PURPOSE: The purpose of this clinical study was to evaluate the extent of intraoral occlusal adjustment required for zirconia crowns designed with a dynamic jaw motion tracking method compared to a conventional approach. MATERIALS AND METHODS: Fifteen patients needing zirconia crown restorations in the anterior or posterior regions participated in this study. Following tooth preparation, dynamic jaw motion tracking records were gathered using a tracking device. These records were imported into computer-aided design software and aligned with scanned upper and lower jaw data to design each crown's occlusal surface. Two crowns were fabricated for each patient: one using motion tracking data and another without it. Crowns were scanned pre- and post-adjustment following standard protocols. The scanned data were analyzed with 3D inspection software to calculate occlusal adjustments in the segmented occlusal area as root mean square values, with a paired t-test used for statistical analysis (α = 0.05). RESULTS: Crowns designed with motion tracking data required significantly less intraoral occlusal adjustment than those designed conventionally (P = .028). CONCLUSION Dynamic jaw motion tracking in crown design reduces the extent of intraoral occlusal adjustment, potentially enhancing clinical efficiency.

PURPOSE: The purpose of this clinical study was to evaluate the extent of intraoral occlusal adjustment required for zirconia crowns designed with a dynamic jaw motion tracking method compared to a conventional approach. MATERIALS AND METHODS: Fifteen patients needing zirconia crown restorations in the anterior or posterior regions participated in this study. Following tooth preparation, dynamic jaw motion tracking records were gathered using a tracking device. These records were imported into computer-aided design software and aligned with scanned upper and lower jaw data to design each crown's occlusal surface. Two crowns were fabricated for each patient: one using motion tracking data and another without it. Crowns were scanned pre- and post-adjustment following standard protocols. The scanned data were analyzed with 3D inspection software to calculate occlusal adjustments in the segmented occlusal area as root mean square values, with a paired t-test used for statistical analysis (α = 0.05). RESULTS: Crowns designed with motion tracking data required significantly less intraoral occlusal adjustment than those designed conventionally (P = .028). CONCLUSION Dynamic jaw motion tracking in crown design reduces the extent of intraoral occlusal adjustment, potentially enhancing clinical efficiency.

PURPOSE: The purpose of this clinical study was to evaluate the extent of intraoral occlusal adjustment required for zirconia crowns designed with a dynamic jaw motion tracking method compared to a conventional approach. MATERIALS AND METHODS: Fifteen patients needing zirconia crown restorations in the anterior or posterior regions participated in this study. Following tooth preparation, dynamic jaw motion tracking records were gathered using a tracking device. These records were imported into computer-aided design software and aligned with scanned upper and lower jaw data to design each crown's occlusal surface. Two crowns were fabricated for each patient: one using motion tracking data and another without it. Crowns were scanned pre- and post-adjustment following standard protocols. The scanned data were analyzed with 3D inspection software to calculate occlusal adjustments in the segmented occlusal area as root mean square values, with a paired t-test used for statistical analysis (α = 0.05). RESULTS: Crowns designed with motion tracking data required significantly less intraoral occlusal adjustment than those designed conventionally (P = .028). CONCLUSION Dynamic jaw motion tracking in crown design reduces the extent of intraoral occlusal adjustment, potentially enhancing clinical efficiency.

PURPOSE: The purpose of this clinical study was to evaluate the extent of intraoral occlusal adjustment required for zirconia crowns designed with a dynamic jaw motion tracking method compared to a conventional approach. MATERIALS AND METHODS: Fifteen patients needing zirconia crown restorations in the anterior or posterior regions participated in this study. Following tooth preparation, dynamic jaw motion tracking records were gathered using a tracking device. These records were imported into computer-aided design software and aligned with scanned upper and lower jaw data to design each crown's occlusal surface. Two crowns were fabricated for each patient: one using motion tracking data and another without it. Crowns were scanned pre- and post-adjustment following standard protocols. The scanned data were analyzed with 3D inspection software to calculate occlusal adjustments in the segmented occlusal area as root mean square values, with a paired t-test used for statistical analysis (α = 0.05). RESULTS: Crowns designed with motion tracking data required significantly less intraoral occlusal adjustment than those designed conventionally (P = .028). CONCLUSION Dynamic jaw motion tracking in crown design reduces the extent of intraoral occlusal adjustment, potentially enhancing clinical efficiency.

PURPOSE: The purpose of this clinical study was to evaluate the extent of intraoral occlusal adjustment required for zirconia crowns designed with a dynamic jaw motion tracking method compared to a conventional approach. MATERIALS AND METHODS: Fifteen patients needing zirconia crown restorations in the anterior or posterior regions participated in this study. Following tooth preparation, dynamic jaw motion tracking records were gathered using a tracking device. These records were imported into computer-aided design software and aligned with scanned upper and lower jaw data to design each crown's occlusal surface. Two crowns were fabricated for each patient: one using motion tracking data and another without it. Crowns were scanned pre- and post-adjustment following standard protocols. The scanned data were analyzed with 3D inspection software to calculate occlusal adjustments in the segmented occlusal area as root mean square values, with a paired t-test used for statistical analysis (α = 0.05). RESULTS: Crowns designed with motion tracking data required significantly less intraoral occlusal adjustment than those designed conventionally (P = .028). CONCLUSION Dynamic jaw motion tracking in crown design reduces the extent of intraoral occlusal adjustment, potentially enhancing clinical efficiency.

Background: Medullary thyroid carcinoma (MTC) has a poorer prognosis than differentiated thyroid cancers; however, comprehensive data on the long-term outcomes of MTC remain scarce. This study investigated the extended clinical outcomes of MTC and aimed to identify prognostic factors. Methods: Patients diagnosed with MTC between 1980 and 2020 were retrospectively reviewed. Their clinical characteristics, longterm clinical outcomes, and prognostic factors for recurrence and mortality were analyzed. Results: The study included 226 patients (144 women, 82 men). The disease-specific survival (DSS) rates for all MTC patients at 5-, 10-, 20-, and 30-year intervals were 92.7%, 89.4%, 74.3%, and 68.1%, respectively. The recurrence-free survival (RFS) rates were 71.1%, 56.1%, 40.2%, and 32.1% at these intervals. DSS was comparable between the groups from 1980–2009 and 2010–2020 (P=0.995); however, the 1980–2009 group had significantly lower RFS rates (P=0.031). The 2010–2020 group exhibited greater extents of surgical and lymph node dissection (P=0.003) and smaller tumors (P=0.003). Multivariate analysis identified extrathyroidal extension as the strongest prognostic factor for both RFS and DSS. Age >55 years and tumor size of ≥2 cm were also significant prognostic factors for DSS, while hereditary disease and lymph node metastasis were significant for RFS. Survival analysis after propensity-score matching of rearranged during transfection (RET)-negative and non-screened RET-positive groups showed comparable DSS but longer RFS in the RET-negative group. Conclusion Extrathyroidal extension was identified as the strongest prognostic factor for RFS and DSS. Older age and larger tumor size were associated with decreased DSS, while RET mutation and lymph node metastasis significantly impacted RFS.

Through the use of intraoral scanners, it is possible to obtain intraoral scan impressions and produce prostheses. This approach isalso being attempted not only in dentate patients but also in edentulous patients. However, obtaining scans of edentulous areas can be more challenging than scanning dental areas, and there may be limitations, especially in capturing the details of the mucosal tissues. On the other hand, when obtaining impressions with intraoral scanners, simultaneous recording of the occlusal relationship of the maxilla and mandible can reduce the number of patient visits and expedite the restoration process. In this case, we aimed to combine the advantages of direct intraoral scanning and indirect digital impressions obtained after traditional impression-taking by merging two types of scan files. Consequently, in patients with partially edentulous arches, we sought to provide effective in-terim prostheses through direct and indirect digital model impressions and report our findings accordingly.

Purpose: The purpose of this study was to investigate the accuracy of image merging of an intraoral scan of an edentulous arch to a facial scan using wax rim and markers. . Materials and Methods: For registration of oral scan to face scan, a wax rim with markers wasmade. The markers were cuboid and divided into four groups according to size (5, 10 mm) and attachment location (midline, canine region). The evaluation of registration accuracy was compared with a standard created using cone-beam computed tomographydata. Anterior linear variation of the edentulous arch and the 3D variation of the overall arch were measured. Kruskal-Wallis test and Mann-Whitney U test were used for statistics, and the significance level was set at 0.05 and evaluated under Bonferroni correction (0.05/6 = 0.083). Results: In the anterior deviation and global deviation results, there was no statistically significant difference in the oral scan position displacement values between the 5 mm and 10 mm groups. When the midline marker was used, the intraoral scan position displacement value was significantly lower than when only the canine marker was used. Conclusion Marker attached wax rim can be used for image matching between facial and intraoral scans of the edentulous arch. Marker location at the middle area increases the accuracy of image matching.

Purpose: The purpose of this study was to investigate the accuracy of digital mounting with occlusal scans in the interocclusal record for a full-mouth fixed prosthetic treatment condition. Materials and Methods: The entire maxillary teeth were prepared in a dentiform model and attached to an articulator in maximum intercuspation. Temporary crowns were fabricated and occlusion was adjusted. After scanning the arch with tooth preparation, digital mounting was performed using an occlusion scan of the anterior or posterior teeth areas. The accuracy of the positioned jaw relation was evaluated three-dimensionally through positional deviation and angular error of the occlusal plane. Afterwards, the same procedure was repeated on the partially edentulous model to evaluate the accuracy of digital interocclusal record. Kruskal-Wallis test and Mann-Whitney U test were used for statistical analysis, and the significance level was set at 0.05. Results: There was no significant difference in the positional error at the centerof the arch in the digitally established jaw relation depending on the scan area used and remaining tooth conditions (P = 0.53). Theangular error of the occlusal plane was larger when the anterior teeth were used as the overlapping area, and a smaller error value was observed when both posterior teeth were used as the overlapping area (P < 0.001). Conclusion The use of bilateral posterior occlusal scans is recommended when digitally mounting the jaw relation established with temporary teeth during full-mouth fixed prosthetic treatment.

Background: Medullary thyroid carcinoma (MTC) has a poorer prognosis than differentiated thyroid cancers; however, comprehensive data on the long-term outcomes of MTC remain scarce. This study investigated the extended clinical outcomes of MTC and aimed to identify prognostic factors. Methods: Patients diagnosed with MTC between 1980 and 2020 were retrospectively reviewed. Their clinical characteristics, longterm clinical outcomes, and prognostic factors for recurrence and mortality were analyzed. Results: The study included 226 patients (144 women, 82 men). The disease-specific survival (DSS) rates for all MTC patients at 5-, 10-, 20-, and 30-year intervals were 92.7%, 89.4%, 74.3%, and 68.1%, respectively. The recurrence-free survival (RFS) rates were 71.1%, 56.1%, 40.2%, and 32.1% at these intervals. DSS was comparable between the groups from 1980–2009 and 2010–2020 (P=0.995); however, the 1980–2009 group had significantly lower RFS rates (P=0.031). The 2010–2020 group exhibited greater extents of surgical and lymph node dissection (P=0.003) and smaller tumors (P=0.003). Multivariate analysis identified extrathyroidal extension as the strongest prognostic factor for both RFS and DSS. Age >55 years and tumor size of ≥2 cm were also significant prognostic factors for DSS, while hereditary disease and lymph node metastasis were significant for RFS. Survival analysis after propensity-score matching of rearranged during transfection (RET)-negative and non-screened RET-positive groups showed comparable DSS but longer RFS in the RET-negative group. Conclusion Extrathyroidal extension was identified as the strongest prognostic factor for RFS and DSS. Older age and larger tumor size were associated with decreased DSS, while RET mutation and lymph node metastasis significantly impacted RFS.