including gender, smoking, alcohol consumption, colleague relationships, average exercise duration, job burnout, work fatigue, musculoskeletal disorders, cardiovascular diseases, and neurological and sensory organ diseases; 3 were equipment-level factors, including equipment operability, hazardous workpieces, and safety hazards; 5 were environmental-level factors, including low temperatures, special operations, noise, workspace size, and dirty and disorderly environment; and 4 were management-level factors, including daily working hours, weekly working days, overtime, and pre-job technical training. The AUC value of the LASSO regression model was 0.704 and the final model retained a total of 10 variables. Among them, there were 7 risk factors for non-fatal occupational injuries (coefficient > 0), including safety hazards, musculoskeletal disorders, dangerous workpieces, job burnout, dirty and disorderly environment, smoking, and male gender; and 3 protective factors (coefficient < 0), including pre-job technical training, good colleague relationship, and long working days per week. Conclusion Manufacturing enterprises need to focus on the incidence of non-fatal occupational injuries and conduct targeted interventions for non-fatal occupational injuries by controlling potential safety hazards, providing pre-job technical training, reducing dangerous workpieces, rectifying working environment, and reasonably arranging working hours.

Background Diseases severely affect the efficiency of workers. Comorbidity refers to the coexistence of two or more chronic diseases or health problems in the same individual. Previous studies have primarily focused on occupational injuries caused by environmental exposures, while the analysis of the epidemiological characteristics of self-reported diseases and occupational injuries among manufacturing workers has been insufficient. Objective To analyze the distribution of self-reported diseases and occupational injuries among manufacturing workers, the strength of correlation between different diseases, and common disease combinations, and to preliminarily explore the relationship between self-reported diseases and occupational injuries. Methods A cross-sectional survey was conducted to investigate the occupational injuries of 2382 workers in 2 manufacturing enterprises over the past year, and 2355 questionnaires were valid after cleaning. The questionnaire included three parts: basic information, occupational injury occurrence, and disease prevalence. The self-reported diseases diagnosed by physicians included musculoskeletal diseases, cardiovascular diseases, respiratory diseases, mental health problems, neurological and sensory organ diseases, digestive organ diseases, reproductive and urinary organ diseases, skin diseases, tumors, endocrine and metabolic system diseases, blood diseases and birth defects, a total of 11 types. Log-binomial model was used to calculate the prevalence ratio (PR) value of the association between different diseases, and UpSet diagram was used to present the disease combination pattern. Results In total, 40.2% (946/2355) of the study participants reported at least one disease, while 8.6% (203/2355), 5.2% (122/2355), and 5.9% (140/2355) reported having two, three, and four or more diseases, respectively. A higher prevalence was observed for musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases, which accounted for 18.0% (423/2355), 13.8% (324/2355), 9.3% (218/2355), and 9.1% (214/2355), respectively. Workers with musculoskeletal disorders, cardiovascular diseases, or neurological and sensory organ diseases reported significantly higher incidence of occupational injuries compared with workers without the corresponding diseases (P<0.001, P=0.041, and P=0.006, respectively). Musculoskeletal diseases were strongly associated with comorbidities of neurological and sensory organ diseases (PR values were 1.86 and 1.98, respectively), and the other patters were musculoskeletal diseases and digestive organ diseases (PR and OR values were 1.57 and 2.35, respectively), and musculoskeletal diseases and cardiovascular diseases (PR and OR values were 1.46 and 2.22, respectively). The largest binomial comorbidity group involved musculoskeletal diseases and neurological and sensory organ diseases, accounting for 5.4% (25/465) of the comorbid workers. Conclusion Among the self-reported diseases of manufacturing workers, musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases are more common. Musculoskeletal diseases and neurological and sensory organ diseases are the most common in all comorbidities. Musculoskeletal diseases, cardiovascular diseases, and neurological and sensory organ diseases are associated with occupational injuries. In the prevention and control of occupational injuries, joint prevention strategies targeting multiple diseases should be strengthened.

Purpose: This study assessed the performance of the ultrasound-guided attenuation parameter (UGAP) in diagnosing and grading hepatic steatosis in patients with metabolic dysfunctionassociated steatotic liver disease (MASLD). Magnetic resonance imaging proton density fat fraction (MRI-PDFF) served as the reference standard. Methods: Patients with hepatic steatosis were enrolled in this prospective study and underwent UGAP measurements. MRI-PDFF values of ≥5%, ≥15%, and ≥25% were used as references for the diagnosis of steatosis grades ≥S1, ≥S2, and S3, respectively. Spearman correlation coefficients and area under the receiver operating characteristic curves (AUCs) were calculated. Results: Between July 2023 and June 2024, the study included 88 patients (median age, 40 years; interquartile range [IQR], 36 to 46 years), of whom 54.5% (48/88) were men and 45.5% (40/88) were women. Steatosis grades exhibited the following distribution: 22.7% (20/88) had S0, 50.0% (44/88) had S1, 21.6% (19/88) had S2, and 5.7% (5/88) had S3. The success rate for UGAP measurements was 100%. The median UGAP value was 0.74 dB/cm/MHz (IQR, 0.65 to 0.82 dB/ cm/MHz), and UGAP values were positively correlated with MRI-PDFF (r=0.77, P<0.001). The AUCs of UGAP for the diagnoses of ≥S1, ≥S2, and S3 steatosis were 0.91, 0.90, and 0.88, respectively. In the subgroup analysis, 98.4% (60/61) of patients had valid controlled attenuation parameter (CAP) values. UGAP measurements were positively correlated with CAP values (r=0.65, P<0.001). Conclusion Using MRI-PDFF as the reference standard, UGAP demonstrates good diagnostic performance in the detection and grading of hepatic steatosis in patients with MASLD.

Purpose: This study assessed the performance of the ultrasound-guided attenuation parameter (UGAP) in diagnosing and grading hepatic steatosis in patients with metabolic dysfunctionassociated steatotic liver disease (MASLD). Magnetic resonance imaging proton density fat fraction (MRI-PDFF) served as the reference standard. Methods: Patients with hepatic steatosis were enrolled in this prospective study and underwent UGAP measurements. MRI-PDFF values of ≥5%, ≥15%, and ≥25% were used as references for the diagnosis of steatosis grades ≥S1, ≥S2, and S3, respectively. Spearman correlation coefficients and area under the receiver operating characteristic curves (AUCs) were calculated. Results: Between July 2023 and June 2024, the study included 88 patients (median age, 40 years; interquartile range [IQR], 36 to 46 years), of whom 54.5% (48/88) were men and 45.5% (40/88) were women. Steatosis grades exhibited the following distribution: 22.7% (20/88) had S0, 50.0% (44/88) had S1, 21.6% (19/88) had S2, and 5.7% (5/88) had S3. The success rate for UGAP measurements was 100%. The median UGAP value was 0.74 dB/cm/MHz (IQR, 0.65 to 0.82 dB/ cm/MHz), and UGAP values were positively correlated with MRI-PDFF (r=0.77, P<0.001). The AUCs of UGAP for the diagnoses of ≥S1, ≥S2, and S3 steatosis were 0.91, 0.90, and 0.88, respectively. In the subgroup analysis, 98.4% (60/61) of patients had valid controlled attenuation parameter (CAP) values. UGAP measurements were positively correlated with CAP values (r=0.65, P<0.001). Conclusion Using MRI-PDFF as the reference standard, UGAP demonstrates good diagnostic performance in the detection and grading of hepatic steatosis in patients with MASLD.