OBJECTIVE: To measure and analyze the relationships among the posterior tibial slope (PTS), meniscal slope (MS), and meniscus posterior horn thickness (MPHT) of the medial and lateral tibial plateau in healthy people and patients with anteromedial osteoarthritis (AMOA) in Heilongjiang province, so as to provide reference basis for appropriate tibial osteotomy and prosthesis placement angles in knee joint surgeries. METHODS: A retrospective collection of imaging data from knee joint MRI examinations conducted prior to AMOA for various reasons was performed. A total of 103 healthy individuals (healthy group) and 30 AMOA patients (AMOA group) were included. There was no significant difference in the gender composition ratio, side, and body mass index between the two groups ( P>0.05); however, the comparison of ages between the two groups showed a significant difference ( P<0.05). The collected DICOM format image data was imported into the RadiAnt DICOM Viewer software and measured the medial PTS (MPTS), lateral PTS (LPTS), medial MS (MMS), lateral MS (LMS), medial MPHT (MMPHT), and lateral MPHT (LMPHT) with standard methods. The differences of the above indexes between the two groups and between different genders and sides in the two groups were compared, and Pearson correlation analysis was carried out. At the same time, the measured data of healthy group were compared with the relevant literature reported in the past. RESULTS: Compared to the healthy group, the AMOA group exhibited significantly smaller MPTS and LPTS, as well as significantly greater MMPHT and LMPHT, with significant differences ( P<0.05). However, there was no significant difference in the MMS and LMS between the two groups ( P>0.05). The differences in various indicators between genders and sides within the two groups were not significant ( P>0.05). The correlation analysis and regression curves indicated that both MPTS and LPTS in the two groups were positively correlated with their respective ipsilateral MS and MPHT ( P<0.05); as PTS increased, the rate of increase in MS and MPHT tend to plateau. Compared to previous related studies, the MPTS and LPTS measured in healthy group were comparable to those of the Turkish population, exhibiting smaller values than those reported in other studies, while MMS and LMS were relatively larger, and MMPHT and LMPHT were smaller. CONCLUSION In healthy people and AMOA patients in Heilongjiang province, PTS has great individual differences, but there is no significant individual difference in MS. MPHT can play a certain role in retroversion compensation, and its thickness increase may be used as one of the indicators to predict the progression of AMOA. The above factors should be taken into account when UKA is performed, and the posterior tilt angle of tibial osteotomy should be set reasonably after preoperative examination and evaluation.
Humans ; Osteoarthritis, Knee/surgery* ; Retrospective Studies ; Tibia/pathology* ; Male ; Female ; Adult ; Menisci, Tibial/anatomy & histology* ; China ; Knee Joint/pathology* ; Magnetic Resonance Imaging ; Middle Aged ; Aged ; Osteotomy

OBJECTIVE: To investigate the impact of bone mass and volume of low-density zones beneath the tibial plateau on the maximum von Mises stresses experienced by the cartilage and meniscus in the knee joint. METHODS: The study included one healthy adult volunteer, from whom CT scans were obtained, and one patient diagnosed with knee osteoarthrisis (KOA), for whom X-ray films were acquired. A static model of the knee joint featuring a low-density zone was established based on a normal knee model. In the finite element analysis, axial loads of 1 000 N and 1 800 N were applied to the weight-bearing region of the upper surface of the femoral head for model validation and subsequent finite element studies, respectively. The maximum von Mises stresses in the femoral cartilage, as well as the medial and lateral tibial cartilage and menisci, were observed, and the stress percentage of the medial and lateral components were concurrently analyzed. Additionally, HE staining, as well as alkaline magenta staining, were performed on the pathological specimens of patients with KOA in various low-density regions. RESULTS: The results of model validation indicated that the model was consistent with normal anatomical structures and correlated with previous calculations documented in the literature. Static analysis revealed that the maximum von Mises stress in the medial component of the normal knee was the lowest and increased with the advancement of the hypointensity zone. In contrast, the lateral component exhibited an opposing trend, with the maximum von Mises stress in the lateral component being the highest and decreasing as the hypointensity zone progressed. Additionally, the medial component experienced an increasing proportion of stress within the overall knee joint. HE staining demonstrated that the chondrocyte layer progressively deteriorated and may even disappear as the hypointensity zone expanded. Furthermore, alkaline magenta staining indicated that the severity of microfractures in the trabecular bone increased concurrently with the expansion of the hypointensity zone. CONCLUSION The presence of subtalar plateau low-density zone may aggravate joint degeneration. In clinical practice, it is necessary to pay attention to the changes in the subtalar plateau low-density zone and actively take effective measures to strengthen the bone status of the subtalar plateau low-density zone and restore the complete biomechanical function of the knee joint, in order to slow down or reverse the progression of osteoarthritis.
Humans ; Finite Element Analysis ; Knee Joint/physiology* ; Tibia/anatomy & histology* ; Cartilage, Articular/physiology* ; Menisci, Tibial/physiopathology* ; Tomography, X-Ray Computed ; Osteoarthritis, Knee/diagnostic imaging* ; Weight-Bearing ; Bone Density ; Adult ; Stress, Mechanical ; Male ; Middle Aged ; Biomechanical Phenomena ; Female

PURPOSE: End-stage knee osteoarthritis (OA) patients are the primary candidates for total knee arthroplasty (TKA). However, most morphological refinements of TKA prosthesis are based on anatomical data from the knees of healthy individuals. This study aimed to determine whether differences exist in key bony morphological characteristics of the distal femur and proximal tibia between osteoarthritic knees and healthy knees. METHODS: This was a retrospective cross-sectional observational study with a case-control design. Patients who were aged ≥ 50 years, had no history of trauma, fracture, or surgery in the studied knee, and had no obvious knee flexion contracture were included in this study by CT scans. Patients who met the American College of Rheumatology clinical criteria for knee OA were included in the study group. Kellgren-Lawrence grade III or IV knees were studied (for bilateral cases, the more severely affected knee was chosen). Patients who presented with unilateral knee pain or trauma were included in the control group, with CT scans from the opposite (asymptomatic) knee used for analyzing. The studied knee had a Kellgren-Lawrence grade of 0 or I and showed no abnormalities upon physical examination. Archived knee CT scans from 160 patients were divided into 2 groups: the study group (80 moderate-to-severe OA knees) and the control group (80 healthy knees). After 3-dimensional reconstruction and virtual cutting using a CT workstation, 13 morphological parameters of the distal femur and proximal tibia were compared between the 2 groups using independent-samples t-tests. RESULTS: No significant group differences in the femoral anteroposterior dimension (p = 0.797), height of the lateral femoral condyle (p = 0.268), posterior condylar angle (p = 0.240), tibial anteroposterior dimension (p = 0.536), or tibial lateral anteroposterior dimension (p = 0.702) were observed. However, the femoral mediolateral dimension (p = 0.002), distal femoral aspect ratio (femoral mediolateral dimension/femoral anteroposterior dimension) (p < 0.001), height of the femoral trochlear groove (p < 0.001), height of the medial femoral condyle (p < 0.001), tibial mediolateral dimension (p = 0.001), proximal tibial aspect ratio (tibial mediolateral dimension/tibial anteroposterior dimension) (p = 0.004), tibial medial anteroposterior dimension (p = 0.005), and tibial asymmetry ratio (tibial medial anteroposterior dimension/tibial lateral anteroposterior dimension) (p = 0.006) were all significantly greater in the study group. CONCLUSION Knees with moderate-to-severe OA are significantly wider than healthy knees, and OA is a risk factor for increased tibial platform asymmetry. When refining the morphological parameters of TKA prostheses, the specific bony morphological characteristics of OA knees should be taken into account to reduce the potential risk of femoral or tibial component underhang and facilitate optimal balance between tibial component fit and rotational alignment.
Humans ; Osteoarthritis, Knee/pathology* ; Male ; Female ; Cross-Sectional Studies ; Retrospective Studies ; Arthroplasty, Replacement, Knee ; Middle Aged ; Aged ; Case-Control Studies ; Prosthesis Design ; Knee Prosthesis ; Femur/anatomy & histology* ; Tibia/anatomy & histology* ; Tomography, X-Ray Computed ; Knee Joint/diagnostic imaging*

OBJECTIVE: To establish a finite element model of the knee joint based on coronal plane alignment of the knee (CPAK) typing method, and analyze the biomechanical characteristics of different types of knee joints. METHODS: The finite element models of the knee joint were established based on CT scan data of 6 healthy volunteers. There were 5 males and 1 female with an average age of 24.2 years (range, 23-25 years). There were 3 left knees and 3 right knees. According to the CPAK typing method, the knees were rated as types Ⅰ to Ⅵ. Under the same material properties, boundary conditions, and axial loading, biomechanical simulations were performed on the finite element model of the knee joint. Based on the Von Mises stress nephogram and displacement nephogram, the peak stresses of the meniscus, femoral cartilage, and tibial cartilage, and the displacement of the meniscus were compared among different types of knee joints. RESULTS: The constructed finite element model of the knee joint was verified to be effective, and the stress and displacement results were consistent with previous literature. Under the axial load of 1 000 N, the stress nephogram showed that the stress distribution of the medial and lateral meniscus and tibial cartilage of CPAK type Ⅲ knee joint was the most uneven. The peak stresses of the lateral meniscus and tibial cartilage were 9.969 6 MPa and 2.602 7 MPa, which were 173% and 165% of the medial side, respectively. The difference of peak stress between the medial and lateral femoral cartilage was the largest in type Ⅳ knee joint, and the medial was 221% of the lateral. The displacement nephogram showed that the displacement of the medial meniscus was greater than that of the lateral meniscus except for types Ⅲ and Ⅵ knee joints. The difference between medial and lateral meniscus displacement of type Ⅲ knee joint was the largest, the lateral was 170% of the medial. CONCLUSION In the same type of joint line obliquity (JLO), the medial and lateral stress distribution of the knee was more uniform in varus and neutral positions than in valgus position. At the same time, the distal vertex of JLO subgroup can help to reduce the uneven medial and lateral stress distribution of varus knee, but increase the uneven distribution of valgus knee.
Humans ; Finite Element Analysis ; Knee Joint/diagnostic imaging* ; Female ; Biomechanical Phenomena ; Adult ; Male ; Young Adult ; Stress, Mechanical ; Weight-Bearing/physiology* ; Computer Simulation ; Tomography, X-Ray Computed/methods* ; Cartilage, Articular/physiology* ; Range of Motion, Articular ; Menisci, Tibial/anatomy & histology* ; Tibia/anatomy & histology* ; Meniscus/diagnostic imaging* ; Femur/diagnostic imaging* ; Models, Biological

OBJECTIVE: To review the research progress of injection sites of local infiltration analgesia (LIA) in total knee arthroplasty (TKA). METHODS: The relevant domestic and foreign literature in recent years was extensively reviewed. The neuroanatomy of the knee, and the research progress of the selection and the difference of effectiveness between different injection sites of LIA in clinical studies were summarized. RESULTS: Large concentrations of nociceptors are present throughout the various tissues of the knee joint. Patellar tendon, subpatellar fat pad, lateral collateral ligament insertions, iliotibial band insertions, suprapatellar capsule, and posterior capsule were more sensitive to pain. Most current studies support injections into the lateral capsule, collateral ligament, retinaculum, quadriceps tendon, fat pad, and subcutaneous tissue. Whether to inject into the back of the knee and subperiosteum is controversial. CONCLUSION The relative difference of knee tissue sensitivity to pain has guiding significance for the selection of LIA injection site after TKA. Although researchers have conducted clinical trials on injection site and technique of LIA in TKA, there are certain limitations. The optimal scheme has not been determined yet, and further studies are needed.
Humans ; Arthroplasty, Replacement, Knee/methods* ; Pain, Postoperative/prevention & control* ; Pain Management/methods* ; Analgesia/methods* ; Knee Joint/anatomy & histology* ; Anesthesia, Local/methods*

BACKGROUNDDiscoid lateral meniscus was a common meniscal dysplasia and was predisposed to tear. There were some anatomical knee variants in patients with discoid lateral meniscus. The aim of this study was to analyze the relationship between anatomical knee variants and discoid lateral meniscal tears.

METHODSThere were totally 125 cases of discoid lateral meniscus enrolled in this study from February 2008 to December 2013. Eighty-seven patients who underwent arthroscopic surgery for right torn discoid lateral meniscus were enrolled in the torn group. An additional 38 patients who were incidentally identified as having intact discoid lateral menisci on magnetic resonance imaging (MRI) findings were included in the control group. All patients were evaluated for anatomical knee variants on plain radiographs, including lateral joint space distance, height of the lateral tibial spine, height of the fibular head, obliquity of the lateral tibial plateau, squaring of the lateral femoral condyle, cupping of the lateral tibial plateau, lateral femoral condylar notch, and condylar cutoff sign. The relationship between anatomical variants and meniscal tear was evaluated. These anatomical variants in cases with complete discoid meniscus were also compared with those in cases with incomplete discoid meniscus.

RESULTSThere were no significant differences between the two groups in lateral joint space distance (P = 0.528), height of the lateral tibial spine (P = 0.927), height of the fibular head (P = 0.684), obliquity of the lateral tibial plateau (P = 0.672), and the positive rates of squaring of the lateral femoral condyle (P = 0.665), cupping of the lateral tibial plateau (P = 0.239), and lateral femoral condylar notch (P = 0.624). The condylar cutoff sign was significantly different between the two groups, with the prominence ratio in the torn group being smaller than that in the control group (0.74 ± 0.11 vs. 0.81 ± 0.04, P = 0.049). With the decision value of the prominence ratio (0.78) in predicting discoid lateral meniscal tear, the sensitivity and specificity of the cutoff sign were 66% and 71%, respectively. There were no significant differences in radiographic variants between the complete and incomplete discoid lateral meniscal groups.

CONCLUSIONSThe condylar cutoff sign observed on the tunnel view of the radiograph is helpful in predicting meniscal tear in adult patients with discoid lateral meniscus. As for these patients, further MRI test is recommended.

Adolescent ; Adult ; Aged ; Arthroscopy ; Child ; Female ; Humans ; Knee Injuries ; diagnosis ; Knee Joint ; anatomy & histology ; surgery ; Magnetic Resonance Imaging ; Male ; Middle Aged ; Radiography ; Retrospective Studies ; Young Adult

PURPOSE: The purpose of this study was to evaluate the anatomical similarity of three-dimensional (3D) morphometric parameters between right and left knees. MATERIALS AND METHODS: Ten fresh-frozen paired cadaveric knees were tested. Following dissection, footprint areas of the anterior cruciate ligament (ACL) and posterior cruciate ligament (PCL) were measured. Surface scanning was performed using a 3D scanner. Scanned data were reproduced and morphometric parameters were measured on specialized software. After making mirror models, we compared footprint center positions of the ACL and PCL of both sides and calculated the average deviation of 3D alignment between the right- and left-side models. RESULTS: No significant side-to-side differences were found in any morphometric parameters. Bony shapes displayed a side-to-side difference of < 1 mm. Distal femoral and proximal tibial volumes did not present side-to-side differences, either; the average 3D deviations of alignment between the right and left sides were 0.8±0.4/1.1±0.6 mm (distal femur/proximal tibia). Center-to-center distances between the right and left ACL footprints were 2.6/2.7 mm (femur/tibia) for the anteromedial bundle and 2.4/2.8 mm for the posterolateral bundle. They were 1.9/1.5 mm for the anterolateral bundle and 2.2/1.8 mm for the posteromedial bundle of the PCL. CONCLUSIONS: There was a remarkable 3D morphometric similarity between right and left knees. Our results might support the concept of obtaining morphologic reference data from the uninvolved contralateral knee.
Anatomy, Comparative ; Anterior Cruciate Ligament ; Cadaver ; Imaging, Three-Dimensional ; Knee Joint ; Knee ; Posterior Cruciate Ligament

OBJECTIVETo observe the effects of warm needling moxibustion on body mass, knee cartilage andmorphology in rats with knee osteoarthritis (KOA).

METHODSForty SD rats were randomly divided into a normalgroup, a model group, a medication group and a warm needling group, 10 rats in each one. Except the normalgroup, the rats in the remaining three groups were injected with papain to establish the model of KOA. After themodeling, rats in the model group did not receive any treatment; rats in the warm needling group were treated withwarm needling moxibustion at bilateral "Xiqian"; rats in the medication group were treated with intragastric administration of meloxicam; rats in the normal group were treated with 0. 9% NaCl solution (identical dose as medication group) and immobilized as the warm needling group. The treatment was given once a day for consecutive20 days. The body mass, scale of knee cartilage and morphological changes were observed in each group after'treatment.

RESULTSThe increasing of body mass in the medication group and warm needling group was faster than!that in the model group, but slower than that in the normal group (all P<0. 05); the difference between medication group and warm needling group was not statistically significant (P>0. 05). The scale of knee cartilage in thewarm needling group and medication group was significantly lower than that in the model group (both P<0. 05),while the scale in the warm needling group was lower than that in the medication group (P<. 05). Regarding theknee morphology under micro-CT, the relief of knee degeneration and improvement of knee recovery in the warm needlinggroup were superior to those in the medication group.

CONCLUSIONThe warm needling moxibustion could effectively reduce the knee pain, improve the recovery of knee cartilage, which is a safe and effective treatment.

Acupuncture Points ; Animals ; Cartilage ; anatomy & histology ; Disease Models, Animal ; Humans ; Knee Joint ; anatomy & histology ; Male ; Moxibustion ; Osteoarthritis, Knee ; therapy ; Rats ; Rats, Sprague-Dawley ; Treatment Outcome

BACKGROUNDAccuracy of implant placement in total knee arthroplasty (TKA) is crucial. Traditional extramedullary alignment instruments are fairly effective for achieving the desired mean tibial component coronal alignment. We modified the traditional tibial plateau resection technique and evaluated its effect on alignment restoration.

METHODSTwo hundred and eighty-two primary TKAs in our hospital between January 2013 and December 2014 were enrolled in this retrospective study. Group A consisted of 128 primary TKAs performed by one senior surgeon. Preoperative measurement of the tibial resection was conducted on radiographs, and the measured thicknesses of the lateral and medial plateau resection were used to place the tibial alignment guide. Group B consisted of 154 primary TKAs performed by the other senior surgeon, using a traditional tibial plateau resection technique. In all patients, an extramedullary guide was used for tibial resection, and preoperative and postoperative full-leg standing radiographs were used to assess the hip-knee-ankle angle (HKA), femoral component alignment angle (FA), and tibial component alignment angle (TA). A deviation ≥3° was considered unsatisfactory. Data were analyzed by unpaired Student's t-test.

RESULTSThe mean postoperative HKA and TA angles were significantly different between Groups A and B (178.2 ± 3.2° vs. 177.0 ± 3.0°, t = 2.54, P = 0.01; 89.3 ± 1.8° vs. 88.3 ± 2.0°, t = 3.75, P = 0.00, respectively). The mean postoperative FA was 88.9 ± 2.5° in Group A and 88.9 ± 2.6° in Group B, and no significant difference was detected (t = 0.10, P = 0.92). There were 90 (70.3%) limbs with restoration of the mechanical axis to within 3° of neutral alignment and 38 (29.7%) outliers (>3° deviation) in Group A, whereas there were 89 (57.8%) limbs with restoration of the mechanical axis to within 3° of neutral alignment and 65 (42.2%) outliers (>3° deviation) in Group B. The severity of the preoperative alignment deformity was a strong predictor for postoperative alignment.

CONCLUSIONSUsing conventional surgical instruments, preoperative measurement of resection thickness of the tibial plateau on radiographs could improve the accuracy of conventional surgical techniques.

Aged ; Arthroplasty, Replacement, Knee ; methods ; Bone Malalignment ; prevention & control ; Female ; Humans ; Knee Joint ; surgery ; Male ; Postoperative Period ; Retrospective Studies ; Tibia ; anatomy & histology ; surgery

BACKGROUND: The purpose of this study was to determine the shape of the distal femur of Korean women compared with the prostheses currently available in Korea. METHODS: Morphometric data (5 parameters) were measured in 356 resected femurs of Korean women undergoing primary total knee arthroplasty (TKA) utilizing the LCS knee implant (DePuy). The data were then compared with 5 additional contemporary TKA implant systems. RESULTS: Implant designs based on Caucasian population data do not ideally match the distal femoral morphology of Korean women. Overhang at the anterior mediolateral width was observed in 84.8% for the LCS while a gender-specific implant resulted in undercoverage of the bone in 86%. Posterior overhang was observed in up to 51.2%. Most implant designs have a narrower intercondylar notch than the morphologic data of Korean women. CONCLUSIONS: Since there is some difference between the shape of distal femur of Korean women and that of the implants, surgeons should have this in mind when selecting an implant for a patient. These data may also be used as a guideline for future prosthetic design options for Korean women population.
Aged ; Aged, 80 and over ; Arthroplasty, Replacement, Knee/*instrumentation/statistics & numerical data ; Asian Continental Ancestry Group/*statistics & numerical data ; Cohort Studies ; Female ; Femur/*anatomy & histology/*surgery ; Humans ; Knee Joint/surgery ; Middle Aged ; Prosthesis Design ; Republic of Korea