ObjectiveThis study aimed to establish a monocrotaline （MCT）-induced pulmonary arterial hypertension （PAH） rat model to systematically evaluate the protective effect of Xiao Qinglongtang （XQLT） on right cardiac function in model rats and further elucidate the underlying regulatory mechanism. MethodsSixty male SD rats were randomly assigned to the normal group， model group， XQLT low-， medium-， and high-dose groups （XQLT-L/M/H）， and the beraprost sodium tablet group （BST）. Except for the normal group， rats in all other groups were given a single subcutaneous injection of MCT （60 mg·kg^-1） to induce PAH. Three weeks after injection， rats in the XQLT-L/M/H groups were administered XQLT intragastrically at 3.07， 6.14， 12.28 g·kg^-1·d^-1， respectively. Rats in the BST group received beraprost sodium at 12.6 μg·kg^-1·d^-1， and rats in the model group received an equal volume of saline. All treatments lasted for 3 weeks. Right ventricular systolic pressure （RVSP） was measured by right ventricular catheterization. Cardiac function was assessed by echocardiography. The right ventricle was weighed to calculate the right ventricular hypertrophy index （RVHI）. Hematoxylin-eosin （HE） staining， Masson staining， and transmission electron microscopy were used to observe myocardial morphology. Serum metabolomic changes were analyzed using ultra-performance liquid chromatography-tandem mass spectrometry （UPLC-MS/MS）. Data-independent acquisition （DIA） proteomics was used to detect differentially expressed （DE） proteins in the right ventricle， and Western blot was used to measure the expression of uncoupling protein 3 （UCP3）， phosphatidylinositol 3-kinase catalytic subunit p110α （PIK3CA）， L1 cell adhesion molecule （L1CAM）， and quinone oxidoreductase （CRYZ）. UPLC-MS/MS was used to analyze the chemical components of XQLT. ResultsCompared with the normal group， the model group showed significantly increased RVSP and RVHI （P<0.05）， along with pathological changes in myocardial morphology. Compared with the model group， all XQLT-treated groups exhibited reductions in RVSP and RVHI as well as significant improvements in cardiac function and myocardial morphology. Among the XQLT groups， XQLT-M showed the most pronounced effects （P<0.05）， comparable to the BST group. Serum metabolomics revealed 105 differential metabolites in the XQLT groups versus the model group ［variable importance in projection （VIP） >1， P<0.05］， including 58 upregulated and 47 downregulated metabolites. KEGG enrichment analysis indicated that XQLT intervention downregulated phenylalanine metabolism （P<0.01） and upregulated unsaturated fatty acid biosynthesis （P<0.05）. Proteomics analysis showed that 982 DE proteins were identified in the MCT groups versus the normal group， including 455 upregulated and 527 downregulated proteins （|fold change （FC）| >1.3， P<0.05）. Compared with the model group， 237 DE proteins were identified in the XQLT groups， including 124 upregulated and 113 downregulated proteins （|FC| >1.3， P<0.05）， with 57 overlapping DE proteins. KEGG enrichment suggested that XQLT mainly modulated pathways related to mineral absorption， ribosomal biogenesis， peroxisomes， glycolysis/gluconeogenesis， spliceosomes， and thyroid hormone signaling. Western blot analysis showed that， compared with the model group， XQLT increased the expression of UCP3， PIK3CA， and L1CAM， while decreasing the expression of CRYZ （P<0.05）. ConclusionXQLT exerts a protective effect on right heart function in MCT-induced PAH rats， and its mechanism is associated with maintaining myocardial homeostasis and alleviating right ventricular remodeling.

OBJECTIVE: Humans are exposed to complex mixtures of environmental chemicals and other factors that can affect their health. Analysis of these mixture exposures presents several key challenges for environmental epidemiology and risk assessment, including high dimensionality, correlated exposure, and subtle individual effects. METHODS: We proposed a novel statistical approach, the generalized functional linear model (GFLM), to analyze the health effects of exposure mixtures. GFLM treats the effect of mixture exposures as a smooth function by reordering exposures based on specific mechanisms and capturing internal correlations to provide a meaningful estimation and interpretation. The robustness and efficiency was evaluated under various scenarios through extensive simulation studies. RESULTS: We applied the GFLM to two datasets from the National Health and Nutrition Examination Survey (NHANES). In the first application, we examined the effects of 37 nutrients on BMI (2011-2016 cycles). The GFLM identified a significant mixture effect, with fiber and fat emerging as the nutrients with the greatest negative and positive effects on BMI, respectively. For the second application, we investigated the association between four pre- and perfluoroalkyl substances (PFAS) and gout risk (2007-2018 cycles). Unlike traditional methods, the GFLM indicated no significant association, demonstrating its robustness to multicollinearity. CONCLUSION GFLM framework is a powerful tool for mixture exposure analysis, offering improved handling of correlated exposures and interpretable results. It demonstrates robust performance across various scenarios and real-world applications, advancing our understanding of complex environmental exposures and their health impacts on environmental epidemiology and toxicology.
Humans ; Environmental Exposure/analysis* ; Linear Models ; Nutrition Surveys ; Environmental Pollutants ; Body Mass Index

Background: The function of CD69 expressed on T cells in chronic hepatitis B (CHB) remains unclear. We aimed to elucidate the roles of CD69 on T cells in the disease process and in antiviral therapy for CHB. Methods: We enrolled 335 treatment-naive patients with CHB and 93 patients with CHB on antiviral therapy. CD69, antiviral cytokine production by T cells, T-helper (Th) cells, and inhibitory molecules of T cells were measured using flow cytometry, and clinical-virological characteristics were examined dynamically during antiviral therapy. Results: CD69 expression on CD3+, CD4+, and CD8+ T cells was the lowest in the immune-active phase and was negatively correlated with liver transaminase activity, fibrosis features, inflammatory cytokine production by T cells, and Th-cell frequencies but positively with inhibitory molecules on T cells. CD69 expression on CD3+, CD4+, and CD8+ T cells decreased after 48 weeks of antiviral therapy, and patients with hepatitis B e antigen (HBeAg) seroconversion in week 48 showed lower CD69 expression on T cells at baseline and week 48. The area under the ROC curve of CD69 expression on T cells at baseline for predicting HBeAg seroconversion in week 48 was 0.870, the sensitivity was 0.909, and the specificity was 0.714 (P = 0.002). Conclusions CD69 negatively regulates T-cell immunity during CHB, and its expression decreases with antiviral therapy. CD69 expression predicts HBeAg seroconversion in week 48. CD69 may play an important negative role in regulating T cells and affect the efficacy of antiviral therapy.

Protrusive facial deformities, characterized by the forward displacement of the teeth and/or jaws beyond the normal range, affect a considerable portion of the population. The manifestations and morphological mechanisms of protrusive facial deformities are complex and diverse, requiring orthodontists to possess a high level of theoretical knowledge and practical experience in the relevant orthodontic field. To further optimize the correction of protrusive facial deformities, this consensus proposes that the morphological mechanisms and diagnosis of protrusive facial deformities should be analyzed and judged from multiple dimensions and factors to accurately formulate treatment plans. It emphasizes the use of orthodontic strategies, including jaw growth modification, tooth extraction or non-extraction for anterior teeth retraction, and maxillofacial vertical control. These strategies aim to reduce anterior teeth and lip protrusion, increase chin prominence, harmonize nasolabial and chin-lip relationships, and improve the facial profile of patients with protrusive facial deformities. For severe skeletal protrusive facial deformities, orthodontic-orthognathic combined treatment may be suggested. This consensus summarizes the theoretical knowledge and clinical experience of numerous renowned oral experts nationwide, offering reference strategies for the correction of protrusive facial deformities.
Humans ; Orthodontics, Corrective/methods* ; Consensus ; Malocclusion/therapy* ; Patient Care Planning ; Cephalometry

Enamel demineralization, the formation of white spot lesions, is a common issue in clinical orthodontic treatment. The appearance of white spot lesions not only affects the texture and health of dental hard tissues but also impacts the health and aesthetics of teeth after orthodontic treatment. The prevention, diagnosis, and treatment of white spot lesions that occur throughout the orthodontic treatment process involve multiple dental specialties. This expert consensus will focus on providing guiding opinions on the management and prevention of white spot lesions during orthodontic treatment, advocating for proactive prevention, early detection, timely treatment, scientific follow-up, and multidisciplinary management of white spot lesions throughout the orthodontic process, thereby maintaining the dental health of patients during orthodontic treatment.
Humans ; Consensus ; Dental Caries/etiology* ; Dental Enamel/pathology* ; Tooth Demineralization/etiology* ; Tooth Remineralization

Clear aligner treatment is a novel technique in current orthodontic practice. Distinct from traditional fixed orthodontic appliances, clear aligners have different material features and biomechanical characteristics and treatment efficiencies, presenting new clinical challenges. Therefore, a comprehensive and systematic description of the key clinical aspects of clear aligner treatment is essential to enhance treatment efficacy and facilitate the advancement and wide adoption of this new technique. This expert consensus discusses case selection and grading of treatment difficulty, principle of clear aligner therapy, clinical procedures and potential complications, which are crucial to the clinical success of clear aligner treatment.
Humans ; Consensus ; Orthodontic Appliance Design ; Orthodontic Appliances, Removable ; Tooth Movement Techniques/methods* ; Malocclusion/therapy* ; Orthodontics, Corrective/instrumentation*

Early correction of childhood malocclusion is timely managing morphological, structural, and functional abnormalities at different dentomaxillofacial developmental stages. The selection of appropriate imaging examination and comprehensive radiological diagnosis and analysis play an important role in early correction of childhood malocclusion. This expert consensus is a collaborative effort by multidisciplinary experts in dentistry across the nation based on the current clinical evidence, aiming to provide general guidance on appropriate imaging examination selection, comprehensive and accurate imaging assessment for early orthodontic treatment patients.
Humans ; Malocclusion/diagnostic imaging* ; Child ; Consensus

The prevalence of Class III malocclusion varies among different countries and regions. The populations from Southeast Asian countries (Chinese and Malaysian) showed the highest prevalence rate of 15.8%, which can seriously affect oral function, facial appearance, and mental health. As anterior crossbite tends to worsen with growth, early orthodontic treatment can harness growth potential to normalize maxillofacial development or reduce skeletal malformation severity, thereby reducing the difficulty and shortening the treatment cycle of later-stage treatment. This is beneficial for the physical and mental growth of children. Therefore, early orthodontic treatment for Class III malocclusion is particularly important. Determining the optimal timing for early orthodontic treatment requires a comprehensive assessment of clinical manifestations, dental age, and skeletal age, and can lead to better results with less effort. Currently, standardized treatment guidelines for early orthodontic treatment of Class III malocclusion are lacking. This review provides a comprehensive summary of the etiology, clinical manifestations, classification, and early orthodontic techniques for Class III malocclusion, along with systematic discussions on selecting early treatment plans. The purpose of this expert consensus is to standardize clinical practices and improve the treatment outcomes of Class III malocclusion through early orthodontic treatment.
Humans ; Malocclusion, Angle Class III/classification* ; Orthodontics, Corrective/methods* ; Consensus ; Child

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.