Background: High-mobility group box protein 1 (HMGB1) is a chromatin-binding protein involved in arthritis, ischemia, sepsis, atherosclerosis, neurodegenerative disorders, meningitis, and cancer. HMGB1 exhibits dual roles in cancer, acting as either a tumor suppressor or oncoprotein depending on context. Objective: This research aimed to elucidate HMGB1’s functional significance in cutaneous squamous cell carcinoma (cSCC). Methods: We overexpressed HMGB1 in cSCC cell lines using recombinant adenovirus and examined its effects on cell proliferation, colony formation, and cell migration. Results: Immunohistochemical analysis revealed elevated HMGB1 expression levels in cSCC tissue relative to normal epidermis. To assess the influence of HMGB1, we employed recombinant adenoviruses expressing HMGB1 to transduce SCC cell lines (SCC12 and SCC13). Enhanced HMGB1 expression significantly promoted cellular proliferation and colony formation capacity.Notably, HMGB1 overexpression elevated the levels of proliferation regulators, including P63, SOX2, CDK4 and CDK6. Furthermore, HMGB1 overexpression substantially enhanced tumor invasiveness, accompanied by upregulation of epithelial-mesenchymal transition (EMT) biomarkers. Mechanistically, overexpression of HMGB1 enhanced transforming growth factor-β signaling by increasing phosphorylation of SMAD2/3, the key mediators of EMT. Conclusion These data imply that HMGB1 acts as a tumor-promoting factor in cSCC.

Using a novel(OH)n-C60@SiO2@Tm2O3@Ca5(PO4)3(OH)quaternary nano-particles/cross-linked chitosan coated open-tubular capillary column(QNPsC-OTCC)as the analytical column,a new method for highly selective determination of taurine(TAU)in functional drinks using pre-column derivatization capillary electrochromatography coupled with electrochemiluminescence(CEC-ECL)detection was established.In the experiments,it was found that adding hexamethylenetetramine as a co-catalyst in N-methylation derivative reaction could quantitatively convert TAU into a single derivative product that cuold be detected by ECL.With the help of Ru(bpy)32+reagent,the ECL peak intensity of TAU derivative was increased by more than 1000 times compared to the original TAU.In addition,a Ru-containing d-f cyano-bridged heterometallic coordination polymer modified platinum electrode was used instead of a bare platinum electrode as working electrode for ECL detection,which resulted in a further increase of the peak response of TAU derivatives about 5.7 times.Under optimized analytical conditions,by using betastatin hydrochloride(BSH)as the internal standard and simultaneously derivatized with TAU,the relative ratio of peak intensity of TAU and BSH derivatives showed a linear relationship with the initial TAU concentration in a two-segment ranges of 0.2-6.0 mmol/L and 6.0-10 mmol/L.The limit of detection of TAU was 0.09 mmol/L(S/N=3).The developed method was applied to determination of TAU contents in four commercial functional drink samples,and the relative standard deviations(RSDs)for relative intensity ratio were less than 0.9％,and the recoveries were in the range of 95.0％～102.0％,indicating good practicability of the method.

The scaphoid bone is one of the important bone of hand,which is frequently injured and difficult to treat in clinical practice.Therefore,it is very important to deeply study the microstructure and biomechanical characteristics of the scaphoid bone for understanding its injury mechanism and optimizing treatment scheme.Microcomputed tomography(micro-CT)provides high-resolution imaging of bone tissue,while finite element analysis can help to simulate the stress distribution and behavioral patterns of the scaphoid bone under various physiological and pathological states.The high-resolution three-dimensional image of the scaphoid bone obtained by micro-CT technology can be used to construct finite element models of real anatomical structure of the scaphoid bone,thus achieving accurate simulation of the mechanical properties of the scaphoid bone.The fusion of these two advanced technologies provides a new perspective for revealing the structural and functional relationships and injury mechanism of the scaphoid bone.Therefore,this paper reviews the anatomical characteristics of the scaphoid bone and its biomechanical behavior in different states,emphasizing the specific applications and advantages of micro-CT and finite element analysis techniques in the study of the scaphoid bone.By summarizing the research findings in recent years,this paper provides novel scientific basis and methods for the diagnosis,treatment,and prevention of scaphoid bone-related disorders.

The scaphoid bone is one of the important bone of hand,which is frequently injured and difficult to treat in clinical practice.Therefore,it is very important to deeply study the microstructure and biomechanical characteristics of the scaphoid bone for understanding its injury mechanism and optimizing treatment scheme.Microcomputed tomography(micro-CT)provides high-resolution imaging of bone tissue,while finite element analysis can help to simulate the stress distribution and behavioral patterns of the scaphoid bone under various physiological and pathological states.The high-resolution three-dimensional image of the scaphoid bone obtained by micro-CT technology can be used to construct finite element models of real anatomical structure of the scaphoid bone,thus achieving accurate simulation of the mechanical properties of the scaphoid bone.The fusion of these two advanced technologies provides a new perspective for revealing the structural and functional relationships and injury mechanism of the scaphoid bone.Therefore,this paper reviews the anatomical characteristics of the scaphoid bone and its biomechanical behavior in different states,emphasizing the specific applications and advantages of micro-CT and finite element analysis techniques in the study of the scaphoid bone.By summarizing the research findings in recent years,this paper provides novel scientific basis and methods for the diagnosis,treatment,and prevention of scaphoid bone-related disorders.

Bacterial biofilms gave rise to persistent infections and multi-organ failure, thereby posing a serious threat to human health. Biofilms were formed by cross-linking of hydrophobic extracellular polymeric substances (EPS), such as proteins, polysaccharides, and eDNA, which were synthesized by bacteria themselves after adhesion and colonization on biological surfaces. They had the characteristics of dense structure, high adhesiveness and low drug permeability, and had been found in many human organs or tissues, such as the brain, heart, liver, spleen, lungs, kidneys, gastrointestinal tract, and skeleton. By releasing pro-inflammatory bacterial metabolites including endotoxins, exotoxins and interleukin, biofilms stimulated the body’s immune system to secrete inflammatory factors. These factors triggered local inflammation and chronic infections. Those were the key reason for the failure of traditional clinical drug therapy for infectious diseases.In order to cope with the increasingly severe drug-resistant infections, it was urgent to develop new therapeutic strategies for bacterial-biofilm eradication and anti-bacterial infections. Based on the nanoscale structure and biocompatible activity, nanobiomaterials had the advantages of specific targeting, intelligent delivery, high drug loading and low toxicity, which could realize efficient intervention and precise treatment of drug-resistant bacterial biofilms. This paper highlighted multiple strategies of biofilms eradication based on nanobiomaterials. For example, nanobiomaterials combined with EPS degrading enzymes could be used for targeted hydrolysis of bacterial biofilms, and effectively increased the drug enrichment within biofilms. By loading quorum sensing inhibitors, nanotechnology was also an effective strategy for eradicating bacterial biofilms and recovering the infectious symptoms. Nanobiomaterials could intervene the bacterial metabolism and break the bacterial survival homeostasis by blocking the uptake of nutrients. Moreover, energy-driven micro-nano robotics had shown excellent performance in active delivery and biofilm eradication. Micro-nano robots could penetrate physiological barriers by exogenous or endogenous driving modes such as by biological or chemical methods, ultrasound, and magnetic field, and deliver drugs to the infection sites accurately. Achieving this using conventional drugs was difficult. Overall, the paper described the biological properties and drug-resistant molecular mechanisms of bacterial biofilms, and highlighted therapeutic strategies from different perspectives by nanobiomaterials, such as dispersing bacterial mature biofilms, blocking quorum sensing, inhibiting bacterial metabolism, and energy driving penetration. In addition, we presented the key challenges still faced by nanobiomaterials in combating bacterial biofilm infections. Firstly, the dense structure of EPS caused biofilms spatial heterogeneity and metabolic heterogeneity, which created exacting requirements for the design, construction and preparation process of nanobiomaterials. Secondly, biofilm disruption carried the risk of spread and infection the pathogenic bacteria, which might lead to other infections. Finally, we emphasized the role of nanobiomaterials in the development trends and translational prospects in biofilm treatment.

Objective To understand the change in distribution and antimicrobial resistance of bacteria isolated from blood specimens of Hunan Province,and provide for the initial diagnosis and treatment of clinical bloodstream infection(BSI).Methods Data reported from member units of Hunan Province Antimicrobial Resistance Survei-llance System from 2012 to 2021 were collected.Bacterial antimicrobial resistance surveillance method was imple-mented according to the technical scheme of China Antimicrobial Resistance Surveillance System(CARSS).Bacteria from blood specimens and bacterial antimicrobial susceptibility testing results were analyzed by WHONET 5.6 soft-ware and SPSS 27.0 software.Results A total of 207 054 bacterial strains were isolated from blood specimens from member units in Hunan Province Antimicrobial Resistance Surveillance System from 2012 to 2021,including 107 135(51.7％)Gram-positive bacteria and 99 919(48.3％)Gram-negative bacteria.There was no change in the top 6 pathogenic bacteria from 2012 to 2021,with Escherichia coli(n=51 537,24.9％)ranking first,followed by Staphylococcus epidermidis(n=29 115,14.1％),Staphylococcus aureus(n=17 402,8.4％),Klebsiella pneu-moniae(17 325,8.4％),Pseudomonas aeruginosa(n=4 010,1.9％)and Acinetobacter baumannii(n=3 598,1.7％).The detection rate of methicillin-resistant Staphylococcus aureus(MRSA)decreased from 30.3％in 2015 to 20.7％in 2021,while the detection rate of methicillin-resistant coagulase-negative Staphylococcus(MRCNS)showed an upward trend year by year(57.9％-66.8％).No Staphylococcus was found to be resistant to vancomy-cin,linezolid,and teicoplanin.Among Gram-negative bacteria,constituent ratios of Escherichia coli and Klebsiella pneumoniae were 43.9％-53.9％and 14.2％-19.5％,respectively,both showing an upward trend(both P＜0.001).Constituent ratios of Pseudomonas aeruginosa and Acinetobacter baumannii were 3.6％-5.1％and 3.0％-4.5％,respectively,both showing a downward trend year by year(both P＜0.001).From 2012 to 2021,resistance rates of Escherichia coli to imipenem and ertapenem were 1.0％-2.0％and 0.6％-1.1％,respectively;presenting a downward trend(P＜0.001).The resistant rates of Klebsiella pneumoniae to meropenem and ertapenem were 7.4％-13.7％and 4.8％-6.4％,respectively,presenting a downward trend(both P＜0.001).The resistance rates of Pseudomonas aeruginosa and Acinetobacter baumannii to carbapenem antibiotics were 7.1％-15.6％and 34.7％-45.7％,respectively.The trend of resistance to carbapenem antibiotics was relatively stable,but has de-creased compared with 2012-2016.The resistance rates of Escherichia coli to the third-generation cephalosporins from 2012 to 2021 were 41.0％-65.4％,showing a downward trend year by year.Conclusion The constituent ra-tio of Gram-negative bacillus from blood specimens in Hunan Province has been increasing year by year,while the detection rate of carbapenem-resistant Gram-negative bacillus remained relatively stable in the past 5 years,and the detection rate of coagulase-negative Staphylococcus has shown a downward trend.

Objective To investigate the distribution and antimicrobial susceptibility of clinically isolated bacteria from intensive care units(ICUs)in hospitals of Hunan Province Antimicrobial Resistance Surveillance System from 2012 to 2021.Methods According to China Antimicrobial Resistance Surveillance System,data of clinically isolated bacterial strains and antimicrobial susceptibility testing results of bacteria from ICUs reported by all member units of Hunan Province Antimicrobial Resistance Surveillance System were analyzed with WHONET 2022 software.Results From 2012 to 2021,the total number of bacteria isolated from ICUs of member units of the Hunan Province Antimi-crobial Resistance Surveillance System was 5 777-22 369,with Gram-negative bacteria accounting for 76.1％-78.0％annually.Staphylococcus aureus ranked first among isolated Gram-positive bacteria each year.The top 5 bacteria among Gram-negative bacteria were Acinetobacter baumannii,Klebsiella pneumoniae,Escherichia coli,Pseudo-monas aeruginosa,and Stenotrophomonas maltophilia.Detection rate of methicillin-resistant Staphylococcus aureus showed a downward trend year by year.No Staphylococcus spp.were found to be resistant to vancomycin,teico-planin and linezolid.Detection rates of vancomycin-resistant Enterococcus faecalis and vancomycin-resistant Entero-coccus faecium were 0.6-1.1％and 0.6％-2.2％,respectively.Resistance rates of Escherichia coli and Kleb-siella pneumoniae to imipenem were 3.1％-5.7％and 7.7％-20.9％,respectively.Resistance rates of Pseudo-monasaeruginosa and Acinetobacter baumannii to imipenem were 24.6％-40.1％and 76.1％-80.9％,respective-ly.Detection rates of carbapenem-resistant Pseudomonas aeruginosa declined year by year.Acinetobacter baumannii maintained high susceptibility to polymyxin B,with resistance rate＜10％.Conclusion Antimicrobial resistance of bacteria from ICUs is serious.Carbapenem-resistant Enterobacteriales has an upward trend after 2019.It is nece-ssary to strengthen the surveillance of bacterial resistance and carry out multidisciplinary collaboration.

OBJECTIVE: This study was aimed at investigating the carrier rate of, and molecular variation in, α- and β-globin gene mutations in Hunan Province. METHODS: We recruited 25,946 individuals attending premarital screening from 42 districts and counties in all 14 cities of Hunan Province. Hematological screening was performed, and molecular parameters were assessed. RESULTS: The overall carrier rate of thalassemia was 7.1%, including 4.83% for α-thalassemia, 2.15% for β-thalassemia, and 0.12% for both α- and β-thalassemia. The highest carrier rate of thalassemia was in Yongzhou (14.57%). The most abundant genotype of α-thalassemia and β-thalassemia was -α ^3.7/αα (50.23%) and β ^IVS-II-654/β ^N (28.23%), respectively. Four α-globin mutations [CD108 (ACC>AAC), CAP +29 (G>C), Hb Agrinio and Hb Cervantes] and six β-globin mutations [CAP +8 (C>T), IVS-II-848 (C>T), -56 (G>C), beta nt-77 (G>C), codon 20/21 (-TGGA) and Hb Knossos] had not previously been identified in China. Furthermore, this study provides the first report of the carrier rates of abnormal hemoglobin variants and α-globin triplication in Hunan Province, which were 0.49% and 1.99%, respectively. CONCLUSION Our study demonstrates the high complexity and diversity of thalassemia gene mutations in the Hunan population. The results should facilitate genetic counselling and the prevention of severe thalassemia in this region.
Humans ; beta-Thalassemia/genetics* ; alpha-Thalassemia/genetics* ; Hemoglobinopathies/genetics* ; China/epidemiology* ; High-Throughput Nucleotide Sequencing

Objective: To assess the efficacy and safety of polymyxin B in neutropenic patients with hematologic disorders who had refractory gram-negative bacterial bloodstream infection. Methods: From August 2021 to July 2022, we retrospectively analyzed neutropenic patients with refractory gram-negative bacterial bloodstream infection who were treated with polymyxin B in the Department of Hematology of the First Affiliated Hospital of the Soochow University between August 2021 to July 2022. The cumulative response rate was then computed. Results: The study included 27 neutropenic patients with refractory gram-negative bacterial bloodstream infections. Polymyxin B therapy was effective in 22 of 27 patients. The median time between the onset of fever and the delivery of polymyxin B was 3 days [interquartile range (IQR) : 2-5]. The median duration of polymyxin B treatment was 7 days (IQR: 5-11). Polymyxin B therapy had a median antipyretic time of 37 h (IQR: 32-70). The incidence of acute renal dysfunction was 14.8% (four out of 27 cases), all classified as "injury" according to RIFLE criteria. The incidence of hyperpigmentation was 59.3%. Conclusion: Polymyxin B is a viable treatment option for granulocytopenia patients with refractory gram-negative bacterial bloodstream infections.
Humans ; Polymyxin B/adverse effects* ; Retrospective Studies ; Gram-Negative Bacterial Infections/complications* ; Fever/drug therapy* ; Sepsis/drug therapy* ; Anti-Bacterial Agents/therapeutic use* ; Bacteremia/complications*

Objective: To understand the population structure of food-borne Staphylococcus (S.) aureus in China. Methods: Whole genome sequencing was used to analyze 763 food-borne S. aureus strains from 16 provinces in China from 2006 to 2020. Multilocus sequence typing (MLST), staphylococcal protein A gene (spa) typing, and staphylococcal chromosome cassettemec (SCCmec) typing were conducted, and minimum spanning tree based on ST types (STs) was constructed by BioNumerics 7.5 software. Thirty-one S. aureus strains isolated from imported food products were also included in constructing the genome phylogenetic tree. Results: A total of 90 STs (20 novel types) and 160 spa types were detected in the 763 S. aureus isolates. The 72 STs (72/90, 80.0%) were related to 22 clone complexes. The predominant clone complexes were CC7, CC1, CC5, CC398, CC188, CC59, CC6, CC88, CC15, and CC25, accounting for 82.44% (629/763) of the total. The STs and spa types in the predominant clone complexes changed over the years. The methicillin-resistant S. aureus (MRSA) detection rate was 7.60%, and 7 SCCmec types were identified. The ST59-t437-Ⅳa (17.24%, 10/58), ST239-t030-Ⅲ (12.07%, 7/58), ST59-t437-Ⅴb (8.62%, 5/58), ST338-t437-Ⅴb (6.90%, 4/58) and ST338-t441-Ⅴb (6.90%, 4/58) were the main types in MRSA strains. The genome phylogenetic tree had two clades, and the strains with the same CC, ST, and spa types clustered together. All CC7 methicillin sensitive S. aureus strains were included in Clade1, while 21 clone complexes and all MRSA strains were in Clade2. The MRSA strains clustered according to the SCCmec and STs. The strains from imported food products in CC398, CC7, CC30, CC12, and CC188 had far distances from Chinese strains in the tree. Conclusions: In this study, the predominant clone complexes of food-borne strains were CC7, CC1, CC5, CC398, CC188, CC59, CC6, CC88, CC15, and CC25, which overlapped with the previously reported clone complexes of hospital and community-associated strains in China, suggesting that close attention needs to be paid to food, a vehicle of pathogen transmission in community and food poisoning.
Humans ; Staphylococcus aureus/genetics* ; Methicillin-Resistant Staphylococcus aureus/genetics* ; Multilocus Sequence Typing ; Phylogeny ; Staphylococcal Infections/epidemiology* ; China/epidemiology*