Sacroiliac complex injuries are commonly seen in high-energy pelvic fractures. The injuries make a big difference in treatment patterns due to the diverse injury types, posing considerable challenges in formulating optimal treatment strategies, and hence are persistent clinical difficulties in orthopedic trauma. The clinical management of sacroiliac complex injuries presents several key challenges such as a non-negligible rate of missed diagnoses in associated vascular and visceral injuries, absence of standardized protocols for surgical approaches and reduction-fixation strategies across different injury patterns, and ongoing controversies regarding surgical indications and optimal timing for patients combined with concomitant lumbosacral plexus injuries. Currently, no systematic clinical guidelines are available for the diagnosis and treatment of sacroiliac complex injuries both domestically and internationally. To this end, the Pelvic and Acetabular Surgery Group, Orthopedic Branch, China International Exchange and Promotive Association for Medical and Health Care and Orthopedic Physician Branch, Chinese Medical Doctor Association organized a panel of domestic experts in the field to develop the Clinical guideline for the diagnosis and treatment of sacroiliac complex injuries ( version 2025), based on evidence-based medicine and adhering to the principles of scientific rigor, clinical applicability, and innovation. These guidelines provided 11 recommendations covering diagnosis, therapeutic principles and techniques, management protocols for lumbosacral plexus injuries, outcome evaluation, and postoperative rehabilitation pathways, etc., aiming to standardize the clinical management of sacroiliac complex injuries.

ObjectiveTo investigate the therapeutic effect of Siegesbeckiae Herba water decoction （SWD） at different doses on atherosclerosis （AS） in a mouse model induced by a high-fat diet and analyze its potential mechanism of action. MethodsThirty-six male ApoE^-/- mice were randomly divided into six groups： blank control group， model group， low-dose， medium-dose， and high-dose SWD groups， and positive control group. Firstly， the AS mouse model was created by feeding mice a high-fat diet. After successful modeling， the low-， medium-， and high-dose SWD groups were intragastrically administered with SWD at 0.65， 1.3， 2.6 g·kg^-1， respectively. The positive control group was intragastrically administered with 30 mg·kg^-1 of atorvastatin calcium aqueous solution， while the blank and model groups received an equal volume of 0.9% sodium chloride solution via oral gavage， all administered for 12 weeks. During the administration period， the general condition of the mice was observed and recorded daily. Before sampling， color Doppler ultrasound was performed to observe the pathological changes in atherosclerotic plaques in the aortic wall of mice. Hematoxylin-eosin （HE） staining was used to observe the pathological changes in aortic tissue in mice， and oil red O staining was used to detect the atherosclerotic plaque area in the aorta. Enzyme-linked immunosorbent assay （ELISA） was used to detect the serum lipid indices and the levels of interleukins （IL-1β， IL-4， IL-6， and IL-10） and tumor necrosis factor-α （TNF-α） in mice. Protein expression levels of IKKα， IKKβ， and NF-κB p65 in mouse aortic tissue were detected by Western blot. ResultsCompared with the blank control group， the model group showed a significant increase in body weight. The results of color Doppler ultrasound showed enhanced vascular wall echo， suggesting the presence of atherosclerotic plaques. HE staining showed foam cell aggregation， fibrous connective tissue proliferation， and vascular intima injury in the aortic tissue. Oil red O staining showed a significant increase in the plaque area in the aortic tissue （P<0.01）. ELISA results indicated significantly elevated levels of IL-1β， IL-6， TNF-α， total cholesterol （TC）， triglyceride （TG）， and low-density lipoprotein （LDL） in mouse serum （P<0.01）， as well as significantly decreased levels of IL-4， IL-10， and high-density lipoprotein （HDL） （P<0.01）. Western blot results showed that the expression of IKKα， IKKβ， and NF-κB p65 in mouse aortic tissue increased significantly （P<0.01）. Compared with those in the model group， mice in the middle- and high-dose SWD groups showed significant weight loss. In the high-dose group， the aortic vascular wall echoes were weakened， and the atherosclerotic plaques were reduced. The aortic lesions of mice in the medium- and high-dose SWD groups were significantly alleviated. The plaque area percentage showed an inverse correlation with the administered dose in all groups treated with SWD （P<0.05）. In the medium-dose SWD group， serum levels of IL-1β， IL-6， TNF-α， TC， TG， and LDL were significantly decreased （P<0.05， P<0.01）， while those of IL-4 and IL-10 were significantly increased （P<0.01）. In the high-dose SWD group， levels of IL-1β， IL-6， TNF-α， TC， TG， and LDL were significantly decreased （P<0.01）， while IL-4， IL-10， and HDL were significantly increased （P<0.01）. The IKKα and IKKβ expression was significantly decreased in the low-dose SWD group （P<0.05）， and IKKα， IKKβ， and NF-κB p65 were significantly decreased in the medium- and high-dose SWD groups （P<0.05， P<0.01）. ConclusionSWD may exert therapeutic effects on AS by regulating the expression of related inflammatory factors through the NF-κB signaling pathway， thereby reducing inflammation， plaque area， and lipid content in the body.

Sacroiliac complex injuries are commonly seen in high-energy pelvic fractures. The injuries make a big difference in treatment patterns due to the diverse injury types, posing considerable challenges in formulating optimal treatment strategies, and hence are persistent clinical difficulties in orthopedic trauma. The clinical management of sacroiliac complex injuries presents several key challenges such as a non-negligible rate of missed diagnoses in associated vascular and visceral injuries, absence of standardized protocols for surgical approaches and reduction-fixation strategies across different injury patterns, and ongoing controversies regarding surgical indications and optimal timing for patients combined with concomitant lumbosacral plexus injuries. Currently, no systematic clinical guidelines are available for the diagnosis and treatment of sacroiliac complex injuries both domestically and internationally. To this end, the Pelvic and Acetabular Surgery Group, Orthopedic Branch, China International Exchange and Promotive Association for Medical and Health Care and Orthopedic Physician Branch, Chinese Medical Doctor Association organized a panel of domestic experts in the field to develop the Clinical guideline for the diagnosis and treatment of sacroiliac complex injuries ( version 2025), based on evidence-based medicine and adhering to the principles of scientific rigor, clinical applicability, and innovation. These guidelines provided 11 recommendations covering diagnosis, therapeutic principles and techniques, management protocols for lumbosacral plexus injuries, outcome evaluation, and postoperative rehabilitation pathways, etc., aiming to standardize the clinical management of sacroiliac complex injuries.

Objective To evaluate the efficacy and safety of 3D printing patient-specific external guide template in assisting minimally invasive screwing for treatment of pelvic and acetabular fractures.Methods The clinical and follow-up data of 39 pelvic or acetabular fractures were retrospectively analyzed which had been treated from June 2016 to February 2018 at Department of Orthopaedics,Wuhan Union Hospital.The patients were divided into a template group and a freehand group.In the template group,there were 14 men and 7 women with an age of 46.3 ± 18.2 years and 17 pelvic fractures and 4 acetabular fractures;in the freehand group,there were 12 men and 6 women with an age of 43.8 ± 12.2 years and 14 pelvic fractures and 4 acetabular fractures.The 2 groups were compared in terms of operation time,fluoroscopic frequency,guide wire adjustments,fracture reduction,screw penetration rate,function evaluation and adverse events.Results All the 39 patients were followed up for 9 to 13 months (average,11.6 months).A total of 42 screws were placed in the template group and 35 screws in the freehand group.The values of operation time (43.8 ± 22.2 min),fluoroscopic frequency (29.6 ± 10.7 times) and guide wire adjustments (1.8 ± 1.2 times) in the external guide template group were all significantly lower than those in the freehand group (73.8 ±22.6 min,54.6 ± 16.5 times and 9.8 ±2.8 times,respectively) (P ＜0.05).There were no significant differences between the 2 groups in screw penetration rate,rate of satisfactory reduction,Majeed scores for pelvic function or modified Merle d'Aubigné scores at the last follow-ups (P ＞ 0.05).One case in the freehand group experienced numbness after operation on unilateral dorsi pedis which disappeared at 3-month follow-up.Conclusion The 3D printing patient-specific external guide template can reduce fluoroscopic frequency,save operation time and improve accuracy of screw insertion,providing a new means for minimally invasive treatment of pelvis and acetabular fractures.

Objective: To explore the clinical efficacy of combined plates through superior-ilioinguinal approach for acetabular fractures involving anterior wall and anterior column. Methods: Data of twelve patients with acetabular fractures involving anterior column and anterior wall who were treated by combined plates from June 2015 to August 2017 were retrospectively analyzed. Among them 9 cases were males and 3 cases were females, with an average age of 55.4 years old (range, 22-69 years old). Three cases were combined with posterior hemitransverse fractures. Six cases were combined with posterior column fractures. The mean time from injury to operation was 7.2 d (range, 5-12 d). Simultaneous management of anterior wall and anterior column fractures were achieved through single superior-ilioinguinal approach using the novel combined plates in all patients. The image results were evaluated by Matta’s standard and the functional outcome was evaluated by the Matta's improved Merle d'Aubigné-Postel scores system at the final follow-up. Results: All 12 patients were followed up for average 18.3 months (range, 12-24 months). Average blood loss was 560 ml (range, 200-1 200 ml) and average operative time was 102 min (range, 88-190 min). The mean time of bony union was 2.9 months (range, 2.5-4.5 months). The quality of postoperative fracture reduction was evaluated according to Matta’s standard, of which there were 7 cases anatomic, 3 cases satisfactory, and 2 cases unsatisfactory, with an anatomic or satisfactory rate of 83.3%(10/12). The average Matta’s improved Merle d’Aubigne-Postel score was 16.1 (range, 12-18), and there were 8 cases excellent, 2 cases good, 1 case fair and 1 case poor, with an excellent or good rate of 83.3%(10/12). Rupture of the peritoneum occurred in one patient during the surgery which was repaired immediately. One patient suffered obturator nerve palsy and was fully recovered in one year. No inguinal hernia, surgical site infection and femoral head avascular necrosis occurred. Conclusion The combined plates could provide simultaneous fixation for anterior column and anterior wall fractures firmly through single superior-ilioinguinal approach. Satisfactory reduction and functional outcomes could be achieved by the novel plates.

Objective To explore the clinical effectiveness and reliability of combined acetabular quadrilateral surface plates for the treatment of both column fractures.Methods From June 2016 to August 2017,data of 15 cases with acetabular both column fractures who were treated in our department were retrospectively analyzed.Among them 9 cases were male and 6 were female.The mean age was 42.8 years (range,26-68 years).All cases were both column fractures according to the LetournelJudet's classification,including 4 cases combined with posterior wall fracture.Before operation,the pelvic CT thin layer scanning data of patients were collected in DICOM format,and then the data were imported to print the simulated model by 3D printing technology in order to understand the characteristics of fracture directly.The contralateral half pelvis was mirror printed in order to simulate the placement of combined quadrilateral surface plates and preshape all plates.During operation,infrapectineal main plate,pubo-ischiatic plate and ilio-ischiatic plate were placed consequently to fix the anterior column,"middle column" and posterior column respectively.The pubo-ischiatic and ilio-ischiatic plates were combined with the main plate.All cases were operated by supra-ilioinguinal approach.Results The average incision length was 11 cm (range,9-13 cm).The average operative time was 150 min (range,100-240 min).The average blood loss was 850 ml (range,600-1500 ml).Once reduction was obtained,plates could be placed easily and adhere to bone surface well.The quality of postoperative fracture reduction was evaluated according to Matta standard,of which there were 9 cases excellent,4 cases good,and 2 cases poor,with an excellent rate of 86.7％ (13/15).All patients were followed up for an average time of 10 months (range,6-12 months).At the latest follow-up,the average modified Merle d'Aubigne and Postel score was 16.4 (range,12-18),and there were 8 cases excellent,4 cases good,2 cases fair and 1 case poor,with an excellent rate of 80.0％ (12/15).Conclusion For the treatment of acetabular both column fractures,the combined quadrilateral surface plates could resist the medial displacement of quadrilateral area,and on the other hand the total floating posterior column and ischium could be fixed firmly.At the same time,this plate system is a multi-dimensional framework fixation,which is more effective and safer with lower complications rate,resulting in a satisfactory clinical outcomes.

Objective To investigate the feasibility and efficacy of combinational acetabular quadrilateral surface plates in treating elderly patients with acetabular fractures.Methods A retrospective case series study was conducted on the clinical data of eight elderly patients with acetabular fractures admitted between August 2016 and June 2017.There were five males and three females,with an average age of 64.2 years (range,60-68 years).According to the Letournel-Judet's classification,there were four patients with both column fractures,two T-shaped fractures,two anterior column and posterior hemitransverse fractures,among which three were combined with posterior wall fractures.Before operation,the artificial pelvis model was prepared by 3D printing for simulating the placement of combinational plates in the quadrilateral surface,and the plates were shaped for operation use.During operation,through the high iliac inguinal approach,the infrapectineal plate,pubo-ischiatic plate,and ilio-ischiatic plate were placed successively to fix anterior column," middle column",and posterior column,respectively.The pubo-ischiatic and ilio-ischiatic plates were combined with the infrapectineal plate.After fracture reduction,internal fixation was completed at one time.The incision length,operation time,and intraoperative blood loss were recorded.Postoperative fracture reduction was evaluated by Matta standard,and function of hip joint by modified Merle d'Aubigné and Postel scoring system.The complications were recorded.Results All the patients were followed up for 3 12 months (mean,6.8 months).The average incision length was 10 cm (range,8-12 cm).The average operation time was 130 min (range,100-180 min).The average blood loss was 600 ml (range,350-1 000 ml).According to the Matta standard,six patients got excellent result,one good,and one fair,with an excellent and good rate of 7/8.With respect to the hip joint function at the last follow up,the result was excellent in four patients,good in two,fair in one and bad in one,with an excellent and good rate of 6/8.No iatrogenic vascular injury,inguinal hernia or pulmonary embolism occurred during operation.No traumatic arthritis or avascular necrosis of femoral head occurred after operation.Conclusions The fixation from inside to outside by using combinational quadrilateral surface plates is in accordance with the biomechanical characteristics of hip joint,which enables better function recovery,especially for elderly patients with acetabular fractures involving quadrilateral surface.Combined with 3D printing technique for preoperative planning,it can reduce operation time,blood loss and postoperative complications.

Objective To investigate the clinical outcomes in the treatment of complex acetabular fractures through a single supra-ilioinguinal approach after the application of preoperative 3D printing and rapid prototyping simulating the operative procedure.Methods From January 2013 to January 2016,24 cases of complex pelvic and acetabular fractures in our hospital were retrospectively analyzed.Among them 18 cases were male and 6 were female.The average age was 39.2+±13.8 years (range,24-68 years).According to Letoumel-Judet's classification,there were 6 cases of transverse,4 cases of T shaped,4 cases of combined anterior column and posterior hemi-transverse (ACPHT) and 10 cases of 2-column fractures.The time from injured to operation averaged 9 days (range,4-18 days).Before operation,pelvic AP view,three-dimensional CT as well as CTA of iliac blood vessels was taken routinely in all cases.The CT and CTA scan data were then imported into Mimics software for 3D reconstruction.Surgical simulation and optimal placement of internal fixations were performed on computer.After that,the individual simulated model of the pelvis was printed by the use of 3D printing and rapid prototyping technique.The order of reduction,selection and optimal position of the implants were determined.The plates were bent before operation and the length and direction of the screws were recorded.A uniform supra-ilioinguinal approach was used in all cases.Results The length of incision averaged 9 cm (range,8-13 cm).The operative time average 130 min (range,90-220 min).The blood loss averaged 600 ml (range,300-1 500 ml).Once a satisfactory reduction was obtained,single placement of the plates was achieved.In accordance with the preoperative plan,the plates were perfectly fitted to the bone surface.The 24 patients were followed for an average time of 18.3 months (range,15-30 months).The fractures healed in all cases.The average healing time was 4.2 months (range,3-6 months).According to Matta criteria,there were 16 cases of excellent,6 cases of good,2 cases of poor and the excellent rate was 91.7％ (22/24).The average modified Merle d'Aubigne score was 16.5 (range,13-18).The functional outcome was excellent in 13 cases,good in 6 cases and poor in 5 cases.The excellent rate of hip functions was 79.2％ (19/24).There were 2 cases of femoral lateral cutaneous nerve injury (recovered one month later) and another 1 case of fat liquefaction of the incision happened three days postoperatively (the wound healed completely after several dressing changes).No inguinal hernia or abdominal wall hemias was found.No other postoperative complications was found.Conclusion The application of 3D printing and rapid prototyping technique allows preoperatively simulating reduction in vitro,determining the optimal position of the implants,bending the plates and measuring the length of the screws in advance,which could largely reduce the operative time,intraoperative blood loss and occurrence of postoperative complications.Adopting supra-ilioinguinal approach for the treatment of complex acetabular fractures with a small incision and less trauma,a full exposure could be obtained,so the reduction and fixation of the anterior,posterior and middle column (also named pubo-ischiatic column) could be completed in a direct visualization,resulting in a satisfactory clinical outcomes.