ObjectiveTo investigate the changes in chemical components of Gardeniae Fructus（GF） before and after being charred， providing data support for research on the material basis of GF Carbonisata（GFC）. MethodsUltra-performance liquid chromatography-quadrupole-electrostatic field orbitrap high-resolution mass spectrometry（UPLC-Q-Orbitrap MS/MS） was used to conduct a comprehensive analysis of the chemical components in GF and GFC under positive and negative ion modes with Compound Discoverer 3.3 software and online database. Then， principal component analysis and partial least squares-discriminant analysis in SIMCA14.1 software were used to analyze the MS data of each sample. Based on the principle of variable importance in the projection（VIP） value>1， differential secondary and primary metabolites before and after carbonization were screened. In addition， MetaboAnalyst website was used for pathway enrichment of Kyoto Encyclopedia of Genes and Genomes（KEGG）， so as to provide a reference for clarifying the processing mechanism. ResultsA total of 185 components were identified， including 96 secondary metabolites and 89 primary metabolites. These components were classified into nine categories， primarily including iridoid glycosides， flavonoids， and terpenoids， their fragmentation pathways were also analyzed. Simultaneously， multivariate statistical analysis was performed on the secondary and primary metabolites， identifying 70 and 59 differential metabolites， respectively. The secondary metabolites were enriched in two metabolic pathways， including C5-branched dibasic acid metabolism and flavonoid and flavonol biosynthesis， while the primary differential metabolites were enriched in seven pathways such as linoleic acid metabolism and tyrosine metabolism. ConclusionThe chemical components of GF change significantly after carbonization， with a significant decrease in the contents of iridoid glycosides and terpenoids such as hydroxyisogeniposide， crocin Ⅱ， crocetin， and jasminoside B. while the contents of 4-hydroxycoumarin， geniposidic acid， gentiopicroside， and gardenoside methyl ester increase significantly. This change is presumed to be associated with the enhanced cooling and hemostatic effects of the processed products. The identified key components provide a basis for elucidating the material basis underlying the efficacy changes before and after carbonization.

Collagen is a major structural protein in the matrix of animal cells and the most widely distributed and abundant functional protein in mammals. Collagen’s good biocompatibility, biodegradability and biological activity make it a very valuable biomaterial. According to the source of collagen, it can be broadly categorized into two types: one is animal collagen; the other is recombinant collagen. Animal collagen is mainly extracted and purified from animal connective tissues by chemical methods, such as acid, alkali and enzyme methods, etc. Recombinant collagen refers to collagen produced by gene splicing technology, where the amino acid sequence is first designed and improved according to one’s own needs, and the gene sequence of improved recombinant collagen is highly consistent with that of human beings, and then the designed gene sequence is cloned into the appropriate vector, and then transferred to the appropriate expression vector. The designed gene sequence is cloned into a suitable vector, and then transferred to a suitable expression system for full expression, and finally the target protein is obtained by extraction and purification technology. Recombinant collagen has excellent histocompatibility and water solubility, can be directly absorbed by the human body and participate in the construction of collagen, remodeling of the extracellular matrix, cell growth, wound healing and site filling, etc., which has demonstrated significant effects, and has become the focus of the development of modern biomedical materials. This paper firstly elaborates the structure, type, and tissue distribution of human collagen, as well as the associated genetic diseases of different types of collagen, then introduces the specific process of producing animal source collagen and recombinant collagen, explains the advantages of recombinant collagen production method, and then introduces the various systems of expressing recombinant collagen, as well as their advantages and disadvantages, and finally briefly introduces the application of animal collagen, focusing on the use of animal collagen in the development of biopharmaceutical materials. In terms of application, it focuses on the use of animal disease models exploring the application effects of recombinant collagen in wound hemostasis, wound repair, corneal therapy, female pelvic floor dysfunction (FPFD), vaginal atrophy (VA) and vaginal dryness, thin endometritis (TE), chronic endometritis (CE), bone tissue regeneration in vivo, cardiovascular diseases, breast cancer (BC) and anti-aging. The mechanism of action of recombinant collagen in the treatment of FPFD and CE was introduced, and the clinical application and curative effect of recombinant collagen in skin burn, skin wound, dermatitis, acne and menopausal urogenital syndrome (GSM) were summarized. From the exploratory studies and clinical applications, it is evident that recombinant collagen has demonstrated surprising effects in the treatment of all types of diseases, such as reducing inflammation, promoting cell proliferation, migration and adhesion, increasing collagen deposition, and remodeling the extracellular matrix. At the end of the review, the challenges faced by recombinant collagen are summarized: to develop new recombinant collagen types and dosage forms, to explore the mechanism of action of recombinant collagen, and to provide an outlook for the future development and application of recombinant collagen.

Objective To construct a glioma microfluidic chip model to simulate tumor microenvironment for evaluating the medicinal efficacy of anti-glioma traditional Chinese medicines. Methods Glioblastoma cells U251 were seeded into microfluidic chips with different culture modes, and the cell viability and tumour microenvironment within the constructed model were characterized. Fluorescence staining was used to evaluate the effects of the positive drugs temozolomide （TMZ） and docetaxel （DOC） on the cell activity and apoptosis within the model, which was applied to evaluate the medicinal efficacy of the extracts of the herb Scutellaria barbata on gliomas. Results The cells in the constructed U251 microfluidic chip model displayed high viability and were able to mimic the hypoxic microenvironment of tumor to a certain extent. The viability of the U251 cells in the microfluidic chips decreased with the increasing of the concentration of the positive drug, and the viability of the 3D cultured U251 cells was higher than that in the 2D condition （P<0.05）. The intracellular mitochondrial membrane potential decreased with the increasing of the concentration of the positive drug. And the 2 mg/ml Scutellaria barbata extract killed U251 cells to a certain extent and reduced the mitochondrial membrane potential of the cells in the model. Conclusion This study successfully constructed a microfluidic chip model of glioma that could effectively simulate the tumor microenvironment and rapidly evaluate the anti-tumor medicinal efficacy, which provided a new strategy for the medicinal efficacy evaluation and active components screening of anti-glioma traditional Chinese medicines.

The Pharmacopoeia of the People’s Republic of China 2025 edition is to be issued in March 2025. Chinese Pharmacopoeia is the basic requirements on the drug manufacture, drug testing, drug use and drug administration. The new edition Chinese Pharmacopoeia will be dramatically improved on the pharmacopoeia monographs included, establishing the standards system, standards conversion and application of drug quality control for the new technology, new method & new tool, drug control on the safety and effectiveness as well as the drug standard international harmonization. It will take important role on improving the drug quality, ensuring the safety of drugs for public use, strengthen technical support for drug administration, promoting the high-quality development of China’s medical and pharmaceutical industry. This paper introduces the development and revision of the Chinese Pharmacopoeia 2025 Edition,aim at helping the industries well understanding and implantation the new edition Chinese Pharmacopoeia.

Purpose: This study evaluated the impact of integrating virtual reality (VR) and high-fidelity simulation (HFS) in childbirth nursing education on nursing students’ knowledge, problem-solving ability, nursing performance, and learning satisfaction. Methods: A non-equivalent control group pretest-posttest quasi-experimental design was used. The participants included 41 third-year nursing students, with 21 in the experimental group and 20 in the control group. The experimental group received VR and HFS education, while the control group received HFS alone. The interventions were conducted over 3 weeks, and data collection occurred between May and August 2022. Results: The experimental group showed significant improvements in knowledge, problem-solving ability, and nursing performance compared to the control group. Learning satisfaction was also significantly higher in the experimental group. Conclusion Integrating virtual reality into nursing education can improve learning outcomes and increase satisfaction. Expanding VR-based practical training programs is vital to addressing clinical site shortages and improving educational outcomes.

OBJECTIVE: To explore the early clinical outcomes of 3D printed individualised customised prostheses for in hip revision in patients with combined severe bone defects. METHODS: Twenty-two patients from January 2021 to May 2023 underwent hip revision using 3D printed personalised customised prostheses were retrospective analyzed, including 10 males and 12 females, age 28 to 78 with a mean of (58.9±12.8) years old. All of patients were combined with severe bone defects (Parprosky type Ⅲ). Among of them, 9 patients had periprosthetic infections and 13 patients had aseptic prosthesis loosening. All patients were treated with a 3D printed personalised prosthesis protocol, patients with the periprosthetic infection received a second stage revision after infection control. The operation time, preoperative waiting time, intraoperative and postoperative complications were recorded, and the clinical efficacy were evaluated at the final follow-up using the visual analogue scale (VAS) for pain, the Harris hip score. RESULTS: One patient was lost to follow-up and the remaining 21 patients were followed up for 10 to 15 with a mean of (12.91±1.44) months after surgery. All patients completed surgery as planned, with an operative time of 135 to 390 with a mean of (165.4±39.3) minutes and a preoperative waiting time of 7 to 16 with a mean of (10.5±3.3) days. Regarding patient complications:one patient had a severe intraoperative periprosthetic femoral fracture due to the combination of severe osteoporosis; one patient had an intraoperative greater trochanteric femur fracture. At the latest follow-up, all patients had good position of the custom-made prosthesis and no loosening of the prosthesis;all patients had good wound healing and no local redness or swelling. The total Harris score at the final follow-up (85.86±7.04) was significantly improved compared to the preoperative (44.86±2.36), P<0.001. The VAS at the last follow-up (2.19±0.87) was significantly improved compared with preoperative (7.41±0.96), P<0.001. CONCLUSION The clinical efficacy of 3D-printed personalised customised prosthesis in combined severe bone defect hip revision is satisfactory, but due to the increased preoperative waiting time of the patients and certain risks, certain indications should be mastered when applying in the clinic.
Humans ; Male ; Female ; Printing, Three-Dimensional ; Middle Aged ; Aged ; Adult ; Retrospective Studies ; Hip Prosthesis ; Arthroplasty, Replacement, Hip ; Reoperation ; Prosthesis Design ; Treatment Outcome

OBJECTIVE: Investigation on the clinical application of HURWA robot and Smith & Nephew Cori robot in total knee arthroplasty(TKA). METHODS: A retrospective analysis was performed on 84 patients with knee osteoarthritis who underwent robotic-assisted TKA (RATKA) between June 2023 and March 2025. According to the different robotic systems used, the patients were divided into the domestic HUARUN robotic-assisted total knee arthroplasty group (HRATKA group) and the Smith & Nephew Cori robotic-assisted total knee arthroplasty group (CRATKA group). There were 42 patients in the HRATKA group, including 16 males and 26 females; the age ranged from 56 to 73 years old, with an average of (64.70±8.30) years old;the body mass index (BMI) was (25.10±2.30) kg·m^-2;21 cases were on the right side and 21 cases on the left side;in terms of Kellgren-Lawrence(K-L) classification, there were 15 cases of Grade Ⅲ and 27 cases of Grade Ⅳ;the disease duration ranged from 3 to 25 years, with an average of (15.5±7.5) years. The CRATKA group also included 42 patients, with 14 males and 28 females;the age ranged from 58 to 74 years old, with an average of (65.60±7.50) years old;the BMI was (24.50±2.70) kg·m^-2; 20 cases were on the right side and 22 cases on the left side;regarding K-L classification, there were 11 cases of Grade Ⅲ and 31 cases of Grade Ⅳ;the disease duration ranged from 2 to 26 years, with an average of (16.5±8.8) years. Collect general data of all patients, including age, gender, height, weight, surgical site, K-L classification, incision length, and operation time. To evaluate prosthesis position, compare the frontal tibia component (FTC) angle, lateral femoral component (LFC) angle, lateral tibia component (LTC) angle, and frontal femoral component angle between the two groups of patients after surgery. Measure the deviation of the hip-knee-ankle (HKA) angle to assess lower limb alignment. Additionally, compare the following indicators between the two groups:Knee Society Score (KSS), Visual Analogue Scale (VAS) for pain, knee range of motion (ROM), hemoglobin (HB) level, hematocrit (HCT) level, complication rate, and in-hospital satisfaction. RESULTS: All patients successfully completed the surgery as scheduled, and all were followed up after the operation. The follow-up period ranged from 5 to 17 months with an average of (11.2±6.1) months. There were 4 cases of venous thrombosis in the HRATKA group and 3 cases in the CRATKA group;each group had 2 cases of wound exudation. No mechanical-related complications, pulmonary embolism, or other severe complications occurred. Comparison of the incision length and hospital stay between the HRATKA group and the CRATKA group showed no statistically significant difference (P>0.05). The operation time in the HRATKA group was (96.80±7.10) minutes, which was longer than that in the CRATKA group (90.10±8.80) minutes, and the difference was statistically significant (P<0.05). In the HRATKA group, the HKA angle was (178.93±1.11) degree, the FFC angle was (89.00±0.91)°, and the LFC angle was (7.31±2.17) degree;the corresponding values in the CRATKA group were (178.05±1.34)°, (87.88±1.74)°, and (10.60±2.84) degree respectively. The differences in these three indicators between the two groups were all statistically significant (P<0.05). However, there were no statistically significant differences in the FTC angle or LTC angle between the two groups (P>0.05). There was also no statistically significant difference in the total perioperative blood loss between the two groups (P>0.05). At 3 days after surgery, the VAS score for movement in the HRATKA group (5.95±1.45) points was higher than that in the CRATKA group (4.50±0.97) points, with a statistically significant difference (P<0.05);at 90 days after surgery, there was no statistically significant difference in the movement VAS score between the two groups (P>0.05). Additionally, no statistically significant differences were observed between the two groups in the KSS, ROM at 3 and 90 days after surgery, or satisfaction degree during hospitalization (all P>0.05). CONCLUSION The domestic HURWA robot demonstrates excellent performance in osteotomy efficiency and lower limb alignment recovery. The Smith & Nephew Cori robot has a significant advantage in soft tissue assessment and joint stability optimization. Both robotic systems offer high-quality surgical treatments that significantly improve short-term knee function.
Humans ; Male ; Female ; Arthroplasty, Replacement, Knee/instrumentation* ; Aged ; Middle Aged ; Retrospective Studies ; Robotic Surgical Procedures/methods* ; Osteoarthritis, Knee/surgery*

Surgical methods for varicocele remain controversial. This study intends to evaluate the efficacy and safety of different surgical approaches for treating varicocele through a network meta-analysis (NMA). PubMed, Embase, Cochrane, and Web of Science databases were thoroughly searched. In total, 13 randomized controlled trials (RCTs) and 24 cohort studies were included, covering 9 different surgical methods. Pairwise meta-analysis and NMA were performed by means of random-effects models, and interventions were ranked based on the surface under the cumulative ranking curve (SUCRA). According to the SUCRA, microsurgical subinguinal varicocelectomy (MSV; 91.6%), microsurgical retroperitoneal varicocelectomy (MRV; 78.2%), and microsurgical inguinal varicocelectomy (MIV; 76.7%) demonstrated the highest effectiveness in reducing postoperative recurrence rates. In this study, sclerotherapy embolization (SE; 87.2%), MSV (77.9%), and MIV (67.7%) showed the best results in lowering the risk of hydrocele occurrence. MIV (82.9%), MSV (75.9%), and coil embolization (CE; 58.7%) were notably effective in increasing sperm motility. Moreover, CE (76.7%), subinguinal approach varicocelectomy (SV; 69.2%), and SE (55.7%) were the most effective in increasing sperm count. SE (82.5%), transabdominal laparoscopic varicocelectomy (TLV; 76.5%), and MRV (52.7%) were superior in shortening the length of hospital stay. The incidence rates of adverse events for MRV (0), SE (3.3%), and MIV (4.1%) were notably low. Cluster analyses indicated that MSV was the most effective in the treatment of varicocele. Based on the existing evidence, MSV may represent the optimal choice for varicocele surgery. However, selecting clinical surgical strategies requires consideration of various factors, including patient needs, surgeon experience, and the learning curve.
Humans ; Male ; Embolization, Therapeutic/methods* ; Microsurgery/methods* ; Randomized Controlled Trials as Topic ; Sclerotherapy/methods* ; Treatment Outcome ; Urologic Surgical Procedures, Male/methods* ; Varicocele/surgery*

OBJECTIVE: To explore and evaluate the efficacy and safety of a modified thiotepa-based conditioning regimen combined with autologous hematopoietic stem cell transplantation (ASCT) for the treatment of primary central nervous system lymphoma (PCNSL). METHODS: In a retrospective, single center, single arm study, we collected data of 28 patients with PCNSL who underwent high-dose chemotherapy followed by autologous stem cell transplantation (HDC-ASCT) at our center from March 2021 to December 2024. The clinical characteristics of the patients, the conditioning regimen details, treatment-related toxicities and adverse reactions, post-transplant disease remission status, and survival outcomes were analyzed. RESULTS: A total of 28 patients were included. Among them, 19 patients received ASCT as first-line consolidation therapy in complete response (CR) or partial response (PR) status, and 9 patients with relapsed/refractory disease underwent salvage ASCT. The median time to neutrophil engraftment was 9 days (range: 5-11 days), and the median time to platelet engraftment was 10 days (range: 6-13 days). All patients achieved CR at the initial efficacy evaluation post-ASCT. The main complications during the transplantation period were febrile neutropenia (26 cases) and grade 3 diarrhea (9 cases). No transplantation-related mortality occurred. Post-ASCT, 19 patients received maintenance therapy, which was demonstrated to be safe and effective. Three patients relapse, and one patient died. The median progression-free survival (PFS) and overall survival (OS) of patients were not reached. The estimated 1-year and 2-year cumulative PFS rates were 88.4% and 66.3%, respectively, while the 1-year and 2-year OS rates were both 94.1%. CONCLUSION The modified thiotepa-based conditioning regimen combined with ASCT is safe and effective for the treatment of PCNSL.
Humans ; Thiotepa/therapeutic use* ; Retrospective Studies ; Transplantation, Autologous ; Transplantation Conditioning/methods* ; Central Nervous System Neoplasms/therapy* ; Hematopoietic Stem Cell Transplantation ; Female ; Male ; Middle Aged ; Adult ; Lymphoma/therapy* ; Treatment Outcome ; Aged

OBJECTIVE: To study incident and clinical characteristics of the coronary microcirculation dysfunction (CMD) in patients with acute myocardial infarction (AMI) after percutaneous coronary intervention (PCI) by myocardial contrast echocardiography (MCE) and to explore the predictive value of CMD for in-hospital acute heart failure event. METHODS: One hundred and forty five patients with AMI who had received PCI and completed MCE during hospitalization in Peking University People' s Hospital from November 2015 to July 2021 were enrolled in our study. The patients were divided into CMD group and normal group according to the coronary microcirculation status detected by MCE. Clinical data and MCE data of the two groups were collected and analyzed. The acute heart failure event during hospitalization was described. A multivariate Logistic regression model was built to analyze the risk of acute heart failure in patients with CMD. A receiver operating characteristic (ROC) curve was drawn to evaluate the value of CMD in predicting acute heart failure event. RESULTS: CMD detected by MCE occurred in 87 patients (60%). Compared with normal group, patients with CMD had higher troponin I (TnI) peak level [52.8 (8.1, 84.0) μg/L vs. 18.9 (5.7, 56.1) μg/L, P=0.005], poorer Killip grade on admission (P=0.030), different culprit vessel (P < 0.001) and more patients had thrombolysis in myocardial infarction (TIMI) flow pre-PCI less than grade 3 in culprit vessel (65.1% vs. 43.1%, P=0.025). Meanwhile, patients with CMD had poorer left ventricular ejection fraction (LVEF) [52% (43%, 58%) vs. 61% (54%, 66%)], poorer global longitudinal strain (GLS) [-11.2% (-8.7%, -14.0%) vs.-13.9% (-10.8%, -17.0%)] and worse wall motion score index (WMSI) (1.58±0.36 vs. 1.25± 0.24) (P all < 0.001). Acute left heart failure happened in 13.8% of the CMD patients, which were significant higher than that in the patients with normal coronary microcirculation perfusion (1.7%, P=0.013). After correcting for the culprit vessel, the TIMI flow pre-PCI in the culprit vessel and the peak TnI value, the risk of acute left heart failure in the patients with CMD was still high (OR=9.120, 95%CI: 1.152-72.192, P=0.036). The area under ROC curve (AUC) was 0.677 (95%CI: 0.551-0.804, P=0.035). CONCLUSION The incidence of CMD detected by MCE in patients with AMI post-PCI was 60%. Patients with CMD have a higher risk of acute left heart failure during hospitalization.
Humans ; Heart Failure/physiopathology* ; Microcirculation ; Percutaneous Coronary Intervention/adverse effects* ; Myocardial Infarction/complications* ; Male ; Female ; Hospitalization ; Middle Aged ; Aged ; Echocardiography ; Coronary Circulation ; Predictive Value of Tests ; Troponin I/blood*