ObjectiveTo prepare triptolide-Chuanxiong Rhizoma extract ethanol transfersomes（TP-CX@TESs）， conduct its quality evaluation， and investigate its in vitro anti-inflammatory efficacy and the underlying mechanisms. MethodsTP-CX@TESs was prepared via the ultrasonic injection method. With encapsulation efficiency and particle size as evaluation indicators， Box-Behnken design-response surface methodology（BBD-RSM） was employed to optimize the formulation process. The TP-CX@TESs prepared under the optimal process was characterized and evaluated for in vitro transdermal performance. A lipopolysaccharide（LPS）-induced RAW264.7 cell inflammation model was established. After 24 h of drug intervention， the levels of inflammatory factors such as nitric oxide（NO）， interleukin-6（IL-6）， and tumor necrosis factor-α（TNF-α） in the cell supernatant were detected. Western blot was used to determine the protein expression levels of Janus kinase 2（JAK2）， signal transducer and activator of transcription 3（STAT3）， and α7 nicotinic acetylcholine receptor（α7nAChR）， and real-time fluorescence quantitative polymerase chain reaction（Real-time PCR） was applied to measure the mRNA expression levels of JAK2， STAT3， the encoding gene of α7nAChR（CHRNA7）， and nuclear transcription factor-κB（NF-κB）. ResultsResults of BBD-RSM showed that the optimal formulation for preparing TP-CX@TESs was as follows：egg yolk lecithin content of 2.3%， ethanol volume fraction of 30%， and ratio of polysorbate-80 to egg yolk lecithin of 2∶5. Microscopic characterization revealed that TP-CX@TESs exhibited a spherical-like structure with a particle size of （105.60±3.85） nm， a polydispersity index of 0.19±0.03， and a Zeta potential of （-15.89±0.98） mV. The encapsulation efficiencies of triptolide， ferulic acid， and ligustilide were （76.88±4.40）%， （78.84±4.40）%， and （65.88±0.06）%， respectively. Both in vitro release and transdermal penetration of triptolide， ferulic acid， and ligustilide in TP-CX@TESs all followed the first-order kinetic model， showing a certain sustained-release property. Experimental results in RAW264.7 cells indicated that TP-CX@TESs significantly inhibited the release of NO， TNF-α， and IL-6（P<0.01）， remarkably upregulated the protein expression levels of STAT3 and α7nAChR（P<0.01）， increased the mRNA expression level of CHRNA7， and significantly downregulated the mRNA expression level of NF-κB（P<0.05， P<0.01）. ConclusionThe optimized formulation process of TP-CX@TESs is simple and feasible， along with favorable in vitro release property， good transdermal permeability， and excellent in vitro anti-inflammatory activity， the mechanism is related to the inhibition of NF-κB.

ObjectiveTo prepare triptolide-Chuanxiong Rhizoma extract ethanol transfersomes（TP-CX@TESs）， conduct its quality evaluation， and investigate its in vitro anti-inflammatory efficacy and the underlying mechanisms. MethodsTP-CX@TESs was prepared via the ultrasonic injection method. With encapsulation efficiency and particle size as evaluation indicators， Box-Behnken design-response surface methodology（BBD-RSM） was employed to optimize the formulation process. The TP-CX@TESs prepared under the optimal process was characterized and evaluated for in vitro transdermal performance. A lipopolysaccharide（LPS）-induced RAW264.7 cell inflammation model was established. After 24 h of drug intervention， the levels of inflammatory factors such as nitric oxide（NO）， interleukin-6（IL-6）， and tumor necrosis factor-α（TNF-α） in the cell supernatant were detected. Western blot was used to determine the protein expression levels of Janus kinase 2（JAK2）， signal transducer and activator of transcription 3（STAT3）， and α7 nicotinic acetylcholine receptor（α7nAChR）， and real-time fluorescence quantitative polymerase chain reaction（Real-time PCR） was applied to measure the mRNA expression levels of JAK2， STAT3， the encoding gene of α7nAChR（CHRNA7）， and nuclear transcription factor-κB（NF-κB）. ResultsResults of BBD-RSM showed that the optimal formulation for preparing TP-CX@TESs was as follows：egg yolk lecithin content of 2.3%， ethanol volume fraction of 30%， and ratio of polysorbate-80 to egg yolk lecithin of 2∶5. Microscopic characterization revealed that TP-CX@TESs exhibited a spherical-like structure with a particle size of （105.60±3.85） nm， a polydispersity index of 0.19±0.03， and a Zeta potential of （-15.89±0.98） mV. The encapsulation efficiencies of triptolide， ferulic acid， and ligustilide were （76.88±4.40）%， （78.84±4.40）%， and （65.88±0.06）%， respectively. Both in vitro release and transdermal penetration of triptolide， ferulic acid， and ligustilide in TP-CX@TESs all followed the first-order kinetic model， showing a certain sustained-release property. Experimental results in RAW264.7 cells indicated that TP-CX@TESs significantly inhibited the release of NO， TNF-α， and IL-6（P<0.01）， remarkably upregulated the protein expression levels of STAT3 and α7nAChR（P<0.01）， increased the mRNA expression level of CHRNA7， and significantly downregulated the mRNA expression level of NF-κB（P<0.05， P<0.01）. ConclusionThe optimized formulation process of TP-CX@TESs is simple and feasible， along with favorable in vitro release property， good transdermal permeability， and excellent in vitro anti-inflammatory activity， the mechanism is related to the inhibition of NF-κB.

BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.

The onset and progression of chronic heart failure （CHF） are closely associated with myocardial energy metabolism disorders， and this pathological process significantly affects patient prognosis. Traditional Chinese medicine （TCM）， grounded in time-based medical theories such as the correspondence between humans and nature and the theory of circadian flow of meridians （Ziwu Liuzhu）， exhibits intrinsic consistency with modern circadian rhythm theory， providing a unique theoretical framework for understanding and intervening in CHF from a temporal perspective. This article systematically explores the impact of circadian rhythms on energy metabolism and the potential mechanisms by which TCM active ingredients intervene in CHF through a review of relevant literature. It is found that various TCM active ingredients， including flavonoids （such as nobiletin）， alkaloids （such as berberine）， and polyphenols （such as resveratrol）， can improve mitochondrial function， promote fatty acid oxidation， enhance glucose uptake and utilization efficiency， maintain metabolic balance， and alleviate oxidative stress and inflammatory responses in myocardial cells by regulating the expression and rhythms of core circadian clock genes such as CLOCK， BMAL1， PER， and CRY. These actions thereby correct energy metabolism disorders and improve cardiac function. Further exploration of the interaction mechanisms between these components and the circadian rhythms holds promise for providing novel theoretical foundations and potential intervention strategies for the prevention and treatment of CHF.

Objective To comprehensively analyze the current epidemic characteristics and disease burden of brucellosis in Tongliao City, and to provide a basis for the prevention and control strategy of brucellosis in Tongliao City. Methods The report data of brucellosis in Tongliao City from 2018 to 2023 were collected. Descriptive methods were used for data analysis, and the disability-adjusted life years and indirect economic losses were calculated. Results From 2018 to 2023, a total of 22 034 cases were reported in Tongliao City, with an average annual incidence of 136.17/100 000. The incidence was statistically different between men and women ( χ²=12.23, P=0.032). The majority of cases were farmers (94.25%), followed by herdsmen (1.67%). The age group was concentrated between 30-60 years old (79.30%), among which the majority of cases were in the 40-50 years group (6 883/22 034). The onset time had seasonal characteristics, and the peak period was from March to August (the seasonal index was between 115.40%-151.29%). In terms of regional distribution, cases were reported in all counties (banners). The average annual incidence was highest in Kulun Banner (233.85/100 000) and Zalut Banner (210.13/100 000), and lowest in Keerqin District (42.28/100 000) and Holingol City (31.87/100 000). The analysis of disease burden showed that a total of 677.55 person-years (YLD) were lost from 2018 to 2023, with an average annual loss of 112.92 person-years. The total indirect economic loss was 59.3576 million yuan, with an average annual loss of 9.892 9 million yuan, and the people over 60 years old had the lowest annual loss. Conclusion The overall brucellosis epidemic in Tongliao City has shown a fluctuating downward trend. The epidemic prevention and control should be strengthened in farmers, people aged 40-50 years old, and areas such as Zalut Banner and Kulun Banner to further control the epidemic of brucellosis.

ObjectiveTo characterize the quality differences among different germplasm and introduced varieties of Bupleurum scorzonerifolium roots（BSR）， and explore the underlying molecular mechanisms， providing a basis for high-quality production and quality control. MethodsWild BSR from Yulin（YLW） served as the quality reference， we conducted comparative analysis among YLW， locally domesticated wild germplasm in Yulin（YLC3）， Daqing germplasm introduced and cultivated in Yulin（YLDQC3）， and locally cultivated germplasm in Daqing（DQC3）. A combination of traditional pharmacognostic methods and modern multi-omics analyses was employed， including macroscopic traits（appearance， odor）， microscopic features（proportions of cork， phloem， xylem）， cell wall component contents（hemicellulose， cellulose， lignin）， carbohydrate contents（starch， water-soluble polysaccharides）， marker compound contents（ethanol-soluble extracts， total saponins， liposoluble extracts， and saikosaponins A， B₂， C， D）， metabolomics， and transcriptomics， in order to systematically characterize quality differences and investigate molecular mechanisms among these samples. ResultsMacroscopically， Yulin-produced BSR（YLW， YLC3， YLDQC3） exhibited significantly greater weight， length， and upper and middle diameters than Daqing-produced BSR（DQC3）. Odor-wise， YLW and YLC3 had a a fragrance taste， YLDQC3 had a rancid oil odor， and DQC3 had a sweet and fragrant taste. Microscopically， Yulin germplasm（YLW， YLC3） and Daqing germplasm（YLDQC3， DQC3） shared similar structural features， respectively. However， Yulin germplasm showed significantly higher proportions of cork and phloem， as well as stronger xylem vessel staining intensity compared to Daqing germplasm. Regarding various component contents， Yulin germplasm contained significantly higher levels of ethanol-soluble extracts， total saponins， and saikosaponins A， B₂， C， D， while Daqing germplasm had significantly higher levels of hemicellulose， starch， and liposoluble extracts. After introduction to Yulin， the Daqing germplasm（YLDQC3） showed increased starch， water-soluble polysaccharides and liposoluble extracts contents， decreased cell wall component content， but no significant difference in other component contents. Metabolomics revealed that saponins and terpenes accumulated significantly in Yulin germplasm， while alcohols and aldehydes accumulated predominantly in Daqing germplasm. Transcriptomics indicated similar gene expression patterns within the same germplasm but specificity between different germplasms. Integrative metabolomic-transcriptomic analysis identified 145 potential key genes associated with the saikosaponin biosynthesis pathway， including one acetyl-coenzyme A（CoA） acetyltransferase gene（ACAT）， one 3-hydroxy-3-methylglutaryl-coenzyme A synthase gene（HMGS）， two hydroxymethylglutaryl-CoA（HMG-CoA） reductase genes（HMG）， one phosphomevalonate kinase gene（PMK）， one 1-deoxy-D-xylose-5-phosphate synthase gene（CLA）， one hydroxymethylbuten-1-aldol synthase gene（HDR）， two farnesyl pyrophosphate synthase genes（FPPS）， one squalene synthase gene（SQS）， one β-amyrin synthase gene（BAS）， 102 cytochrome P450（CYP450） gene family members， and 32 uridine diphosphate-glucuronosyltransferase（UGT） gene family members. ConclusionAmong the three cultivated types， YLC3 most closely resembles YLW in appearance， microscopic features， contents of major bioactive constituents， metabolomic and transcriptomic profiles. Yulin germplasm exhibits superior saponin synthesis capability compared to Daqing germplasm， and Yulin region is more suitable for the growth of B. scorzonerifolium. Based on these findings， it is recommended that artificial cultivation in northern Shaanxi and similar regions utilize the local Yulin germplasm source cultivated for at least three years.

ObjectiveBased on the traditional quality evaluation methods summarized in previous dynasties， this paper systematically contrasted the quality differences between wild Polygalae Radix（WPR） and cultivated Polygalae Radix（CPR） from the aspects of character， microscope and chemical composition by modern scientific and technological means， providing a basis for high-quality production and quality control. MethodsCPR and local WPR in Yulin city， Shaanxi province from 1 to 6 years were collected， and a systematic comparative analysis was conducted using traditional pharmacognosy research methods combined with modern multi-omics analysis techniques， including character traits（length， weight， diameter）， cross-sectional microscopic features（proportions of cork， phloem， xylem， etc）， cell wall component content（hemicellulose， cellulose， lignin）， extracts content（water-soluble extract and alcohol-soluble extract）， carbohydrate content（starch， water-soluble polysaccharides）， contents of total flavonoids， total saponins and specific marker compounds（3，6′-disinapoyl sucrose， polygalaxanthone Ⅲ， tenuifoliside A， tenuifoliside C， sibiricose A₅ and A₆） and other indexes. Ultra-high performance liquid chromatography-quadrupole-time-of-flight mass spectrometry（UPLC-Q-TOF-MS） was employed to conduct comparative analysis of secondary metabolites in WPR and CPR， and multivariate statistical analysis such as principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） were combined to screen the key differential components of them. ResultsIn terms of appearance， there were significant differences between WPR and CPR. The characteristics of WPR conformed to the "thick wrinkles on the epidermis" recorded in ancient books， featuring a wrinkled surface and grayish-brown appearance. However， CPR had a finer texture and a yellowish white appearance， with weight， length， and diameter increasing with longer cultivation periods. In terms of microscopy， WPR exhibited a thick cork layer with fissures in the phloem， whereas CPR had a thinner cork layer with uniformly arranged cork cells. Younger PR specimens showed numerous phloem fissures in cross-sections， while older specimens display progressively denser arrangements of phloem parenchyma cells. In terms of the contents of various major components， the contents of water-soluble extract， starch and total saponins in WPR were inversely proportional to the root diameter， while the contents of water-soluble extract， water-soluble polysaccharides and total saponins in CPR decreased with the increase of planting years. The content of xanthones in WPR was significantly higher than that of CPR， while the contents of other major components showed no significant change pattern. Among the six indicator components， the average content of sibiricose A₅ in WPR was significantly higher than that of CPR， followed by slightly higher content of tenuifoliside A. In CPR， the relative content of 3，6′-disinapoyl sucrose and tenuifoliside A was the highest. The former showed an increase in volatility with increasing cultivation years， while the latter showed a decrease in volatility. The results of differential compound analysis based on UPLC-Q-TOF-MS showed that there were significant differences in metabolites between WPR and CPR samples. Among them， the seven compounds with the largest differences among WPR samples of different thicknesses were polygalasaponins， and for CPR with different planting years， the main differential compounds were oligosaccharide esters. ConclusionThere are differences between WPR and CPR in character， microscopic structure and chemical composition， and some components are inversely proportional with the increase of diameter and cultivation duration due to the distribution characteristics. However， the longer the cultivation years of PR， the closer it is to the "thick wrinkles on the epidermis" of WPR， which has been respected by generations. It is suggested that this traditional character combined with modern component contents should be used as the index of artificial cultivation and quality control of PR.

Objective: To explore the association between takeout fast foods and sugar sweetened beverage consumption with co-occurrence of anxiety and depressive symptoms among first year junior high school students in Yunnan Province, so as to provide theoretical basis for the prevention of anxiety and depressive symptoms co-occurrence among adolescents. Methods: A random cluster sampling involving 8 500 first year junior high school students in 11 counties in Yunnan Province was conducted by a questionnaire survey from October to December 2022. The Depression Anxiety Stress Scale-21 (DASS-21) was applied to assess anxiety and depressive symptoms in first year junior high school students. Chi-square test was used to compare the anxiety-depression co-occurrence symptoms of first year junior high school students with different demographic characteristics. The association between takeout fast foods and sugar sweetened beverage consumption with co-occurrence of anxiety and depressive symptoms of adolescents was analyzed by binary Logistic regression models. Results: The detection rate of co-occurrence of anxiety and depression symptoms among first year junior high school students in Yunnan Province was 26.92%. After controlling for demographic variables and other confounders, takeout fast foods and sugar sweetened beverage consumption( OR=1.50, 95%CI =1.27-1.77) was associated with anxiety-depression co-occurrence symptoms among first year junior high school students in Yunnan Province ( P <0.01). Stratified analysis showed that both Han ( OR=1.37, 95%CI =1.07-1.77) and ethnic minorities ( OR=1.60, 95%CI =1.29-2.00) exhibited statistically significant associations between takeout fast foods and sugar sweetened beverage consumption with co-occurrence of anxiety and depressive symptoms(both P <0.05). Conclusions Takeout fast foods and sugar sweetened beverage consumption increases the risk of co-occurrence of anxiety and depressive symptoms among first year junior high school students in Yunnan Province. It is recommended to strengthen guidance on the consumption of such products among junior high school students to prevent co-occurrence of anxiety and depressive symptoms.

BACKGROUND:Maxillofacial bone three-dimensional(3D)printing technology has been widely used in clinical diagnosis and treatment,but the data source before performing maxillofacial bone 3D printing mainly comes from the CT scanning data.The lens,thyroid and other parts of the human body are extremely sensitive to X-rays;therefore,it is particularly important to effectively reduce the dose of CT radiation when acquiring the data source.OBJECTIVE:To explore the feasibility of low-dose CT technology in optimizing radiation dose for maxillofacial bone 3D printing.METHODS:The medical records of 65 patients who underwent maxillofacial bone 3D printing in the Department of Stomatology at the General Hospital of Northern Theater Command from March 2021 to December 2023 were retrospectively collected and categorized into a conventional CT-dose 3D printing group(conventional CT-dose,120 kVp,automated tube current modulation,n=32)and a low-CT-dose 3D printing group(low-CT-dose group,80 kVp,automated tube current modulation,n=33).The effective dose of radiation was calculated and compared between the two groups.A Likert scale was used to evaluate the quality of 3D printing in the two groups,and the measurement bias and consistency between evaluators were measured using the Bland-Altman method.RESULTS AND CONCLUSION:(1)There was no significant difference in the general demographic characteristics(age,height,weight,body mass,sex,and body mass index)between the two groups(all P＞0.05).(2)The effective dose value of the low CT-dose 3D printing group was(0.3±0.1)mSv,which was about 62.5％lower than that in the conventional CT-dose 3D printing group[(0.8±0.1)mSv].(3)There was no significant difference in the subjective scoring of 3D printing quality between the two groups(all P＞0.05).The subjective consistency among evaluators was good,with Kappa values of 0.85,0.80,and 0.76.The scatter points in the Bland-Altman for both protocols were uniformly distributed within the standard deviation line,indicating good consistency between the two groups.To conclude,low-dose CT technology can be effectively applied in maxillofacial bone 3D printing,reducing radiation dose without affecting the quality of 3D printing.

Objective:To understand the tobacco use situation and related factors among the occupational population in Beijing in 2018.Methods:The data were obtained from a special survey on “Healthy Beijing People—Ten-year Action Plan for Health Promotion (2009—2018)”. From June to September 2018, 12 908 participants were recruited from 16 districts of Beijing using the stratified sampling method combined with the typical sampling method. Questionnaires were conducted to collect basic information, work situations, tobacco exposure in public places, and smoking cessation. The Chi-square test was used to compare the differences in current smoking rates, smoking cessation rates and second-hand smoke exposure rates among participants with different characteristics. Multivariate logistic regression analysis was used to analyze the related factors of tobacco use.Results:The present smoking rate of the occupational population in Beijing was 18.0% (95% CI: 17.3%-18.7%), and the passive smoking exposure rate of non-smokers was 61.0% (95% CI: 60.1%-61.9%). The smoking cessation rate among the working population was 22.2% (95% CI: 20.7%-23.7%), and the proportion of current smokers with the intention to quit was 63.9% (1 485/2 325). The present smoking rate of employees of different genders, ages, education levels and occupational nature showed statistically significant differences ( P<0.05). The results of multivariate logistic regression analysis showed that in males, compared with the age group of 16-29 years old, the risk of smoking increased in the age groups of 30-39 years old, 40-49 years old and over 50 years old [ OR (95% CI) values were 1.49 (1.27-1.74), 1.34 (1.13-1.59) and 1.30 (1.06-1.59)]. Compared with those with junior high school or lower education, participants with high school/vocational/college education group had a higher risk of smoking ( OR=1.38, 95% CI: 1.13-1.69), while those with master′s degree or above had a lower risk of smoking ( OR=0.30, 95% CI: 0.22-0.42). The physical workers ( OR=1.28, 95% CI: 1.11-1.47) had a higher risk of smoking than the mental workers. Conclusion:The current smoking rate among the occupational population in Beijing is lower than the national level during the same period, but the exposure rate to second-hand smoke is relatively high. Age, educational level, job nature and gender are related factors of smoking.