Background: This study aimed to determine whether a shorter high-dose rifampicin regimen is non-inferior to the standard 6-month tuberculosis regimen. Methods: This multicenter, randomized, open-label, non-inferiority trial enrolled participants with respiratory specimen positivity by Xpert MTB/RIF assay or Mycobacterium tuberculosis culture without rifampicin-resistance. Participants were randomized at 1:1 to the investigational or control group. The investigational group received high-dose rifampicin (30 mg/kg/day), isoniazid, and pyrazinamide until culture conversion, followed by high-dose rifampicin and isoniazid for 12 weeks. The control group received the standard 6-month regimen. The primary outcome was the rate of unfavorable outcomes at 18 months post-randomization. The non-inferiority margin was set at <6% difference in unfavorable outcomes rates. The study is registered with ClinicalTrials.gov (NCT04485156) Results: Between 4 November 2020 and 3 January 2022, 76 participants were enrolled. Of these, 58 were included in the modified intention-to-treat analysis. Unfavorable outcomes occurred in 10 (31.3%) of 32 in the control group and 10 (38.5%) of 26 in the investigational group. The difference was 7.2% (95% confidence interval, ∞ to 31.9%), failing to prove non-inferiority. Serious adverse events and grade 3 or higher adverse events did not differ between the groups. Conclusion The shorter high-dose rifampicin regimen failed to demonstrate non-inferiority but had an acceptable safety profile.

Background: We investigated whether nutritional intake is associated with physical activity (PA) and handgrip strength (HGS) in individuals with airflow limitation. Methods: This study analyzed data from the 2014 and 2016 Korean National Health and Nutrition Examination Survey. We assessed total protein intake (g/day), caloric intake (kcal/day), and other nutritional intakes, using a 24-hour dietary recall questionnaire. HGS was measured three times for each hand using a digital grip strength dynamometer, and PA was assessed as health-enhancing PA. Airflow limitation was defined as a forced expiratory volume/forced vital capacity ratio of 0.7 in individuals over 40 years of age. Participants were categorized into groups based on their PA levels and HGS measurements: active aerobic PA vs. non-active aerobic PA, and normal HGS vs. low HGS. Results: Among the 622 individuals with airflow limitation, those involved in active aerobic PA and those with higher HGS had notably higher total food, calorie, water, protein, and lipid intake. The correlations between protein and caloric intake with HGS were strong (correlation coefficients=0.344 and 0.346, respectively). The forest plots show that higher intakes of food, water, calories, protein, and lipids are positively associated with active aerobic PA, while higher intakes of these nutrients are inversely associated with low HGS. However, in the multivariate logistic regression analysis, no significant associations were observed between nutritional intake and active aerobic PA or HGS. Conclusion Nutritional intake was found to not be an independent factor associated with PA and HGS. However, the observed correlations suggest potential indirect effects that warrant further investigation.

Objectives: Lonely death is defined as “a person living in a state of social isolation, disconnected from family, relatives, and others, who dies from suicide, illness, or other causes”. This study investigated the characteristics of individuals who die alone in Korea. Methods: We constructed a database of lonely death cases by linking data from the Korea Crime Scene Investigation Unit of the Korea National Police Agency with National Health Insurance Service (NHIS) records. A descriptive analysis was performed to evaluate the demographics, underlying diseases, and healthcare utilization patterns among lonely death cases. Results: Among the 3122 individuals identified as lonely death cases, 2621 (84.0%) were male and 501 (16.0%) were female. The most common age group was 50-59 years (n=930, 29.8%). The NHIS covered 2161 individuals (69.2%), whereas 961 individuals (30.8%) were enrolled in Medical Aid (MA). The highest number of lonely deaths occurred in Seoul areas, with 1468 cases (47.0%). Mood disorders were diagnosed in 1020 individuals (32.7%), and various alcohol-related diseases, including alcoholic liver disease, were also observed. Outpatient visits increased leading up to death but declined in the final 3 months, while hospitalizations decreased and emergency room visits slightly increased. Conclusions Most lonely death cases involved male in their 50s, with a disproportionately high number of MA beneficiaries compared to the general population. Many of these individuals also experienced mental health issues or alcohol-related disorders. Preventing social isolation and strengthening social safety nets are critical to reducing the occurrence of lonely deaths.

Background and Objectives: The risk profiles, procedural characteristics, and clinical outcomes for women undergoing bifurcation percutaneous coronary intervention (PCI) are not well defined compared to those in men. Methods: COronary BIfurcation Stenting III (COBIS III) is a multicenter, real-world registry of 2,648 patients with bifurcation lesions treated with second-generation drug-eluting stents.We compared the angiographic and procedural characteristics and clinical outcomes based on sex. The primary outcome was 5-year target lesion failure (TLF), a composite of cardiac death, myocardial infarction, and target lesion revascularization. Results: Women (n=635, 24%) were older, had hypertension and diabetes more often, and had smaller main vessel and side branch reference diameters than men. The pre- and post-PCI angiographic percentage diameter stenoses of the main vessel and side branch were comparable between women and men. There were no differences in procedural characteristics between the sexes. Women and men had a similar risk of TLF (6.3% vs. 7.1%, p=0.63) as well as its individual components and sex was not an independent predictor of TLF. This finding was consistent in the left main and 2 stenting subgroups. Conclusions In patients undergoing bifurcation PCI, sex was not an independent predictor of adverse outcome.

Background: The World Health Organization has declared the end of the coronavirus disease 2019 (COVID-19) public health emergency. However, this did not indicate the end of COVID-19. Several months after the infection, numerous patients complain of respiratory or nonspecific symptoms; this condition is called long COVID. Even patients with mild COVID-19 can experience long COVID, thus the burden of long COVID remains considerable. Therefore, we conducted this study to comprehensively analyze the effects of long COVID using multi-faceted assessments. Materials and Methods: We conducted a prospective cohort study involving patients diagnosed with COVID-19 between February 2020 and September 2021 in six tertiary hospitals in Korea. Patients were followed up at 1, 3, 6, 12, 18, and 24 months after discharge. Long COVID was defined as the persistence of three or more COVID-19-related symptoms. The primary outcome of this study was the prevalence of long COVID after the period of COVID-19. Results: During the study period, 290 patients were enrolled. Among them, 54.5 and 34.6% experienced long COVID within 6 months and after more than 18 months, respectively. Several patients showed abnormal results when tested for post-traumatic stress disorder (17.4%) and anxiety (31.9%) after 18 months. In patients who underwent follow-up chest computed tomography 18 months after COVID-19, abnormal findings remained at 51.9%. Males (odds ratio [OR], 0.17; 95% confidence interval [CI], 0.05–0.53; P=0.004) and elderly (OR, 1.04; 95% CI, 1.00–1.09; P=0.04) showed a significant association with long COVID after 12–18 months in a multivariable logistic regression analysis. Conclusion Many patients still showed long COVID after 18 months post SARS-CoV-2 infection. When managing these patients, the assessment of multiple aspects is necessary.

Background/Aims: Self-expandable metallic stents (SEMSs) are widely used as palliative or bridge to surgery treatments in patients with malignant colorectal obstruction (MCO). Stent occlusion is more common with uncovered stents, but stent migration is more common with covered stents. Our purpose was to compare the efficacy and safety of a newly designed covered SEMS with an uncovered proximal flared end (CSEMS-UPF) with that of the conventional uncovered SEMS (UCSEMS) in the treatment of MCO. Methods: This prospective randomized trial was conducted at a tertiary-care academic hospital. We enrolled 87 patients with stage 4 cancer and MCO: colorectal cancer in 60 patients and extracolonic cancer in 27 patients. Insertion of UCSEMS was randomly assigned to 43 patients, and 44 patients received the CSEMS-UPF. The primary outcome was the duration of stent patency after successful placement. The secondary outcomes were the number of patients with technical and clinical success and early and late complications from the stent insertion. Results: The median patency of the stent did not differ between the UCSEMS and CSEMS-UPF groups (484 [231–737] days vs. 216 [66–366] days, P= 0.242). The technical and clinical success rates did not differ significantly between the groups, either (100.0% vs. 93.2%, respectively, P= 0.241; 100.0% vs. 92.7%, respectively, P= 0.112), nor did the early (n = 2 [4.7%] vs. n = 4 [9.8%], P> 0.999) or late (n = 12 [27.9%] vs. n = 15 [36.6%], P> 0.999) stent complication rates differ between the groups. Conclusions The UCSEMS and newly developed CSEMS-UPF are similarly effective treatments for MCO, with no differences in the stent migration or occlusion rates (Clinical trial registration number: NCT02640781).

Background: This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS). Methods: Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied. Results: With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions. Conclusions The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.

Background: The removal of a well-fixed acetabular cup is a challenging, labor-intensive, and time-consuming step during revision hip arthroplasty. Although the advent of the manual osteotome, Explant, has simplified the procedure, it is still a stressful process as it dissipates the surgeon’s strength and time and risks an iatrogenic pelvic fracture. Recently, EZX, a powered tool for extraction of well-fixed acetabular cups with semicircular blade was invented. This study aimed to compare Explant and EZX in an experimental condition for their efficacy and safety. Methods: Cementless acetabular cups were press-fitted to 20 hemipelvic polyurethane models using foam adhesives. Ten cups were removed with each tool for comparison of the elapsed time, loads on the entire hemipelvis, periacetabular strain and temperature, volume of periacetabular bone removed, and diameter of the remaining acetabular rim. Strains and loads were quantitatively assessed using strain gauges and load cells for precise and reliable measurements. Results: The mean duration required to remove a well-fixed cup with EZX was 38.5 seconds (range, 25–55), whereas that with Explant was 543.7 seconds (range, 214–1,051) (p < 0.001). The load on the entire hemipelvis with EZX (mean, 9.1 kgf; range, 6.4–11.3) was 33% lower than that with Explant (mean, 13.6 kgf; range, 9.2–17.1) (p < 0.001). The periacetabular peak strains at the 3 positions with EZX were significantly lower than those with Explant (p < 0.001). The temperature during the removal did not differ significantly between the 2 tools. Although the mean volume of bone loss with Explant was 2.4 mL more than that with EZX (p < 0.001), the mean diameters of the remaining acetabular rim were not significantly different, measuring 54.1 mm with both tools. Conclusions The present experiment revealed that a well-fixed cup could be removed using a powered tool with less strength and time and less load on the entire pelvis. Although the powered tool removed a larger volume of bone, the diameters of the remaining acetabular rims were equivalent. This tool may help surgeons remove well-fixed cups in a short time and reduce the deforming load on the bone around the cup without increasing the size of the subsequent reconstruction cup.

Background: This study aimed to evaluate the applicability of deep learning technology to thyroid ultrasound images for classification of thyroid nodules. Methods: This retrospective analysis included ultrasound images of patients with thyroid nodules investigated by fine-needle aspiration at the thyroid clinic of a single center from April 2010 to September 2012. Thyroid nodules with cytopathologic results of Bethesda category V (suspicious for malignancy) or VI (malignant) were defined as thyroid cancer. Multiple deep learning algorithms based on convolutional neural networks (CNNs) —ResNet, DenseNet, and EfficientNet—were utilized, and Siamese neural networks facilitated multi-view analysis of paired transverse and longitudinal ultrasound images. Results: Among 1,048 analyzed thyroid nodules from 943 patients, 306 (29%) were identified as thyroid cancer. In a subgroup analysis of transverse and longitudinal images, longitudinal images showed superior prediction ability. Multi-view modeling, based on paired transverse and longitudinal images, significantly improved the model performance; with an accuracy of 0.82 (95% confidence intervals [CI], 0.80 to 0.86) with ResNet50, 0.83 (95% CI, 0.83 to 0.88) with DenseNet201, and 0.81 (95% CI, 0.79 to 0.84) with EfficientNetv2_ s. Training with high-resolution images obtained using the latest equipment tended to improve model performance in association with increased sensitivity. Conclusion CNN algorithms applied to ultrasound images demonstrated substantial accuracy in thyroid nodule classification, indicating their potential as valuable tools for diagnosing thyroid cancer. However, in real-world clinical settings, it is important to aware that model performance may vary depending on the quality of images acquired by different physicians and imaging devices.

To investigate the relationship between depression and AD, water avoidance stress (WAS) was induced for 10 days in both Tg2576 mice and wild-type (WT) mice. After WAS, memory function and depressive-like behavior were investigated in Tg2576 mice. Tg2576 WAS mice exhibited more depressive-like behaviors than WT WAS and Tg2576 control (CON) mice. Strikingly, Tg2576 CON mice showed more depressive-like behaviors than WT mice. Moreover, corticosterone and phospho-glucocorticoid receptor (p-GR) levels were also higher in Tg2576 WAS mice in comparison to Tg2576 CON mice. Spinster homologue 2 (SPNS2) is a member of non-ATP-dependent transporter. The role of SPNS2 was widely known as a sphingosine-1-phosphate (S1P) transporter, which export intracellular S1P from cells. Using GEO database to analyze SPNS2 gene expression changes in patients with AD and depression, we show that SPNS2 gene expression correlates with AD and depression. Interestingly, Tg2576 WAS mice displayed significantly increased levels of SPNS2 w1hen compared to Tg2576 CON counterparts. SPNS2 levels were also higher in Tg2576 CON mice in comparison with WT CON mice. Remarkably, we found a decrease in S1P brain levels and an increase in S1P serum levels of Tg2576 WAS mice in comparison with Tg2576 CON mice. Accordingly, WAS induced group further decreased S1P levels in the brains. However, the level in the serum further increased in comparison with non-induced group. Therefore, these results suggest that AD and depression could be associated, and that Tg2576 transgenic mice are more susceptible to stress-induced depression through the release of S1P by SPNS2 up-regulation.