BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:The quadriceps strength of patients with osteoporosis and sarcopenia is significantly reduced,which can further reduce the function of the knee joint,affect the function of the lower limbs and even lead to a decrease in whole-body coordination.It is speculated that a reasonable quadriceps training program and personalized guidance are beneficial to the recovery of knee joint function in patients with osteoporosis and sarcopenia.OBJECTIVE:To observe the effect of short-term moderate-intensity resistance rehabilitation training on the mass and function of the quadriceps and knee joint function in patients with osteoporosis and sarcopenia.METHODS:Using the integrated physical examination and rehabilitation model,375 patients with osteoporosis and sarcopenia were screened at the Health Management Center of Shanghai Public Health Clinical Center.They underwent 12 weeks of combined/comprehensive exercise rehabilitation based on resistance exercise,including quadriceps resistance isotonic and isometric contraction training twice a week(3-5 sets each time,10-15 minutes per set)and aerobic exercise/balance exercise two or three times a week(30 minutes each time).Assessments and data collection were performed before rehabilitation training,12 weeks after rehabilitation training,and at follow-up 12 weeks after stopping rehabilitation training,mainly including knee joint range of motion and proprioception,quadriceps muscle strength,and cross-sectional area(magnetic resonance imaging results),pain,knee joint function(Hospital for Special Surgery score)and walking function("up-and-go"time and 6 m pace test results)as well as the patient's psychological status assessment.RESULTS AND CONCLUSION:All 375 patients completed 12 weeks of rehabilitation training and 12 weeks of follow-up without any adverse events.(1)Compared with before training,the patients' gait speed and knee range of motion increased significantly after 12 weeks of rehabilitation training(P＜0.01),the time of"stand-to-walk"decreased(P＜0.01),and the proprioception of the knee joint and the strength of the quadriceps femoris were significantly improved(P＜0.01);and at the follow-up visit 12 weeks after stopping training,the above indicators and functions of the patients were well maintained(P＞0.05).(2)Magnetic resonance imaging results showed that the effective cross-sectional area of the quadriceps femoris did not improve significantly after 12 weeks of rehabilitation training(P＞0.05);but the Hospital for Special Surgery score of knee joint function increased significantly(P＜0.01),and the visual analog pain scale score decreased significantly(P＜0.01),suggesting that this may be related to the improvement of quadriceps femoris quality by resistance rehabilitation training.(3)The results of the Hospital Anxiety and Depression Scale score showed that the anxiety and depression scores of the patients continued to decrease,both at 12 weeks of rehabilitation training and at 12 weeks after stopping training(P＜0.01).It is suggested that resistance rehabilitation training of the quadriceps can help patients with osteoporosis and sarcopenia to restore quadriceps muscle strength,increase range of motion,improve proprioception and joint stability,thereby enhancing knee joint function,reducing pain,improving depression and anxiety,and to a certain extent promoting the coordinated recovery of the musculoskeletal system.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:The quadriceps strength of patients with osteoporosis and sarcopenia is significantly reduced,which can further reduce the function of the knee joint,affect the function of the lower limbs and even lead to a decrease in whole-body coordination.It is speculated that a reasonable quadriceps training program and personalized guidance are beneficial to the recovery of knee joint function in patients with osteoporosis and sarcopenia.OBJECTIVE:To observe the effect of short-term moderate-intensity resistance rehabilitation training on the mass and function of the quadriceps and knee joint function in patients with osteoporosis and sarcopenia.METHODS:Using the integrated physical examination and rehabilitation model,375 patients with osteoporosis and sarcopenia were screened at the Health Management Center of Shanghai Public Health Clinical Center.They underwent 12 weeks of combined/comprehensive exercise rehabilitation based on resistance exercise,including quadriceps resistance isotonic and isometric contraction training twice a week(3-5 sets each time,10-15 minutes per set)and aerobic exercise/balance exercise two or three times a week(30 minutes each time).Assessments and data collection were performed before rehabilitation training,12 weeks after rehabilitation training,and at follow-up 12 weeks after stopping rehabilitation training,mainly including knee joint range of motion and proprioception,quadriceps muscle strength,and cross-sectional area(magnetic resonance imaging results),pain,knee joint function(Hospital for Special Surgery score)and walking function("up-and-go"time and 6 m pace test results)as well as the patient's psychological status assessment.RESULTS AND CONCLUSION:All 375 patients completed 12 weeks of rehabilitation training and 12 weeks of follow-up without any adverse events.(1)Compared with before training,the patients' gait speed and knee range of motion increased significantly after 12 weeks of rehabilitation training(P＜0.01),the time of"stand-to-walk"decreased(P＜0.01),and the proprioception of the knee joint and the strength of the quadriceps femoris were significantly improved(P＜0.01);and at the follow-up visit 12 weeks after stopping training,the above indicators and functions of the patients were well maintained(P＞0.05).(2)Magnetic resonance imaging results showed that the effective cross-sectional area of the quadriceps femoris did not improve significantly after 12 weeks of rehabilitation training(P＞0.05);but the Hospital for Special Surgery score of knee joint function increased significantly(P＜0.01),and the visual analog pain scale score decreased significantly(P＜0.01),suggesting that this may be related to the improvement of quadriceps femoris quality by resistance rehabilitation training.(3)The results of the Hospital Anxiety and Depression Scale score showed that the anxiety and depression scores of the patients continued to decrease,both at 12 weeks of rehabilitation training and at 12 weeks after stopping training(P＜0.01).It is suggested that resistance rehabilitation training of the quadriceps can help patients with osteoporosis and sarcopenia to restore quadriceps muscle strength,increase range of motion,improve proprioception and joint stability,thereby enhancing knee joint function,reducing pain,improving depression and anxiety,and to a certain extent promoting the coordinated recovery of the musculoskeletal system.

Objective To develop a machine learning-based risk prediction model for postoperative acute kidney injury(AKI)and a model for mortality in obese patients admitted to intensive care unit(ICU)in order to improve early warning and prognostic evaluation to support clinical decision-making.Methods Data of obese postoperative ICU patients were retrospectively retrieved from the MIMIC-Ⅳ and eICU databases for statistical analysis.Ultimately,2 520 patients(670 from MIMIC-Ⅳ and 1 850 from eICU databases)were included to build the risk prediction models for AKI and mortality.The data included demographic information,vital signs,laboratory findings,surgical types,comorbidities,and medication use.After data cleaning and preprocessing,Boruta feature selection was applied,followed by the construction of prediction models using 7 machine learning algorithms,that is,Gradient Boosting Machine(GBM),Generalized Linear Model(GLM),k-Nearest Neighbors(KNN),Na?ve Bayes(NB),Neural Network(NNET),Support Vector Machine(SVM),and XGBoost.Model performance was evaluated through cross-validation and external validation.Results In the risk prediction models of AKI,the SVM model achieved the highest AUC value of 0.80 in the testing set and 0.71 in the external validation test.For the risk prediction models of mortality,the GBM model outperformed others in the prediction,attaining an AUC value of 0.91 in the testing set.Conclusion Risk predictive models for postoperative AKI and mortality in obese ICU patients are successfully constructed,and are valuable tools for clinicians to optimize early intervention and improve clinical outcomes for the patients.

A dielectric barrier discharge ionization source with rapid evaporation and self-aspiration sampling(RE-SADBDI)was developed,integrating a rapid evaporation(RE)module and a dielectric barrier discharge ionization(DBDI)module.The sample was introduced into the RE module via a sampling swab and rapidly vaporized within it.The sealed design of the ionization source could enable the sample to be self-aspirated into the ionization region without the need of additional inert gas.All vaporized sample was efficiently directed into the ionization region due to the relatively enclosed environment for sample transfer and ionization,resulting in improved transfer and ionization efficiencies.Experimental results showed that the limit of detection(LOD)under ion isolation mode reached 0.05 ng/mL(caffeine),with a relative standard deviation(RSD)of 6.9%.Furthermore,when coupled with a miniaturized linear ion trap mass spectrometer,the source enabled real-time analysis of various sample types.The developed RE-SADBDI source was suitable for on-site analysis with miniaturized mass spectrometers.

Accurate identification of endogenous and exogenous substances in food,particularly in competition supplies,is crucial for ensuring food safety and fair competition,as well as for protecting the legitimate rights and professional reputations of athletes.Testosterone(T)and dehydroepiandrosterone(DHEA)are important steroid hormones that can stimulate protein synthesis,increase the number and volume of muscle cells,and promote muscle growth and recovery.Both are often illegally used in the animal husbandry industry to promote animal growth and improve meat quality.However,current research in this area remains limited,and identification technologies require further investigation.This study focused on the techniques for identifying endogenous and exogenous hormones including T and DHEA in beef.A Soxhlet extraction method was established,reducing the pretreatment cycle to 110 min while achieving high extraction efficiency,with recovery rates of 102.5%for T and 91.9%for DHEA,respectively.Based on this,a gas chromatography-combustion-isotope ratio mass spectrometry(GC-C-IRMS)method was developed for analyzing carbon isotopes in T and DHEA,eliminating the need for derivatization.By adding reference materials to the extract,simultaneous measurement of reference materials and target analytes was achieved.The measurement of caffeine reference material,T and DHEA was completed within 40 min,with a measurement repeatability of 0.02‰.Theδ13C values of T and DHEA in standard substances,which may serve as exogenous additives,were determined using elemental analysis-isotope ratio mass spectrometry(EA-IRMS).The results indicated an average δ13C value of-29.44‰±0.81‰(k=1)for 10 T standards and-30.86‰±0.87‰(k=1)for 14 kinds of DHEA standards.This approach effectively distinguished between endogenous sources and exogenous addition of these two hormones in beef,thereby providing vital technical support for the assurance and supervision of food safety.

BACKGROUND:Osteosarcoma has a complex pathogenesis and a poor prognosis.While advancements in medical technology have led to some improvements in the 5-year survival rate,substantial progress in its treatment has not yet been achieved. OBJECTIVE:To screen key molecular markers in osteosarcoma,analyze their relationship with osteosarcoma treatment drugs,and explore the potential disease mechanisms of osteosarcoma at the molecular level. METHODS:GSE99671 and GSE284259(miRNA)datasets were obtained from the Gene Expression Omnibus database.Differential gene expression analysis and Weighted Gene Co-expression Network Analysis(WGCNA)on GSE99671 were performed.Functional enrichment analysis was conducted using Gene Ontology and Kyoto Encyclopedia of Genes and Genomes separately for the differentially expressed genes and the module genes with the highest positive correlation to the disease.The intersection of these module genes and differentially expressed genes was taken as key genes.A Protein-Protein Interaction network was constructed,and correlation analysis on the key genes was performed using CytoScape software,and hub genes were identified.Hub genes were externally validated using the GSE28425 dataset and text validation was conducted.The drug sensitivity of hub genes was analyzed using the CellMiner database,with a threshold of absolute value of correlation coefficient|R|>0.3 and P<0.05. RESULTS AND CONCLUSION:(1)Differential gene expression analysis identified 529 differentially expressed genes,comprising 177 upregulated and 352 downregulated genes.WGCNA analysis yielded a total of 592 genes with the highest correlation to osteosarcoma.(2)Gene Ontology enrichment results indicated that the development of osteosarcoma may be associated with extracellular matrix,bone cell differentiation and development,human immune regulation,and collagen synthesis and degradation.Kyoto Encyclopedia of Genes and Genomes enrichment results showed the involvement of pathways such as PI3K-Akt signaling pathway,focal adhesion signaling pathway,and immune response in the onset of osteosarcoma.(3)The intersection analysis revealed a total of 59 key genes.Through Protein-Protein Interaction network analysis,8 hub genes were selected,which were LUM,PLOD1,PLOD2,MMP14,COL11A1,THBS2,LEPRE1,and TGFB1,all of which were upregulated.(4)External validation revealed significantly downregulated miRNAs that regulate the hub genes,with hsa-miR-144-3p and hsa-miR-150-5p showing the most significant downregulation.Text validation results demonstrated that the expression of hub genes was consistent with previous research.(5)Drug sensitivity analysis indicated a negative correlation between the activity of methotrexate,6-mercaptopurine,and pazopanib with the mRNA expression of PLOD1,PLOD2,and MMP14.Moreover,zoledronic acid and lapatinib showed a positive correlation with the mRNA expression of PLOD1,LUM,MMP14,PLOD2,and TGFB1.This suggests that zoledronic acid and lapatinib may be potential therapeutic drugs for osteosarcoma,but further validation is required through additional basic experiments and clinical studies.

[Objective] To study on the genotyping of a sample with inconsistent forward and reverse serological tests, and to conduct a pedigree investigation and molecular biological mechanism study. [Methods] The ABO blood group of the proband and his family members were identified using blood group serological method. The ABO gene exon 1-7 of samples of the proband and his family were sequenced by Sanger and single molecule real-time sequencing (SMRT). DeepTMHMM was used to predict and analyze the transmembrane region of proteins before and after mutation. [Results] The proband and his mother have the Bw phenotype, while his maternal grandfather has ABw phenotype. The blood group results of forward and reverse typing of other family members were consistent. ABO gene sequencing results showed that there was B new mutation of c.3 G>C in exon 1 of ABO gene in the proband, his mother and grandfather, leading to a shift in translation start site. DeepTMHMM analysis indicated that the shift in the translation start site altered the protein topology. [Conclusion] The c.3G>C mutation in the first exon of the ABO gene leads to a shift in the translation start site, altering the protein topology from an α-transmembrane region to a spherical signaling peptide, reducing enzyme activity and resulting in the Bw serological phenotype.

Haematitum and Limonitum are two iron-containing mineral medicines included in the 2020 edition of the Chinese Pharmacopoeia. They have similar main components and major differences in their property, flavor, channel tropism, and clinical uses. In this study, we investigated the surface properties, mineral composition, mineral dissociation, elemental composition, and iron state of Haematitum and Limonitum to explore their mineralogical differences. Scanning electron microscopy(SEM), specific surface and porosity analyzer, X-ray diffractometer(XRD), X-ray photoelectron spectrometer(XPS), and advanced mineral identification and characterization system(AMICS) were used to analyze the mineralogy of Haematitum and Limonitum. The results showed that Haematitum had an angular surface with granular attachments and a specific surface area of 17.04 m~2·g~(-1). In comparison, Limonitum had a smooth and flat surface with a bundled acicular crystal structure and a specific surface area of 46.29 m~2·g~(-1). Haematitum consists of 31 detectable minerals containing 18 elements, with the major element, iron(44.5% Fe~(2+) and 55.5% Fe~(3+)) distributed in 17 minerals, including hematite, iron oxide, knebelite, siderite, and magnesioferrite. Limonitum consists of 32 detectable minerals containing 17 elements, with the major element, iron(14.5% Fe~(2+) and 85.5% Fe~(3+)) distributed in 19 minerals, including limonite, iron oxide, chlorite, and knebelite. In summary, the elemental composition of Haematitum and Limonitum does not differ greatly, but there are large differences in the mineral composition and iron state. The large specific surface area and strong adsorption capacity of Limonitum may be one of the mechanisms of its anti-diarrheal action. The Fe_2O_3 and illite contained in Haematitum and Limonitum may be the key substances for their hemostasis effects. The mineralogical differences are expected to provide a reference for explaining the scientific connotation of mineral medicine and laying a material foundation for studying its mechanism of action.
Iron/analysis* ; Minerals/chemistry* ; Drugs, Chinese Herbal/chemistry* ; X-Ray Diffraction ; Microscopy, Electron, Scanning ; Photoelectron Spectroscopy