Objective: To investigate the relationships among psychological resilience, parental control, and behavioral problems in middle school students, aiming to provide evidencebased recommendations for the prevention and intervention of behavioral issues in middle school students, as well as for the development of related policies. Methods: A stratified cluster sampling method was used to select 2 745 participants from three cities in Guizhou Province with different levels of economic development from August to December 2021. The Child Behavior Checklist (CBCL), Parental Control Questionnaire, and Psychological Resilience Questionnaire were administered to junior high school students and their parents. A network analysis method was employed to construct a network analysis model of factors influencing behavioral problems. Results: The detection rate of behavioral problems among junior high school students in Guizhou Province was 22.62%. The scores for psychological resilience (goal focus, emotional control, positive cognition, family support, and interpersonal assistance) and proactive inquiry in behavior control were higher in the group without behavioral problems than in the group with behavioral problems. Scores for psychological control (inducing guilt, with drawing affection, and asserting authority) were higher in the group with behavioral problems than in the group without behavioral problems, with statistically significant differences (t=9.80, 17.76, 6.21, 12.20, 13.18, 6.28, 11.58, 11.10, 10.74, P<0.05). The network model showed that among the same variable factors, the strongest connection weight was between inducing guilt and withdrawing affection, with a weight of 0.79. Between different variables, there were negative correlation between behavioral problems and psychological resilience (goal focus, emotional control, positive cognition, family support, interpersonal assistance) and behavior control (proactive inquiry, behavioral restraint) with correlation coefficients (r=-0.25, -0.42, -0.16, -0.31, -0.33, -0.17, -0.03, P<0.05), respectively. There were positive correlation between psychological control factors (inducing guilt, withdrawing affection, and asserting authority) and behavioral problems (r=0.29, 0.27, 0.27), and a negative correlation between these psychological control factors and psychological resilience factors (goal focus, emotional control, positive cognition, family support, interpersonal assistance)(r=-0.53--0.13)(P<0.05). The strongest connection weight was between withdrawing affection and family support, with a connection weight of -0.53. Family support was an important bridge symptom connecting the entire behavioral problem network model, with a high centrality. Conclusions The detection rate of behavioral problems among junior high school students in Guizhou Province is relatively high. Assisting adolescents in establishing a supportive family environment facilitates the cultivation of their psychological resilience, thereby mitigating the occurrence of behavioral problems.

Currently,human health due to corona virus disease 2019(COVID-19)pandemic has been seriously threatened.The coronavirus severe acute respiratory syndrome coronavirus 2(SARS-CoV-2)spike(S)protein plays a crucial role in virus transmission and several S-based therapeutic approaches have been approved for the treatment of COVID-19.However,the efficacy is compromised by the SARS-CoV-2 evolvement and mutation.Here we report the SARS-CoV-2 S protein receptor-binding domain(RBD)inhibitor licorice-saponin A3(A3)could widely inhibit RBD of SARS-CoV-2 variants,including Beta,Delta,and Omicron BA.1,XBB and BQ1.1.Furthermore,A3 could potently inhibit SARS-CoV-2 Omicron virus in Vero E6 cells,with EC50 of 1.016 pM.The mechanism was related to binding with Y453 of RBD deter-mined by hydrogen-deuterium exchange mass spectrometry(HDX-MS)analysis combined with quan-tum mechanics/molecular mechanics(QM/MM)simulations.Interestingly,phosphoproteomics analysis and multi fluorescent immunohistochemistry(mIHC)respectively indicated that A3 also inhibits host inflammation by directly modulating the JNK and p38 mitogen-activated protein kinase(MAPK)path-ways and rebalancing the corresponding immune dysregulation.This work supports A3 as a promising broad-spectrum small molecule drug candidate for COVID-19.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Humans ; China/epidemiology* ; SARS-CoV-2 ; COVID-19

Consecutively hospitalized patients with confirmed coronavirus disease 2019 (COVID-19) in Wuhan, China were retrospectively enrolled from January 2020 to March 2020 to investigate the association between the use of renin-angiotensin system inhibitor (RAS-I) and the outcome of this disease. Associations between the use of RAS-I (angiotensin-converting enzyme inhibitor (ACEI) or angiotensin receptor blocker (ARB)), ACEI, and ARB and in-hospital mortality were analyzed using multivariate Cox proportional hazards regression models in overall and subgroup of hypertension status. A total of 2771 patients with COVID-19 were included, with moderate and severe cases accounting for 45.0% and 36.5%, respectively. A total of 195 (7.0%) patients died. RAS-I (hazard ratio (HR)= 0.499, 95% confidence interval (CI) 0.325-0.767) and ARB (HR = 0.410, 95% CI 0.240-0.700) use was associated with a reduced risk of all-cause mortality among patients with COVID-19. For patients with hypertension, RAS-I and ARB applications were also associated with a reduced risk of mortality with HR of 0.352 (95% CI 0.162-0.764) and 0.279 (95% CI 0.115-0.677), respectively. RAS-I exhibited protective effects on the survival outcome of COVID-19. ARB use was associated with a reduced risk of all-cause mortality among patients with COVID-19.
Angiotensin Receptor Antagonists/therapeutic use* ; Angiotensin-Converting Enzyme Inhibitors/therapeutic use* ; COVID-19 ; Humans ; Hypertension/drug therapy* ; Renin-Angiotensin System ; Retrospective Studies

Objective:To discuss the influencing factors of neonatal scalp hematoma, and provide a basis for reducing the occurrence of neonatal scalp hematoma.Methods:Retrospectively analyzed the data of 13 151 parturients and their newborn infants who delivered in the Hangzhou Women′s Hospital from January to December 2020, counted the incidence of neonatal scalp hematoma, and Logistic regression analysis was used to analyze its influencing factors.Results:Among 13 151 newborn baby, 68 cases of neonatal head hematoma occurred, the incidence was 0.52%. Vaginal delivery, forceps, intraspinal analgesia were statistically significant in the occurrence of neonatal scalp hematoma ( χ2=19.26, 19.59, 6.11, all P<0.05). Conclusions:Vaginal delivery, forceps, and intraspinal analgesia are the risk factors for neonatal scalp hematoma. Lateral perineal incision during delivery did not reduce the incidence of neonatal scalp hematoma. In this study, many cases of neonatal scalp hematoma occurred before the crown of the fetal head. Labor management, improve the rate of non-drug analgesia, promote natural delivery, early detection, early prevention, and reduce the incidence of neonatal hematoma.