Purpose: Overactive bladder (OAB) symptoms may improve following surgical correction of cystocele. This study aimed to evaluate changes in urgency, the primary symptom of OAB, and identify factors associated with improvement in urgency after surgical treatment for cystocele. Methods: We conducted a retrospective analysis of medical records for patients who underwent surgical treatment for cystocele and had preoperative urgency measuring ≥3 on a 5-point urinary sensation scale. Patients were categorized into 2 groups based on their urgency status 3 months postsurgery: those with improved urgency and those without improvement. Improvement was defined as a reduction of 2 or more points on the scale following surgery. We compared preoperative clinical and urodynamic factors between the 2 groups. Results: A total of 137 patients were included in the study, with 98 (71.5%) showing improvement in urgency symptoms after surgery. The improved group had a significantly higher prevalence of preoperative urgency urinary incontinence (UUI) (62.2% vs. 30.8%, P=0.001) and bladder outlet obstruction (43.9% vs. 20.5%, P=0.011) compared to the nonimproved group. Urodynamic evaluations indicated that the detrusor pressure at maximum flow rate (PdetQmax) was significantly higher in the improved group than in the nonimproved group (P=0.004). Multivariate logistic regression analysis identified preoperative UUI, higher PdetQmax, and lower vaginal parity as independent predictors of improvement in urgency postoperatively. Conclusions Preoperative UUI, higher PdetQmax, and lower vaginal parity were significant predictors of postoperative improvement in urgency. Both clinical and urodynamic factors may help identify patients with cystocele and preoperative urgency who are most likely to benefit from anatomical correction.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Background: and Purpose We aimed to determine the proportion of Korean patients with early Alzheimer’s disease (AD) who are eligible to receive lecanemab based on the United States Appropriate Use Recommendations (US AUR), and also identify the barriers to this treatment. Methods: We retrospectively enrolled 6,132 patients with amnestic mild cognitive impairment or mild amnestic dementia at 13 hospitals from June 2023 to May 2024. Among them, 2,058 patients underwent amyloid positron emission tomography (PET) and 1,199 (58.3%) of these patients were amyloid-positive on PET. We excluded 732 patients who did not undergo brain magnetic resonance imaging between June 2023 and May 2024. Finally, 467 patients were included in the present study. Results: When applying the criteria of the US AUR, approximately 50% of patients with early AD were eligible to receive lecanemab treatment. Among the 467 included patients, 36.8% did not meet the inclusion criterion of a Mini-Mental State Examination (MMSE) score of ≥22. Conclusions Eligibility for lecanemab treatment was not restricted to Korean patients with early AD except for those with an MMSE score of ≥22. The MMSE criteria should therefore be reconsidered in areas with a higher proportion of older people, who tend to have lower levels of education.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Background: and Purpose We aimed to determine the proportion of Korean patients with early Alzheimer’s disease (AD) who are eligible to receive lecanemab based on the United States Appropriate Use Recommendations (US AUR), and also identify the barriers to this treatment. Methods: We retrospectively enrolled 6,132 patients with amnestic mild cognitive impairment or mild amnestic dementia at 13 hospitals from June 2023 to May 2024. Among them, 2,058 patients underwent amyloid positron emission tomography (PET) and 1,199 (58.3%) of these patients were amyloid-positive on PET. We excluded 732 patients who did not undergo brain magnetic resonance imaging between June 2023 and May 2024. Finally, 467 patients were included in the present study. Results: When applying the criteria of the US AUR, approximately 50% of patients with early AD were eligible to receive lecanemab treatment. Among the 467 included patients, 36.8% did not meet the inclusion criterion of a Mini-Mental State Examination (MMSE) score of ≥22. Conclusions Eligibility for lecanemab treatment was not restricted to Korean patients with early AD except for those with an MMSE score of ≥22. The MMSE criteria should therefore be reconsidered in areas with a higher proportion of older people, who tend to have lower levels of education.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Background: and Purpose We aimed to determine the proportion of Korean patients with early Alzheimer’s disease (AD) who are eligible to receive lecanemab based on the United States Appropriate Use Recommendations (US AUR), and also identify the barriers to this treatment. Methods: We retrospectively enrolled 6,132 patients with amnestic mild cognitive impairment or mild amnestic dementia at 13 hospitals from June 2023 to May 2024. Among them, 2,058 patients underwent amyloid positron emission tomography (PET) and 1,199 (58.3%) of these patients were amyloid-positive on PET. We excluded 732 patients who did not undergo brain magnetic resonance imaging between June 2023 and May 2024. Finally, 467 patients were included in the present study. Results: When applying the criteria of the US AUR, approximately 50% of patients with early AD were eligible to receive lecanemab treatment. Among the 467 included patients, 36.8% did not meet the inclusion criterion of a Mini-Mental State Examination (MMSE) score of ≥22. Conclusions Eligibility for lecanemab treatment was not restricted to Korean patients with early AD except for those with an MMSE score of ≥22. The MMSE criteria should therefore be reconsidered in areas with a higher proportion of older people, who tend to have lower levels of education.

Objective: To identify proteins regulated by baicalin in a rat model of ischemic stroke. Methods: Adult male Sprague Dawley rats underwent middle cerebral artery occlusion (MCAO) or sham surgery and received intraperitoneal baicalin (100 mg/kg) or vehicle 1 h before surgery. Neurobehavioral assessments were performed 24 h after MCAO, and cerebral cortex tissues were collected. Cortical damage was evaluated using 2,3,5-triphenyltetrazolium chloride staining and hematoxylin-eosin staining. Protein expression changes between groups were assessed by liquid chromatography-tandem mass spectrometry, and selected targets were validated by reverse transcription-polymerase chain reaction. Results: MCAO induced marked neurological deficits, infarction, and histopathological damage, all of which were significantly attenuated by baicalin treatment. MCAO decreased adenylate cyclase type 1 and solute carrier family 25 member 12 levels, and baicalin mitigated these reductions. Baicalin also reduced MCAO-induced increases in C-reactive protein and apolipoprotein C-II, as well as alpha-1 microglobulin, murinoglobulin, and hemoglobin subunit B, proteins associated with inflammation, lipid metabolism, mitochondrial function, and cellular injury. Conclusions and Relevance: Baicalin exerts neuroprotective effects in cerebral ischemia by modulating proteins involved in energy metabolism, myelination, and neuroinflammation.These findings support baicalin as a promising therapeutic candidate in experimental stroke models.