Objective: We aimed to determine whether individuals at immediate risk of suicide could be identified using data from a commercially available wearable device. Methods: Thirty-nine participants experiencing acute depressive episodes and 20 age- and sex-matched healthy controls wore a commercially available wearable device (Galaxy Watch Active2) for two months. We collected data on activities, sleep, and physiological metrics like heart rate and heart rate variability using the wearable device. Participants rated their mood spontaneously twice daily on a Likert scale displayed on the device. Mood ratings by clinicians were performed at weeks 0, 2, 4, and 8. The suicide risk was assessed using the Hamilton Depression Rating Scale’s suicide item score (HAMD-3). We developed two predictive models using machine learning: a single-level model that processed all data simultaneously to identify those at immediate suicide risk (HAMD-3 scores ≥1) and a multilevel model. We compared the predictions of imminent suicide risk from both models. Results: Both the single-step and multi-step models effectively predicted imminent suicide risk. The multi-step model outperformed the single-step model in predicting imminent suicide risk with area under the curve scores of 0.89 compared to 0.88. In the multi-step model, the HAMD total score and heart rate variability were most significant, whereas in the single-step model, the HAMD total score and diagnosis were key predictors. Conclusion Wearable devices are a promising tool for identifying individuals at immediate risk of suicide. Future research with more refined temporal resolution is recommended.

PURPOSE: The aim of this study was to evaluate the clinical performance and survival rate of implant-supported zirconia-lithium disilicate (Zr-LiSi) bilayered ceramic prostheses over 3 years. MATERIALS AND METHODS: This study included 71 patients, including 34 with implant-supported metal-ceramic prostheses (control group) and 37 with implant-supported Zr-LiSi bilayered ceramic prostheses (test group). The implant survival rate and incidence of prosthetic and biological complications (veneer fractures, dislodgement of screw-access hole filling material, screw loosening, peri-implant mucositis and peri-implantitis, and marginal bone loss) were investigated. The survival rate was analyzed using Kaplan-Meier survival curves, and the identity between two groups was confirmed by the log-rank test. RESULTS: Both groups showed a 100% survival rate, whereas the prosthetic survival rates were 77% and 73% for the metal-ceramic and Zr-LiSi groups, respectively. Biological complications did not appear in the metal-ceramic group, and 16.2% of peri-implant mucositis occurred in the Zr-LiSi group, which was significant (P < .05). Prosthetic complications occurred in 5.8% of the metal-ceramic group with veneer fractures and did not occur in the Zr-LiSi bilayered ceramic group. CONCLUSION This study revealed that posterior Zr-LiSi bilayered ceramic implant prostheses showed high survival rates and similar survival rates to metal-ceramic implant prostheses; however, additional consideration should be given to avoid overcontouring. Zr-LiSi bilayered ceramic implant prostheses may be an option for posterior implant-supported prosthetic treatment.

PURPOSE: This study aimed to evaluate the accuracy of static computer-assisted implant surgery (s-CAIS) by comparing the planned and actual positions of implants placed in a partially edentulous model using surgical templates with different sleeve designs. MATERIALS AND METHODS: Forty-nine mandibular partially edentulous models were scanned using a model scanner to create standard tessellation language (STL) files. The models were divided into seven groups based on sleeve design: Group 1–4 (Open non-metal sleeves with varying heights (3 mm, 6 mm) and buccal widths (5 mm, 6 mm)), Group 5–6 (Closed non-metal sleeves with heights of 3 mm and 6 mm), and Group 7 (Closed metal sleeve). After implant placement at #45 and #47, STL files were generated and analyzed using 3D measurement software. Deviations were measured in terms of horizontal deviation (coronal and apical), vertical deviation, and angular deviation. Statistical significance was evaluated using the Wilcoxon rank sum test, Kruskal-Wallis test, and multiple generalized linear models. RESULTS: While height differences showed no significant deviations (P > .05), there was a tendency for larger apical deviation with increased sleeve height (P < .1). Closed metal and closed non-metal sleeves showed smaller deviations compared to open non-metal sleeves, except in vertical deviation. CONCLUSION Closed sleeves demonstrated greater accuracy in s-CAIS compared to open sleeves. Higher sleeves may improve implant placement accuracy, but buccal insertion width did not significantly affect accuracy.

With the increasing emphasis on diversity, equity, and inclusion (DEI) in organizations and institutions, academic societies in gastroenterology and hepatology are beginning to take actionable steps toward achieving DEI. The successful implementation of DEI initiatives leads to excellence in the field, improved patient outcomes, particularly in areas where health disparities are prevalent, and advances in the gastrointestinal discipline. Such implementation also results in a workforce that better reflects the growing diversity of the population. This review defines DEI and introduces the DEI policies and strategies adopted by the academic societies of gastroenterology in other countries. This paper proposes strategies to integrate DEI better into the Korean Society of Gastroenterology, emphasizing the importance of embedding DEI into the culture and strategic framework. The key strategies include establishing a DEI committee, setting clear targets, and conducting formal assessments to measure DEI progress. This study focused on enhancing workforce diversity, particularly among women and young doctors, and advocates for the need to support their academic development through male allyship and the promotion of equitable and inclusive academic cultures.

Background/Aims: Studies on the clinical outcomes after detecting low-grade dysplasia (LGD) in patients with inflammatory bowel disease (IBD) are insufficient. This study evaluated the clinical features, frequency, and risk factors for advanced neoplasia in patients with IBD after an LGD diagnosis. Methods: The medical records of 166 patients with IBD from six university hospitals in Korea from 2010 to 2019 were reviewed retrospectively. LGD was diagnosed in all patients during surveillance. The frequency and risk factors for advanced neoplasia were evaluated, and the clinical features of patients with and without advanced neoplasia were compared. Results: Advanced neoplasia developed in 12 patients (six with large LGD, three with tubulovillous adenoma, and three with high-grade dysplasia), and all cases developed from UC. Patients with advanced neoplasia had significantly higher Mayo scores, and colitis-associated dysplasia was more common than sporadic lesions (83.3% vs. 29.9%; p<0.001). Multivariate analysis showed that colitis-associated LGD significantly increased the risk of developing advanced neoplasia (odds ratio [OR], 10.516; 95% confidence interval [CI], 2.064–53.577). Among patients with colitis-associated lesions, a significant risk factor for advanced neoplasia was a prior history of LGD (OR, 9.429; 95% CI, 1.330–66.863). Conclusions Advanced neoplasia developed in 7.2% of patients with IBD and LGD. Most advanced neoplasms developed from colitis-associated lesions, and the risk was higher in patients with a history of LGD before index colonoscopy.

The leading causes of refractory peptic ulcers are Helicobacter pylori infection and nonsteroidal anti-inflammatory drugs. Additionally, insufficient treatment for the suppression of gastric acid, smoking, alcohol consumption, and concomitant diseases can hinder recovery. Treatment includes the eradication of H. pylori, discontinuation of the causative agent, and appropriate suppression of gastric acid. Even after improvement of symptoms, sufficient proton pump inhibitor maintenance is necessary for 8 to 12 weeks. To increase the success rate of H. pylori eradication, it is essential to accurately determine the initial infection and for patients where treatment has failed due to antibiotic resistance, the success rate of treatment can be increased through sensitivity testing. Sometimes, evaluation for rare causes, such as Zollinger–Ellison syndrome, may be necessary, and follow-up gastroscopy must be performed to exclude the possibility of malignancy.

Background/Aims: Adiponectin, a hormone primarily produced by adipocytes, typically shows an inverse relationship with body mass index (BMI). However, some studies have reported a positive correlation between the two. Thus, this study aimed to examine the relationship between adiponectin level and BMI in diabetic patients, focusing on the impact of past obesity on current adiponectin levels. Methods: We conducted an observational study analyzing data from 323 diabetic patients at Kyungpook National University Hospital. Based on past and current BMIs, participants were categorized into never-obese (nn, n = 106), previously obese (on, n = 43), and persistently obese (oo, n = 73) groups based on a BMI threshold of 25 kg/m2. Adiponectin level and BMI were key variables. Kaplan–Meier analysis assessed their impact on all-cause mortality up to August 2023, with survival differences based on adiponectin quartiles and follow-up starting from patient enrollment (2010–2015). Results: The analysis revealed a significant inverse correlation between adiponectin level and past maximum BMI. The on group exhibited approximately 10% lower adiponectin levels compared to the nn group. This association remained significant after adjusting for current BMI, age, and sex, highlighting the lasting influence of previous obesity on adiponectin levels. Furthermore, survival analysis indicated that patients in the lowest adiponectin quartile had reduced survival, with a statistically significant trend (p = 0.062). Conclusions Findings of this study suggest that lower adiponectin levels, potentially reflecting past obesity, are associated with decreased survival in diabetic patients, underscoring a critical role of adiponectin in long-term health outcomes.

Objective: Extraction of the mandibular second molar (L7) and substitution by the mandibular third molar (L8) is an effective treatment option. This study aimed to evaluate spontaneously erupted L8 occlusion after L7 extraction, and identify the influencing factors. Methods: This study assessed 46 L8 from 28 patients using dental study models, panoramic radiographs, and lateral cephalograms obtained during L7 extraction (T1) and completion of L8 eruption (T2). At T2, samples were categorized as acceptable (A-group) or unacceptable (U-group) based on the American Board of Orthodontics index.L8 angulation and position, retromolar space, distance between the Xi point and mandibular first molar (L6), and Nolla stage were compared between the groups to identify the predictive factors for successful eruption. Results: At T2, 58.7% of L8 exhibited acceptable occlusion. Age at T1 was significantly higher in the U-group than that in the A-group. Angles ∠6-MnP and ∠8-MnP differed significantly between the groups at T2. Xi-L6 distance was considerably longer in the A-group than that in the U-group at T1 and T2. Younger age at extraction and Xi-L6 distance at T1 affected the acceptable occlusion. Conclusions Younger age at L7 extraction and adequate eruption space (Xi-L6 distance) appear to be the key factors for achieving acceptable L8 occlusion.

Objective: This study aimed to investigate the prevalence and characteristics of impacted teeth (ITs) in orthodontic patients at university dental hospitals in Korea. Methods: This study included 14,774 patients who visited the Department of Orthodontics at 10 university dental hospitals in Korea between 2020 and 2022 and underwent orthodontic diagnosis. The prevalence and characteristics of ITs were investigated using orthodontic diagnostic records, radiographs, and diagnostic casts. Results: The prevalence of ITs, excluding third molar impaction, in Korean orthodontic patients was 13.6% (n = 2,014).The prevalence of ITs in pediatric orthodontic patients was 24.5% (n = 1,614).Of these patients, 68.2% had one IT, 27.5% had two ITs, 24.3% had bilateral IT, and 75.7% had unilateral IT. The most frequent IT was the maxillary canine (50.1%), followed by the mandibular second molar (11.7%), and maxillary second premolar (9.6%). An abnormal eruption path (46.5%) was the most frequent etiology. Orthodontic traction after surgical exposure (70.6%) was the most frequent treatment option. Among the patients with ITs, 29.8% had other dental anomalies, such as tooth agenesis (8.7%), microdontia (8.0%), and supernumerary teeth (5.1%). Furthermore, 50.8% had complications such as cystic lesions (18.3%), transposition (17.7%), and root resorption (14.8%).Among the patients with maxillary canine impaction, 62.2% had labial maxillary canine impaction and 21.1% had palatal maxillary canine impaction. Conclusions The prevalence of ITs in Korean orthodontic patients at university dental hospitals was high, particularly in pediatric orthodontic patients.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.