OBJECTIVE: To evaluate the early effectiveness of transosseous suture fixation in treating recurrent acute patellar dislocation with patellar osteochondral fractures (OCFs). METHODS: A retrospective analysis was conducted on 19 patients with recurrent acute patellar dislocation and patellar OCFs, who underwent transosseous suture fixation between January 2018 and December 2022 and were followed up 2 years. The cohort included 8 males and 11 females, aged 13-21 years (mean, 16.2 years). Patients experienced 2-5 times of patellar dislocation (mean, 3.2 times). The interval from the last dislocation to operation ranged from 3 to 15 days (mean, 9.6 days). Preoperative imaging revealed the intra-articular osteochondral fragments and medial patellofemoral ligament (MPFL) injury. Clinical outcomes were evaluated using the visual analogue scale (VAS) score for pain, the International Knee Documentation Committee (IKDC) score, the Hospital for Special Surgery (HSS) knee score, the Lysholm score, and the Tegner score. Postoperative complications were recorded. During follow-up, the knee X-ray films, CT, and MRI were taken to evaluate fragment healing, displacement, and the morphology and tension of the MPFL reconstruction graft. RESULTS: All incisions healed primarily, and no complication occurred such as infection, joint stiffness, patellofemoral arthritis, or redislocation. Patients were followed up 24-60 months (mean, 43.5 months). At 12 months postoperatively and the last follow-up, significant improvements ( P<0.05) were observed in VAS, Lysholm, IKDC, HSS, and Tegner scores compared to preoperative values. Further improvements were observed at last follow-up compared with the 12 months postoperatively, and the differences were significant ( P<0.05). Imaging studies demonstrated satisfactory osteochondral fragment positioning with stable fixation. At last follow-up, all fragments had healed, and MPFL reconstruction grafts exhibited optimal morphology and tension. No joint adhesion or fragment displacement occurred. CONCLUSION For recurrent acute patellar dislocation with patellar OCFs, transosseous suture fixation proves to be both safe and effective, achieving satisfactory early effectiveness.
Humans ; Male ; Female ; Patellar Dislocation/surgery* ; Adolescent ; Young Adult ; Retrospective Studies ; Patella/surgery* ; Suture Techniques ; Treatment Outcome ; Recurrence ; Fracture Fixation, Internal/methods* ; Fractures, Bone/surgery* ; Follow-Up Studies

BACKGROUND:Understanding the characteristics and influencing factors of the gut microbiota in athletes can help determine the optimal gut microbial composition for relevant sport events.Further investigation in this area could provide important insights for improving athletic performance and recovery as well as developing personalized nutrition prescriptions.OBJECTIVE:To summarize the characteristics of gut microbiota in athletes,and to elucidate the important factors influencing the gut microbiota characteristics of athletes from the perspectives of exercise training and dietary intake.METHODS:A literature search was conducted using the PubMed,ScienceDirect,CNKI,WanFang and VIP databases for publications from 2004 to 2024.The search terms included"microbiota,microbiome,athlete,exercise,training,diet,nutrition,dietary fiber,protein,ketogenic,fat"in English and Chinese.After excluding studies of poor quality and irrelevant content,a total of 65 articles were included for review and analysis.RESULTS AND CONCLUSION:(1)The gut microbiota of elite athletes differs from that of the general population,characterized by increased α-diversity,elevated Firmicutes/Bacteroidetes ratio,increased abundance of beneficial bacteria,and enrichment of functional pathways contributing to athletic performance.(2)The type of sport and training load are closely related to the species structure and functional expression of the gut microbiota in athletes.(3)The bidirectional communication between the host and gut microbiota mediated by metabolites is an important mechanism by which exercise influences the gut microbiota.(4)Phase training typically induces adaptive changes in the gut microbiota,and alterations in the structure or function of the microbiota have lasting effects.(5)The type,quantity,and combination of macronutrients intake can significantly influence the structure and function of the gut microbiota,and interact synergistically or antagonistically with exercise training.(6)In the future,it is important to continue the exploration of the gut microbiota in athletes,clarify causal relationships,and establish new targets for exercise training interventions.

BACKGROUND:Implant restoration has become an important means to treat anterior tooth loss,and it is particularly important to select appropriate implant restoration materials.However,at present,there are some deficiencies in clinical implant materials,and researchers have been exploring suitable implant materials.OBJECTIVE:To compare the biomechanical characteristics of implants made of different materials in restoring single missing maxillary anterior teeth.METHODS:The cone beam CT data of a patient with single maxillary central incisor loss were imported into 3-matic software to establish a three-dimensional finite element analysis model of single maxillary anterior tooth loss.The model was then imported into Marc Mentat.Eight sets of implant restoration models were designed according to different implant materials(polyetheretherketone,titanium-zirconium alloy,titanium alloy,and zirconia,with the elastic modulus of the four materials increasing in sequence)and cancellous bone density(high density,low density)to simulate the stress conditions of the maxillary anterior teeth in centric occlusion.The total displacements and von Mises stresses of implants,cortical bone stresses and cancellous bone strains were compared and analyzed.RESULTS AND CONCLUSION:(1)The maximum displacement of the implant gradually decreased with the increase of the modulus of elasticity of the material,and the value of the maximum displacement of the implant in the polyetheretherketone group exceeded 10 μm;the implant stress was concentrated in the labial neck in the models.The maximum stress gradually increased with the increase of the modulus of elasticity of the implant material,among which,the zirconia-low density bone model had the highest stress,which was 21.31 MPa;the cortical bone stress was concentrated in the cortical bone at the junction of the implant with the labial side,and the polyetheretherketone-low density bone group had the highest value,which was 29.90 MPa.(2)From the biomechanical point of view,titanium-zirconium alloy,titanium alloy,and zirconia can be used as implant materials for restoration of a single missing anterior tooth,and implant displacement is one of the common problems during implant restorations,but pure polyetheretherketone material may cause excessive implant displacement in implant restorations of anterior areas,causing implant failure.

BACKGROUND:Understanding the characteristics and influencing factors of the gut microbiota in athletes can help determine the optimal gut microbial composition for relevant sport events.Further investigation in this area could provide important insights for improving athletic performance and recovery as well as developing personalized nutrition prescriptions.OBJECTIVE:To summarize the characteristics of gut microbiota in athletes,and to elucidate the important factors influencing the gut microbiota characteristics of athletes from the perspectives of exercise training and dietary intake.METHODS:A literature search was conducted using the PubMed,ScienceDirect,CNKI,WanFang and VIP databases for publications from 2004 to 2024.The search terms included"microbiota,microbiome,athlete,exercise,training,diet,nutrition,dietary fiber,protein,ketogenic,fat"in English and Chinese.After excluding studies of poor quality and irrelevant content,a total of 65 articles were included for review and analysis.RESULTS AND CONCLUSION:(1)The gut microbiota of elite athletes differs from that of the general population,characterized by increased α-diversity,elevated Firmicutes/Bacteroidetes ratio,increased abundance of beneficial bacteria,and enrichment of functional pathways contributing to athletic performance.(2)The type of sport and training load are closely related to the species structure and functional expression of the gut microbiota in athletes.(3)The bidirectional communication between the host and gut microbiota mediated by metabolites is an important mechanism by which exercise influences the gut microbiota.(4)Phase training typically induces adaptive changes in the gut microbiota,and alterations in the structure or function of the microbiota have lasting effects.(5)The type,quantity,and combination of macronutrients intake can significantly influence the structure and function of the gut microbiota,and interact synergistically or antagonistically with exercise training.(6)In the future,it is important to continue the exploration of the gut microbiota in athletes,clarify causal relationships,and establish new targets for exercise training interventions.

BACKGROUND:Implant restoration has become an important means to treat anterior tooth loss,and it is particularly important to select appropriate implant restoration materials.However,at present,there are some deficiencies in clinical implant materials,and researchers have been exploring suitable implant materials.OBJECTIVE:To compare the biomechanical characteristics of implants made of different materials in restoring single missing maxillary anterior teeth.METHODS:The cone beam CT data of a patient with single maxillary central incisor loss were imported into 3-matic software to establish a three-dimensional finite element analysis model of single maxillary anterior tooth loss.The model was then imported into Marc Mentat.Eight sets of implant restoration models were designed according to different implant materials(polyetheretherketone,titanium-zirconium alloy,titanium alloy,and zirconia,with the elastic modulus of the four materials increasing in sequence)and cancellous bone density(high density,low density)to simulate the stress conditions of the maxillary anterior teeth in centric occlusion.The total displacements and von Mises stresses of implants,cortical bone stresses and cancellous bone strains were compared and analyzed.RESULTS AND CONCLUSION:(1)The maximum displacement of the implant gradually decreased with the increase of the modulus of elasticity of the material,and the value of the maximum displacement of the implant in the polyetheretherketone group exceeded 10 μm;the implant stress was concentrated in the labial neck in the models.The maximum stress gradually increased with the increase of the modulus of elasticity of the implant material,among which,the zirconia-low density bone model had the highest stress,which was 21.31 MPa;the cortical bone stress was concentrated in the cortical bone at the junction of the implant with the labial side,and the polyetheretherketone-low density bone group had the highest value,which was 29.90 MPa.(2)From the biomechanical point of view,titanium-zirconium alloy,titanium alloy,and zirconia can be used as implant materials for restoration of a single missing anterior tooth,and implant displacement is one of the common problems during implant restorations,but pure polyetheretherketone material may cause excessive implant displacement in implant restorations of anterior areas,causing implant failure.

Objective To analyze the lumbar/hip imaging and surface electromyography data of professional equestrian riders,to understand the incidence of chronic diseases in the hip and lower back of the rider,and to explore the causes of chronic pain in riders.Methods Twenty-five equestrian riders from the Shanghai Equestrian Sports Management Center were divided into chronic lower-back pain and chronic hip pain groups.Twelve healthy subjects without hip or lower-back pain were included in the control group.Medical history,X-ray,and magnetic resonance imaging of the hip and lower back,and surface electromyography data of the core muscle were collected.Results The JOA score of the lumbar spine in patients with chronic lower-back pain was significantly lower than that in the control group(P<0.05).The riders had relatively mild chronic hip pain,but the Harris score was significantly lower than that of the control group(P<0.05).The JOA score of the equestrian rider's waist significantly correlated with the Pfirrmann grading.However,the visual analog scale and Harris hip pain scores were not significantly correlated with imaging parameters.The root mean square amplitudes of the rectus abdominis,erector spinalis,rectus femoris,gluteus medius,and multifidus were greater in the riding position than in the normal sitting position(P<0.05).Conclusions The cause of chronic lower-back pain in riders may be related to soft tissue overwork and lumbar degeneration.Changes in the lumbar-hip sagittal sequence pelvic and sacral inclination angles can reflect the degree of lumbar stiffness of the riders.

Objective:To analyze the site of vestibular nerve damaged in patients with acute vestibular neuritis. Methods:Fifty-seven patients with acute vestibular neuritis were recruited, and each patient underwent caloric irrigation test, video head impulse test（vHIT） and vestibular evoked myogenic potentials（VEMPs）. The results were further analyzed. Results:Analysis of abnormal rates of different vestibular function tests: the abnormal rate of caloric irrigation test, horizontal semicircular canal vHIT, anterior semicircular canal vHIT, and posterior semicircular canal vHIT were 92.98%, 92.98%, 92.98%, and 52.63%, respectively. The abnormal rate of cervical vestibular evoked myogenic potentials（cVEMP） and ocular vestibular evoked myogenic potentials（oVEMP） were 52.63% and 89.47%. The abnormal rate of caloric irrigation test, horizontal semicircular canal vHIT, anterior semicircular canal vHIT, and oVEMP were significantly higher than posterior semicircular canal vHIT and cVEMP（P<0.01）. Combination analysis of different vestibular function tests: there are twenty-six patients（45.61%, superior and inferior vestibular nerve） with abnormal caloric irrigation test, video head impulse test, and VEMPs. There are twenty-five patients（43.86%, superior vestibular nerve） with abnormal caloric irrigation test, horizontal semicircular canal vHIT, anterior semicircular canal vHIT, and oVEMP. There are 4 patients（7.02%, inferior vestibular nerve） with abnormal posterior semicircular canal vHIT and cVEMP. There are two patients（3.51%, ampullary vestibular nerve） with abnormal caloric irrigation test, horizontal semicircular canal vHIT, and anterior semicircular canal vHIT. The rate of superior and inferior vestibular neuritis and superior vestibular neuritis were significantly higher than inferior vestibular neuritis and ampullary vestibular neuritis（P<0.01）. Conclusion:Acute vestibular neuritis subtypes can be divided into four categories: superior and inferior vestibular neuritis, superior vestibular neuritis, inferior vestibular neuritis, and ampullary vestibular neuritis. Video head impulse test can accurately assess the site of vestibular nerve damage in patients with acute vestibular neuritis. In addition, vHIT combined with VEMPs can provide objective evidence for the diagnosis of ampullary vestibular neuritis.
Humans ; Vestibular Neuronitis/diagnosis* ; Vestibule, Labyrinth ; Vestibular Nerve ; Semicircular Canals ; Head Impulse Test/methods*

Objective: To explore the biomechanical characteristics of short implants with different diameters in mandibular molars with severe jaw absorption, and to provide theoretical basis for the application of short implants in mandibular molar area. Methods: CBCT data of patient were imported into Mimics and 3-Matic, and the finite element model of mandibular second molar repaired with short implant with diameter of 5.5 mm or 6.5 mm and length of 7 mm was established. The data were imported into three-dimensional finite element analysis software Marc Mentat, and high or low density bone was set up. An axial or buccal load of 150 N was applied to simulate clinical situation. A total of 8 models were established. Cortical bone stress, cancellous bone strain and implant displacement were calculated and analyzed. Results: The cortical bone stress was concentrated in the neck of implant, and the cancellous bone strain was mainly distributed in the apical area of implant. The maximum values of cortical bone stress, cancellous bone strain and implant displacement were higher in buccal loading model than those in axial loading model, and they were higher in low density bone model than those in high density bone model under the same conditions. When the 5.5 mm diameter implant was loaded in buccal direction and the surrounding bone density was low, the maximum strain of cancellous bone was greater than the upper limit of physiological absorption of bone tissue 3 000 μstrain. Conclusion The application of short implants in mandibular molars with insufficient vertical bone mass is a feasible restoration scheme. But for patients with low bone mineral density, large diameter short implants can be appropriately selected, and the occlusal area and the cusp inclination can be appropriately reduced, so as to reduce the lateral force and obtain the stability and success of the implant in the short and long term.

Radical prostatectomy(RP)was commonly used in localized prostate cancer. For patients with adverse pathological features (APF) after RP, it was controversial about choosing adjuvant radiotherapy or salvage radiotherapy (SRT). Recent studies have found that early salvage radiotherapy(ESRT) had both the same cancer control and reduced overtreatment compared to adjuvant radiotherapy. Nomogram and Gene Classifier(GC) could predict the risk of recurrence after RP and contribute to choose adjuvant radiotherapy or ESRT. PSMA PET/CT was more sensitive to detect distant metastasis after biochemical recurrence, which was helpful to decide whether to implement SRT.

Objective : To investigate the effects of different root canal filling stop on quality of root canal filling and apical sealing in root canals obturated with GuttaFlow. Methods: 60 teeth were randomly divided into three groups, using different root canal filling stops to shape the root canals with MTwo (25/06) file. All root canals were obturated with Gutta Flow, and the overfilling of the root canals were recorded and evaluated by X-ray. And the apical microleakage of teeth was evaluated by transparent teeth technique. Results: The roots were prepared with MTwo (25/06) as master apical file, the overfilling rate of the root canals in root canal filling stop was higher as the distance from the apex was shorter, but there was no significant difference. The under-filling rate of the root canals in root canal filling stop was higher as the distance from the apex was longer. And the under-filled root canals in root canal filling stop 0.5 mm from the apex showed a statistically significant difference with 2 mm. The mean dyeing penetration length in 0.5 mm and 1 mm group was significantly shorter than 2 mm group. Conclusion A suitable root canal filling stop could improve the quality of root canal filling in root canals obturated with GuttaFlow.