Apical microsurgery is accurate and minimally invasive, produces few complications, and has a success rate of more than 90%. However, due to the lack of awareness and understanding of apical microsurgery by dental general practitioners and even endodontists, many clinical problems remain to be overcome. The consensus has gathered well-known domestic experts to hold a series of special discussions and reached the consensus. This document specifies the indications, contraindications, preoperative preparations, operational procedures, complication prevention measures, and efficacy evaluation of apical microsurgery and is applicable to dentists who perform apical microsurgery after systematic training.
Microsurgery/standards* ; Humans ; Apicoectomy ; Contraindications, Procedure ; Tooth Apex/diagnostic imaging* ; Postoperative Complications/prevention & control* ; Consensus ; Treatment Outcome

Pulpotomy, which belongs to vital pulp therapy, has become a strategy for managing pulpitis in recent decades. This minimally invasive treatment reflects the recognition of preserving healthy dental pulp and optimizing long-term patient-centered outcomes. Pulpotomy is categorized into partial pulpotomy (PP), the removal of a partial segment of the coronal pulp tissue, and full pulpotomy (FP), the removal of whole coronal pulp, which is followed by applying the biomaterials onto the remaining pulp tissue and ultimately restoring the tooth. Procedural decisions for the amount of pulp tissue removal or retention depend on the diagnostic of pulp vitality, the overall treatment plan, the patient's general health status, and pulp inflammation reassessment during operation. This statement represents the consensus of an expert committee convened by the Society of Cariology and Endodontics, Chinese Stomatological Association. It addresses the current evidence to support the application of pulpotomy as a potential alternative to root canal treatment (RCT) on mature permanent teeth with pulpitis from a biological basis, the development of capping biomaterial, and the diagnostic considerations to evidence-based medicine. This expert statement intends to provide a clinical protocol of pulpotomy, which facilitates practitioners in choosing the optimal procedure and increasing their confidence in this rapidly evolving field.
Humans ; Calcium Compounds/therapeutic use* ; Consensus ; Dental Pulp ; Dentition, Permanent ; Oxides/therapeutic use* ; Pulpitis/therapy* ; Pulpotomy/standards*

Digital intraoral scanning is a hot topic in the field of oral digital technology.In recent years,digital intra-oral scanning has gradually become the mainstream technology in orthodontics,prosthodontics,and implant dentistry.The precision of digital intraoral scanning and the accuracy and stitching of data collection are the keys to the success of the impression.However,the operators are less familiar with the intraoral scanning characteristics,imaging process-ing,operator scanning method,oral tissue specificity of the scanned object,and restoration design.Thus far,no unified standard and consensus on digital intraoral scanning technology has been achieved at home or abroad.To deal with the problems encountered in oral scanning and improve the quality of digital scanning,we collected common expert opin-ions and sought to expound the causes of scanning errors and countermeasures by summarizing the existing evidence.We also describe the scanning strategies under different oral impression requirements.The expert consensus is that due to various factors affecting the accuracy of digital intraoral scanning and the reproducibility of scanned images,adopting the correct scanning trajectory can shorten clinical operation time and improve scanning accuracy.The scanning trajec-tories mainly include the E-shaped,segmented,and S-shaped methods.When performing fixed denture restoration,it is recommended to first scan the abutment and adjacent teeth.When performing fixed denture restoration,it is recommend-ed to scan the abutment and adjacent teeth first.Then the cavity in the abutment area is excavated.Lastly,the cavity gap was scanned after completing the abutment preparation.This method not only meets clinical needs but also achieves the most reliable accuracy.When performing full denture restoration in edentulous jaws,setting markers on the mucosal tissue at the bottom of the alveolar ridge,simultaneously capturing images of the vestibular area,using different types of scanning paths such as Z-shaped,S-shaped,buccal-palatal and palatal-buccal pathways,segmented scanning of dental arches,and other strategies can reduce scanning errors and improve image stitching and overlap.For implant restora-tion,when a single crown restoration is supported by implants and a small span upper structure restoration,it is recom-mended to first pre-scan the required dental arch.Then the cavity in the abutment area is excavated.Lastly,scanning the cavity gap after installing the implant scanning rod.When repairing a bone level implant crown,an improved indi-rect scanning method can be used.The scanning process includes three steps:First,the temporary restoration,adjacent teeth,and gingival tissue in the mouth are scanned;second,the entire dental arch is scanned after installing a standard scanning rod on the implant;and third,the temporary restoration outside the mouth is scanned to obtain the three-di-mensional shape of the gingival contour of the implant neck,thereby increasing the stability of soft tissue scanning around the implant and improving scanning restoration.For dental implant fixed bridge repair with missing teeth,the mobility of the mucosa increases the difficulty of scanning,making it difficult for scanners to distinguish scanning rods of the same shape and size,which can easily cause image stacking errors.Higher accuracy of digital implant impres-sions can be achieved by changing the geometric shape of the scanning rods to change the optical curvature radius.The consensus confirms that as the range of scanned dental arches and the number of data concatenations increases,the scanning accuracy decreases accordingly,especially when performing full mouth implant restoration impressions.The difficulty of image stitching processing can easily be increased by the presence of unstable and uneven mucosal mor-phology inside the mouth and the lack of relatively obvious and fixed reference objects,which results in insufficient ac-curacy.When designing restorations of this type,it is advisable to carefully choose digital intraoral scanning methods to obtain model data.It is not recommended to use digital impressions when there are more than five missing teeth.

Objective:To evaluate the repair protocols for intraoperative cerebrospinal fluid (CSF) leaks after endoscopic endonasal clival malignancy resection (EECR) and to analyze the risk factors of surgical complication.Methods:The clinical data of patients who underwent EECR and had intraoperative CSF leaks in XuanWu Hospital, Capital Medical University between January 2012 and January 2024 were reviewed. The pathological results, imaging data, location of the dural defect, degree of intraoperative CSF leaks, repair materials, complications such as postoperative central nervous system (CNS) infections, types of antibiotics used, bacterial culture and drug sensitivity results, secondary repair, and follow-up results were collected. IBM SPSS 26 software was used to evaluate the effectiveness of the repair. Additionally, statistical analysis was conducted on perioperative complications such as CNS infections.Results:Twenty-eight patients underwent 31 EECR and 36 skull base reconstructions. There were 14 females and 14 males, aged from 4 to 70 years old, with a median of 53 years. For the repair, autologous materials such as free turbinate flap, free nasoseptal flap, pedicled nasoseptal flap, and fascia lata combined with mashed muscle were used. Initial reconstruction was successful in 26 cases, while 5 patients required a second repair, which was also successful. Postoperatively CNS infections occurred in 4 patients, and all of whom were cured. Follow-up ranged from 3 to 146 months, with no delayed CSF leak reported. The infection rate was significantly higher in patients whose first repair failed compared to those whose repair was successful (Fisher exact test, P<0.001). Conclusions:The use of different autologous materials based on the patient′s condition can effectively repair CSF leakage that occurs during EECR. Howerver, the success rate of initial repair requires improvement, as the risk of CNS infection significantly increases after a failed repair..

With the advent of big data era and improvement of computer performance, the artificial intelligence (AI) technology has rapidly boosted in the field of stomatology. Dental caries is one of the cutting-edge research domains in stomatology. The application of AI in dental caries is expected to promote intelligent, precise and high-efficient diagnosis and treatment of caries. This article focuses on the application of AI in medical-aided diagnosis, treatment and risk prediction of caries and discusses their challenges.

Objective:To study the clinical efficacy of digital design combined with three-dimensional (3D) printing model minimally invasive extraction of complex impacted mandibular third molars.Methods:Eight patients who visited the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology from April 2023 to March 2024 were included, including 3 males and 5 females, aged from 27 to 57 years old. The impacted mandibular third molars of all patients were closely related to the mandibular canal, and part of the dental tissue entered the mandibular canal. Preoperative digital design was used to simulate the intraoperative tooth segmentation and bone removal operation of the power system and the segmented tooth dislocation path, and analyze the tooth extraction resistance. The mandibular teeth, mandibular canal and mandibular model were three-dimensionally printed using light-curing resin inkjet. During the operation, an endoscope was used combined with the 3D printed model to minimally invasively extract the impacted mandibular third molar. Quantitative sensory testing of the patient′s lower lip skin on the operated side was performed before surgery, 2 days after surgery, and 7 days after surgery. Clinical data such as operation time were collected. A paired sample t test was performed on the 2 and 7 days postoperative data and the preoperative data to compare the data differences.Results:All 8 patients successfully completed preoperative design, model printing and minimally invasive surgery. The number of teeth segmented in the preoperative design was (4.4±1.3), and the number of teeth segmented in the actual operation was (4.0±1.1). The operation time was (33.3±13.0) min. None of the patients had postoperative numbness of the lower lip or other postoperative complication. It was observed endoscopically that the inferior alveolar neurovascular bundle was exposed in the extraction socket during the operation. The patient′s pressure pain threshold 2 days after surgery (0.601±1.170) was significantly lower than before surgery (1.251±1.109) ( t=2.83, P=0.025). Conclusions:For complicated impacted mandibular third molars, digital design combined with 3D printing model can be used to perform minimally invasive extraction with the assistance of an endoscope.

Objective To observe the value of semi-quantitative parameters related to gated myocardial perfusion imaging(G-MPI)for predicting occurrence of major adverse cardiovascular events(MACE)in patients with chronic kidney disease(CKD).Methods Totally 148 CKD patients who underwent rest G-MPI(R-GMPI)(R-GMPI group,n=95)or stress/rest G-MPI(S/R-GMPI)(S/R-GMPI group,n=53)were retrospectively included.The patients were categorized into MACE subgroup and non-MACE subgroup according to MACE occurred or not during follow-up.Clinical data and G-MPI parameters were compared between subgroups,and independent predictors of MACE in CKD patients were obtained using multivariate Cox proportional hazards regression analysis.Receiver operating characteristic(ROC)curve was drawn,the area under the curve(AUC)was calculated to assess the efficacy of each independent predictor for predicting MACE.Among patients who underwent only R-GMPI,the optimal cut-off value of each parameter for predicting MACE was obtained by ROC curve analysis,and the risk of MACE was stratified,then Kaplan-Meier curves were drawn and compared with log-rank test.Results Among 95 patients who underwent only R-GMPI,compared with non-MACE subgroup,those in MACE subgroup had smaller body mass index(BMI)and higher proportion of previous myocardial infarction and hemodialysis,as well as higher R-GMPI left ventricle end-diastolic volume(R-LVEDV),left ventricle end-systolic volume(R-LVESV),sum rest score(R-SRS)but lower left ventricle ejection fraction(R-LVEF)(all P＜0.05),while R-SRS(HR=1.068,95％CI[1.027,1.110])and R-LVESV(HR=1.011,95％CI[1.005,1.017])were both independent predictors for MACE(both P＜0.05).Among 53 patients who underwent S/R-GMPI,compared with non-MACE subgroup,those in MACE subgroup had with higher blood creatinine and lower estimated glomerular filtration rate(eGFR),higher S-LVESV,R-LVEDV,sum stress score(SSS),SRS and sum difference score(SDS)(all P＜0.05),and SDS(HR=1.454,95％CI[1.063,1.989])was an independent predictor for MACE(P＜0.05).Among 95 CKD patients who underwent only R-GMPI,AUC of R-SRS and R-LVESV alone for predicting MACE was 0.659 and 0.694,respectively,and higher incidence of MACE was found in those w ith R-SRS ≥8 points,also in those with R-LVESV ≥91 ml(both P＜0.05).Conclusion G-MPI could be used to evaluate myocardial perfusion and function in CKD patients.For CKD patients just underwent only R-GMPI,R-SRS and R-LVESV were independent predictors for MACE,whereas SDS might be utilized to predict MACE in CKD patients who could undergo S/R-GMPI.

Objective:To evaluate the predictive value of stress+ rest gated myocardial perfusion imaging (G-MPI) in assessing all-cause mortality risk in patients with familial hypercholesterolemia (FH).Methods:From June 2010 to March 2022, 72 patients (39 males, 33 females; age (21.1±12.3) years) who diagnosed with FH clinically and genetically and underwent stress+ rest G-MPI in Beijing Anzhen Hospital, Capital Medical University were retrospectively followed up. Image analysis was performed using the 17-segment 5-point method to obtain left ventricular myocardial perfusion and functional parameters. Patients were followed for all-cause mortality events, and predictors associated with the risk of all-cause mortality were analyzed using Cox regression. The efficiencies of predictors were evaluated by ROC curve analysis, and the Kaplan-Meier method and log-rank test were used to compare the differences in the incidence of all-cause mortality in different groups of patients with FH. Independent-sample t test or Mann-Whitney U test was used to analyze the data. Results:The follow-up time of 72 patients was 7(4, 10) years, and all-cause death occurred in 16(22.2%) patients during the follow-up period. There were statistically significant differences in total cholesterol (TC), low density lipoprotein cholesterol (LDLC), summed stress score (SSS), summed rest score (SRS), summed difference score (SDS), stress end-systolic volume (SESV), stress ejection fraction (SEF), rest end-diastolic volume (REDV), rest end-systolic volume (RESV) and rest ejection fraction (REF) between the death group and the survival group ( t values: from -2.65 to 4.47, z values: from -3.43 to -1.98, all P<0.05). Cox regression analysis showed that SDS (hazard ratio ( HR)=1.337, 95% CI: 1.114-1.604, P=0.002), SESV ( HR=1.019, 95% CI: 1.008-1.030, P<0.001) and LDLC ( HR=1.355, 95% CI: 1.049-1.749, P=0.020) were independent predictors associated with the risk of all-cause mortality in patients with FH. The optimal cut-off value of SESV for predicting mortality in patients with FH determined by ROC curve analysis was 35.5 ml, with the AUC of 0.701 (95% CI: 0.517-0.885). The incidence of all-cause mortality in the group with SESV≥35.5 ml was significantly higher than that in the group with SESV<35.5 ml (28.6% vs 6.9%; χ2=5.15, P=0.023). Conclusion:Stress+ rest G-MPI is an important imaging method for all-cause mortality risk assessment in patients with FH, and SDS, SESV and LDLC are important factors in predicting mortality in patients with FH.

Endodontic diseases are a kind of chronic infectious oral disease.Common endodontic treatment concepts are based on the removal of inflamed or necrotic pulp tissue and the replacement by gutta-percha.However,it is very essential for endodontic treatment to debride the root canal system and prevent the root canal system from bacterial reinfection after root canal therapy(RCT).Recent research,encompassing bacterial etiology and advanced imaging techniques,contributes to our understanding of the root canal system's anatomy intricacies and the technique sensitivity of RCT.Success in RCT hinges on factors like patients,infection severity,root canal anatomy,and treatment techniques.Therefore,improving disease management is a key issue to combat endodontic diseases and cure periapical lesions.The clinical difficulty assessment system of RCT is established based on patient conditions,tooth conditions,root canal configuration,and root canal needing retreatment,and emphasizes pre-treatment risk assessment for optimal outcomes.The findings suggest that the presence of risk factors may correlate with the challenge of achieving the high standard required for RCT.These insights contribute not only to improve education but also aid practitioners in treatment planning and referral decision-making within the field of endodontics.

Chemical cleaning and disinfection are crucial steps for eliminating infection in root canal treatment.However,irrigant selection or irrigation procedures are far from clear.The vapor lock effect in the apical region has yet to be solved,impeding irrigation efficacy and resulting in residual infections and compromised treatment outcomes.Additionally,ambiguous clinical indications for root canal medication and non-standardized dressing protocols must be clarified.Inappropriate intracanal medication may present side effects and jeopardize the therapeutic outcomes.Indeed,clinicians have been aware of these concerns for years.Based on the current evidence of studies,this article reviews the properties of various irrigants and intracanal medicaments and elucidates their effectiveness and interactions.The evolution of different kinetic irrigation methods,their effects,limitations,the paradigm shift,current indications,and effective operational procedures regarding intracanal medication are also discussed.This expert consensus aims to establish the clinical operation guidelines for root canal irrigation and a position statement on intracanal medication,thus facilitating a better understanding of infection control,standardizing clinical practice,and ultimately improving the success of endodontic therapy.