BACKGROUND:Clinical studies suggest that both bone quality and excessive crown-to-implant ratio are factors that affect the success rate of implant surgery,but there is no consensus on how large the crown-to-implant ratio under each bone quality will affect the prognosis of implant repair.OBJECTIVE:To analyze the stress and strain of bone tissue around implant restorations with different crown-to-implant ratios under different bone types after stress loading using three-dimensional finite element method.Combined with the Frost bone mechanics regulation system theory,the physiological limits of bone strain were observed for each bone type within a certain range of crown to implant ratios.METHODS:Cone beam CT data were selected from a patient to establish solid bone block models with four different bone types(class Ⅰ bone:cortical bone thickness 3 mm+dense cancellous bone,class Ⅱ bone:cortical bone thickness 2 mm+relatively dense cancellous bone,class Ⅲ bone:cortical bone thickness 1 mm+relatively low-density cancellous bone,class Ⅳ bone:cortical bone thickness 1 mm+low-density cancellous bone).Implant restorations with five different crown-to-implant ratios(1,1.5,2,2.5,and 3)were created on each bone block model,for a total of 20 models.Vertical and oblique forces were applied to the dental crown to observe the von Mises stress values,strains,and displacement of the cortical and cancellous bones,as well as the degree of implant displacement.RESULTS AND CONCLUSION:(1)In the class Ⅰ bone model,when the crown-to-implant ratio reached 3 under oblique loading,the cortical bone strain exceeded the physiological limit.In the class Ⅱ bone model,under oblique loading,when the crown-to-implant ratio reached 2.5,the cortical bone strain exceeded the physiological limit.In the class Ⅲ bone model,under oblique loading,cortical bone exceeded the physiological limit when the crown-to-implant ratio reached 2.5,while cancellous bone reached the critical physiological limit at 1.In the class Ⅳ bone model,under oblique loading,when the crown-to-implant ratio reached 1.5,2,2.5,and 3,the cortical bone strain exceeded the physiological limit.In the class Ⅳ bone model,all five crown-to-implant ratios of cancellous bone exceeded physiological limits.(2)Under vertical load,the cancellous bone strain exceeded the physiological limit when the crown-root ratio reached 1,2,2.5,and 3 in the class Ⅲ bone model,and when the cancellous bone strain of the five crown-root ratios in the class Ⅳ bone model exceeded the physiological limit.(3)Under oblique or vertical load,the implant displacement of the 20 groups of models did not exceed 100 μm.(4)From the perspective of biomechanics,when patients with insufficient bone height choose implant restoration,the crown-root ratio that class Ⅰ bone can tolerate is up to 2.5 times,the crown-root ratio that class Ⅱ bone can tolerate is up to 2 times,and the crown-root ratio that class Ⅲ and class Ⅳ bones can tolerate is up to 1 times due to excessive strain of cancellous bone;but the crown-root ratio that cortical bone in class Ⅲ bone can tolerate is up to 2 times.Whether class Ⅲ bone can tolerate implant restoration with a high crown-root ratio and whether cancellous bone can tolerate higher strains needs further study.

BACKGROUND:Clinical studies suggest that both bone quality and excessive crown-to-implant ratio are factors that affect the success rate of implant surgery,but there is no consensus on how large the crown-to-implant ratio under each bone quality will affect the prognosis of implant repair.OBJECTIVE:To analyze the stress and strain of bone tissue around implant restorations with different crown-to-implant ratios under different bone types after stress loading using three-dimensional finite element method.Combined with the Frost bone mechanics regulation system theory,the physiological limits of bone strain were observed for each bone type within a certain range of crown to implant ratios.METHODS:Cone beam CT data were selected from a patient to establish solid bone block models with four different bone types(class Ⅰ bone:cortical bone thickness 3 mm+dense cancellous bone,class Ⅱ bone:cortical bone thickness 2 mm+relatively dense cancellous bone,class Ⅲ bone:cortical bone thickness 1 mm+relatively low-density cancellous bone,class Ⅳ bone:cortical bone thickness 1 mm+low-density cancellous bone).Implant restorations with five different crown-to-implant ratios(1,1.5,2,2.5,and 3)were created on each bone block model,for a total of 20 models.Vertical and oblique forces were applied to the dental crown to observe the von Mises stress values,strains,and displacement of the cortical and cancellous bones,as well as the degree of implant displacement.RESULTS AND CONCLUSION:(1)In the class Ⅰ bone model,when the crown-to-implant ratio reached 3 under oblique loading,the cortical bone strain exceeded the physiological limit.In the class Ⅱ bone model,under oblique loading,when the crown-to-implant ratio reached 2.5,the cortical bone strain exceeded the physiological limit.In the class Ⅲ bone model,under oblique loading,cortical bone exceeded the physiological limit when the crown-to-implant ratio reached 2.5,while cancellous bone reached the critical physiological limit at 1.In the class Ⅳ bone model,under oblique loading,when the crown-to-implant ratio reached 1.5,2,2.5,and 3,the cortical bone strain exceeded the physiological limit.In the class Ⅳ bone model,all five crown-to-implant ratios of cancellous bone exceeded physiological limits.(2)Under vertical load,the cancellous bone strain exceeded the physiological limit when the crown-root ratio reached 1,2,2.5,and 3 in the class Ⅲ bone model,and when the cancellous bone strain of the five crown-root ratios in the class Ⅳ bone model exceeded the physiological limit.(3)Under oblique or vertical load,the implant displacement of the 20 groups of models did not exceed 100 μm.(4)From the perspective of biomechanics,when patients with insufficient bone height choose implant restoration,the crown-root ratio that class Ⅰ bone can tolerate is up to 2.5 times,the crown-root ratio that class Ⅱ bone can tolerate is up to 2 times,and the crown-root ratio that class Ⅲ and class Ⅳ bones can tolerate is up to 1 times due to excessive strain of cancellous bone;but the crown-root ratio that cortical bone in class Ⅲ bone can tolerate is up to 2 times.Whether class Ⅲ bone can tolerate implant restoration with a high crown-root ratio and whether cancellous bone can tolerate higher strains needs further study.

Objective To investigate the distribution and antimicrobial resistance profiles of clinically isolated Haemophilus influenzae and Moraxella catarrhalis in hospitals across China from 2015 to 2021,and provide evidence for rational use of antimicrobial agents.Methods Data of H.influenzae and M.catarrhalis strains isolated from 2015 to 2021 in CHINET program were collected for analysis,and antimicrobial susceptibility testing was performed by disc diffusion method or automated systems according to the uniform protocol of CHINET.The results were interpreted according to the CLSI breakpoints in 2022.Beta-lactamases was detected by using nitrocefin disk.Results From 2015 to 2021,a total of 43 642 strains of Haemophilus species were isolated,accounting for 2.91％of the total clinical isolates and 4.07％of Gram-negative bacteria in CHINET program.Among the 40 437 strains of H.influenzae,66.89％were isolated from children and 33.11％were isolated from adults.More than 90％of the H.influenzae strains were isolated from respiratory tract specimens.The prevalence of β-lactamase was 53.79％in H.influenzae strains.The H.influenzae strains isolated from children showed higher resistance rate than the strains isolated from adults.Overall,779 strains of H.influenzae did not produce β-lactamase but were resistant to ampicillin(BLNAR).Beta-lactamase-producing strains showed significantly higher resistance rates to these antimicrobial agents than the β-lactamase-nonproducing strains.Of the 16 191 M.catarrhalis strains,80.06％were isolated from children and 19.94％isolated from adults.M.catarrhalis strains were mostly susceptible to both amoxicillin-clavulanic acid and cefuroxime,evidenced by resistance rate lower than 2.0％.Conclusions The emergence of antibiotic-resistant H.influenzae due to β-lactamase production poses a challenge for clinical anti-infective treatment.Therefore,it is very important to implement antibiotic resistance surveillance for H.influenzae and guide rational antibiotic use.All local clinical microbiology laboratories should actively improve antibiotic susceptibility testing and strengthen antibiotic resistance surveillance for H.influenzae.

The paper reports a 32-year-old female acute myeloid leukemia patient who developed graft-versus-host disease after paternal hematopoietic stem cell transplantation, which subsequently led to renal thrombotic microangiopathy. She subsequently required a kidney transplant from the same donor 5 years later due to renal failure. Considering that both the bone marrow and kidney were from the same donor and the recovery of renal function was favorable, immunosuppressive therapy was discontinued after a short course of anti-rejection treatment, with maintained stable kidney function. This case suggests that under the condition of high chimerism, allogeneic hematopoietic stem cell transplantation and kidney transplantation from the same donor can achieve immune tolerance, potentially improving solid organ transplantation success rate. The findings provide a novel therapeutic approach for solid organ transplantation following allogeneic hematopoietic stem cell transplantation.

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

ObjectiveTo investigate the triglyceride-glucose (TyG) index and the level of serum homocysteine (Hcy) in association with the incidence of stroke in type 2 diabetes mellitus (T2DM) patients. MethodsBased on the chronic disease risk factor surveillance cohort in Pudong New Area, Shanghai, excluding those with stroke in baseline survey, T2DM patients who joined the cohort from January 2016 to October 2020 were selected as the research subjects. During the follow-up period, a total of 318 new-onset ischemic stroke patients were selected as the case group, and a total of 318 individuals matched by gender without stroke were selected as the control group. The Cox proportional hazards regression model was used to adjust for confounding factors and explore the serum TyG index and the Hcy biochemical indicator in association with the risk of stroke. ResultsThe Cox proportional hazards regression results showed that after adjusting for confounding factors, the risk of stroke in T2DM patients with 10 μmol·L⁻¹-¹ and Hcy>15 μmol·L⁻¹ was 1.532 times (95%CI: 1.017‒2.309 times, P=0.041) and 1.738 times (95%CI: 1.119‒2.699 times, P=0.014) higher respectively, compared to T2DM patients with Hcy≤10 μmol·L⁻¹. T2DM patients with TyG>9.074 had 1.396 times higher risk of stroke (95%CI: 1.091‒1.787, P=0.008) compared to those with TyG≤9.074. The study found that urea and α1-antitrypsin (α1-AT) were independent risk factors for the incidence of stroke in T2DM patients. For every unit increase in urea andα1-AT, the risk of stroke in T2DM patients increased by 233.6% (HR=3.336, 95%CI: 1.588‒7.009, P=0.001) and 11.3% (HR=1.113, 95%CI: 1.028‒1.205, P=0.008), respectively. Cumulative risk curves showed that Hcy>10 μmol·L⁻¹ and TyG>9.074 accelerated the time to stroke occurrence in T2DM patients. ConclusionElevated levels of Hcy>10 μmol·L⁻¹ and a higher TyG index are risk factors for stroke in T2DM patients. Effective interventions for Hcy and TyG should be conducted for diabetic patients to reduce the incidence of stroke.

Turning to critical illness is a common stage of various diseases and injuries before death. Patients usually have complex health conditions, while the treatment process involves a wide range of content, along with high requirements for doctor′s professionalism and multi-specialty teamwork, as well as a great demand for time-sensitive treatments. However, this is not matched with critical care professionals and the current state of medical care in China. Telemedicine, which shortens the distance of medical professionals and the gap of disease diagnosis and treatments in various regions through electronic information, can effectively solve the current problem. Therefore, there is an urgent need to develop a standardized, high-quality visualization telemedicine round system .Therefore, experts have been organized to search domestic and foreign literature on telemedicine round for critically ill patients and to form this consensus based on clinical experiences so as to further improve the level of critical care treatments in regions.

To establish a method for detecting Toxoplasma gondii based on recombinant polymerase amplification(RPA)technology and apply it to clinical sample validation of pet cats.Using the 529 repeat sequence of the Toxoplasma gondii gene as the target gene sequence,primers and probes were designed,and the Rep-529 recombinant plasmid was constructed as the standard.A fluorescent RPA reaction system was established.Dilute the plasmid standard 10 times to different concentrations as the detection template for sensitivity testing;Specific testing was conducted using genomic DNA from several parasitic spe-cies,including Toxoplasma gondii,Cryptosporidium,Neosporidium,Trichinella spiralis,Giardia flagellata,Babesia bo-vis and Theileria annulata as templates;Simultaneously,fluorescence RPA and RT-PCR were used to detect 52 positive and 40 negative cats clinical samples,and the coincidence rate of the detection results of the two methods were compared and ana-lyzed.The RPA reaction system was successfully established using PTRep recombinant plasmid as the standard,ToxD-F/ToxD-R as the primer,and RepD-P as the fluorescent probe.The reaction temperature was constant at 39 ℃,the reaction time was 30 minutes,and the detection sensitivity was 1 copy/μL.There is no significant cross reaction with parasites such as Cryptosporidium,Neosporidium,Trichinella spiralis,Giardia,Babesia bovis and Theileria annulata,and the specificity is good.A total of 92 clinical fecal samples from cats were tested,and the positive coincidence rate of fluorescence RPA detection method was higher than that of conventional RT-PCR method(98.08％vs.82.69％),and the difference of the positive rate was not statistically significant(X2=1.392,P＞0.05).The fluorescence RPA detection method for Toxoplasma gondii suc-cessfully established in this study has the characteristics of being fast,sensitive,specific,accurate,and reliable.It can be used as a rapid clinical detection kit for Toxoplasma gondii in cats and other animals,providing new technical support for the subsequent epidemiological monitoring and precise clinical diagnosis of toxoplasmosis in cats,other animals,and humans in the future.

Objective To investigate the feasibility and safety of bedside transesophageal echocardiography(TEE)-guided atrial septostomy in patients undergoing extracorporeal membrane oxygenation(ECMO)support.Methods Eight patients(2 females and 6 males)who developed pulmonary edema during VA-ECMO treatment between January 2020 and October 2024 were enrolled.All patients underwent bedside TEE-guided atrial septal puncture,followed by gradual balloon dilation using an Inoue balloon(diameter:18-24 mm).The endpoint for dilation was defined as mean left atrial pressure＜15 mmHg.Post-procedure evaluation included assessment of the septal defect size,mean left atrial pressure,and improvement in bilateral pulmonary edema.Results The mean age of all 8 patients was(43.50±16.84)years old.Atrial septostomy was successfully performed in all patients.The mean balloon dilation diameter was(22.75±2.68)mm,resulting in a mean septal defect size of(6.31±0.37)mm.The mean left atrial pressure significantly decreased from(26.63±1.77)mmHg pre-procedure to(12.75±1.28)mmHg post-procedure(P＜0.001).All patients demonstrated marked improvement in bilateral pulmonary edema,and six patients also showed a significant reduction in the severity of mitral regurgitation following the procedure.No procedure-related complications were observed.Conclusions Bedside TEE-guided atrial septostomy is safe and effective for reducing left heart loading during ECMO support and improving pulmonary edema.