ObjectiveTo identify the pathogen species responsible for the wilt disease of Tetradium ruticarpum in Chongqing， investigate there biological characteristics， and screen effective fungicides， so as to provide a theoretical basis for disease control in production. MethodsThe pathogen was isolated via the tissue culture method. Pathogenicity was verified according to Koch's postulates. The pathogen was identified based on morphological characteristics and multi-gene phylogenetic analysis. The mycelial growth rate method was used for biological characterization of the pathogen and fungicide screening. ResultsThe pathogen colonies were nearly circular with irregular edges， white， short， velvety aerial hyphae， and pale purple undersides. Macroconidia were colorless， sickle-shaped， with 3-5 septa， while microconidia were transparent， elliptical， aseptate or with 1-2 septa. Multi-gene phylogenetic analysis showed that the pathogen clustered in the same clade as Fusarium fujikuroi with 100% support， which， combined with morphological characteristics， identified the pathogen causing wilt of T. ruticarpum in Chongqing as F. fujikuroi. The optimal conditions for the mycelial growth of F. fujikuroi were mung bean agar （MBA） with glucose as the carbon source， beef extract and yeast powder as nitrogen sources， 28 ℃， pH 7.0， and alternating light/dark conditions. The optimal conditions for sporulation were potato dextrose agar （PDA） with glucose as the carbon source， beef extract as the nitrogen source， 28 ℃， pH 7.0， and complete darkness. Among chemical fungicides， phenazine-1-carboxylic acid exhibited the strongest inhibitory effect on F. fujikuroi. Shenqinmycin and tetramycin were the most effective bio-fungicides. ConclusionThis study is the first to report F. fujikuroi as the causal agent of wilt disease in T. rutaecarpa. The chemical fungicide phenazine-1-carboxylic acid and the bio-fungicides shenqinmycin and tetramycin showed strong inhibitory effects against F. fujikuroi.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

Objective: To analyze the epidemiological characteristics and influencing factors of severe fever with thrombocytopenia syndrome (SFTS) in Zhejiang Province from 2019 to 2023, so as to provide the reference for strengthening SFTS prevention and control. Methods: Data on laboratory-confirmed SFTS cases in Zhejiang Province from 2019 to 2023 were collected through the Infectious Disease Reporting Information System of Chinese Disease Prevention and Control Information System. Meteorological data, geographic environment and socioeconomic factors during the same period were collected from the fifth-generation European Centre for Medium-Range Weather Forecasts, Geospatial Data Cloud, and Zhejiang Statistical Yearbook, respectively. Descriptive epidemiological methods were used to analyze the epidemiological characteristics of SFTS from 2019 to 2023, and a Bayesian spatio-temporal model was constructed to analyze the influencing factors of SFTS incidence. Results: A total of 578 SFTS cases were reported in Zhejiang Province from 2019 to 2023, with an annual average incidence of 0.23/105. The peak period was from May to July, accounting for 52.60%. There were 309 males and 269 females, with a male-to-female ratio of 1.15∶1. The cases were mainly aged 50-<80 years, farmers, and in rural areas, accounting for 82.53%, 77.34%, and 75.43%, respectively. Taizhou City and Shaoxing City reported more SFTS cases, while Shaoxing City and Zhoushan City had higher annual average incidences of SFTS. The Bayesian spatio-temporal interaction model showed good goodness of fit. The results showed that mean temperature (RR=1.626, 95%CI: 1.111-2.378) and mean wind speed (RR=1.814, 95%CI: 1.321-2.492) were positively correlated with SFTS risk, while altitude (RR=0.432, 95%CI: 0.230-0.829) and population density (RR=0.443, 95%CI: 0.207-0.964) were negatively correlated with SFTS risk. Conclusions SFTS in Zhejiang Province peaks from May to July. Middle-aged and elderly people and farmers are high-risk populations. Taizhou City, Shaoxing City, and Zhoushan City are high-incidence areas. Mean temperature, mean wind speed, altitude, and population density can all affect the risk of SFTS incidence.

ObjectiveThis paper aims to observe the role of Danlou tablet in treating coronary heart disease （CHD） with phlegm-stasis intermingling syndrome in minipigs by improving platelet function and explore the potential pharmacological mechanism of Danlou tablet in regulating platelet function by using proteomics technology. MethodsThirty Bama minipigs were randomly divided into a normal control group （6 pigs） and a high-fat diet group （24 pigs）. After 2 weeks of high-fat diet feeding， the high-fat diet group was randomly subdivided into a model group， an atorvastatin group （1 mg·kg^-1）， and Danlou tablet groups （0.6 g·kg^-1 and 0.3 g·kg^-1）. All groups continued to receive a high-fat diet for 8 weeks after the procedure. The normal control group was given a regular diet， underwent only coronary angiography， and did not receive an interventional injury procedure. The model group and each administration group were fed a high-fat diet. Two weeks later， they underwent a coronary angiography injury procedure. After the procedure， drugs were mixed into the feed every morning for 8 consecutive weeks， with the minipigs maintained on a continuous high-fat diet during this period. Quantitative proteomics technology was further used to study platelet proteins， and differential proteins were obtained by screening. Bioinformatics analysis was performed to analyze key regulatory proteins and biological pathways involved in the therapeutic effect of Danlou tablet on CHD with phlegm-stasis intermingling syndrome. ResultsCompared with the normal control group， the model group showed a significant increase in total cholesterol （TC）， triglyceride （TG）， high-density lipoprotein cholesterol （HDL-C）， and low-density lipoprotein cholesterol （LDL-C） of minipigs' serum （P<0.01）， a significant shortening in prothrombin time of （PT） （P<0.01）， a coagulation function index， and an increase in whole blood viscosity （P<0.01） and platelet aggregation rate （P<0.01）. Moreover， the platelet morphology was altered， and the contents of endothelin-1 （ET-1） and nitric oxide （NO） were significantly increased （P<0.01）. Hemodynamic parameters were obviously abnormal， including significantly decreased systolic blood pressure （SBP）， diastolic blood pressure （DBP）， mean arterial pressure （MAP）， left ventricular systolic pressure （LVSP）， and left ventricular maximal positive dp/dt （LV+dp/dt_max） （P<0.01）. Left ventricular maximal negative dp/dt （LV-dp/dt_max） was significantly increased （P<0.01）. Besides， there were myocardial cell hypertrophy， obvious edematous degeneration， massive interstitial inflammatory cell infiltration， high degree of fibrosis， and coronary endothelial atherosclerosis. TC and TG levels in minipigs' serum were significantly reduced in Danlou tablet groups with 0.6 g·kg^-1 and 0.3 g·kg^-1 （P<0.05， P<0.01）， compared with those in the model group. LDL-C was decreased in the Danlou tablet group with 0.6 g·kg^-1 （P<0.05）. The whole blood viscosity under low and high shear conditions was significantly reduced in the Danlou tablet group with 0.6 g·kg^-1 （P<0.05）. In groups with all doses of Danlou tablet， maximum aggregation rate （MAR） and average aggregation rate （AAR） were significantly decreased （P<0.05， P<0.01）， and platelets' morphological changes such as pseudopodia extension were reduced. ET-1 levels in the serum were significantly reduced. In the Danlou tablet group with 0.6 g·kg^-1， NO level in the serum was reduced （P<0.05）. In groups with all doses of Danlou tablet， DBP and MAP were significantly increased （P<0.05）. In the Danlou tablet group with 0.6 g·kg^-1， LVSP and LV+dp/dt_max were significantly increased （P<0.05， P<0.01）， and LV-dp/dt_max was significantly decreased （P<0.05）. In groups with all doses of Danlou tablet， edematous degeneration in myocardial tissue was milder， and coronary artery lesion degree was significantly alleviated. Compared with the normal control group， there were 94 differentially expressed proteins in the model group， including 81 up-regulated and 13 down-regulated proteins. Compared with the model group， the Danlou tablet group with 0.6 g·kg^-1 showed 174 differentially expressed proteins， including 100 up-regulated and 74 down-regulated proteins. A total of 30 proteins were reversed after Danlou tablet intervention. Bioinformatics analysis revealed that its pharmacological mechanism may exert anti-platelet activation， aggregation， and adhesion effects through biological pathways such as regulation of actin cytoskeleton， platelet activation pathway， Fcγ receptor-mediated phagocytosis， as well as proteins such as growth factor receptor-bound protein 2 （GRB2）， Ras-related C3 botulinum toxin substrate 2 （RAC2）， RAC1， and heat shock protein 90 alpha family class A member 1 （HSP90AA1）. ConclusionDanlou tablet can effectively reduce platelet activation and aggregation， exerting a good therapeutic effect on CHD with phlegm-stasis intermingling syndrome in minipigs. Its pharmacological mechanism may involve regulating biological pathways such as actin cytoskeleton and platelet activation pathway， as well as proteins like GRB2， RAC2， RAC1， and HSP90AA1， thereby exerting a pharmacological effect in anti-platelet activation， aggregation， and adhesion.

ObjectiveTo investigate the effect of lower extremity exoskeleton robots on balance and walking function of patients with post-stroke cerebellar ataxia. MethodsA total of 60 patients with post-stroke cerebellar ataxia in Beijing Bo'ai Hospital from October, 2022 to October, 2024 were selected, and randomly divided into control group (n = 30) and exoskeleton group (n = 30) randomly. Both groups were given conventional exercise training, including trunk control training, rotation axis training and Frenkel training; the exoskeleton group received additional training with lower limb exoskeleton robots, for four weeks. Before and after treatment, the Gait Watch three-dimensional gait analyzer and the Holden Functional Ambulation Classification (HFAC) were used to evaluate the walking spatiotemporal parameters such as walking speed, walking frequency and step length deviation, as well as the walking ability. Berg Balance Scale (BBS) and the International Cooperative Ataxia Rating Scale (ICARS) were used to access the balance and ataxia functions, respectively. ResultsAfter treatment, the walking speed, walking frequency and step length deviation of both groups improved (|t| > 19.676, P < 0.001), the BBS score improved (|t| > 29.032, P < 0.001), and the ICARS scores decreased (t > 33.192, P < 0.001) in both groups, and they were better in the exoskeleton group than in the control group (|t| > 2.284, P < 0.05). There was no significant difference in the improvement rate of HFAC between two groups (P > 0.05). ConclusionLower extremity exoskeleton robots can effectively improve the balance and walking function of patients with post-stroke cerebellar ataxia.

Objective To compare the imaging characteristics and surgical methods of pulmonary nodules in the external 1/3 group and internal 2/3 group. Methods A retrospective analysis of clinical data from patients who underwent thoracoscopic preoperative CT-guided lung nodule localization at the Department of Radiology, the First Affiliated Hospital of Xiamen University from September 2020 to April 2022 was conducted. Results A total of 215 patients were enrolled (247 pulmonary nodules), including 70 males and 145 females, with a median age of 48 years. Based on the location of the nodules under CT guidance, those located in the external 1/3 area of the lung were classified into an external 1/3 group, while those located in the middle 1/3 and inner 1/3 areas were classified into an internal 2/3 group. There was no statistical difference between the two groups in terms of general clinical data, nature of pulmonary nodules, distribution of pulmonary nodules in lobes, localization time, or localization complications (P>0.05). However, there were statistical differences in the distance of pulmonary nodules from the pleura [0.6 (0.0-1.9) cm vs. 1.8 (0.0-4.5) cm, P<0.001], size of pulmonary nodules [0.7 (0.2-1.8) cm vs. 1.0 (0.2-2.0) cm, P<0.001], and surgical methods (P=0.002). In the external 1/3 group, 92.1% of nodules underwent thoracoscopic wedge resection, while fewer patients underwent other procedures; in the internal 2/3 group, 77.1% of nodules underwent thoracoscopic wedge resection, and 19.3% underwent segmentectomy. Conclusion The diameter of pulmonary nodules, the distance of pulmonary nodules from the pleura, and surgical methods differ between the external 1/3 group and internal 2/3 group. Thoracic surgeons can develop more precise surgical plans based on the location and size of pulmonary nodules.

AIM: To evaluate the repeatability and accuracy of iCare IC100 tonometer in measuring intraocular pressure(IOP)by comparing the correlation and difference with Goldmann applanation tonometry(GAT)and non-contact tonometer(NCT), and to compare the correlation of the three types of IOP measurement with the central corneal thickness(CCT).METHODS: Prospective study. A total of 90 outpatients(90 eyes)in Liaoning Aier Eye Hospital from March 2019 to May 2019 were randomly selected as study subjects. All patients were measured IOP using iCare IC100, NCT, and GAT. The interclass correlation coefficient(ICC)was used to evaluate the repeatability of IOP measured 3 times consecutively using an intraocular tonometer. The correlation and consistency of iCare IC100, GAT and NCT were compared by one-way ANOVA, Pearson linear correlation analysis and Bland-Altman analysis. The linear regression analysis was used to analyze the correlation of the three tonometers with CCT.RESULTS: The mean IOP measured with iCare IC100, GAT and NCT was 19.74±6.90, 19.88±7.07 and 18.47±6.31 mmHg, respectively(F=1.180, P=0.309). The measurements of iCare IC100 with GAT, iCare IC100 with NCT and GAT with NCT were all positively correlated(r=0.930, 0.946, 0.918, all P<0.05), the Bland-Altman analysis showed that the mean differences between iCare IC100 and GAT, iCare IC100 and NCT, GAT and NCT were -0.142±2.61, 1.27±2.24, and 1.41±2.81 mmHg, respectively, with 97%(87/90), 96%(86/90), and 97%(87/90)IOP differences distributed within their 95% confidence intervals. The IOP measured with iCare IC100 and CCT, GAT and CCT and NCT and CCT were all positively correlated(r=0.426, 0.353, 0.451, all P<0.01). The linear regression equations between iCare IC100, GAT and NCT measurement and CCT were iCare IC100 IOP=-19.62+0.074×CCT; GAT IOP=-13.54+0.063×CCT; NCT IOP=-19.65+0.072×CCT; that is, for every 10 μm increase in CCT, iCare IC100 measurement increased by 0.74 mmHg, GAT measurement increased by 0.63 mmHg, and NCT measurement increased by 0.72 mmHg.CONCLUSION: The iCare IC100 tonometer has good repeatability and accuracy in measuring IOP, and the CCT has a greater impact on the measurement of iCare IC100 than the GAT and NCT.

AIM: To evaluate the repeatability and accuracy of iCare IC100 tonometer in measuring intraocular pressure(IOP)by comparing the correlation and difference with Goldmann applanation tonometry(GAT)and non-contact tonometer(NCT), and to compare the correlation of the three types of IOP measurement with the central corneal thickness(CCT).METHODS: Prospective study. A total of 90 outpatients(90 eyes)in Liaoning Aier Eye Hospital from March 2019 to May 2019 were randomly selected as study subjects. All patients were measured IOP using iCare IC100, NCT, and GAT. The interclass correlation coefficient(ICC)was used to evaluate the repeatability of IOP measured 3 times consecutively using an intraocular tonometer. The correlation and consistency of iCare IC100, GAT and NCT were compared by one-way ANOVA, Pearson linear correlation analysis and Bland-Altman analysis. The linear regression analysis was used to analyze the correlation of the three tonometers with CCT.RESULTS: The mean IOP measured with iCare IC100, GAT and NCT was 19.74±6.90, 19.88±7.07 and 18.47±6.31 mmHg, respectively(F=1.180, P=0.309). The measurements of iCare IC100 with GAT, iCare IC100 with NCT and GAT with NCT were all positively correlated(r=0.930, 0.946, 0.918, all P<0.05), the Bland-Altman analysis showed that the mean differences between iCare IC100 and GAT, iCare IC100 and NCT, GAT and NCT were -0.142±2.61, 1.27±2.24, and 1.41±2.81 mmHg, respectively, with 97%(87/90), 96%(86/90), and 97%(87/90)IOP differences distributed within their 95% confidence intervals. The IOP measured with iCare IC100 and CCT, GAT and CCT and NCT and CCT were all positively correlated(r=0.426, 0.353, 0.451, all P<0.01). The linear regression equations between iCare IC100, GAT and NCT measurement and CCT were iCare IC100 IOP=-19.62+0.074×CCT; GAT IOP=-13.54+0.063×CCT; NCT IOP=-19.65+0.072×CCT; that is, for every 10 μm increase in CCT, iCare IC100 measurement increased by 0.74 mmHg, GAT measurement increased by 0.63 mmHg, and NCT measurement increased by 0.72 mmHg.CONCLUSION: The iCare IC100 tonometer has good repeatability and accuracy in measuring IOP, and the CCT has a greater impact on the measurement of iCare IC100 than the GAT and NCT.

Immobilized enzyme-based enzyme electrode biosensors, characterized by high sensitivity and efficiency, strong specificity, and compact size, demonstrate broad application prospects in life science research, disease diagnosis and monitoring, etc. Immobilization of enzyme is a critical step in determining the performance (stability, sensitivity, and reproducibility) of the biosensors. Random immobilization (physical adsorption, covalent cross-linking, etc.) can easily bring about problems, such as decreased enzyme activity and relatively unstable immobilization. Whereas, directional immobilization utilizing amino acid residue mutation, affinity peptide fusion, or nucleotide-specific binding to restrict the orientation of the enzymes provides new possibilities to solve the problems caused by random immobilization. In this paper, the principles, advantages and disadvantages and the application progress of enzyme electrode biosensors of different directional immobilization strategies for enzyme molecular sensing elements by specific amino acids (lysine, histidine, cysteine, unnatural amino acid) with functional groups introduced based on site-specific mutation, affinity peptides (gold binding peptides, carbon binding peptides, carbohydrate binding domains) fused through genetic engineering, and specific binding between nucleotides and target enzymes (proteins) were reviewed, and the application fields, advantages and limitations of various immobilized enzyme interface characterization techniques were discussed, hoping to provide theoretical and technical guidance for the creation of high-performance enzyme sensing elements and the manufacture of enzyme electrode sensors.